- 24 3月, 2020 40 次提交
-
-
由 David Sterba 提交于
Thw whole point of csum_tree_block is to iterate over all extent buffer pages and pass it to checksumming functions. The bytes where checksum is stored must be skipped, thus map_private_extent_buffer. This complicates further offset calculations. As the first page will be always present, checksum the relevant bytes unconditionally and then do a simple iteration over the remaining pages. Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: NQu Wenruo <wqu@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
There's an unnecessary indirection in the checksum definition table, pointer and the string itself. The strings are short and the overall size of one entry is now 24 bytes. Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: NQu Wenruo <wqu@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
Having btrfs_alloc_chunk doesn't bring any value since it encapsulates a lockdep assert and a call to find_next_chunk. Simply rename the internal __btrfs_alloc_chunk function to the public one and remove it's 2nd parameter as all callers always pass the return value of find_next_chunk. Finally, migrate the call to lockdep_assert_held so as to not lose the check. Signed-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
I noticed while running my snapshot torture test that we were getting a lot of metadata chunks allocated with very little actually used. Digging into this we would commit the transaction, still not have enough space, and then force a chunk allocation. I noticed that we were barely flushing any delalloc at all, despite the fact that we had around 13gib of outstanding delalloc reservations. It turns out this is because of our btrfs_calc_reclaim_metadata_size() calculation. It _only_ takes into account the outstanding ticket sizes, which isn't the whole story. In this particular workload we're slowly filling up the disk, which means our overcommit space will suddenly become a lot less, and our outstanding reservations will be well more than what we can handle. However we are only flushing based on our ticket size, which is much less than we need to actually reclaim. So fix btrfs_calc_reclaim_metadata_size() to take into account the overage in the case that we've gotten less available space suddenly. This makes it so we attempt to reclaim a lot more delalloc space, which allows us to make our reservations and we no longer are allocating a bunch of needless metadata chunks. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Filipe Manana 提交于
During unmount we can have a job from the delayed inode items work queue still running, that can lead to at least two bad things: 1) A crash, because the worker can try to create a transaction just after the fs roots were freed; 2) A transaction leak, because the worker can create a transaction before the fs roots are freed and just after we committed the last transaction and after we stopped the transaction kthread. A stack trace example of the crash: [79011.691214] kernel BUG at lib/radix-tree.c:982! [79011.692056] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [79011.693180] CPU: 3 PID: 1394 Comm: kworker/u8:2 Tainted: G W 5.6.0-rc2-btrfs-next-54 #2 (...) [79011.696789] Workqueue: btrfs-delayed-meta btrfs_work_helper [btrfs] [79011.697904] RIP: 0010:radix_tree_tag_set+0xe7/0x170 (...) [79011.702014] RSP: 0018:ffffb3c84a317ca0 EFLAGS: 00010293 [79011.702949] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [79011.704202] RDX: ffffb3c84a317cb0 RSI: ffffb3c84a317ca8 RDI: ffff8db3931340a0 [79011.705463] RBP: 0000000000000005 R08: 0000000000000005 R09: ffffffff974629d0 [79011.706756] R10: ffffb3c84a317bc0 R11: 0000000000000001 R12: ffff8db393134000 [79011.708010] R13: ffff8db3931340a0 R14: ffff8db393134068 R15: 0000000000000001 [79011.709270] FS: 0000000000000000(0000) GS:ffff8db3b6a00000(0000) knlGS:0000000000000000 [79011.710699] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [79011.711710] CR2: 00007f22c2a0a000 CR3: 0000000232ad4005 CR4: 00000000003606e0 [79011.712958] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [79011.714205] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [79011.715448] Call Trace: [79011.715925] record_root_in_trans+0x72/0xf0 [btrfs] [79011.716819] btrfs_record_root_in_trans+0x4b/0x70 [btrfs] [79011.717925] start_transaction+0xdd/0x5c0 [btrfs] [79011.718829] btrfs_async_run_delayed_root+0x17e/0x2b0 [btrfs] [79011.719915] btrfs_work_helper+0xaa/0x720 [btrfs] [79011.720773] process_one_work+0x26d/0x6a0 [79011.721497] worker_thread+0x4f/0x3e0 [79011.722153] ? process_one_work+0x6a0/0x6a0 [79011.722901] kthread+0x103/0x140 [79011.723481] ? kthread_create_worker_on_cpu+0x70/0x70 [79011.724379] ret_from_fork+0x3a/0x50 (...) The following diagram shows a sequence of steps that lead to the crash during ummount of the filesystem: CPU 1 CPU 2 CPU 3 btrfs_punch_hole() btrfs_btree_balance_dirty() btrfs_balance_delayed_items() --> sees fs_info->delayed_root->items with value 200, which is greater than BTRFS_DELAYED_BACKGROUND (128) and smaller than BTRFS_DELAYED_WRITEBACK (512) btrfs_wq_run_delayed_node() --> queues a job for fs_info->delayed_workers to run btrfs_async_run_delayed_root() btrfs_async_run_delayed_root() --> job queued by CPU 1 --> starts picking and running delayed nodes from the prepare_list list close_ctree() btrfs_delete_unused_bgs() btrfs_commit_super() btrfs_join_transaction() --> gets transaction N btrfs_commit_transaction(N) --> set transaction state to TRANTS_STATE_COMMIT_START btrfs_first_prepared_delayed_node() --> picks delayed node X through the prepared_list list btrfs_run_delayed_items() btrfs_first_delayed_node() --> also picks delayed node X but through the node_list list __btrfs_commit_inode_delayed_items() --> runs all delayed items from this node and drops the node's item count to 0 through call to btrfs_release_delayed_inode() --> finishes running any remaining delayed nodes --> finishes transaction commit --> stops cleaner and transaction threads btrfs_free_fs_roots() --> frees all roots and removes them from the radix tree fs_info->fs_roots_radix btrfs_join_transaction() start_transaction() btrfs_record_root_in_trans() record_root_in_trans() radix_tree_tag_set() --> crashes because the root is not in the radix tree anymore If the worker is able to call btrfs_join_transaction() before the unmount task frees the fs roots, we end up leaking a transaction and all its resources, since after the call to btrfs_commit_super() and stopping the transaction kthread, we don't expect to have any transaction open anymore. When this situation happens the worker has a delayed node that has no more items to run, since the task calling btrfs_run_delayed_items(), which is doing a transaction commit, picks the same node and runs all its items first. We can not wait for the worker to complete when running delayed items through btrfs_run_delayed_items(), because we call that function in several phases of a transaction commit, and that could cause a deadlock because the worker calls btrfs_join_transaction() and the task doing the transaction commit may have already set the transaction state to TRANS_STATE_COMMIT_DOING. Also it's not possible to get into a situation where only some of the items of a delayed node are added to the fs/subvolume tree in the current transaction and the remaining ones in the next transaction, because when running the items of a delayed inode we lock its mutex, effectively waiting for the worker if the worker is running the items of the delayed node already. Since this can only cause issues when unmounting a filesystem, fix it in a simple way by waiting for any jobs on the delayed workers queue before calling btrfs_commit_supper() at close_ctree(). This works because at this point no one can call btrfs_btree_balance_dirty() or btrfs_balance_delayed_items(), and if we end up waiting for any worker to complete, btrfs_commit_super() will commit the transaction created by the worker. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: NFilipe Manana <fdmanana@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Naohiro Aota 提交于
This function finally factor out prepare_allocation() form find_free_extent(). This function is called before the allocation loop and a specific allocator function like prepare_allocation_clustered() should initialize their private information and can set proper hint_byte to indicate where to start the allocation with. Reviewed-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NNaohiro Aota <naohiro.aota@wdc.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Naohiro Aota 提交于
LOOP_NO_EMPTY_SIZE is solely dedicated for clustered allocation. So, we can skip this stage and give up the allocation. Signed-off-by: NNaohiro Aota <naohiro.aota@wdc.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Naohiro Aota 提交于
Factor out chunk_allocation_failed() from find_free_extent_update_loop(). This function is called when it failed to allocate a chunk. The function can modify "ffe_ctl->loop" and return 0 to continue with the next stage. Or, it can return -ENOSPC to give up here. Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: NNaohiro Aota <naohiro.aota@wdc.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Naohiro Aota 提交于
