After creating the TRACE_EVENT_TEMPLATE I started to look at other
trace points to see what duplication was made. I noticed that there
are several trace points where they are almost identical except for
the name and the output format. Since TRACE_EVENT_TEMPLATE was successful
in bringing down the size of trace events, I added a DEFINE_EVENT_PRINT.

DEFINE_EVENT_PRINT is used just like DEFINE_EVENT is. That is, the
DEFINE_EVENT_PRINT also uses a TRACE_EVENT_TEMPLATE, but it allows the
developer to overwrite the print format. If there are two or more
TRACE_EVENTS that are identical except for the name and print, then
they can be converted to use a TRACE_EVENT_TEMPLATE. Since the
TRACE_EVENT_TEMPLATE already does the print output, the first trace event
would have its print format held in the TRACE_EVENT_TEMPLATE and
be defined with a DEFINE_EVENT. The rest will use the DEFINE_EVENT_PRINT
and override the print format.

Converting the sched trace points to both DEFINE_EVENT and
DEFINE_EVENT_PRINT. Five were converted to DEFINE_EVENT and two were
converted to DEFINE_EVENT_PRINT.

I was able to get the following:

$ size kernel/sched.o-*
   text	   data	    bss	    dec	    hex	filename
  79299	   6776	   2520	  88595	  15a13	kernel/sched.o-notrace
 101941	  11896	   2584	 116421	  1c6c5	kernel/sched.o-templ
 104779	  11896	   2584	 119259	  1d1db	kernel/sched.o-trace

sched.o-notrace is the scheduler compiled with no trace points.
sched.o-templ is with the use of DEFINE_EVENT and DEFINE_EVENT_PRINT
sched.o-trace is the current trace events.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

There are some places in the kernel that define several tracepoints and
they are all identical besides the name. The code to enable, disable and
record is created for every trace point even if most of the code is
identical.

This patch adds TRACE_EVENT_TEMPLATE that lets the developer create
a template TRACE_EVENT and create trace points with DEFINE_EVENT, which
is based off of a given template. Each trace point used by this
will share most of the code, and bring down the size of the kernel
when there are several duplicate events.

Usage is:

TRACE_EVENT_TEMPLATE(name, proto, args, tstruct, assign, print);

Which would be the same as defining a normal TRACE_EVENT.

To create the trace events that the trace points will use:

DEFINE_EVENT(template, name, proto, args) is done. The template
is the name of the TRACE_EVENT_TEMPLATE to use. The name is the
name of the trace point. The parameters proto and args must be the same
as the proto and args of the template. If they are not the same,
then a compile error will result. I tried hard removing this duplication
but the C preprocessor is not powerful enough (or my CPP magic
experience points is not at a high enough level) to not need them.

A lot of trace events are coming in with new XFS development. Most of
the trace points are identical except for the name. The following shows
the advantage of having TRACE_EVENT_TEMPLATE:

$ size fs/xfs/xfs.o.*
    text          data     bss     dec     hex filename
  452114          2788    3520  458422   6feb6 fs/xfs/xfs.o.old
  638482         38116    3744  680342   a6196 fs/xfs/xfs.o.template
  996954         38116    4480 1039550   fdcbe fs/xfs/xfs.o.trace

xfs.o.old is without any tracepoints.
xfs.o.template uses the new TRACE_EVENT_TEMPLATE.
xfs.o.trace uses the current TRACE_EVENT macros.
Requested-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Fix a misplaced ifdef. We need the perf event headers also in
off-case to avoid the following build error:

 include/linux/hw_breakpoint.h:94: error: expected declaration specifiers or '...' before 'perf_callback_t'
 include/linux/hw_breakpoint.h:102: error: expected declaration specifiers or '...' before 'perf_callback_t'
 include/linux/hw_breakpoint.h:109: error: expected declaration specifiers or '...' before 'perf_callback_t'
 include/linux/hw_breakpoint.h:116: error: expected declaration specifiers or '...' before 'perf_callback_t'
Reported-by: NKisskb-bot by Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
LKML-Reference: <1259011812-8093-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

E.g.:

  [root@doppio linux-2.6-tip]# perf kmem record sleep 3s
  [ perf record: Woken up 2 times to write data ]
  [ perf record: Captured and wrote 0.804 MB perf.data (~35105 samples) ]

