- 08 12月, 2006 2 次提交
-
-
由 Matthew Wilcox 提交于
Firmware ignores Cardbus bridges, so when Linux assigns bus numbers, it must override firmware's notion of what the busses are numbered. This is not sufficient to support the Cardbus bridge as there is also no interrupt routing table entry for them. Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Matthew Wilcox 提交于
0/NULL, missing __user, missing __iomem, non-ANSI prototype. Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
- 04 10月, 2006 4 次提交
-
-
由 Kyle McMartin 提交于
header. This will allow the use of more constants in the agpgart driver. Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Kyle McMartin 提交于
Pull out struct sba_device and struct lba_device into a common ropes.h header. Also fold the parisc portion of iosapic.h into this file. (Then delete the useless portion of iosapic.h) Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Kyle McMartin 提交于
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Kyle McMartin 提交于
(it's pretty useless telling a user they have a whole bunch of TR%d.%d LBAs) Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
- 31 3月, 2006 1 次提交
-
-
由 Helge Deller 提交于
Addresses in F-space must be accessed uncached on most parisc machines. Signed-off-by: NHelge Deller <deller@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
- 23 1月, 2006 1 次提交
-
-
由 Helge Deller 提交于
Helge, o Convert a bunch of kmalloc/memset uses to kzalloc. o pci.c: Add some __read_mostly annotations. o pci.c: Move constant pci_post_reset_delay to asm/pci.h o grfioctl.h: Add A4450A to comment of CRT_ID_VISUALIZE_EG. o Add some consts to perf.c/perf_images.h Matthew, o sticore.c: Add some consts to suppress compile warnings. Signed-off-by: NHelge Deller <deller@parisc-linux.org> Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
- 11 1月, 2006 2 次提交
-
-
由 Grant Grundler 提交于
Deal with overlapping LBA MMIO resources, rp3440 PDC BUG: PDC reports lmmio range for the last rope that overlaps with the CPU HPA. Console output was: ... Found devices: 1. Storm Peak Fast at 0xfffffffffe798000 [152] { 0, 0x0, 0x889, 0x00004 } 2. Storm Peak Fast at 0xfffffffffe799000 [153] { 0, 0x0, 0x889, 0x00004 } ... FAILED: lba_fixup_bus() request for lmmio_space [fffffffff0000000/fffffffffecffffe] Output is now: LBA: Truncating lmmio_space [fffffffff0000000/fffffffffecffffe] to [fffffffff0000000,fffffffffe797fff] My only concern with this patch is how C8000 (PAT PDC) will report elmmio ranges when a gfx card is installed. I'll have to test this another day. Signed-off-by: NGrant Grundler <grundler@parisc-linux.org> Signed-off-by: NJames Bottomley <jejb@parisc-linux.org> Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Helge Deller 提交于
Flag a whole bunch of things as __read_mostly on parisc. Also flag a few branches as unlikely() and cleanup a bit of code. Signed-off-by: NHelge Deller <deller@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
- 22 10月, 2005 1 次提交
-
-
由 Matthew Wilcox 提交于
Convert pa_dev->hpa from an unsigned long to a struct resource. Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org> Fix up users of ->hpa to use ->hpa.start instead. Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
- 28 6月, 2005 1 次提交
-
-
由 Rajesh Shah 提交于
When you hot-plug a (root) bridge hierarchy, it may have p2p bridges and devices attached to it that have not been configured by firmware. In this case, we need to configure the devices before starting them. This patch separates device start from device scan so that we can introduce the configuration step in the middle. I kept the existing semantics for pci_scan_bus() since there are a huge number of callers to that function. Also, I have no way of testing the changes I made to the parisc files, so this needs review by those folks. Sorry for the massive cross-post, this touches files in many different places. Signed-off-by: NRajesh Shah <rajesh.shah@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-