- 30 12月, 2008 40 次提交
-
-
由 Devin Heitmueller 提交于
The current code was trying to query the AC97 registers for the vendor information even if it was clearly not a AC97 audio device (resulting in errors in the dmesg output). This was due to a bug in the way we did the check. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Add additional output formats, which will be useful for the Pinnacle PCTV Ultimate 880e integration with the saa7136. Thanks to Ray Lu from Empia for providing the em2860/em2880 datasheet. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Noticed when doing the audio support for the Pinnacle PCTV HD Ultimate 808e that the modes were incorrect (the 808e uses I2S in 5 sample mode) Thanks for Ray Lu from Empia for providing the em2860/em2880 datasheet. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Like the em2874, the em2870 does not have any analog support, so don't bother loading the em28xx-alsa module. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
The Pinnacle 80e cannot be supported since Micronas yanked their driver support for the drx-j chipset at the last minute. Remove the device profile since it cannot work without the drx driver and it being there is only likely to confuse people into thinking the device is supported but not working. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
The DVC 100 profile is redundant since we already have an existing identical profile named "Pinnacle Dazzle DVC 90/DVC 100" Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
Correct problem introduced during the board refactoring where the XCLK frequency would get zero'd out. The sequence of events was as follows: em28xx_pre_card_setup() called em28xx_set_model() em28xx_set_model() would memcpy to dev->board configuration em28xx_pre_card_setup() would set the dev->board.xclk if not set em28xx_pre_card_setup() would set the XCLK register based on dev->board.xclk ... em28xx_card_setup() would call em28xx_set_model() em28xx_set_model() would memcpy to dev->board configuration (clearing out value of dev->board.xclk set in em28xx_pre_card_setup) ... em28xx_audio_analog_set() sets the XCLK register based on dev->board.xclk (which now contains zero) The change sets the default XCLK and I2C Clock fields in the board definition inside of em28xx_set_model() so that subsequent calls do not cause the values to be overwritten. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Fix this warning: drivers/media/video/zoran/zoran_card.c:156: warning: ‘zr36067_pci_tbl’ defined but not used Currently, zoran driver relies on a find routine that doesn't use the pci table. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
drivers/media/dvb/frontends/af9013.c: In function ‘af9013_set_coeff’: drivers/media/dvb/frontends/af9013.c:231: warning: ‘ns_coeff2_8k’ may be used uninitialized in this function drivers/media/dvb/frontends/af9013.c:230: warning: ‘ns_coeff2_2k’ may be used uninitialized in this function drivers/media/dvb/frontends/af9013.c:229: warning: ‘ns_coeff1_8193nu’ may be used uninitialized in this function drivers/media/dvb/frontends/af9013.c:228: warning: ‘ns_coeff1_8192nu’ may be used uninitialized in this function drivers/media/dvb/frontends/af9013.c:227: warning: ‘ns_coeff1_8191nu’ may be used uninitialized in this function drivers/media/dvb/frontends/af9013.c:226: warning: ‘ns_coeff1_2048nu’ may be used uninitialized in this function drivers/media/dvb/frontends/af9013.c: In function ‘af9013_update_snr’: drivers/media/dvb/frontends/af9013.c:1012: warning: ‘snr_table’ may be used uninitialized in this function Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
This is needed to sync with the development tree. Probably, a merge conflict were solved by adding this blank line. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
drivers/media/video/usbvideo/quickcam_messenger.c: In function ‘qcm_sensor_init’: drivers/media/video/usbvideo/quickcam_messenger.c:450: warning: operation on ‘ret’ may be undefined Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
This patch fixes this warning: drivers/media/video/gspca/gspca.c:1811: warning: initialization from incompatible pointer type The reason is that the returned argument should be a long, not an integer. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
drivers/media/dvb/dvb-usb/anysee.c: In function ‘anysee_master_xfer’: drivers/media/dvb/dvb-usb/anysee.c:156: warning: ‘ret’ may be used uninitialized By looking at the function, altrough very unlikely, this might eventually be true if num = 0. So, better to fix the warning by initializing with ret = 0. Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Extend the range of supported UVC devices by allowing video output devices matching the following structure: TT_STREAMING -> VC_PROCESSING_UNIT -> VC_EXTENSION_UNIT{0,n} -> OTT_* Video output devices are reported with the V4L2_CAP_VIDEO_OUTPUT capability flag and are subject to the same restrictions as video input devices. Signed-off-by: NLaurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