  [root@doppio linux-2.6-tip]# perf kmem --stat caller | head -10
  ------------------------------------------------------------------------------
  Callsite                    |Total_alloc/Per | Total_req/Per | Hit  | Frag
  ------------------------------------------------------------------------------
  getname/40                  | 1519616/4096   | 1519616/4096  |   371|   0.000%
  seq_read/a2                 |  987136/4096   |  987136/4096  |   241|   0.000%
  __netdev_alloc_skb/43       |  260368/1049   |  259968/1048  |   248|   0.154%
  __alloc_skb/5a              |   77312/256    |   77312/256   |   302|   0.000%
  proc_alloc_inode/33         |   76480/632    |   76472/632   |   121|   0.010%
  get_empty_filp/8d           |   70272/192    |   70272/192   |   366|   0.000%
  split_vma/8e                |   42064/176    |   42064/176   |   239|   0.000%
  [root@doppio linux-2.6-tip]#
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: linux-mm@kvack.org <linux-mm@kvack.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1259005869-13487-2-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

So that they can be used in other tools.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259005869-13487-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Now that we can check the buildid to see if it really matches,
this can be done safely:

  vmlinux
  /boot/vmlinux
  /boot/vmlinux-<uts.release>
  /lib/modules/<uts.release>/build/vmlinux
  /usr/lib/debug/lib/modules/%s/vmlinux

More can be added - if you know about distros that put the
vmlinux somewhere else please let us know.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259001550-8194-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add the breakpoint events support with this new sysnopsis:

  mem:addr[:access]

Where addr is a raw addr value in the kernel and access can be
either [r][w][x]

Example to profile tasklist_lock:

	$ grep tasklist_lock /proc/kallsyms
	ffffffff8189c000 D tasklist_lock

	$ perf record -e mem:0xffffffff8189c000:rw -a -f -c 1
	$ perf report

	# Samples: 62
	#
	# Overhead          Command  Shared Object  Symbol
	# ........  ...............  .............  ......
	#
	    29.03%          swapper  [kernel]       [k] _raw_read_trylock
	    29.03%          swapper  [kernel]       [k] _raw_read_unlock
	    19.35%             init  [kernel]       [k] _raw_read_trylock
	    19.35%             init  [kernel]       [k] _raw_read_unlock
	     1.61%         events/0  [kernel]       [k] _raw_read_trylock
	     1.61%         events/0  [kernel]       [k] _raw_read_unlock

Coming soon:

 - Support for symbols in the event definition.

 - Default period to 1 for breakpoint events because these are
   not high frequency events. The same thing is needed for trace
   events.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
LKML-Reference: <1258987355-8751-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>

Add the remaining necessary bits to support breakpoints created
through perf syscall.

We don't use the software counter interface as:

- We don't need to check against recursion, this is already done
  in hardware breakpoints arch level.

- We already know the perf event we are dealing with when the
  event is to be committed.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
LKML-Reference: <1258987355-8751-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Perf tools create perf events as disabled in the beginning.
Breakpoints are then considered like ptrace temporary
breakpoints, only meant to reserve a breakpoint slot until we
get all the necessary informations from the user.

In this case, we don't check the address that is breakpointed as
it is NULL in the ptrace case.

But perf tools don't have the same purpose, events are created
disabled to wait for all events to be created before enabling
all of them. We want to check the breakpoint parameters in this
case.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
LKML-Reference: <1258987355-8751-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

As userspace only needs the breakpoints enum types from the
breakpoints headers.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
LKML-Reference: <1258987355-8751-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Attribute authorship to developers of hw-breakpoint related
files.
Signed-off-by: NK.Prasad <prasad@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091123154713.GA5593@in.ibm.com>
[ v2: moved it to latest -tip ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>

It is quite possible to call update_event_times() on a context
that isn't actually running and thereby confuse the thing.

perf stat was reporting !100% scale values for software counters
(2e2af50b perf_events: Disable events when we detach them,
solved the worst of that, but there was still some left).

The thing that happens is that because we are not self-reaping
(we have a caring parent) there is a time between the last
schedule (out) and having do_exit() called which will detach the
events.

This period would be accounted as enabled,!running because the
event->state==INACTIVE, even though !event->ctx->is_active.

Similar issues could have been observed by calling read() on a
event while the attached task was not scheduled in.

Solve this by teaching update_event_times() about
ctx->is_active.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1258984836.4531.480.camel@laptop>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Make perf_swevent_get_recursion_context return a context number
and disable preemption.

