- 23 10月, 2013 4 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: "Sorry I let so much accumulate, I was in Buffalo and wanted a few things to cook in my tree for a while before sending to you. Anyways, it's a lot of little things as usual at this stage in the game" 1) Make bonding MAINTAINERS entry reflect reality, from Andy Gospodarek. 2) Fix accidental sock_put() on timewait mini sockets, from Eric Dumazet. 3) Fix crashes in l2tp due to mis-handling of ipv4 mapped ipv6 addresses, from François CACHEREUL. 4) Fix heap overflow in __audit_sockaddr(), from the eagle eyed Dan Carpenter. 5) tcp_shifted_skb() doesn't take handle FINs properly, from Eric Dumazet. 6) SFC driver bug fixes from Ben Hutchings. 7) Fix TX packet scheduling wedge after channel change in ath9k driver, from Felix Fietkau. 8) Fix user after free in BPF JIT code, from Alexei Starovoitov. 9) Source address selection test is reversed in __ip_route_output_key(), fix from Jiri Benc. 10) VLAN and CAN layer mis-size netlink attributes, from Marc Kleine-Budde. 11) Fix permission checks in sysctls to use current_euid() instead of current_uid(). From Eric W Biederman. 12) IPSEC policies can go away while a timer is still pending for them, add appropriate ref-counting to fix, from Steffen Klassert. 13) Fix mis-programming of FDR and RMCR registers on R8A7740 sh_eth chips, from Nguyen Hong Ky and Simon Horman. 14) MLX4 forgets to DMA unmap pages on RX, fix from Amir Vadai. 15) IPV6 GRE tunnel MTU upper limit is miscalculated, from Oussama Ghorbel. 16) Fix typo in fq_change(), we were assigning "initial quantum" to "quantum". From Eric Dumazet. 17) Set a more appropriate sk_pacing_rate for non-TCP sockets, otherwise FQ packet scheduler does not pace those flows properly. Also from Eric Dumazet. 18) rtlwifi miscalculates packet pointers, from Mark Cave-Ayland. 19) l2tp_xmit_skb() can be called from process context, not just softirq context, so we must always make sure to BH disable around it. From Eric Dumazet. 20) On qdisc reset, we forget to purge the RB tree of SKBs in netem packet scheduler. From Stephen Hemminger. 21) Fix info leak in farsync WAN driver ioctl() handler, from Dan Carpenter and Salva Peiró. 22) Fix PHY reset and other issues in dm9000 driver, from Nikita Kiryanov and Michael Abbott. 23) When hardware can do SCTP crc32 checksums, we accidently don't disable the csum offload when IPSEC transformations have been applied. From Fan Du and Vlad Yasevich. 24) Tail loss probing in TCP leaves the socket in the wrong congestion avoidance state. From Yuchung Cheng. 25) In CPSW driver, enable NAPI before interrupts are turned on, from Markus Pargmann. 26) Integer underflow and dual-assignment in YAM hamradio driver, from Dan Carpenter. 27) If we are going to mangle a packet in tcp_set_skb_tso_segs() we must unclone it. This fixes various hard to track down crashes in drivers where the SKBs ->gso_segs was changing right from underneath the driver during TX queueing. From Eric Dumazet. 28) Fix the handling of VLAN IDs, and in particular the special IDs 0 and 4095, in the bridging layer. From Toshiaki Makita. 29) Another info leak, this time in wanxl WAN driver, from Salva Peiró. 30) Fix race in socket credential passing, from Daniel Borkmann. 31) WHen NETLABEL is disabled, we don't validate CIPSO packets properly, from Seif Mazareeb. 32) Fix identification of fragmented frames in ipv4/ipv6 UDP Fragmentation Offload output paths, from Jiri Pirko. 33) Virtual Function fixes in bnx2x driver from Yuval Mintz and Ariel Elior. 34) When we removed the explicit neighbour pointer from ipv6 routes a slight regression was introduced for users such as IPVS, xt_TEE, and raw sockets. We mix up the users requested destination address with the routes assigned nexthop/gateway. From Julian Anastasov and Simon Horman. 35) Fix stack overruns in rt6_probe(), the issue is that can end up doing two full packet xmit paths at the same time when emitting neighbour discovery messages. From Hannes Frederic Sowa. 36) davinci_emac driver doesn't handle IFF_ALLMULTI correctly, from Mariusz Ceier. 37) Make sure to set TCP sk_pacing_rate after the first legitimate RTT sample, from Neal Cardwell. 38) Wrong netlink attribute passed to xfrm_replay_verify_len(), from Steffen Klassert. