- 13 6月, 2013 37 次提交
-
-
git://git.open-mesh.org/linux-merge由 David S. Miller 提交于
Included change: - fix "rtnl locked" concurrent executions by using rtnl_lock instead of rtnl_trylock. This fix enables batman-adv initialisation to do not fail just because somewhere else in the system another code path is holding the rtnl lock. It is easy to see the problem when batman-adv is trying to start together with other networking components. - fix the routing protocol forwarding policy by enhancing the duplicate control packet detection. When the right circumstances trigger the issue, some nodes in the network become totally unreachable, so breaking the mesh connectivity. - fix the Bridge Loop Avoidance component by not running the originator address change handling routine when the component is disabled. The routine was generating useless packets that were sent over the network. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Beulich 提交于
When putting vif-s on the rx notify list, calling xenvif_put() must be deferred until after the removal from the list and the issuing of the notification, as both operations dereference the pointer. Changing this got me to notice that the "irq" variable was effectively unused (and was of too narrow type anyway). Signed-off-by: NJan Beulich <jbeulich@suse.com> Acked-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael S. Tsirkin 提交于
commit df8ef8f3 "macvlan: add FDB bridge ops and macvlan flags" added a way to control NOPROMISC macvlan flag through netlink. However, with a non passthrough device we never set promisc on open, even if NOPROMISC is off. As a result: If userspace clears NOPROMISC on open, then does not clear it on a netlink command, promisc counter is not decremented on stop and there will be no way to clear it once macvlan is detached. If userspace does not clear NOPROMISC on open, then sets NOPROMISC on a netlink command, promisc counter will be decremented from 0 and overflow to fffffffff with no way to clear promisc. To fix, simply ignore NOPROMISC flag in a netlink command for non-passthrough devices, same as we do at open/close. Since we touch this code anyway - check dev_set_promiscuity return code and pass it to users (though an error here is unlikely). Cc: "David S. Miller" <davem@davemloft.net> Reviewed-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking update from David Miller: 1) Fix dump iterator in nfnl_acct_dump() and ctnl_timeout_dump() to dump all objects properly, from Pablo Neira Ayuso. 2) xt_TCPMSS must use the default MSS of 536 when no MSS TCP option is present. Fix from Phil Oester. 3) qdisc_get_rtab() looks for an existing matching rate table and uses that instead of creating a new one. However, it's key matching is incomplete, it fails to check to make sure the ->data[] array is identical too. Fix from Eric Dumazet. 4) ip_vs_dest_entry isn't fully initialized before copying back to userspace, fix from Dan Carpenter. 5) Fix ubuf reference counting regression in vhost_net, from Jason Wang. 6) When sock_diag dumps a socket filter back to userspace, we have to translate it out of the kernel's internal representation first. From Nicolas Dichtel. 7) davinci_mdio holds a spinlock while calling pm_runtime, which sleeps. Fix from Sebastian Siewior. 8) Timeout check in sh_eth_check_reset is off by one, from Sergei Shtylyov. 9) If sctp socket init fails, we can NULL deref during cleanup. Fix from Daniel Borkmann. 10) netlink_mmap() does not propagate errors properly, from Patrick McHardy. 11) Disable powersave and use minstrel by default in ath9k. From Sujith Manoharan. 12) Fix a regression in that SOCK_ZEROCOPY is not set on tuntap sockets which prevents vhost from being able to use zerocopy. From Jason Wang. 13) Fix race between port lookup and TX path in team driver, from Jiri Pirko. 14) Missing length checks in bluetooth L2CAP packet parsing, from Johan Hedberg. 15) rtlwifi fails to connect to networking using any encryption method other than WPA2. Fix from Larry Finger. 