This could be used to remove the IRQ disable from the trace bit
and index the per-cpu buffer with.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091123103819.993226816@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Move the update_event_times() call in __perf_event_exit_task()
into list_del_event() because that holds the proper lock
(ctx->lock) and seems a more natural place to do the last time
update.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091123103819.842455480@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

It appeared we did call update_event_times() on exit, but we
failed to update the context time, which renders the former
moot.

Locking is a bit iffy, we call update_event_times under
ctx->mutex instead of ctx->lock - the next patch fixes this.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091123103819.764207355@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

If we leave the event in STATE_INACTIVE, any read of the event
after the detach will increase the running count but not the
enabled count and cause funny scaling artefacts.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091123103819.689055515@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091123103819.613427378@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We had two almost identical functions, avoid the duplication.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091123103819.537537928@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The structure init creates a bit memcpy, which shows
up big time in perf annotate output:

          :      ffffffff810a859d <__perf_sw_event>:
     1.68 :      ffffffff810a859d:       55                      push   %rbp
     1.69 :      ffffffff810a859e:       41 89 fa                mov    %edi,%r10d
     0.01 :      ffffffff810a85a1:       49 89 c9                mov    %rcx,%r9
     0.00 :      ffffffff810a85a4:       31 c0                   xor    %eax,%eax
     1.71 :      ffffffff810a85a6:       b9 16 00 00 00          mov    $0x16,%ecx
     0.00 :      ffffffff810a85ab:       48 89 e5                mov    %rsp,%rbp
     0.00 :      ffffffff810a85ae:       48 83 ec 60             sub    $0x60,%rsp
     1.52 :      ffffffff810a85b2:       48 8d 7d a0             lea    -0x60(%rbp),%rdi
    85.20 :      ffffffff810a85b6:       f3 ab                   rep stos %eax,%es:(%rdi)

None of the callees depends on the structure being pre-initialized,
so only initialize ->addr. This gets rid of the memcpy overhead.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Decreases perf overhead when function tracing is enabled,
by about 50%.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Print more accurate error message when "perf record" fails because
there is no APIC support, on x86.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

gcc with no flags typically is a sane default for systems to
use, and looking at the running kernel is probably broken for
cross-builds anyway, so let's not do this.  Add EXTRA_CFLAGS so
that users can override default gcc mode if they want to.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NArjan van de Ven <arjan@infradead.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091122121335.GA24254@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Bug introduced in 439d473b,
making the initial map be used for all IPs, so that symbols
outside this initial map would either be erroneously resolved or
not resolve at all.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258909162-28496-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Suggested-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258903301-20584-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

On error, suggest installing static libraries
along with shared libraries.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091122131311.GA24318@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Make standard error show up on console when V=2 is set.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091122112726.GC13644@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Fix:

  ERROR: "perf_swevent_put_recursion_context" [fs/ext4/ext4.ko] undefined!
  ERROR: "perf_swevent_get_recursion_context" [fs/ext4/ext4.ko] undefined!

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
LKML-Reference: <1258864015-10579-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The write_event() function in builtin-record.c writes out all
mmap()'d DSOs including non-ELF files like GNOME resource files
and such.

Therefore, check for ELF_K_ELF in filename__read_build_id()
before attempting to read the ELF header with gelf_getehdr().

Fixes the following error messages when running "perf kmem
record":

  penberg@penberg-laptop:~/src/linux/tools/perf$ perf kmem record
  ^C[ perf record: Woken up 2 times to write data ]
  [ perf record: Captured and wrote 0.753 MB perf.data (~32885 samples) ]
  filename__read_build_id: cannot get elf header.
  filename__read_build_id: cannot get elf header.
  filename__read_build_id: cannot get elf header.
  filename__read_build_id: cannot get elf header.
  filename__read_build_id: cannot get elf header.
  filename__read_build_id: cannot get elf header.
  filename__read_build_id: cannot get elf header.
  filename__read_build_id: cannot get elf header.
  filename__read_build_id: cannot get elf header.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1258885784-11709-1-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds support for "--sort hit" and "--sort frag" to
the "perf kmem" tool. The former was already mentioned in the
help text and the latter is useful for finding call-sites that
exhibit worst case behavior for SLAB allocators.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: linux-mm@kvack.org <linux-mm@kvack.org>
LKML-Reference: <1258883880-7149-1-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The buffer is first zeroed out by memset(). Then strncpy() is
used to fill the content. The strncpy() function also pads the
string till the end of the specified length, which is redundant.
The strncpy() does not ensures that the string will be properly
closed with 0. Use strlcpy() instead.