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (152 commits) ax88179_178a: Add VID:DID for Samsung USB Ethernet Adapter ax88179_178a: Correct the RX error definition in RX header Revert "bridge: only expire the mdb entry when query is received" tcp: initialize passive-side sk_pacing_rate after 3WHS davinci_emac.c: Fix IFF_ALLMULTI setup mac802154: correct a typo in ieee802154_alloc_device() prototype ipv6: probe routes asynchronous in rt6_probe netfilter: nf_conntrack: fix rt6i_gateway checks for H.323 helper ipv6: fill rt6i_gateway with nexthop address ipv6: always prefer rt6i_gateway if present bnx2x: Set NETIF_F_HIGHDMA unconditionally bnx2x: Don't pretend during register dump bnx2x: Lock DMAE when used by statistic flow bnx2x: Prevent null pointer dereference on error flow bnx2x: Fix config when SR-IOV and iSCSI are enabled bnx2x: Fix Coalescing configuration bnx2x: Unlock VF-PF channel on MAC/VLAN config error bnx2x: Prevent an illegal pointer dereference during panic bnx2x: Fix Maximum CoS estimation for VFs drivers: net: cpsw: fix kernel warn during iperf test with interrupt pacing ...
-
由 Freddy Xin 提交于
Add VID:DID for Samsung USB Ethernet Adapter. Signed-off-by: NFreddy Xin <freddy@asix.com.tw> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Freddy Xin 提交于
Correct the definition of AX_RXHDR_CRC_ERR and AX_RXHDR_DROP_ERR. They are BIT29 and BIT31 in pkt_hdr seperately. Signed-off-by: NFreddy Xin <freddy@asix.com.tw> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Lüssing 提交于
While this commit was a good attempt to fix issues occuring when no multicast querier is present, this commit still has two more issues: 1) There are cases where mdb entries do not expire even if there is a querier present. The bridge will unnecessarily continue flooding multicast packets on the according ports. 2) Never removing an mdb entry could be exploited for a Denial of Service by an attacker on the local link, slowly, but steadily eating up all memory. Actually, this commit became obsolete with "bridge: disable snooping if there is no querier" (b00589af) which included fixes for a few more cases. Therefore reverting the following commits (the commit stated in the commit message plus three of its follow up fixes): ==================== Revert "bridge: update mdb expiration timer upon reports." This reverts commit f144febd. Revert "bridge: do not call setup_timer() multiple times" This reverts commit 1faabf2a. Revert "bridge: fix some kernel warning in multicast timer" This reverts commit c7e8e8a8. Revert "bridge: only expire the mdb entry when query is received" This reverts commit 9f00b2e7. ==================== CC: Cong Wang <amwang@redhat.com> Signed-off-by: NLinus Lüssing <linus.luessing@web.de> Reviewed-by: NVlad Yasevich <vyasevich@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 10月, 2013 30 次提交
-
-
由 Mattia Dongili 提交于
Do not touch keyboard backlight unless explicitly passed a module parameter. In this way we won't make wrong assumptions about what are good default values since they actually are different from model to model. The only side effect is that we won't know what is the current value until set via the sysfs attributes. Signed-off-by: NMattia Dongili <malattia@linux.it> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Move kernel-doc notation to immediately before its function to eliminate kernel-doc warnings introduced by commit db14fc3a ("vfs: add d_walk()") Warning(fs/dcache.c:1343): No description found for parameter 'data' Warning(fs/dcache.c:1343): No description found for parameter 'dentry' Warning(fs/dcache.c:1343): Excess function parameter 'parent' description in 'check_mount' Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Cc: Miklos Szeredi <mszeredi@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Add @path parameter to fix kernel-doc warning. Also fix a spello/typo. Warning(fs/namei.c:2304): No description found for parameter 'path' Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "The pending last-minute ASoC fixes, all of which are driver-local (tlv320aic3x, rcar, pcm1681, pcm1792a, omap, fsl) and should be pretty safe to apply" * tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: Add MAINTAINERS entry for dmaengine helpers ASoC: pcm1792a: Fix max_register setting ASoC: pcm1681: Fix max_register setting ASoC: pcm1681: Fix max_register setting ASoC: rcar: fixup generation checker ASoC: tlv320aic3x: Connect 'Left Line1R Mux' and 'Right Line1L Mux' ASoC: fsl: imx-ssi: fix probe on imx31 ASoC: omap: Fix incorrect ARM dependency ASoC: fsl: Fix sound on mx31moboard ASoC: fsl_ssi: Fix irq_of_parse_and_map() return value check