16) Fix iwlegacy build due to incorrect CONFIG_* ifdeffing for power management stuff. From Yijing Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits) b43: stop format string leaking into error msgs ath9k: Use minstrel rate control by default Revert "ath9k_hw: Update rx gain initval to improve rx sensitivity" ath9k: Disable PowerSave by default net: wireless: iwlegacy: fix build error for il_pm_ops rtlwifi: Fix a false leak indication for PCI devices wl12xx/wl18xx: scan all 5ghz channels wl12xx: increase minimum singlerole firmware version required wl12xx: fix minimum required firmware version for wl127x multirole rtlwifi: rtl8192cu: Fix problem in connecting to WEP or WPA(1) networks mwifiex: debugfs: Fix out of bounds array access Bluetooth: Fix mgmt handling of power on failures Bluetooth: Fix missing length checks for L2CAP signalling PDUs Bluetooth: btmrvl: support Marvell Bluetooth device SD8897 Bluetooth: Fix checks for LE support on LE-only controllers team: fix checks in team_get_first_port_txable_rcu() team: move add to port list before port enablement team: check return value of team_get_port_by_index_rcu() for NULL tuntap: set SOCK_ZEROCOPY flag during open netlink: fix error propagation in netlink_mmap() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
Pull input layer bugfix from Jiri Kosina: "Memory leak regression fix from Benjamin Tissoires" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: multitouch: prevent memleak with the allocated name
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block layer fixes from Jens Axboe: "Outside of bcache (which really isn't super big), these are all few-liners. There are a few important fixes in here: - Fix blk pm sleeping when holding the queue lock - A small collection of bcache fixes that have been done and tested since bcache was included in this merge window. - A fix for a raid5 regression introduced with the bio changes. - Two important fixes for mtip32xx, fixing an oops and potential data corruption (or hang) due to wrong bio iteration on stacked devices." * 'for-linus' of git://git.kernel.dk/linux-block: scatterlist: sg_set_buf() argument must be in linear mapping raid5: Initialize bi_vcnt pktcdvd: silence static checker warning block: remove refs to XD disks from documentation blkpm: avoid sleep when holding queue lock mtip32xx: Correctly handle bio->bi_idx != 0 conditions mtip32xx: Fix NULL pointer dereference during module unload bcache: Fix error handling in init code bcache: clarify free/available/unused space bcache: drop "select CLOSURES" bcache: Fix incompatible pointer type warning
-
由 Linus Torvalds 提交于
Merge misc fixes from Andrew Morton: "Bunch of fixes and one little addition to math64.h" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (27 commits) include/linux/math64.h: add div64_ul() mm: memcontrol: fix lockless reclaim hierarchy iterator frontswap: fix incorrect zeroing and allocation size for frontswap_map kernel/audit_tree.c:audit_add_tree_rule(): protect `rule' from kill_rules() mm: migration: add migrate_entry_wait_huge() ocfs2: add missing lockres put in dlm_mig_lockres_handler mm/page_alloc.c: fix watermark check in __zone_watermark_ok() drivers/misc/sgi-gru/grufile.c: fix info leak in gru_get_config_info() aio: fix io_destroy() regression by using call_rcu() rtc-at91rm9200: use shadow IMR on at91sam9x5 rtc-at91rm9200: add shadow interrupt mask rtc-at91rm9200: refactor interrupt-register handling rtc-at91rm9200: add configuration support rtc-at91rm9200: add match-table compile guard fs/ocfs2/namei.c: remove unecessary ERROR when removing non-empty directory swap: avoid read_swap_cache_async() race to deadlock while waiting on discard I/O completion drivers/rtc/rtc-twl.c: fix missing device_init_wakeup() when booted with device tree cciss: fix broken mutex usage in ioctl audit: wait_for_auditd() should use TASK_UNINTERRUPTIBLE drivers/rtc/rtc-cmos.c: fix accidentally enabling rtc channel ...