Built-in iSight webcams have an interrupt endpoint but spit proprietary data that don't conform to the UVC status endpoint messages. Don't try to handle the interrupt endpoint for those cameras. Signed-off-by: NLaurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
When the first bulk URB of a video payload contains an erroneous header, or when no V4L2 buffer is available, the whole payload must be dropped. Change the skip logic to drop all bulk URBs until the end of the payload instead of the first one only. Signed-off-by: NLaurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
This camera is rather similar to MT9M001, but also has a couple of enhanced features, like pixel binning. create mode 100644 drivers/media/video/mt9t031.c Signed-off-by: NGuennadi Liakhovetski <lg@denx.de> Acked-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Kuninori Morimoto 提交于
Don't modify driver's state in try_fmt, just verify format acceptability or adjust it to driver's capabilities. Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Kuninori Morimoto 提交于
priv->scale is checked in start_capture. Therefore, it should be NULL if failing in set_fmt. This patch resolve this problem. Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Kuninori Morimoto 提交于
This patch adds tw9910 driver that use soc_camera framework. It was tested on SH Migo-r board and mplayer. create mode 100644 drivers/media/video/tw9910.c create mode 100644 include/media/tw9910.h Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
Signed-off-by: NGuennadi Liakhovetski <lg@denx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
sh_mobile_ceu_camera.c is already prepared to support interlaced format, this patch moves the choice of a field type down to host and / or camera drivers. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Magnus Damm 提交于
This patch cleans up the sh_mobile_ceu driver and adds comments and constants to clarify the magic sequence in sh_mobile_ceu_capture(). Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Kuninori Morimoto 提交于
This patch presents new method to be able to select V4L2 input type Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Kuninori Morimoto 提交于
This patch presents new method to be able to check v4l2_std_id Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Magnus Damm 提交于
This patch adds NV16/NV61 support to the sh_mobile_ceu driver. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Magnus Damm 提交于
This patch adds NV12/NV21 support to the sh_mobile_ceu driver. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
Move mutex from host drivers to camera device object, take into account videobuf locking. Signed-off-by: NGuennadi Liakhovetski <lg@denx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
With the introduction of the format conversion support in soc-camera, we now also have to take care to pass the correct pixel format to the camera driver when calling its try_fmt() method. Signed-off-by: NGuennadi Liakhovetski <lg@denx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
Simplify multiple drivers by replacing f->fmt.pix.* with a single pointer dereference, merge some needlessly broken lines, verify host and camera operations pointers on registration. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Magnus Damm 提交于
This patch converts the sh_mobile_ceu driver to make use of the new pixel format translation code. Only pass-though mode at this point. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mike Rapoport 提交于
Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
Using PXA270's FIFO inactivity time-out register (CITOR) reduces FIFO overruns. The time-out is calculated in CICLK / LCDCLK ticks and has to be longer than one pixel time. For this we have to know the pixel clock frequency, which usually is provided by the camera. We use the struct soc_camera_sense to request PCLK frequency from the camera driver upon each data format change. Tested-by: NRobert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Robert Jarzmik 提交于
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
As reported by Antonio Ospite <ospite@studenti.unina.it> two platforms with a mt9m111 camera require opposite pixel clock polarity, which means one of them inverts it. This patch adds support for inversion flags and switches all available camera drivers to using them. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Eric Miao 提交于
Signed-off-by: NEric Miao <eric.miao@marvell.com> Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-