-
git://github.com/kleikamp/linux-shaggy由 Linus Torvalds 提交于
Pull jfs bugfix from David Kleikamp: "Just a patch to fix an oops in an error path" * tag 'jfs-3.12' of git://github.com/kleikamp/linux-shaggy: jfs: fix error path in ialloc
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Travelling slowed down getting these out. Two vmwgfx fixes, a radeon revert to avoid a regression, i915 fixes, and some ioctl sizing issues fixed with 32 on 64" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/audio: don't set speaker allocation on DCE4+ drm/radeon: rework audio option drm/radeon/audio: don't set speaker allocation on DCE3.2 drm/radeon: make missing smc ucode non-fatal (CI) drm/radeon: make missing smc ucode non-fatal (r7xx-SI) drm/radeon/uvd: revert lower msg&fb buffer requirements on UVD3 drm/radeon: stop the leaks in cik_ib_test drm/radeon/atom: workaround vbios bug in transmitter table on rs780 drm/i915: Disable GGTT PTEs on GEN6+ suspend drm/i915: Make PTE valid encoding optional drm: Pad drm_mode_get_connector to 64-bit boundary drm: Prevent overwriting from userspace underallocating core ioctl structs drm/vmwgfx: Don't kill clients on VT switch drm/vmwgfx: Don't put resources with invalid id's on lru list drm/i915: disable LVDS clock gating on CPT v2
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
Pull HID fixes from Jiri Kosina: - a partial revert of exponent parsing changes to make "Unit" exponent item work properly again, by Nikolai Kondrashov - a few new device IDs additions piggy-backing, by AceLan Kao and David Herrmann * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: wiimote: add LEGO-wiimote VID HID: Fix unit exponent parsing again HID: usbhid: quirk for SiS Touchscreen HID: usbhid: quirk for Synaptics Large Touchccreen
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata由 Linus Torvalds 提交于
Pull libata fixes from Tejun Heo: "The only interesting bit is ata_eh_qc_retry() update which fixes a problem where a SG_IO command may fail across suspend/resume cycle without the command actually being at fault. Other changes are low level driver specific and fairly low impact" * 'for-3.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libahci: fix turning on LEDs in ahci_start_port() libata: make ata_eh_qc_retry() bump scmd->allowed on bogus failures ahci_platform: use dev_info() instead of printk() ahci: use dev_info() instead of printk() pata_isapnp: Don't use invalid I/O ports
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cgroup fixes from Tejun Heo: "Two late fixes for cgroup. One fixes descendant walk introduced during this rc1 cycle. The other fixes a post 3.9 bug during task attach which can lead to hang. Both fixes are critical and the fixes are relatively straight-forward" * 'for-3.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: fix to break the while loop in cgroup_attach_task() correctly cgroup: fix cgroup post-order descendant walk of empty subtree
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
Most just regression fixes for audio, dpm, and uvd, plus a resource leak fix for cik. * 'drm-fixes-3.12' of git://people.freedesktop.org/~agd5f/linux: drm/radeon/audio: don't set speaker allocation on DCE4+ drm/radeon: rework audio option drm/radeon/audio: don't set speaker allocation on DCE3.2 drm/radeon: make missing smc ucode non-fatal (CI) drm/radeon: make missing smc ucode non-fatal (r7xx-SI) drm/radeon/uvd: revert lower msg&fb buffer requirements on UVD3 drm/radeon: stop the leaks in cik_ib_test drm/radeon/atom: workaround vbios bug in transmitter table on rs780
-
由 Dave Airlie 提交于
Merge tag 'drm-intel-fixes-2013-10-21' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Just an lvds clock gating fix and a pte clearing hack for hsw to avoid memory corruption when hibernating - something doesn't seem to switch off properly, we're still investigating. * tag 'drm-intel-fixes-2013-10-21' of git://people.freedesktop.org/~danvet/drm-intel: (96 commits) drm/i915: Disable GGTT PTEs on GEN6+ suspend drm/i915: Make PTE valid encoding optional drm/i915: disable LVDS clock gating on CPT v2