-
由 Alex Shi 提交于
There is div64_long() to handle the s64/long division, but no mocro do u64/ul division. It is necessary in some scenarios, so add this function. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NAlex Shi <alex.shi@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
The lockless reclaim hierarchy iterator currently has a misplaced barrier that can lead to use-after-free crashes. The reclaim hierarchy iterator consist of a sequence count and a position pointer that are read and written locklessly, with memory barriers enforcing ordering. The write side sets the position pointer first, then updates the sequence count to "publish" the new position. Likewise, the read side must read the sequence count first, then the position. If the sequence count is up to date, it's guaranteed that the position is up to date as well: writer: reader: iter->position = position if iter->sequence == expected: smp_wmb() smp_rmb() iter->sequence = sequence position = iter->position However, the read side barrier is currently misplaced, which can lead to dereferencing stale position pointers that no longer point to valid memory. Fix this. Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Reported-by: NTejun Heo <tj@kernel.org> Reviewed-by: NTejun Heo <tj@kernel.org> Acked-by: NMichal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Glauber Costa <glommer@parallels.com> Cc: <stable@kernel.org> [3.10+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Akinobu Mita 提交于
The bitmap accessed by bitops must have enough size to hold the required numbers of bits rounded up to a multiple of BITS_PER_LONG. And the bitmap must not be zeroed by memset() if the number of bits cleared is not a multiple of BITS_PER_LONG. This fixes incorrect zeroing and allocation size for frontswap_map. The incorrect zeroing part doesn't cause any problem because frontswap_map is freed just after zeroing. But the wrongly calculated allocation size may cause the problem. For 32bit systems, the allocation size of frontswap_map is about twice as large as required size. For 64bit systems, the allocation size is smaller than requeired if the number of bits is not a multiple of BITS_PER_LONG. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chen Gang 提交于
audit_add_tree_rule() must set 'rule->tree = NULL;' firstly, to protect the rule itself freed in kill_rules(). The reason is when it is killed, the 'rule' itself may have already released, we should not access it. one example: we add a rule to an inode, just at the same time the other task is deleting this inode. The work flow for adding a rule: audit_receive() -> (need audit_cmd_mutex lock) audit_receive_skb() -> audit_receive_msg() -> audit_receive_filter() -> audit_add_rule() -> audit_add_tree_rule() -> (need audit_filter_mutex lock) ... unlock audit_filter_mutex get_tree() ... iterate_mounts() -> (iterate all related inodes) tag_mount() -> tag_trunk() -> create_trunk() -> (assume it is 1st rule) fsnotify_add_mark() -> fsnotify_add_inode_mark() -> (add mark to inode->i_fsnotify_marks) ... get_tree(); (each inode will get one) ... lock audit_filter_mutex The work flow for deleting an inode: __destroy_inode() -> fsnotify_inode_delete() -> __fsnotify_inode_delete() -> fsnotify_clear_marks_by_inode() -> (get mark from inode->i_fsnotify_marks) fsnotify_destroy_mark() -> fsnotify_destroy_mark_locked() -> audit_tree_freeing_mark() -> evict_chunk() -> ... tree->goner = 1 ... kill_rules() -> (assume current->audit_context == NULL) call_rcu() -> (rule->tree != NULL) audit_free_rule_rcu() -> audit_free_rule() ... audit_schedule_prune() -> (assume current->audit_context == NULL) kthread_run() -> (need audit_cmd_mutex and audit_filter_mutex lock) prune_one() -> (delete it from prue_list) put_tree(); (match the original get_tree above) Signed-off-by: NChen Gang <gang.chen@asianux.com> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Naoya Horiguchi 提交于
When we have a page fault for the address which is backed by a hugepage under migration, the kernel can't wait correctly and do busy looping on hugepage fault until the migration finishes. As a result, users who try to kick hugepage migration (via soft offlining, for example) occasionally experience long delay or soft lockup. This is because pte_offset_map_lock() can't get a correct migration entry or a correct page table lock for hugepage. This patch introduces migration_entry_wait_huge() to solve this. Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: NRik van Riel <riel@redhat.com> Reviewed-by: NWanpeng Li <liwanp@linux.vnet.ibm.com> Reviewed-by: NMichal Hocko <mhocko@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Andi Kleen <andi@firstfloor.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: <stable@vger.kernel.org> [2.6.35+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Xue jiufei 提交于
