1. 12 5月, 2013 20 次提交
    • G
      net/ethernet: ARM_AT91_ETHER should depend on HAS_DMA · d914ae80
      Geert Uytterhoeven 提交于
      If NO_DMA=y:
      
      drivers/built-in.o: In function `at91ether_start':
      drivers/net/ethernet/cadence/at91_ether.c:49: undefined reference to `dma_alloc_coherent'
      drivers/net/ethernet/cadence/at91_ether.c:60: undefined reference to `dma_free_coherent'
      drivers/built-in.o: In function `at91ether_interrupt':
      drivers/net/ethernet/cadence/at91_ether.c:250: undefined reference to `dma_unmap_single'
      drivers/built-in.o: In function `at91ether_start_xmit':
      drivers/net/ethernet/cadence/at91_ether.c:169: undefined reference to `dma_map_single'
      drivers/built-in.o: In function `at91ether_close':
      drivers/net/ethernet/cadence/at91_ether.c:145: undefined reference to `dma_free_coherent'
      Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
      Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
      Cc: David S. Miller <davem@davemloft.net>
      Cc: netdev@vger.kernel.org
      Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d914ae80
    • G
      net/wireless: ATH9K should depend on HAS_DMA · 4837ef42
      Geert Uytterhoeven 提交于
      If NO_DMA=y:
      
      drivers/built-in.o: In function `ath9k_beacon_generate':
      drivers/net/wireless/ath/ath9k/beacon.c:146: undefined reference to `dma_unmap_single'
      drivers/net/wireless/ath/ath9k/beacon.c:174: undefined reference to `dma_map_single'
      drivers/net/wireless/ath/ath9k/beacon.c:176: undefined reference to `dma_mapping_error'
      drivers/built-in.o: In function `ath9k_beacon_remove_slot':
      drivers/net/wireless/ath/ath9k/beacon.c:252: undefined reference to `dma_unmap_single'
      drivers/built-in.o: In function `ath_descdma_setup':
      drivers/net/wireless/ath/ath9k/init.c:382: undefined reference to `dmam_alloc_coherent'
      drivers/built-in.o: In function `ath_edma_get_buffers':
      drivers/net/wireless/ath/ath9k/recv.c:616: undefined reference to `dma_sync_single_for_cpu'
      drivers/built-in.o: In function `ath_get_next_rx_buf':
      drivers/net/wireless/ath/ath9k/recv.c:740: undefined reference to `dma_sync_single_for_cpu'
      drivers/built-in.o: In function `ath_rx_edma_cleanup':
      drivers/net/wireless/ath/ath9k/recv.c:176: undefined reference to `dma_unmap_single'
      drivers/built-in.o: In function `ath_rx_cleanup':
      drivers/net/wireless/ath/ath9k/recv.c:340: undefined reference to `dma_unmap_single'
      drivers/built-in.o: In function `ath_rx_edma_buf_link':
      drivers/net/wireless/ath/ath9k/recv.c:122: undefined reference to `dma_sync_single_for_cpu'
      drivers/built-in.o: In function `ath_rx_tasklet':
      drivers/net/wireless/ath/ath9k/recv.c:1275: undefined reference to `dma_map_single'
      drivers/net/wireless/ath/ath9k/recv.c:1277: undefined reference to `dma_mapping_error'
      drivers/net/wireless/ath/ath9k/recv.c:1283: undefined reference to `dma_unmap_single'
      drivers/built-in.o: In function `ath_rx_edma_init':
      drivers/net/wireless/ath/ath9k/recv.c:226: undefined reference to `dma_map_single'
      drivers/net/wireless/ath/ath9k/recv.c:229: undefined reference to `dma_mapping_error'
      drivers/built-in.o: In function `ath_rx_init':
      drivers/net/wireless/ath/ath9k/recv.c:303: undefined reference to `dma_map_single'
      drivers/net/wireless/ath/ath9k/recv.c:306: undefined reference to `dma_mapping_error'
      drivers/built-in.o: In function `ath_tx_complete_buf':
      drivers/net/wireless/ath/ath9k/xmit.c:2088: undefined reference to `dma_unmap_single'
      drivers/built-in.o: In function `ath_txstatus_setup':
      drivers/net/wireless/ath/ath9k/xmit.c:2344: undefined reference to `dmam_alloc_coherent'
      drivers/built-in.o: In function `ath_tx_set_retry':
      drivers/net/wireless/ath/ath9k/xmit.c:307: undefined reference to `dma_sync_single_for_cpu'
      drivers/built-in.o: In function `ath_tx_setup_buffer':
      drivers/net/wireless/ath/ath9k/xmit.c:1887: undefined reference to `dma_map_single'
      drivers/net/wireless/ath/ath9k/xmit.c:1889: undefined reference to `dma_mapping_error'
      Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
      Cc: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
      Cc: John W. Linville <linville@tuxdriver.com>
      Cc: linux-wireless@vger.kernel.org
      Cc: netdev@vger.kernel.org
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4837ef42
    • G
      net/ethernet: STMMAC_ETH should depend on HAS_DMA · fd1eb9e6
      Geert Uytterhoeven 提交于
      If NO_DMA=y:
      