Now that, we don't use last_ptr and use_cluster in the function. Drop these arguments from it. Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NNaohiro Aota <naohiro.aota@wdc.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Naohiro Aota 提交于
Factor out found_extent() from find_free_extent_update_loop(). This function is called when a proper extent is found and before returning from find_free_extent(). Hook functions like found_extent_clustered() should save information for a next allocation. Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NNaohiro Aota <naohiro.aota@wdc.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Naohiro Aota 提交于
Factor out release_block_group() from find_free_extent(). This function is called when it gives up an allocation from a block group. Each allocation policy should reset its information for an allocation in the next block group. Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NNaohiro Aota <naohiro.aota@wdc.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Naohiro Aota 提交于
Now that, find_free_extent_clustered() and find_free_extent_unclustered() can access "last_ptr" from the "clustered" variable, we can drop it from the arguments. Reviewed-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NNaohiro Aota <naohiro.aota@wdc.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Naohiro Aota 提交于
Factor out do_allocation() from find_free_extent(). This function do an actual extent allocation in a given block group. The ffe_ctl->policy is used to determine the actual allocator function to use. Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: NNaohiro Aota <naohiro.aota@wdc.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Naohiro Aota 提交于
Move "last_ptr" and "use_cluster" into struct find_free_extent_ctl, so that hook functions for clustered allocator can use these variables. Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NNaohiro Aota <naohiro.aota@wdc.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Naohiro Aota 提交于
This commit moves hint_byte into find_free_extent_ctl, so that we can modify the hint_byte in the other functions. This will help us split find_free_extent further. This commit also renames the function argument "hint_byte" to "hint_byte_orig" to avoid misuse. Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NNaohiro Aota <naohiro.aota@wdc.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Naohiro Aota 提交于
This commit introduces extent allocation policy for btrfs. This policy controls how btrfs allocate an extents from block groups. There is no functional change introduced with this commit. Reviewed-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NNaohiro Aota <naohiro.aota@wdc.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Naohiro Aota 提交于
Currently, we ignore a device whose available space is less than "BTRFS_STRIPE_LEN * dev_stripes". This is a lower limit for current allocation policy (to maximize the number of stripes). This commit parameterizes dev_extent_min, so that other policies can set their own lower limitat to ignore a device with insufficient space. Reviewed-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NNaohiro Aota <naohiro.aota@wdc.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Naohiro Aota 提交于
Factor out create_chunk() from __btrfs_alloc_chunk(). This function finally creates a chunk. There is no functional changes. Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: NNaohiro Aota <naohiro.aota@wdc.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Naohiro Aota 提交于
Factor out decide_stripe_size() from __btrfs_alloc_chunk(). This function calculates the actual stripe size to allocate. decide_stripe_size() handles the common case to round down the 'ndevs' to 'devs_increment' and check the upper and lower limitation of 'ndevs'. decide_stripe_size_regular() decides the size of a stripe and the size of a chunk. The policy is to maximize the number of stripes. This commit has no functional changes. Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NNaohiro Aota <naohiro.aota@wdc.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Naohiro Aota 提交于
Factor out gather_device_info() from __btrfs_alloc_chunk(). This function iterates over devices list and gather information about devices. This commit also introduces "max_avail" and "dev_extent_min" to fold the same calculation to one variable. This commit has no functional changes. Reviewed-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NNaohiro Aota <naohiro.aota@wdc.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Naohiro Aota 提交于