-
由 Neal Cardwell 提交于
For passive TCP connections, upon receiving the ACK that completes the 3WHS, make sure we set our pacing rate after we get our first RTT sample. On passive TCP connections, when we receive the ACK completing the 3WHS we do not take an RTT sample in tcp_ack(), but rather in tcp_synack_rtt_meas(). So upon receiving the ACK that completes the 3WHS, tcp_ack() leaves sk_pacing_rate at its initial value. Originally the initial sk_pacing_rate value was 0, so passive-side connections defaulted to sysctl_tcp_min_tso_segs (2 segs) in skbuffs made in the first RTT. With a default initial cwnd of 10 packets, this happened to be correct for RTTs 5ms or bigger, so it was hard to see problems in WAN or emulated WAN testing. Since 7eec4174 ("pkt_sched: fq: fix non TCP flows pacing"), the initial sk_pacing_rate is 0xffffffff. So after that change, passive TCP connections were keeping this value (and using large numbers of segments per skbuff) until receiving an ACK for data. Signed-off-by: NNeal Cardwell <ncardwell@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mariusz Ceier 提交于
When IFF_ALLMULTI flag is set on interface and IFF_PROMISC isn't, emac_dev_mcast_set should only enable RX of multicasts and reset MACHASH registers. It does this, but afterwards it either sets up multicast MACs filtering or disables RX of multicasts and resets MACHASH registers again, rendering IFF_ALLMULTI flag useless. This patch fixes emac_dev_mcast_set, so that multicast MACs filtering and disabling of RX of multicasts are skipped when IFF_ALLMULTI flag is set. Tested with kernel 2.6.37. Signed-off-by: NMariusz Ceier <mceier+kernel@gmail.com> Acked-by: NMugunthan V N <mugunthanvnm@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexandre Belloni 提交于
This has no other impact than a cosmetic one. Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
Routes need to be probed asynchronous otherwise the call stack gets exhausted when the kernel attemps to deliver another skb inline, like e.g. xt_TEE does, and we probe at the same time. We update neigh->updated still at once, otherwise we would send to many probes. Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Julian Anastasov says: ==================== ipv6: use rt6i_gateway as nexthop The following patchset makes sure that rt6i_gateway contains valid nexthop information in all cases, so that we can use different nexthop for sending. The first patch is a simple fix that makes IPVS, TEE, RAW(hdrincl) and RTF_DYNAMIC(without RTF_GATEWAY) work as before 3.9. There is a single corner case not solved by this patch: RAW(hdrincl) or TEE using local address for nexthop, a silly feature, I guess. In this case we see zeroes in rt6i_gateway because we get route that is not cloned. This is solved only with patch 2. The second patch is an optimization that makes sure all resulting routes have rt6i_gateway filled, so that we can avoid the complex ipv6_addr_any() call added to rt6_nexthop() by patch 1. And it sets rt6i_gateway for local routes, a case not handled by patch 1. The third patch uses the new rt6_nexthop() function to fix the matching of gateways in the same way as commit bbb5823c ("netfilter: nf_conntrack: fix rt_gateway checks for H.323 helper") fixes nf_conntrack_h323_main.c for IPv4. Currently, it depends on the new definition of rt6_nexthop() in patch 2. Actually, if patch 2 is applied, patch 3 becomes a cosmetic change. I see the following two alternatives for applying these patches: 1. Linger patch 2 in net-next to avoid surprises in the upcoming release. In this case patch 3 can be reworked not to depend on the new rt6_nexthop() definition in patch 2. I guess this is a better option, so that patch 2 can be reviewed and tested for longer time. 2. Include all 3 patches in net tree - more risky because this is my first attempt to change IPv6. Here is the situation as handled by patch 2: In IPv6 the resolved routes are always host routes (/128 with DST_HOST), mostly cloned ones. We allow routes in FIB to contain rt6i_gateway with zeroes (eg. for local subnets) but on cloning we can fill the rt6i_gateway field in result. This works even without this patchset. There is a single special case where dst is provided as skb_dst directly without a routing call: icmp6_dst_alloc(). It is a private dst allocated just for the particular ICMP packet. Patch 2 fills rt6i_gateway in this case, needed for the new rt6_nexthop() simplification. The last case is addrconf_dst_alloc(), it can put in FIB local/anycast routes when addresses are added. Patch 2 needs to fill rt6i_gateway in this case because such routes are returned without cloning. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Anastasov 提交于