dlm_mig_lockres_handler() is missing a dlm_lockres_put() on an error path. Signed-off-by: Njoyce <xuejiufei@huawei.com> Reviewed-by: Nshencanquan <shencanquan@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tomasz Stanislawski 提交于
The watermark check consists of two sub-checks. The first one is: if (free_pages <= min + lowmem_reserve) return false; The check assures that there is minimal amount of RAM in the zone. If CMA is used then the free_pages is reduced by the number of free pages in CMA prior to the over-mentioned check. if (!(alloc_flags & ALLOC_CMA)) free_pages -= zone_page_state(z, NR_FREE_CMA_PAGES); This prevents the zone from being drained from pages available for non-movable allocations. The second check prevents the zone from getting too fragmented. for (o = 0; o < order; o++) { free_pages -= z->free_area[o].nr_free << o; min >>= 1; if (free_pages <= min) return false; } The field z->free_area[o].nr_free is equal to the number of free pages including free CMA pages. Therefore the CMA pages are subtracted twice. This may cause a false positive fail of __zone_watermark_ok() if the CMA area gets strongly fragmented. In such a case there are many 0-order free pages located in CMA. Those pages are subtracted twice therefore they will quickly drain free_pages during the check against fragmentation. The test fails even though there are many free non-cma pages in the zone. This patch fixes this issue by subtracting CMA pages only for a purpose of (free_pages <= min + lowmem_reserve) check. Laura said: We were observing allocation failures of higher order pages (order 5 = 128K typically) under tight memory conditions resulting in driver failure. The output from the page allocation failure showed plenty of free pages of the appropriate order/type/zone and mostly CMA pages in the lower orders. For full disclosure, we still observed some page allocation failures even after applying the patch but the number was drastically reduced and those failures were attributed to fragmentation/other system issues. Signed-off-by: NTomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Tested-by: NLaura Abbott <lauraa@codeaurora.org> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: NMinchan Kim <minchan@kernel.org> Cc: Mel Gorman <mel@csn.ul.ie> Tested-by: NMarek Szyprowski <m.szyprowski@samsung.com> Cc: <stable@vger.kernel.org> [3.7+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dan Carpenter 提交于
The "info.fill" array isn't initialized so it can leak uninitialized stack information to user space. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NRobin Holt <holt@sgi.com> Acked-by: NDimitri Sivanich <sivanich@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kent Overstreet 提交于
There was a regression introduced by 36f55889 ("aio: refcounting cleanup"), reported by Jens Axboe - the refcounting cleanup switched to using RCU in the shutdown path, but the synchronize_rcu() was done in the context of the io_destroy() syscall greatly increasing the time it could block. This patch switches it to call_rcu() and makes shutdown asynchronous (more asynchronous than it was originally; before the refcount changes io_destroy() would still wait on pending kiocbs). Note that there's a global quota on the max outstanding kiocbs, and that quota must be manipulated synchronously; otherwise io_setup() could return -EAGAIN when there isn't quota available, and userspace won't have any way of waiting until shutdown of the old kioctxs has finished (besides busy looping). So we release our quota before kioctx shutdown has finished, which should be fine since the quota never corresponded to anything real anyways. Signed-off-by: NKent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Reported-by: NJens Axboe <axboe@kernel.dk> Tested-by: NJens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org> Tested-by: NBenjamin LaHaise <bcrl@kvack.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johan Hovold 提交于