      drivers/built-in.o: In function `dma_free_tx_skbufs':
      drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1141: undefined reference to `dma_unmap_single'
      drivers/built-in.o: In function `dma_free_rx_skbufs':
      drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1120: undefined reference to `dma_unmap_single'
      drivers/built-in.o: In function `free_dma_desc_resources':
      drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1159: undefined reference to `dma_free_coherent'
      drivers/built-in.o: In function `stmmac_init_rx_buffers':
      drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:980: undefined reference to `dma_map_single'
      drivers/built-in.o: In function `init_dma_desc_rings':
      drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1015: undefined reference to `dma_alloc_coherent'
      drivers/built-in.o: In function `stmmac_tx_clean':
      drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1250: undefined reference to `dma_unmap_single'
      drivers/built-in.o: In function `stmmac_rx':
      drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2044: undefined reference to `dma_unmap_single'
      drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2082: undefined reference to `dma_unmap_single'
      drivers/built-in.o: In function `stmmac_rx_refill':
      drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1967: undefined reference to `dma_map_single'
      drivers/built-in.o: In function `stmmac_xmit':
      drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1845: undefined reference to `dma_map_single'
      drivers/built-in.o: In function `skb_frag_dma_map':
      include/linux/skbuff.h:2184: undefined reference to `dma_map_page'
      drivers/built-in.o: In function `stmmac_jumbo_frm':
      drivers/net/ethernet/stmicro/stmmac/ring_mode.c:40: undefined reference to `dma_map_single'
      drivers/built-in.o: In function `stmmac_jumbo_frm':
      drivers/net/ethernet/stmicro/stmmac/chain_mode.c:48: undefined reference to `dma_map_single'
      drivers/net/ethernet/stmicro/stmmac/chain_mode.c:55: undefined reference to `dma_map_single'
      Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
      Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
      Cc: David S. Miller <davem@davemloft.net>
      Cc: netdev@vger.kernel.org
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      fd1eb9e6
    • G
      net/ethernet: NET_CALXEDA_XGMAC should depend on HAS_DMA · 3b76b3c3
      Geert Uytterhoeven 提交于
      If NO_DMA=y:
      
      drivers/built-in.o: In function `xgmac_xmit':
      drivers/net/ethernet/calxeda/xgmac.c:1102: undefined reference to `dma_mapping_error'
      Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
      Cc: Rob Herring <rob.herring@calxeda.com>
      Cc: David S. Miller <davem@davemloft.net>
      Cc: netdev@vger.kernel.org
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3b76b3c3
    • E
      ipv6: do not clear pinet6 field · f77d6021
      Eric Dumazet 提交于
      We have seen multiple NULL dereferences in __inet6_lookup_established()
      
      After analysis, I found that inet6_sk() could be NULL while the
      check for sk_family == AF_INET6 was true.
      
      Bug was added in linux-2.6.29 when RCU lookups were introduced in UDP
      and TCP stacks.
      
      Once an IPv6 socket, using SLAB_DESTROY_BY_RCU is inserted in a hash
      table, we no longer can clear pinet6 field.
      
      This patch extends logic used in commit fcbdf09d
      ("net: fix nulls list corruptions in sk_prot_alloc")
      
      TCP/UDP/UDPLite IPv6 protocols provide their own .clear_sk() method
      to make sure we do not clear pinet6 field.
      