Now when rt6_nexthop() can return nexthop address we can use it for proper nexthop comparison of directly connected destinations. For more information refer to commit bbb5823c ("netfilter: nf_conntrack: fix rt_gateway checks for H.323 helper"). Signed-off-by: NJulian Anastasov <ja@ssi.bg> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Anastasov 提交于
Make sure rt6i_gateway contains nexthop information in all routes returned from lookup or when routes are directly attached to skb for generated ICMP packets. The effect of this patch should be a faster version of rt6_nexthop() and the consideration of local addresses as nexthop. Signed-off-by: NJulian Anastasov <ja@ssi.bg> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Anastasov 提交于
In v3.9 6fd6ce20 ("ipv6: Do not depend on rt->n in ip6_finish_output2()." changed the behaviour of ip6_finish_output2() such that the recently introduced rt6_nexthop() is used instead of an assigned neighbor. As rt6_nexthop() prefers rt6i_gateway only for gatewayed routes this causes a problem for users like IPVS, xt_TEE and RAW(hdrincl) if they want to use different address for routing compared to the destination address. Another case is when redirect can create RTF_DYNAMIC route without RTF_GATEWAY flag, we ignore the rt6i_gateway in rt6_nexthop(). Fix the above problems by considering the rt6i_gateway if present, so that traffic routed to address on local subnet is not wrongly diverted to the destination address. Thanks to Simon Horman and Phil Oester for spotting the problematic commit. Thanks to Hannes Frederic Sowa for his review and help in testing. Reported-by: NPhil Oester <kernel@linuxace.com> Reported-by: NMark Brooks <mark@loadbalancer.org> Signed-off-by: NJulian Anastasov <ja@ssi.bg> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Yuval Mintz says: ==================== bnx2x: Bug fixes patch series This patch series contains fixes for various flows - several SR-IOV issues are fixed, ethtool callbacks (coalescing and register dump) are corrected, null pointer dereference on error flows is prevented, etc. Changes from V1 --------------- - Patch 2 "bnx2x: Prevent an illegal pointer dereference during panic" is revised, with improved handling of edge cases. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Merav Sicron 提交于
Current driver implementation incorrectly sets the flag only if 64-bit DMA mask succeeded. Signed-off-by: NMerav Sicron <meravs@broadcom.com> Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Kravkov 提交于
As part of a register dump, the interface pretends to have the identity of other interfaces of the same physical device in order to perform HW configuration for them - specifically, it needs to prevent attentions from generating on those functions as the register dump accesses registers in common blocks which whose reading might generate an attention. However, such pretension is unsafe - unlike other flows in which the driver uses pretend, during register dump there is no guarantee no other HW access will take place (by other flows). If such access will take place, the HW will be accessed by the wrong interface, and leave both functions in an incorrect state. This patch removes all pretensions from the register dump flow. Instead, it changes initial configuration of attentions such that no fatal attention will be generated for other functions as a result of the register dump (notice however, a debug print claiming an attention from other functions IS possible during the register dump) Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ariel Elior 提交于