The semantic match that finds this kind of pattern is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression buffer;
expression size;
expression str;
@@
	memset(buffer, 0, size);
	...
-	strncpy(
+	strlcpy(
	buffer, str, sizeof(buffer)
	);
@@
expression buffer;
expression size;
expression str;
@@
	memset(&buffer, 0, size);
	...
-	strncpy(
+	strlcpy(
	&buffer, str, sizeof(buffer));
@@
expression buffer;
identifier field;
expression size;
expression str;
@@
	memset(buffer, 0, size);
	...
-	strncpy(
+	strlcpy(
	buffer->field, str, sizeof(buffer->field)
	);
@@
expression buffer;
identifier field;
expression size;
expression str;
@@
	memset(&buffer, 0, size);
	...
-	strncpy(
+	strlcpy(
	buffer.field, str, sizeof(buffer.field));
// </smpl>

On strncpy() vs strlcpy() see
http://www.gratisoft.us/todd/papers/strlcpy.html .
Signed-off-by: NMárton Németh <nm127@freemail.hu>
Cc: Julia Lawall <julia@diku.dk>
Cc: cocci@diku.dk
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4B086547.5040100@freemail.hu>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

So that we can include this header from userspace tools, like
perf tools, to get the breakpoint types and len definitions.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
LKML-Reference: <1258863695-10464-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Remove asm/processor.h and asm/debugreg.h as these headers are
not used anymore in the hw-breakpoints core file.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
LKML-Reference: <1258863695-10464-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We are never in an NMI context when we commit a syscall trace to
perf. So just forget about the nmi buffer there.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Baron <jbaron@redhat.com>
LKML-Reference: <1258863695-10464-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When we commit a trace to perf, we first check if we are
recursing in the same buffer so that we don't mess-up the buffer
with a recursing trace. But later on, we do the same check from
perf to avoid commit recursion. The recursion check is desired
early before we touch the buffer but we want to do this check
only once.

Then export the recursion protection from perf and use it from
the trace events before submitting a trace.

v2: Put appropriate Reported-by tag
Reported-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
LKML-Reference: <1258864015-10579-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

It better propagate errors, also if we do a simple:

[root@doppio linux-2.6-tip]# perf record -R -a -f sleep 3s ;
perf trace [ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.182 MB perf.data (~7972 samples) ]
Fatal: not an trace data file
[root@doppio linux-2.6-tip]#

That is what is expected, right? I.e. as we didn't specify any
tracepoint event via -e, it should gracefully bail out and not
SEGFAULT.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258821086-11521-3-git-send-email-acme@infradead.org>
[ Fixed the error messages some more ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258821086-11521-2-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We better call this routine after both the kernel and modules
are loaded, because as it was if there weren't modules it would not
be called, resulting in kernel_map->end remaining at zero, so no
map would be found and consequently the kernel symtab wouldn't
get loaded, i.e. no kernel symbols would be resolved.

Also this fixes another case, that is when we _have_ modules,
but the last map would have its ->end address not set before we
loaded its symbols, which would never happen because ->end was
not set.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258821086-11521-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch fixes the default watermark value for the sampling
buffer. With the existing calculation (watermark =
max(PAGE_SIZE, max_size / 2)), no notification was ever received
when the buffer was exactly 1 page. This was because you would
never cross the threshold (there is no partial samples).

In certain configuration, there was no possibilty detecting the
problem because there was not enough space left to store the
LOST record.In fact, there may be a more generic problem here.
The kernel should ensure that there is alaways enough space to
store one LOST record.

This patch sets the default watermark to half the buffer size.
With such limit, we are guaranteed to get a notification even
with a single page buffer assuming no sample is bigger than a
page.
Signed-off-by: NStephane Eranian <eranian@gmail.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091120212509.344964101@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
LKML-Reference: <1256302576-6169-1-git-send-email-eranian@gmail.com>

We should hold event->child_mutex when iterating the inherited
counters, we should hold ctx->mutex when iterating siblings.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091120212509.251030114@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Properly account the full hierarchy of counters for both the
count (we already did so) and the scale times (new).
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091120212509.153379276@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>