      At socket clone phase, we do not really care, as cloning the parent (non
      NULL) pinet6 is not adding a fatal race.
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f77d6021
    • J
      macvlan: fix passthru mode race between dev removal and rx path · 233c7df0
      Jiri Pirko 提交于
      Currently, if macvlan in passthru mode is created and data are rxed and
      you remove this device, following panic happens:
      
      NULL pointer dereference at 0000000000000198
      IP: [<ffffffffa0196058>] macvlan_handle_frame+0x153/0x1f7 [macvlan]
      
      I'm using following script to trigger this:
      <script>
      while [ 1 ]
      do
      	ip link add link e1 name macvtap0 type macvtap mode passthru
      	ip link set e1 up
      	ip link set macvtap0 up
      	IFINDEX=`ip link |grep macvtap0 | cut -f 1 -d ':'`
      	cat /dev/tap$IFINDEX  >/dev/null &
      	ip link del dev macvtap0
      done
      </script>
      
      I run this script while "ping -f" is running on another machine to send
      packets to e1 rx.
      
      Reason of the panic is that list_first_entry() is blindly called in
      macvlan_handle_frame() even if the list was empty. vlan is set to
      incorrect pointer which leads to the crash.
      
      I'm fixing this by protecting port->vlans list by rcu and by preventing
      from getting incorrect pointer in case the list is empty.
      
      Introduced by: commit eb06acdc "macvlan: Introduce 'passthru' mode to takeover the underlying device"
      Signed-off-by: NJiri Pirko <jiri@resnulli.us>
      Acked-by: NEric Dumazet <edumazet@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      233c7df0
    • D
      Merge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-merge · fb863b8b
      David S. Miller 提交于
      Included changes:
      - fix parsing of user typed protocol string to avoid random memory access in
        some cases
      - check pskb_trim_rcsum() return value
      - prevent DAT from sending ARP replies when not needed
      - reorder the main clean up routine to prevent race conditions
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      fb863b8b
    • D
      ipv4: ip_output: remove inline marking of EXPORT_SYMBOL functions · 2fbd9679
      Denis Efremov 提交于
      EXPORT_SYMBOL and inline directives are contradictory to each other.
      The patch fixes this inconsistency.
      
      Found by Linux Driver Verification project (linuxtesting.org).
      Signed-off-by: NDenis Efremov <yefremov.denis@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      2fbd9679
    • R
      net/mlx4: Strengthen VLAN tags/priorities enforcement in VST mode · 7677fc96
      Rony Efraim 提交于
      Make sure that the following steps are taken:
      
      - drop packets sent by the VF with vlan tag
      - block packets with vlan tag which are steered to the VF
      - drop/block tagged packets when the policy is priority-tagged
      - make sure VLAN stripping for received packets is set
      - make sure force UP bit for the VF QP is set
      
      Use enum values for all the above instead of numerical bit offsets.
      Signed-off-by: NRony Efraim <ronye@mellanox.com>
      Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7677fc96
    • O
      net/mlx4_core: Add missing report on VST and spoof-checking dev caps · 4e8cf5b8
      Or Gerlitz 提交于
      Commits e6b6a231 "net/mlx4: Add VF MAC spoof checking support" and
      3f7fb021 "net/mlx4: Add set VF default vlan ID and priority support"
      missed reporting in the device capabilities dump when these features
      are actually supported. Also two too noisy debug messages which produce
      message on every QP opened by a VF, were left in the code, fix that.
      Signed-off-by: NRony Efraim <ronye@mellanox.com>
      Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4e8cf5b8
    • S
      net: fec: enable hardware checksum only on imx6q-fec · 48496255
      Shawn Guo 提交于
      Commit 4c09eed9 (net: fec: Enable imx6 enet checksum acceleration.)
      enables hardware checksum acceleration unconditionally for all fec
      variants.  This is inappropriate, because some variants like imx5 have
      no such support on hardware.  Consequently, fec is broken on these
      platforms.  Fix it by enabling hardware checksum only on imx6q-fec type
      of controllers.
      Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
      Reviewed-by: NJim Baxter <jim_baxter@mentor.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      48496255
    • D
      Merge branch 'qlcnic' · 1e9e9901
      David S. Miller 提交于
      Shahed Shaikh says:
      