Factor out init_alloc_chunk_ctl() from __btrfs_alloc_chunk(). This function initialises parameters of "struct alloc_chunk_ctl" for allocation. init_alloc_chunk_ctl() handles a common part of the initialisation to load the RAID parameters from btrfs_raid_array. init_alloc_chunk_ctl_policy_regular() decides some parameters for its allocation. The last "else" case in the original code is moved to __btrfs_alloc_chunk() to handle the error case in the common code. Replace the BUG_ON with ASSERT() and error return at the same time. Reviewed-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NNaohiro Aota <naohiro.aota@wdc.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Naohiro Aota 提交于
Introduce "struct alloc_chunk_ctl" to wrap needed parameters for the chunk allocation. This will be used to split __btrfs_alloc_chunk() into smaller functions. This commit folds a number of local variables in __btrfs_alloc_chunk() into one "struct alloc_chunk_ctl ctl". There is no functional change. Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NNaohiro Aota <naohiro.aota@wdc.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Naohiro Aota 提交于
Factor out two functions from find_free_dev_extent_start(). dev_extent_search_start() decides the starting position of the search. dev_extent_hole_check() checks if a hole found is suitable for device extent allocation. These functions also have the switch-cases to change the allocation behavior depending on the policy. Reviewed-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: NNaohiro Aota <naohiro.aota@wdc.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Naohiro Aota 提交于
Introduce chunk allocation policy for btrfs. This policy controls how chunks and device extents are allocated from devices. Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NNaohiro Aota <naohiro.aota@wdc.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Naohiro Aota 提交于
Do not BUG_ON() when an invalid profile is passed to __btrfs_alloc_chunk(). Instead return -EINVAL with ASSERT() to catch a bug in the development stage. Suggested-by: NJohannes Thumshirn <Johannes.Thumshirn@wdc.com> Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NNaohiro Aota <naohiro.aota@wdc.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Naohiro Aota 提交于
While the "full_search" variable defined in find_free_extent() is bool, but the full_search argument of find_free_extent_update_loop() is defined as int. Let's trivially fix the argument type. Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NNaohiro Aota <naohiro.aota@wdc.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Qu Wenruo 提交于
After the previous patch, qgroup_rescan_running is protected by btrfs_fs_info::qgroup_rescan_lock, thus no need for the extra spinlock. Suggested-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NQu Wenruo <wqu@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Qu Wenruo 提交于
[BUG] There are some reports about btrfs wait forever to unmount itself, with the following call trace: INFO: task umount:4631 blocked for more than 491 seconds. Tainted: G X 5.3.8-2-default #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. umount D 0 4631 3337 0x00000000 Call Trace: ([<00000000174adf7a>] __schedule+0x342/0x748) [<00000000174ae3ca>] schedule+0x4a/0xd8 [<00000000174b1f08>] schedule_timeout+0x218/0x420 [<00000000174af10c>] wait_for_common+0x104/0x1d8 [<000003ff804d6994>] btrfs_qgroup_wait_for_completion+0x84/0xb0 [btrfs] [<000003ff8044a616>] close_ctree+0x4e/0x380 [btrfs] [<0000000016fa3136>] generic_shutdown_super+0x8e/0x158 [<0000000016fa34d6>] kill_anon_super+0x26/0x40 [<000003ff8041ba88>] btrfs_kill_super+0x28/0xc8 [btrfs] [<0000000016fa39f8>] deactivate_locked_super+0x68/0x98 [<0000000016fcb198>] cleanup_mnt+0xc0/0x140 [<0000000016d6a846>] task_work_run+0xc6/0x110 [<0000000016d04f76>] do_notify_resume+0xae/0xb8 [<00000000174b30ae>] system_call+0xe2/0x2c8 [CAUSE] The problem happens when we have called qgroup_rescan_init(), but not queued the worker. It can be caused mostly by error handling. Qgroup ioctl thread | Unmount thread ----------------------------------------+----------------------------------- | btrfs_qgroup_rescan() | |- qgroup_rescan_init() | | |- qgroup_rescan_running = true; | | | |- trans = btrfs_join_transaction() | | Some error happened | | | |- btrfs_qgroup_rescan() returns error | But qgroup_rescan_running == true; | | close_ctree() | |- btrfs_qgroup_wait_for_completion() | |- running == true; | |- wait_for_completion(); btrfs_qgroup_rescan_worker is never queued, thus no one is going to wake up close_ctree() and we get a deadlock. All involved qgroup_rescan_init() callers are: - btrfs_qgroup_rescan() The example above. It's possible to trigger the deadlock when error happened. - btrfs_quota_enable() Not possible. Just after qgroup_rescan_init() we queue the work. - btrfs_read_qgroup_config() It's possible