Add support for the at91sam9x5-family which must use the shadow interrupt mask due to a hardware issue (causing RTC_IMR to always be zero). Signed-off-by: NJohan Hovold <jhovold@gmail.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: Robert Nelson <Robert.Nelson@digikey.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johan Hovold 提交于
Add shadow interrupt-mask register which can be used on SoCs where the actual hardware register is broken. Note that some care needs to be taken to make sure the shadow mask corresponds to the actual hardware state. The added overhead is not an issue for the non-broken SoCs due to the relatively infrequent interrupt-mask updates. We do, however, only use the shadow mask value as a fall-back when it actually needed as there is still a theoretical possibility that the mask is incorrect (see the code for details). Signed-off-by: NJohan Hovold <jhovold@gmail.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: Robert Nelson <Robert.Nelson@digikey.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johan Hovold 提交于
Add accessors for the interrupt register. This will allow us to easily add a shadow interrupt-mask register to use on SoCs where the interrupt-mask register cannot be used. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: Robert Nelson <Robert.Nelson@digikey.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johan Hovold 提交于
Add configuration support which can be used to implement SoC-specific workarounds for broken hardware. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: Robert Nelson <Robert.Nelson@digikey.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johan Hovold 提交于
The members of Atmel's at91sam9x5 family (9x5) have a broken RTC interrupt mask register (AT91_RTC_IMR). It does not reflect enabled interrupts but instead always returns zero. The kernel's rtc-at91rm9200 driver handles the RTC for the 9x5 family. Currently when the date/time is set, an interrupt is generated and this driver neglects to handle the interrupt. The kernel complains about the un-handled interrupt and disables it henceforth. This not only breaks the RTC function, but since that interrupt is shared (Atmel's SYS interrupt) then other things break as well (e.g. the debug port no longer accepts characters). Tested on the at91sam9g25. Bug confirmed by Atmel. This patch (of 5): Add missing match-table compile guard. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: Robert Nelson <Robert.Nelson@digikey.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Goldwyn Rodrigues 提交于
While removing a non-empty directory, the kernel dumps a message: (rmdir,21743,1):ocfs2_unlink:953 ERROR: status = -39 Suppress the error message from being printed in the dmesg so users don't panic. Signed-off-by: NGoldwyn Rodrigues <rgoldwyn@suse.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Acked-by: NSunil Mushran <sunil.mushran@gmail.com> Reviewed-by: NJie Liu <jeff.liu@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rafael Aquini 提交于
read_swap_cache_async() can race against get_swap_page(), and stumble across a SWAP_HAS_CACHE entry in the swap map whose page wasn't brought into the swapcache yet. This transient swap_map state is expected to be transitory, but the actual placement of discard at scan_swap_map() inserts a wait for I/O completion thus making the thread at read_swap_cache_async() to loop around its -EEXIST case, while the other end at get_swap_page() is scheduled away at scan_swap_map(). This can leave the system deadlocked if the I/O completion happens to be waiting on the CPU waitqueue where read_swap_cache_async() is busy looping and !CONFIG_PREEMPT. This patch introduces a cond_resched() call to make the aforementioned read_swap_cache_async() busy loop condition to bail out when necessary, thus avoiding the subtle race window. Signed-off-by: NRafael Aquini <aquini@redhat.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: NHugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tony Lindgren 提交于
When booted in legacy mode device_init_wakeup() gets called by drivers/mfd/twl-core.c when the children are initialized. However, when booted using device tree, the children are created with of_platform_populate() instead add_children(). This means that the RTC driver will not have device_init_wakeup() set, and we need to call it from the driver probe like RTC drivers typically do. Without this we cannot test PM wake-up events on omaps for cases where there may not be any physical wake-up event. Signed-off-by: NTony Lindgren <tony@atomide.com> Reported-by: NKevin Hilman <khilman@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Jingoo Han <jg1.han@samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stephen M. Cameron 提交于
