Netfilter assumes that skb->data == skb->nh.ipv6h
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Here is a simplified version of the patch to fix a bug in IPv6
multicasting. It:

1) adds existence check & EADDRINUSE error for regular joins
2) adds an exception for EADDRINUSE in the source-specific multicast
        join (where a prior join is ok)
3) adds a missing/needed read_lock on sock_mc_list; would've raced
        with destroying the socket on interface down without
4) adds a "leave group" in the (INCLUDE, empty) source filter case.
        This frees unneeded socket buffer memory, but also prevents
        an inappropriate interaction among the 8 socket options that
        mess with this. Some would fail as if in the group when you
        aren't really.

Item #4 had a locking bug in the last version of this patch; rather than
removing the idev->lock read lock only, I've simplified it to remove
all lock state in the path and treat it as a direct "leave group" call for
the (INCLUDE,empty) case it covers. Tested on an MP machine. :-)

Much thanks to HoerdtMickael <hoerdt@clarinet.u-strasbg.fr> who
reported the original bug.
Signed-off-by: NDavid L Stevens <dlstevens@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Essentially netlink at the moment always reports a pid and sequence of 0
always for v6 route activities. 
To understand the repurcassions of this look at:
http://lists.quagga.net/pipermail/quagga-dev/2005-June/003507.html

While fixing this, i took the liberty to resolve the outstanding issue
of IPV6 routes inserted via ioctls to have the correct pids as well.

This patch tries to behave as close as possible to the v4 routes i.e
maintains whatever PID the socket issuing the command owns as opposed to
the process. That made the patch a little bulky.

I have tested against both netlink derived utility to add/del routes as
well as ioctl derived one. The Quagga folks have tested against quagga.
This fixes the problem and so far hasnt been detected to introduce any
new issues.
Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca>
Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NRobert Olsson <Robert.Olsson@data.slu.se>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

net/ipv4/tcp_diag.c uses up to ->args[4]
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Without this change I can't set an attribute exactly PAGE_SIZE in
length. There is no need for zero termination because the interface
uses lengths.

From: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

I think we need this patch or we might "lose" devices to the dpm_irq_off
list if a failure occurs during the suspend process.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

o Following patch sets the attributes for newly allocated inodes for sysfs
  objects. If the object has non-default attributes, inode attributes are
  set as saved in sysfs_dirent->s_iattr, pointer to struct iattr.
Signed-off-by: NManeesh Soni <maneesh@in.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

o This adds ->i_op->setattr VFS method for sysfs inodes. The changed
  attribues are saved in the persistent sysfs_dirent structure as a pointer
  to struct iattr. The struct iattr is allocated only for those sysfs_dirent's
  for which default attributes are getting changed. Thanks to Jon Smirl for
  this suggestion.
Signed-off-by: NManeesh Soni <maneesh@in.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

o The following patch makes sure to attach sysfs_dirent to the dentry before
  allocation a new inode through sysfs_create(). This change is done as
  preparatory work for implementing ->i_op->setattr() functionality for
  sysfs objects.
Signed-off-by: NManeesh Soni <maneesh@in.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Finally (phew!) this patch demonstrates how to adapt the adm1026 to
take advantage of the new callbacks, and the i2c-sysfs.h defined
structure/macros. Most of the other sensor/hwmon drivers could be
updated in the same way. The odd few exceptions (bmcsensors for
example) however might be better off with their own custom attribute
structure.
Signed-off-by: NYani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch creates a new header with a potential standard i2c sensor
attribute type (which simply includes an int representing the sensor
number/index) and the associated macros, SENSOR_DEVICE_ATTR to define
a static attribute and to_sensor_dev_attr to get a
sensor_device_attribute reference from an embedded device_attribute
reference.
Signed-off-by: NYani Ioannou <yani.ioannou@gmail.com>

Signed-off-by: NYani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

[PATCH] Driver Core: drivers/usb/input/aiptek.c - drivers/zorro/zorro-sysfs.c: update device attribute callbacks
Signed-off-by: NYani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

[PATCH] Driver Core: drivers/s390/net/qeth_sys.c - drivers/usb/gadget/pxa2xx_udc.c: update device attribute callbacks
Signed-off-by: NYani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

[PATCH] Driver Core: drivers/char/raw3270.c - drivers/net/netiucv.c: update device attribute callbacks
Signed-off-by: NYani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

[PATCH] Driver Core: drivers/i2c/chips/w83781d.c - drivers/s390/block/dcssblk.c: update device attribute callbacks
Signed-off-by: NYani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NYani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NYani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NYani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NYani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NYani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NYani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds the device_attribute paramerter to the
device_attribute store and show sysfs callback functions, and passes a
reference to the attribute when the callbacks are called.
Signed-off-by: NYani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The error handling in bus_add_device() and device_attach() is simply
non-existing. This patch propagates any error from device_attach to
the upper layers to allow for a proper recovery.