to trigger the deadlock. It only init the work, the work queueing happens in btrfs_qgroup_rescan_resume(). Thus if error happened in between, deadlock is possible. We shouldn't set fs_info->qgroup_rescan_running just in qgroup_rescan_init(), as at that stage we haven't yet queued qgroup rescan worker to run. [FIX] Set qgroup_rescan_running before queueing the work, so that we ensure the rescan work is queued when we wait for it. Fixes: 8d9eddad ("Btrfs: fix qgroup rescan worker initialization") Signed-off-by: NJeff Mahoney <jeffm@suse.com> [ Change subject and cause analyse, use a smaller fix ] Signed-off-by: NQu Wenruo <wqu@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Andy Shevchenko 提交于
uuid_le_gen() is no used anymore, remove it for good. Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Andy Shevchenko 提交于
There are new types and helpers that are supposed to be used in new code. As a preparation to get rid of legacy types and API functions do the conversion here. Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Andy Shevchenko 提交于
In some cases we would like to generate a GUID and export it. Though it would require either casting to internal kernel types or an intermediate buffer. Instead we may achieve this by supplying a pointer to raw buffer and make a complimentary API to existing one for UUIDs. Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Andy Shevchenko 提交于
Sometimes we may need to import UUID from or export to the raw buffer, which is provided outside of kernel and can't be declared as UUID type. With current API this operation will require an explicit casting to one of UUID types and length, that is always a constant derived as sizeof the certain UUID type. Provide a helpful set of inline helpers to minimize developer's effort in the cases when raw buffers are involved. Suggested-by: NDavid Sterba <dsterba@suse.cz> Acked-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Qu Wenruo 提交于
[BUG] There is a fuzzed image which could cause KASAN report at unmount time. BUG: KASAN: use-after-free in btrfs_queue_work+0x2c1/0x390 Read of size 8 at addr ffff888067cf6848 by task umount/1922 CPU: 0 PID: 1922 Comm: umount Tainted: G W 5.0.21 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: dump_stack+0x5b/0x8b print_address_description+0x70/0x280 kasan_report+0x13a/0x19b btrfs_queue_work+0x2c1/0x390 btrfs_wq_submit_bio+0x1cd/0x240 btree_submit_bio_hook+0x18c/0x2a0 submit_one_bio+0x1be/0x320 flush_write_bio.isra.41+0x2c/0x70 btree_write_cache_pages+0x3bb/0x7f0 do_writepages+0x5c/0x130 __writeback_single_inode+0xa3/0x9a0 writeback_single_inode+0x23d/0x390 write_inode_now+0x1b5/0x280 iput+0x2ef/0x600 close_ctree+0x341/0x750 generic_shutdown_super+0x126/0x370 kill_anon_super+0x31/0x50 btrfs_kill_super+0x36/0x2b0 deactivate_locked_super+0x80/0xc0 deactivate_super+0x13c/0x150 cleanup_mnt+0x9a/0x130 task_work_run+0x11a/0x1b0 exit_to_usermode_loop+0x107/0x130 do_syscall_64+0x1e5/0x280 entry_SYSCALL_64_after_hwframe+0x44/0xa9 [CAUSE] The fuzzed image has a completely screwd up extent tree: leaf 29421568 gen 8 total ptrs 6 free space 3587 owner EXTENT_TREE refs 2 lock (w:0 r:0 bw:0 br:0 sw:0 sr:0) lock_owner 0 current 5938 item 0 key (12587008 168 4096) itemoff 3942 itemsize 53 extent refs 1 gen 9 flags 1 ref#0: extent data backref root 5 objectid 259 offset 0 count 1 item 1 key (12591104 168 8192) itemoff 3889 itemsize 53 extent refs 1 gen 9 flags 1 ref#0: extent data backref root 5 objectid 271 offset 0 count 1 item 2 key (12599296 168 4096) itemoff 3836 itemsize 53 extent refs 1 gen 9 flags 1 ref#0: extent data backref root 5 objectid 259 offset 4096 count 1 item 3 key (29360128 169 0) itemoff 3803 itemsize 33 extent refs 1 gen 9 flags 2 ref#0: tree block backref root 5 item 4 key (29368320 169 1) itemoff 3770 itemsize 33 extent refs 1 gen 9 flags 2 ref#0: tree block backref root 5 item 5 key (29372416 169 0) itemoff 3737 itemsize 33 extent refs 1 gen 9 flags 2 ref#0: tree block backref root 5 Note that leaf 29421568 doesn't have its backref in the extent tree. Thus extent allocator can re-allocate leaf 29421568 for other trees. In short, the bug is caused by: - Existing tree block gets allocated to log tree This got its generation bumped. - Log tree balance cleaned dirty bit of offending tree block It will not be written back to disk, thus no WRITTEN flag. - Original owner of the tree block gets COWed Since the tree block has higher transid, no WRITTEN flag, it's reused, and not traced by transaction::dirty_pages. - Transaction aborted Tree blocks get cleaned according to transaction::dirty_pages. But the offending tree block is not recorded at all. - Filesystem unmount All pages are