bnx2x has several clients to its DMAE machines - all of them with the exception of the statistics flow used the same locking mechanisms to synchronize the DMAE machines' usage. Since statistics (which are periodically entered) use DMAE without taking the locks, they may erase the commands which were previously set - e.g., it may cause a VF to timeout while waiting for a PF answer on the VF-PF channel as that command header would have been overwritten by the statistics' header. This patch makes certain that all flows utilizing DMAE will use the same API, assuring that the locking scheme will be kept by all said flows. Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
If debug message is open and bnx2x_vfop_qdtor_cmd() were to fail, the resulting print would have caused a null pointer dereference. Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ariel Elior 提交于
Starting with commit b9871bcf "bnx2x: VF RSS support - PF side", if a PF will have SR-IOV supported in its PCI configuration space, storage drivers will not work for that interface. This patch fixes the resource calculation to allow such a configuration to properly work. Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Kravkov 提交于
bnx2x drivers configure coalescing incorrectly (e.g., as a result of a call to 'ethtool -c'). Although this is almost invisible to the user (due to NAPI) designated tests will show the configuration is incorrect. Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ariel Elior 提交于
Current code returns upon failure, leaving the VF-PF in an unusable state; This patch adds the missing release so further commands could pass between PF and VF. Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
During a panic, the driver tries to print the Management FW buffer of recent commands. To do so, the driver reads the address of that buffer from a known address. If the buffer is unavailable (e.g., PCI reads don't work, MCP is failing, etc.), the driver will try to access the address it has read, possibly causing a kernel panic. This check 'sanitizes' the access, validating the read value is indeed a valid address inside the management FW's buffers. The patch also removes a read outside the scope of the buffer, which resulted in some unrelated chraracters appearing in the log. Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
bnx2x VFs do not support Multi-CoS; Current implementation erroneously sets the VFs maximal number of CoS to be > 1. This will cause the driver to call alloc_etherdev_mqs() with a number of queues it cannot possibly support and reflects in 'odd' driver prints. Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mugunthan V N 提交于
When interrupt pacing is enabled, receive/transmit statistics are not updated properly by hardware which leads to ISR return with IRQ_NONE and inturn kernel disables the interrupt. This patch removed the checking of receive/transmit statistics from ISR. This patch is verified with AM335x Beagle Bone Black and below is the kernel warn when interrupt pacing is enabled. [ 104.298254] irq 58: nobody cared (try booting with the "irqpoll" option) [ 104.305356] CPU: 0 PID: 1073 Comm: iperf Not tainted 3.12.0-rc3-00342-g77d4015b #3 [ 104.313284] [<c001bb84>] (unwind_backtrace+0x0/0xf0) from [<c0017db0>] (show_stack+0x10/0x14) [ 104.322282] [<c0017db0>] (show_stack+0x10/0x14) from [<c0507920>] (dump_stack+0x78/0x94) [ 104.330816] [<c0507920>] (dump_stack+0x78/0x94) from [<c0088c1c>] (__report_bad_irq+0x20/0xc0) [ 104.339889] [<c0088c1c>] (__report_bad_irq+0x20/0xc0) from [<c008912c>] (note_interrupt+0x1dc/0x23c) [ 104.349505] [<c008912c>] (note_interrupt+0x1dc/0x23c) from [<c0086d74>] (handle_irq_event_percpu+0xc4/0x238) [ 104.359851] [<c0086d74>] (handle_irq_event_percpu+0xc4/0x238) from [<c0086f24>] (handle_irq_event+0x3c/0x5c) [ 104.370198] [<c0086f24>] (handle_irq_event+0x3c/0x5c) from [<c008991c>] (handle_level_irq+0xac/0x10c) [ 104.379907] [<c008991c>] (handle_level_irq+0xac/0x10c) from [<c00866d8>] (generic_handle_irq+0x20/0x30) [ 104.389812] [<c00866d8>] (generic_handle_irq+0x20/0x30) from [<c0014ce8>] (handle_IRQ+0x4c/0xb0) [ 104.399066] [<c0014ce8>] (handle_IRQ+0x4c/0xb0) from [<c000856c>] (omap3_intc_handle_irq+0x60/0x74) [ 104.408598] [<c000856c>] (omap3_intc_handle_irq+0x60/0x74) from [<c050d8e4>] (__irq_svc+0x44/0x5c) [ 104.418021] Exception stack(0xde4f7c00 to 0xde4f7c48) [ 104.423345] 7c00: 00000001 