- 27 9月, 2006 40 次提交
-
-
由 Paul Mundt 提交于
nommu needs to be able to shift PAGE_OFFSET, so we switch it to a non-user-visible CONFIG_PAGE_OFFSET and use that in the few places where it matters. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Other boards require this as well, so move it out of the rts7751r2d directory. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Takashi YOSHII 提交于
This implements initial math-emu support, aimed primarily at SH-3. Signed-off-by: NTakashi YOSHII <takasi-y@ops.dti.ne.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This replaces the old SH RTC driver, and allows us to clean quite a lot of things up on the board-specific side. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
We have a clash with RTC_CLASS over these names, so we change them.. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Drop TIF_USERSPACE and add addr_limit to the thread_info struct. Subsequently, use that for address checking in strnlen_user() to ward off bogus -EFAULTs. Make __strnlen_user() return 0 on exception, rather than -EFAULT. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Nothing exciting here, just trivial fixes.. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
If a channel is not TEI capable, don't try to request_irq().. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This fixes a long-standing FIXME for G2 DMA, where we finally wire up the IRQ handler and allow for sampling remaining bytes while in-flight. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This adds the VoyagerGX UART to the RTS7751R2D setup code, and cleans up a few build issues. Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Inhibit mapping through page tables in __ioremap() for PCI memory apertures on SH7751 and SH7780-style PCI controllers, translation is not possible for these areas. For other users that map a small window in P1/P2 space, ioremap() traps that already, and should never make it to __ioremap(). Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This cleans up quite a lot of the PCI mess that we currently have, and attempts to consolidate the duplication in the SH7780 and SH7751 PCI controllers. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
sh-sci was turning in to an unmaintainable mess, especially with regards to the port list. This cleans it up quite a bit, and switches over to a platform device model where subtypes will register their port list individually in their setup code. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Some kgdb cleanup. Move hexchars/highhex/lowhex to the header, so it can be reused by sh-sci. Also drop silly ctrl_inl/outl() overloading being done by the kgdb stub. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
We had our own version, which serves no purpose. Simply hook SH in to the generic one. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Andriy Skulysh 提交于
This adds some simple PM stubs and the basic APM interfaces, primarily for use by hp6xx, where the existing userland expects it. Signed-off-by: NAndriy Skulysh <askulysh@gmail.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Drop _PAGE_SHARED/_PAGE_U0_SHARED and document Linux PTE encodings in the PTEL value. Preserve the swap cache entry encoding semantics for now, though it will need rework to free up _PAGE_WT from _PAGE_FILE. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This fell behind a bit, get it updated so the documentation has something in common with reality. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
SE73180 can use the generic support, we just need to wire up the IRQ demuxing. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Andriy Skulysh 提交于
Trivial build fix. Signed-off-by: NAndriy Skulysh <askulysh@gmail.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Some of the paths were a bit broken, fix it up. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Make __xchg() a macro, so that gcc 4.0 doesn't blow up thanks to always_inline.. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
No longer needed.. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
With the store queue API rework, we need to change the in-kernel users too. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Initial register bank cleanup. Make SR.RB configurable, and add some preliminary documentation on register bank usage within the kernel. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This adds support for the Renesas SH7780 development boards, R7780RP and R7780MP. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Rewrite the store queue API for a per-cpu interface in the driver model. The old miscdevice is dropped, due to TASK_SIZE limitations, and no one was using it anyways. Carve up and allocate store queue space with a bitmap, back sq mapping objects with a slab cache, and let userspace worry about its own prefetching. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This updates the various boards for some of the recent I/O routine updates. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
There was a bug that got introduced when the split ptlock changes went in where mm could be unintialized for user mappings, this fixes it up.. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
We need this set to something sensible anywhere were we have an aliasing dcache.. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
ioremap() overhaul. Add support for transparent PMB mapping, get rid of p3_ioremap(), etc. Also drop ioremap() and iounmap() routines from the machvec, as everyone can use the generic ioremap() API instead. For PCI memory apertures and other special cases, use the pci_iomap() API, as boards are already required to get the mapping right there. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Cleanup of page table allocators, using generic folded PMD and PUD helpers. TLB flushing operations are moved to a more sensible spot. The page fault handler is also optimized slightly, we no longer waste cycles on IRQ disabling for flushing of the page from the ITLB, since we're already under CLI protection by the initial exception handler. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Some modules seem to need this, so we export it.. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Add support for 32-bit physical addressing through the SH-4A Privileged Space Mapping Buffer (PMB). Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Jamie Lenehan 提交于
Add support for the titan board. Signed-off-by: NJamie Lenehan <lenehan@twibble.org> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
A synco is needed before we jump to start_kernel(). While we're at it, also move the sh_cpu_init() jump until after we've zeroed BSS, as this has caused some undesirable results in sh_cpu_init(). Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Currently when making changes to control registers, we typically need some time for changes to take effect (8 nops, generally). However, for sh4a we simply need to do an icbi.. This is a simple patch for implementing a general purpose ctrl_barrier() which functions as a control register write barrier. There's some additional documentation in the patch itself, but it's pretty self explanatory. There were also some places where we were not doing the barrier, which didn't seem to have any adverse effects on legacy parts, but certainly did on sh4a. It's safer to have the barrier in place for legacy parts as well in these cases, though this does make flush_tlb_all() more expensive (by an order of 8 nops). We can ifdef around the flush_tlb_all() case for now if it's clear that all legacy parts won't have a problem with this. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Add CPU_HAS_PTEA, refactor some of the cpu flag settings. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 kogiidena 提交于
This adds support for the I-O DATA Landisk. Signed-off-by: Nkogiidena <kogiidena@eggplant.ddo.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Drop virt_to_bus() from sg_dma_address() so libata builds. While we're at it, move sg_dma_address() and sg_dma_len() from pci.h to scatterlist.h. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-