If a new logical drive is added and the CCISS_REGNEWD ioctl is invoked (as is normal with the Array Configuration Utility) the process will hang as below. It attempts to acquire the same mutex twice, once in do_ioctl() and once in cciss_unlocked_open(). The BKL was recursive, the mutex isn't. Linux version 3.10.0-rc2 (scameron@localhost.localdomain) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Fri May 24 14:32:12 CDT 2013 [...] acu D 0000000000000001 0 3246 3191 0x00000080 Call Trace: schedule+0x29/0x70 schedule_preempt_disabled+0xe/0x10 __mutex_lock_slowpath+0x17b/0x220 mutex_lock+0x2b/0x50 cciss_unlocked_open+0x2f/0x110 [cciss] __blkdev_get+0xd3/0x470 blkdev_get+0x5c/0x1e0 register_disk+0x182/0x1a0 add_disk+0x17c/0x310 cciss_add_disk+0x13a/0x170 [cciss] cciss_update_drive_info+0x39b/0x480 [cciss] rebuild_lun_table+0x258/0x370 [cciss] cciss_ioctl+0x34f/0x470 [cciss] do_ioctl+0x49/0x70 [cciss] __blkdev_driver_ioctl+0x28/0x30 blkdev_ioctl+0x200/0x7b0 block_ioctl+0x3c/0x40 do_vfs_ioctl+0x89/0x350 SyS_ioctl+0xa1/0xb0 system_call_fastpath+0x16/0x1b This mutex usage was added into the ioctl path when the big kernel lock was removed. As it turns out, these paths are all thread safe anyway (or can easily be made so) and we don't want ioctl() to be single threaded in any case. Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Mike Miller <mike.miller@hp.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
audit_log_start() does wait_for_auditd() in a loop until audit_backlog_wait_time passes or audit_skb_queue has a room. If signal_pending() is true this becomes a busy-wait loop, schedule() in TASK_INTERRUPTIBLE won't block. Thanks to Guy for fully investigating and explaining the problem. (akpm: that'll cause the system to lock up on a non-preemptible uniprocessor kernel) (Guy: "Our customer was in fact running a uniprocessor machine, and they reported a system hang.") Signed-off-by: NOleg Nesterov <oleg@redhat.com> Reported-by: NGuy Streeter <streeter@redhat.com> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Derek Basehore 提交于
During resume, we call hpet_rtc_timer_init after masking an irq bit in hpet. This will cause the call to hpet_disable_rtc_channel to be undone if RTC_AIE is the only bit not masked. Allowing the cmos interrupt handler to run before resuming caused some issues where the timer for the alarm was not removed. This would cause other, later timers to not be cleared, so utilities such as hwclock would time out when waiting for the update interrupt. [akpm@linux-foundation.org: coding-style tweak] Signed-off-by: NDerek Basehore <dbasehore@chromium.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dmitry Osipenko 提交于
Use device_init_wakeup() instead of device_set_wakeup_capable() and move it before rtc dev registering. This fixes alarmtimer not registered when tps6586x rtc is the only wakeup compatible rtc in the system. Signed-off-by: NDmitry Osipenko <digetx@gmail.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrey Vagin 提交于
struct memcg_cache_params has a union. Different parts of this union are used for root and non-root caches. A part with destroying work is used only for non-root caches. BUG: unable to handle kernel paging request at 0000000fffffffe0 IP: kmem_cache_alloc+0x41/0x1f0 Modules linked in: netlink_diag af_packet_diag udp_diag tcp_diag inet_diag unix_diag ip6table_filter ip6_tables i2c_piix4 virtio_net virtio_balloon microcode i2c_core pcspkr floppy CPU: 0 PID: 1929 Comm: lt-vzctl Tainted: G D 3.10.0-rc1+ #2 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 RIP: kmem_cache_alloc+0x41/0x1f0 Call Trace: getname_flags.part.34+0x30/0x140 getname+0x38/0x60 do_sys_open+0xc5/0x1e0 SyS_open+0x22/0x30 system_call_fastpath+0x16/0x1b Code: f4 53 48 83 ec 18 8b 05 8e 53 b7 00 4c 8b 4d 08 21 f0 a8 10 74 0d 4c 89 4d c0 e8 1b 76 4a 00 4c 8b 4d c0 e9 92 00 00 00 4d 89 f5 <4d> 8b 45 00 65 4c 03 04 25 48 cd 00 00 49 8b 50 08 4d 8b 38 49 RIP [<ffffffff8116b641>] kmem_cache_alloc+0x41/0x1f0 Signed-off-by: NAndrey Vagin <avagin@openvz.org> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Glauber Costa <glommer@parallels.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: NMichal Hocko <mhocko@suse.cz> Cc: Li Zefan <lizefan@huawei.com> Cc: <stable@vger.kernel.org> [3.9.x] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Xiaowei.Hu 提交于