00000000 00000000 dd002140 60000013 de006e54 00000002 00000000 [ 104.431952] 7c20: de345748 00000040 c11c8588 00018ee0 00000000 de4f7c48 c009dfc8 c050d300 [ 104.440553] 7c40: 60000013 ffffffff [ 104.444237] [<c050d8e4>] (__irq_svc+0x44/0x5c) from [<c050d300>] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 104.454220] [<c050d300>] (_raw_spin_unlock_irqrestore+0x34/0x44) from [<c00868c0>] (__irq_put_desc_unlock+0x14/0x38) [ 104.465295] [<c00868c0>] (__irq_put_desc_unlock+0x14/0x38) from [<c0088068>] (enable_irq+0x4c/0x74) [ 104.474829] [<c0088068>] (enable_irq+0x4c/0x74) from [<c03abd24>] (cpsw_poll+0xb8/0xdc) [ 104.483276] [<c03abd24>] (cpsw_poll+0xb8/0xdc) from [<c044ef68>] (net_rx_action+0xc0/0x1e8) [ 104.492085] [<c044ef68>] (net_rx_action+0xc0/0x1e8) from [<c0048a90>] (__do_softirq+0x100/0x27c) [ 104.501338] [<c0048a90>] (__do_softirq+0x100/0x27c) from [<c0048cd0>] (do_softirq+0x68/0x70) [ 104.510224] [<c0048cd0>] (do_softirq+0x68/0x70) from [<c0048e8c>] (local_bh_enable+0xd0/0xe4) [ 104.519211] [<c0048e8c>] (local_bh_enable+0xd0/0xe4) from [<c048c774>] (tcp_rcv_established+0x450/0x648) [ 104.529201] [<c048c774>] (tcp_rcv_established+0x450/0x648) from [<c0494904>] (tcp_v4_do_rcv+0x154/0x474) [ 104.539195] [<c0494904>] (tcp_v4_do_rcv+0x154/0x474) from [<c043d750>] (release_sock+0xac/0x1ac) [ 104.548448] [<c043d750>] (release_sock+0xac/0x1ac) from [<c04844e8>] (tcp_recvmsg+0x4d0/0xa8c) [ 104.557528] [<c04844e8>] (tcp_recvmsg+0x4d0/0xa8c) from [<c04a8720>] (inet_recvmsg+0xcc/0xf0) [ 104.566507] [<c04a8720>] (inet_recvmsg+0xcc/0xf0) from [<c0439744>] (sock_recvmsg+0x90/0xb0) [ 104.575394] [<c0439744>] (sock_recvmsg+0x90/0xb0) from [<c043b778>] (SyS_recvfrom+0x88/0xd8) [ 104.584280] [<c043b778>] (SyS_recvfrom+0x88/0xd8) from [<c043b7e0>] (sys_recv+0x18/0x20) [ 104.592805] [<c043b7e0>] (sys_recv+0x18/0x20) from [<c0013da0>] (ret_fast_syscall+0x0/0x48) [ 104.601587] handlers: [ 104.603992] [<c03acd94>] cpsw_interrupt [ 104.608040] Disabling IRQ #58 Cc: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 10月, 2013 2 次提交
-
-
由 David Herrmann 提交于
The LEGO-wiimote uses a different VID than the Nintendo ID. The device is technically the same so add the ID. Cc: <stable@vger.kernel.org> # 3.11+ Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parsic fixes from Helge Deller: "There are just two small fixes in here: - Revert a commit which exported the flush_cache_page function. This was noticed by Christoph Hellwig. - Enable the DEVTMPFS, DEVTMPFS_MOUNT and BLK_DEV_INITRD config options in the parisc defconfigs so that latest udev/initrd finds the root disk at boot" * 'parisc-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: enable DEVTMPFS, DEVTMPFS_MOUNT and BLK_DEV_INITRD in defconfigs Revert "parisc: Export flush_cache_page() (needed by lustre)"
-
- 20 10月, 2013 4 次提交
-
-
由 David S. Miller 提交于
Jiri Pirko says: ==================== UFO fixes Couple of patches fixing UFO functionality in different situations. v1->v2: - minor if{}else{} coding style adjustment suggested by Sergei Shtylyov ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Now, if user application does: sendto len<mtu flag MSG_MORE sendto len>mtu flag 0 The skb is not treated as fragmented one because it is not initialized that way. So move the initialization to fix this. introduced by: commit e89e9cf5 "[IPv4/IPv6]: UFO Scatter-gather approach" Signed-off-by: NJiri Pirko <jiri@resnulli.us> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Now, if user application does: sendto len<mtu flag MSG_MORE sendto len>mtu flag 0 The skb is not treated as fragmented one because it is not initialized that way. So move the initialization to fix this. introduced by: commit e89e9cf5 "[IPv4/IPv6]: UFO Scatter-gather approach" Signed-off-by: NJiri Pirko <jiri@resnulli.us> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
if up->pending != 0 dontfrag is left with default value -1. That causes that application that do: sendto len>mtu flag MSG_MORE sendto len>mtu flag 0 will receive EMSGSIZE errno as the result of the second sendto. This patch fixes it by respecting IPV6_DONTFRAG socket option. introduced by: commit 4b340ae2 "IPv6: Complete IPV6_DONTFRAG support" Signed-off-by: NJiri Pirko <jiri@resnulli.us> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-