- 06 8月, 2009 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
If the current CPU doesn't support performance counters, cur_cpu_spec->oprofile_cpu_type can be NULL. The current perf_counter modules don't test for that case and would thus crash at boot time. Bug reported by David Woodhouse. Reported-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NPaul Mackerras <paulus@samba.org> LKML-Reference: <19066.48028.446975.501454@cargo.ozlabs.ibm.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 08 7月, 2009 1 次提交
-
-
由 Huang Weiyi 提交于
Remove duplicated #include('s) in arch/powerpc/kernel/mpc7450-pmu.c arch/powerpc/kernel/ppc970-pmu.c Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 18 6月, 2009 2 次提交
-
-
由 Paul Mackerras 提交于
At present, the powerpc generic (processor-independent) perf_counter code has list of processor back-end modules, and at initialization, it looks at the PVR (processor version register) and has a switch statement to select a suitable processor-specific back-end. This is going to become inconvenient as we add more processor-specific back-ends, so this inverts the order: now each back-end checks whether it applies to the current processor, and registers itself if so. Furthermore, instead of looking at the PVR, back-ends now check the cur_cpu_spec->oprofile_cpu_type string and match on that. Lastly, each back-end now specifies a name for itself so the core can print a nice message when a back-end registers itself. This doesn't provide any support for unregistering back-ends, but that wouldn't be hard to do and would allow back-ends to be modules. Signed-off-by: NPaul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55529.762227.518531@cargo.ozlabs.ibm.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Paul Mackerras 提交于
This changes the powerpc perf_counter back-end to use unsigned long types for hardware register values and for the value/mask pairs used in checking whether a given set of events fit within the hardware constraints. This is in preparation for adding support for the PMU on some 32-bit powerpc processors. On 32-bit processors the hardware registers are only 32 bits wide, and the PMU structure is generally simpler, so 32 bits should be ample for expressing the hardware constraints. On 64-bit processors, unsigned long is 64 bits wide, so using unsigned long vs. u64 (unsigned long long) makes no actual difference. This makes some other very minor changes: adjusting whitespace to line things up in initialized structures, and simplifying some code in hw_perf_disable(). Signed-off-by: NPaul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55473.26174.331511@cargo.ozlabs.ibm.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 11 6月, 2009 3 次提交
-
-
由 Peter Zijlstra 提交于
The top (fastest) and last level (biggest) caches are the most interesting ones, performance wise. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> [ Fixed the Nehalem LL table to LLC Reference/Miss events ] Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Pure renames only, to PERF_COUNT_HW_* and PERF_COUNT_SW_*. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Paul Mackerras 提交于
This adds tables of event codes for the generalized cache events for all the currently supported powerpc processors: POWER{4,5,5+,6,7} and PPC970*, plus powerpc-specific code to use these tables when a generalized cache event is requested. Signed-off-by: NPaul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <18992.36430.933526.742969@drongo.ozlabs.ibm.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 15 5月, 2009 1 次提交
-
-
由 Paul Mackerras 提交于
Although the perf_counter API allows 63-bit raw event codes, internally in the powerpc back-end we had been using 32-bit event codes. This expands them to 64 bits so that we can add bits for specifying threshold start/stop events and instruction sampling modes later. This also corrects the return value of can_go_on_limited_pmc; we were returning an event code rather than just a 0/1 value in some circumstances. That didn't particularly matter while event codes were 32-bit, but now that event codes are 64-bit it might, so this fixes it. [ Impact: extend PowerPC perfcounter interfaces from u32 to u64 ] Signed-off-by: NPaul Mackerras <paulus@samba.org> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <18955.36874.472452.353104@drongo.ozlabs.ibm.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 29 4月, 2009 1 次提交
-
-
由 Paul Mackerras 提交于
POWER5+ and POWER6 have two hardware counters with limited functionality: PMC5 counts instructions completed in run state and PMC6 counts cycles in run state. (Run state is the state when a hardware RUN bit is 1; the idle task clears RUN while waiting for work to do and sets it when there is work to do.) These counters can't be written to by the kernel, can't generate interrupts, and don't obey the freeze conditions. That means we can only use them for per-task counters (where we know we'll always be in run state; we can't put a per-task counter on an idle task), and only if we don't want interrupts and we do want to count in all processor modes. Obviously some counters can't go on a limited hardware counter, but there are also situations where we can only put a counter on a limited hardware counter - if there are already counters on that exclude some processor modes and we want to put on a per-task cycle or instruction counter that doesn't exclude any processor mode, it could go on if it can use a limited hardware counter. To keep track of these constraints, this adds a flags argument to the processor-specific get_alternatives() functions, with three bits defined: one to say that we can accept alternative event codes that go on limited counters, one to say we only want alternatives on limited counters, and one to say that this is a per-task counter and therefore events that are gated by run state are equivalent to those that aren't (e.g. a "cycles" event is equivalent to a "cycles in run state" event). These flags are computed for each counter and stored in the counter->hw.counter_base field (slightly wonky name for what it does, but it was an existing unused field). Since the limited counters don't freeze when we freeze the other counters, we need some special handling to avoid getting skew between things counted on the limited counters and those counted on normal counters. To minimize this skew, if we are using any limited counters, we read PMC5 and PMC6 immediately after setting and clearing the freeze bit. This is done in a single asm in the new write_mmcr0() function. The code here is specific to PMC5 and PMC6 being the limited hardware counters. Being more general (e.g. having a bitmap of limited hardware counter numbers) would have meant more complex code to read the limited counters when freezing and unfreezing the normal counters, with conditional branches, which would have increased the skew. Since it isn't necessary for the code to be more general at this stage, it isn't. This also extends the back-ends for POWER5+ and POWER6 to be able to handle up to 6 counters rather than the 4 they previously handled. Signed-off-by: NPaul Mackerras <paulus@samba.org> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <18936.19035.163066.892208@cargo.ozlabs.ibm.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 08 4月, 2009 1 次提交
-
-
由 Paul Mackerras 提交于
Impact: enable access to hardware feature POWER processors have the ability to "mark" a subset of the instructions and provide more detailed information on what happens to the marked instructions as they flow through the pipeline. This marking is enabled by the "sample enable" bit in MMCRA, and there are synchronization requirements around setting and clearing the bit. This adds logic to the processor-specific back-ends so that they know which events relate to marked instructions and set the sampling enable bit if any event that we want to put on the PMU is a marked instruction event. It also adds logic to the generic powerpc code to do the necessary synchronization if that bit is set. Signed-off-by: NPaul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <18908.31930.1024.228867@cargo.ozlabs.ibm.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 10 1月, 2009 1 次提交
-
-
由 Paul Mackerras 提交于
This adds the back-end for the PMU on the PPC970 family. The PPC970 allows events from the ISU to be selected in two different ways. Rather than use alternative event codes to express this, we instead use a single encoding for ISU events and express the resulting constraint (that you can't select events from all three of FPU/IFU/VPU, ISU and IDU/STS at the same time, since they all come in through only 2 multiplexers) using a NAND constraint field, and work out which multiplexer is used for ISU events at compute_mmcr time. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-