If an error occurs, for example an EIO in __ocfs2_prepare_orphan_dir, ocfs2_prep_new_orphaned_file will release the inode_ac, then when the caller of ocfs2_prep_new_orphaned_file gets a 0 return, it will refer to a NULL ocfs2_alloc_context struct in the following functions. A kernel panic happens. Signed-off-by: N"Xiaowei.Hu" <xiaowei.hu@oracle.com> Reviewed-by: Nshencanquan <shencanquan@huawei.com> Acked-by: NSunil Mushran <sunil.mushran@gmail.com> Cc: Joe Jin <joe.jin@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chen Gang 提交于
For 'while' looping, need stop when 'nbytes == 0', or will cause issue. ('nbytes' is size_t which is always bigger or equal than zero). The related warning: (with EXTRA_CFLAGS=-W) lib/mpi/mpicoder.c:40:2: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] Signed-off-by: NChen Gang <gang.chen@asianux.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: David Howells <dhowells@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kees Cook 提交于
The dmesg_restrict sysctl currently covers the syslog method for access dmesg, however /dev/kmsg isn't covered by the same protections. Most people haven't noticed because util-linux dmesg(1) defaults to using the syslog method for access in older versions. With util-linux dmesg(1) defaults to reading directly from /dev/kmsg. To fix /dev/kmsg, let's compare the existing interfaces and what they allow: - /proc/kmsg allows: - open (SYSLOG_ACTION_OPEN) if CAP_SYSLOG since it uses a destructive single-reader interface (SYSLOG_ACTION_READ). - everything, after an open. - syslog syscall allows: - anything, if CAP_SYSLOG. - SYSLOG_ACTION_READ_ALL and SYSLOG_ACTION_SIZE_BUFFER, if dmesg_restrict==0. - nothing else (EPERM). The use-cases were: - dmesg(1) needs to do non-destructive SYSLOG_ACTION_READ_ALLs. - sysklog(1) needs to open /proc/kmsg, drop privs, and still issue the destructive SYSLOG_ACTION_READs. AIUI, dmesg(1) is moving to /dev/kmsg, and systemd-journald doesn't clear the ring buffer. Based on the comments in devkmsg_llseek, it sounds like actions besides reading aren't going to be supported by /dev/kmsg (i.e. SYSLOG_ACTION_CLEAR), so we have a strict subset of the non-destructive syslog syscall actions. To this end, move the check as Josh had done, but also rename the constants to reflect their new uses (SYSLOG_FROM_CALL becomes SYSLOG_FROM_READER, and SYSLOG_FROM_FILE becomes SYSLOG_FROM_PROC). SYSLOG_FROM_READER allows non-destructive actions, and SYSLOG_FROM_PROC allows destructive actions after a capabilities-constrained SYSLOG_ACTION_OPEN check. - /dev/kmsg allows: - open if CAP_SYSLOG or dmesg_restrict==0 - reading/polling, after open Addresses https://bugzilla.redhat.com/show_bug.cgi?id=903192 [akpm@linux-foundation.org: use pr_warn_once()] Signed-off-by: NKees Cook <keescook@chromium.org> Reported-by: NChristian Kujau <lists@nerdbynature.de> Tested-by: NJosh Boyer <jwboyer@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Robin Holt 提交于
We recently noticed that reboot of a 1024 cpu machine takes approx 16 minutes of just stopping the cpus. The slowdown was tracked to commit f96972f2 ("kernel/sys.c: call disable_nonboot_cpus() in kernel_restart()"). The current implementation does all the work of hot removing the cpus before halting the system. We are switching to just migrating to the boot cpu and then continuing with shutdown/reboot. This also has the effect of not breaking x86's command line parameter for specifying the reboot cpu. Note, this code was shamelessly copied from arch/x86/kernel/reboot.c with bits removed pertaining to the reboot_cpu command line parameter. Signed-off-by: NRobin Holt <holt@sgi.com> Tested-by: NShawn Guo <shawn.guo@linaro.org> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Srivatsa S. Bhat 提交于
There are instances in the kernel where we would like to disable CPU hotplug (from sysfs) during some important operation. Today the freezer code depends on this and the code to do it was kinda tailor-made for that. Restructure the code and make it generic enough to be useful for other usecases too. Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: NRobin Holt <holt@sgi.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David S. Miller 提交于