assumed to be are clean, destroying all workqueue, then call iput(btree_inode). But offending tree block is still dirty, which triggers writeback, and causes use-after-free bug. The detailed sequence looks like this: - Initial status eb: 29421568, header=WRITTEN bflags_dirty=0, page_dirty=0, gen=8, not traced by any dirty extent_iot_tree. - New tree block is allocated Since there is no backref for 29421568, it's re-allocated as new tree block. Keep in mind that tree block 29421568 is still referred by extent tree. - Tree block 29421568 is filled for log tree eb: 29421568, header=0 bflags_dirty=1, page_dirty=1, gen=9 << (gen bumped) traced by btrfs_root::dirty_log_pages - Some log tree operations Since the fs is using node size 4096, the log tree can easily go a level higher. - Log tree needs balance Tree block 29421568 gets all its content pushed to right, thus now it is empty, and we don't need it. btrfs_clean_tree_block() from __push_leaf_right() get called. eb: 29421568, header=0 bflags_dirty=0, page_dirty=0, gen=9 traced by btrfs_root::dirty_log_pages - Log tree write back btree_write_cache_pages() goes through dirty pages ranges, but since page of tree block 29421568 gets cleaned already, it's not written back to disk. Thus it doesn't have WRITTEN bit set. But ranges in dirty_log_pages are cleared. eb: 29421568, header=0 bflags_dirty=0, page_dirty=0, gen=9 not traced by any dirty extent_iot_tree. - Extent tree update when committing transaction Since tree block 29421568 has transid equal to running trans, and has no WRITTEN bit, should_cow_block() will use it directly without adding it to btrfs_transaction::dirty_pages. eb: 29421568, header=0 bflags_dirty=1, page_dirty=1, gen=9 not traced by any dirty extent_iot_tree. At this stage, we're doomed. We have a dirty eb not tracked by any extent io tree. - Transaction gets aborted due to corrupted extent tree Btrfs cleans up dirty pages according to transaction::dirty_pages and btrfs_root::dirty_log_pages. But since tree block 29421568 is not tracked by neither of them, it's still dirty. eb: 29421568, header=0 bflags_dirty=1, page_dirty=1, gen=9 not traced by any dirty extent_iot_tree. - Filesystem unmount Since all cleanup is assumed to be done, all workqueus are destroyed. Then iput(btree_inode) is called, expecting no dirty pages. But tree 29421568 is still dirty, thus triggering writeback. Since all workqueues are already freed, we cause use-after-free. This shows us that, log tree blocks + bad extent tree can cause wild dirty pages. [FIX] To fix the problem, don't submit any btree write bio if the filesytem has any error. This is the last safe net, just in case other cleanup haven't caught catch it. Link: https://github.com/bobfuzzer/CVE/tree/master/CVE-2019-19377 CC: stable@vger.kernel.org # 5.4+ Reviewed-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NQu Wenruo <wqu@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Marcos Paulo de Souza 提交于
There is no point to inform the user about size change if there's none. Update the message to conform to a commonly used format where the path and devid are printed and also print old and new sizes. Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: NMarcos Paulo de Souza <marcos@mpdesouza.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> [ enhance message ] Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Anand Jain 提交于
In btrfs_update_global_block_rsv the lines: num_bytes = block_rsv->size - block_rsv->reserved; block_rsv->reserved += num_bytes; imply: block_rsv->reserved = block_rsv->size; Assign block_rsv->size to block_rsv->reserved directly and reorder lines so they match the other branch. Signed-off-by: NAnand Jain <anand.jain@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
The tree_log_mutex and reloc_mutex locks are properly nested so we can simplify error handling and add labels for them. This reduces line count of the function. Reviewed-by: NAnand Jain <anand.jain@oracle.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
All we need to read is checksum size from fs_info superblock, and fs_info is provided by extent buffer so we can get rid of the wild pointer indirections from page/inode/root. Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
The message seems to be for debugging and has little value for users. Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: NAnand Jain <anand.jain@oracle.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We don't use the u_XX types anywhere, though they're defined. Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
Remove trivial comprator and open coded swap of two values. Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-