From: Hannes Reinecke <hare@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Based on the discussion about spufs attributes, this is my suggestion
for a more generic attribute file support that can be used by both
debugfs and spufs.

Simple attribute files behave similarly to sequential files from
a kernel programmers perspective in that a standard set of file
operations is provided and only an open operation needs to
be written that registers file specific get() and set() functions.

These operations are defined as

void foo_set(void *data, u64 val); and
u64 foo_get(void *data);

where data is the inode->u.generic_ip pointer of the file and the
operations just need to make send of that pointer. The infrastructure
makes sure this works correctly with concurrent access and partial
read calls.

A macro named DEFINE_SIMPLE_ATTRIBUTE is provided to further simplify
using the attributes.

This patch already contains the changes for debugfs to use attributes
for its internal file operations.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This updates some driver data documentation:

 - removes references to some fields that haven't been there for a
   long time now, e.g. pre-kobject or even older;

 - giving more information about the probe() method;

 - adding an example of how platform_data is used
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This adds a generic function 'unregister_node()'.
It is used to remove objects of a node going away
for hotplug.  All the devices on the node must be
unregistered before calling this function.
Signed-off-by: NKeiichiro Tokunaga <tokunaga.keiich@jp.fujitsu.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

diff -puN drivers/base/node.c~numa_hp_base drivers/base/node.c

This patch fixes usb_driver_release_interface() to make it avoid calling
device_release_driver() recursively, i.e., when invoked from within the
disconnect routine for the same device.  The patch applies to your
"driver" tree.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch is intended for your "driver" tree.  It fixes several subtle
races in driver_detach() and device_release_driver() in the driver-model
core.

The major change is to use klist_remove() rather than klist_del() when
taking a device off its driver's list.  There's no other way to guarantee
that the list pointers will be updated before some other driver binds to
the device.  For this to work driver_detach() can't use a klist iterator,
so the loop over the devices must be written out in full.  In addition the
patch protects against the possibility that, when a driver and a device
are unregistered at the same time, one may be unloaded from memory before
the other is finished using it.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The original code looks like this:

        /* if interface was already added, bind now; else let
         * the future device_add() bind it, bypassing probe()
         */
        if (!list_empty (&dev->bus_list))
                device_bind_driver(dev);

IOW, it's checking to see if the device is attached to the bus or not
and binding the driver if it is. It's checking the device's bus list,
which will only appear empty when the device has been initialized, but
not added. It depends way too much on the driver model internals, but it
seems to be the only way to do the weird crap they want to do with
interfaces.

When I converted it to use klists, I accidentally inverted the logic,
which led to bad things happening. This patch returns the check to its
orginal value.

From: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Index: gregkh-2.6/drivers/usb/core/usb.c
===================================================================

Fix a typo in scdrv_init() which was breaking the build for SGI sn2.
Signed-off-by: NJason Uhlenkott <jasonuhl@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

There's no check to see if the device is already bound to a driver, which
could do bad things.  The first thing to go wrong is that it will try to match
a driver with a device already bound to one.  In some cases (it appears with
USB with drivers/usb/core/usb.c::usb_match_id()), some drivers will match a
device based on the class type, so it would be common (especially for HID
devices) to match a device that is already bound.

The fun comes when ->probe() is called, it fails, then
driver_probe_device() does this:

	dev->driver = NULL;

Later on, that pointer could be be dereferenced without checking and cause
hell to break loose.

This problem could be nasty. It's very hardware dependent, since some
devices could have a different set of matching qualifiers than others.

Now, I don't quite see exactly where/how you were getting that crash.
You're dereferencing bad memory, but I'm not sure which pointer was bad
and where it came from, but it could have come from a couple of different
places.

The patch below will hopefully fix it all up for you. It's against
2.6.12-rc2-mm1, and does the following:

- Move logic to driver_probe_device() and comments uncommon returns:
  1 - If device is bound
  0 - If device not bound, and no error
  error - If there was an error.

- Move locking to caller of that function, since we want to lock a
  device for the entire time we're trying to bind it to a driver (to
  prevent against a driver being loaded at the same time).

- Update __device_attach() and __driver_attach() to do that locking.

- Check if device is already bound in __driver_attach()

- Update the converse device_release_driver() so it locks the device
  around all of the operations.

- Mark driver_probe_device() as static and remove export. It's an
  internal function, it should stay that way, and there are no other
  callers. If there is ever a need to export it, we can audit it as
  necessary.
Signed-off-by: NAndrew Morton <akpm@osdl.org>