John W. Linville says: ==================== For now I have dropped the mac80211 tree from this request. We are developing a little backlog of fixes and I would like to avoid introducing any more uncertainty to this pull request for the 3.10 stream. All the other bits are the same as what was in the 2013-06-06 request, including the ath9k fixes intended to address the problems observed by Linus w/ his Pixel, and a CVE fix for a potential security issue in the b43 driver. Regarding the wl12xx bits, Luca says: "Here are three patches that I'd like to get into 3.10. Two of them, by me, are related to the firmware version checks in our driver. Without them, the firmwares fail to load. The other one, by Eliad, fixes a typo bug in our 5GHz scanning code." And as for the Bluetooth bits, Gustavo says: "The following patches are important bug fixes for 3.10, plus the support for a new device. We do have three fixes from Johan. The first one is a fix to avoid LE-only devices to rely on the (inexistent) extended features data. The second patch fixes length checks on incoming L2CAP signalling PDUs so we can discard PDU whose size doesn't match the one reported in the header. The last one fixes the handling of power on failures, we now report proper errors to mgmt when hci_dev_open()." Along with that... Larry Finger corrects an rtlwifi problem that caused some devices to refuse to connect to non-WPA2 networks if the device had previously assocated with a WPA2 network. He also adds a one-line fix to prevent false reports from kmemleak. Mark A. Greer fixes an out of bounds array access in mwifiex. Felix Fietkau reverts an earlier ath9k initval patch that reduced rx sensitivity in a number of ath9k devices with no corresponding benefit. Kees Cook fixes a potential uid-0 to ring-0 escalation in b43 (CVE-2013-2852). Sujith Manoharan turns-off powersave mode by default for ath9k, and also defaults ath9k to use the minstrel_ht rate control algorithm. Both of these are believed to contribute to greater stability/usability of ath9k in real-world situations. Yijing Wang fixes an iwlegacy build error for il_pm_ops if CONFIG_PM is set but CONFIG_PM_SLEEP is not set. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS fixes from Ralf Baechle: "Resurrect Alchemy platforms by invoking the WAIT instructions with interrupts enabled. This still leaves the race condition between testing TIF_NEED_RESCHED and the WAIT instruction for Alchemy platforms which need a different fix than other MIPS platforms. But at least it gets MIPS platforms flying again. There are also fixes for two build errors (CONFIG_FTRACE=y with CONFIG_DYNAMIC_FTRACE=n) and CONFIG_VIRTUALIZATION without CONFIG_KVM" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: ftrace: Add missing CONFIG_DYNAMIC_FTRACE MIPS: include: mmu_context.h: Replace VIRTUALIZATION with KVM MIPS: Alchemy: fix wait function
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Just some GMA500 memory leaks and i915 regression fix due to a regression fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: prefer VBT modes for SVDO-LVDS over EDID drm/i915: Enable hotplug interrupts after querying hw capabilities. drm/i915: Fix hotplug interrupt enabling for SDVOC drm/gma500/cdv: Fix cursor gem obj referencing on cdv drm/gma500/psb: Fix cursor gem obj referencing on psb drm/gma500/cdv: Unpin framebuffer on crtc disable drm/gma500/psb: Unpin framebuffer on crtc disable drm/gma500: Add fb gtt offset to fb base
-
- 12 6月, 2013 3 次提交
-
-
由 Linus Torvalds 提交于
Merge tag 'trace-fixes-v3.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Yoshihiro Yunomae fixed a regression in the output format when using one of the counter clocks. The new multibuffer code changed the trace_clock file to update the trace instances tr->clock_id but the actual traces still used the value from the obsolete global variable trace_clock_id" * tag 'trace-fixes-v3.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix outputting formats of x86-tsc and counter when use trace_clock
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client由 Linus Torvalds 提交于
Pull ceph fixes from Sage Weil: "There is a pair of fixes for double-frees in the recent bundle for 3.10, a couple of fixes for long-standing bugs (sleep while atomic and an endianness fix), and a locking fix that can be triggered when osds are going down" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: fix cleanup in rbd_add() rbd: don't destroy ceph_opts in rbd_add() ceph: ceph_pagelist_append might sleep while atomic ceph: add cpu_to_le32() calls when encoding a reconnect capability libceph: must hold mutex for reset_changed_osds()
-
由 John W. Linville 提交于
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-