      ====================
      This patch series has following bug fixes:
      * Fix a bug in unicast MAC address setting in adapter.
        Driver was not deleting older unicast MAC while adding new one.
      * Fix an ethtool stats string array by adding missing string entry
        and fix a typo.
      * Fix module paramter description. Bracket ')' was missing.
      * Fix port status provided though 'ethtool <device>' for 83xx adapter.
      * Fix reset recovery path in case of transmit timeout.
      * Fix reset recovery during diagnostic tests by preserving
        current device status information.
      * Fix mailbox response handling. Driver was not maintaining poll time properly.
      * Fix validation of link event command.
      ====================
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      1e9e9901
    • R
      qlcnic: Fix validation of link event command. · cbccb18f
      Rajesh Borundia 提交于
      o VF driver that has enabled asynchronous link events
        may not set BIT_8 in the request, if it does not require
        link state in the response.
      Signed-off-by: NPratik Pujar <pratik.pujar@qlogic.com>
      Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com>
      Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      cbccb18f
    • R
      qlcnic: Fix mailbox response handling. · 9106e5db
      Rajesh Borundia 提交于
      o Fix mailbox response poll time to maximum 5 seconds which
        includes mailbox response time as well as time required for
        processing AEN if any.
      o Driver need to read firmware control mailbox register instead
        of host control mailbox register.
      Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com>
      Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com>
      Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      9106e5db
    • M
      qlcnic: Fix bug in diagnostics test reset recovery path · 13a82b44
      Manish Chopra 提交于
      o In order to perform reset recovery during diagnostics tests,
        current device status information need to be preserved.
        This patch makes the required changes in diagnostics routines
      Signed-off-by: NManish Chopra <manish.chopra@qlogic.com>
      Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      13a82b44
    • S
      qlcnic: Fix reset recovery after transmit timeout · 536faa61
      Sony Chacko 提交于
      o When transmit timeout happens, recovery attempt should start with
        adapter soft reset. If soft reset fails to resume traffic, firmware
        dump will be collected and driver will perform a hard reset of the
        adapter. Reset recovery on 83xx was failing after a hard reset.
        This patch fixes that issue.
      Signed-off-by: NSony Chacko <sony.chacko@qlogic.com>
      Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      536faa61
    • H
      qlcnic: Fix ethtool supported port status for 83xx · b938662d
      Himanshu Madhani 提交于
      o Fix display for interface while using 'ethtool <device>' for 83xx adapter
      Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com>
      Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b938662d
    • H
    • S
      qlcnic: Fix ethtool strings · 8c046410
      Shahed Shaikh 提交于
      o Add missing information in ethtool statistics information array.
      o Fix  the typo in the statistics information string.
      Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8c046410
    • M
      qlcnic: Fix setting MAC address · cffe52f3
      Manish Chopra 提交于
      o Delete previous unicast MAC which is already programmed
        in adapter before setting new unicast MAC
      Signed-off-by: NManish Chopra <manish.chopra@qlogic.com>
      Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      cffe52f3
  2. 11 5月, 2013 1 次提交
    • D
      Merge branch 'wireless' · 61f15982
      David S. Miller 提交于
      John W. Linville says:
      
      ====================
      Here is a batch of fixes intended for the 3.10 stream.
      
      Amitkumar Karwar provides an mwifiex fix to plug a memory leak when
      the driver is unloaded.
      
      Bing Zhao brings an mwifiex fix for some flag handling that leads to
      log spam and an unusable interface.
      
      Daniel Drake offers an mwifiex fix for multicast filter setup, to
      correctly implement wakeup behaviour for multicast WOL.
      
      Felix Fietkau fixes an ath9k problem that produces logspam and keycache
      errors due to a bad return code.
      
      Stanislaw Gruszka produces an fix for a WARNING from ath5k, and an
      iwl4965 workaround to stop advertising a feature that doesn't work with
      the current mac80211 implementation.
      
      Sujith Manoharan gives us an ath9k fix to reprogram the HW beacon timers
      after a TSF update, and an initvals fix for the AR9565 device.
      
      Thommy Jakobsson fixes an rx descriptor underrun on b43.
      ====================
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      61f15982
  3. 10 5月, 2013 19 次提交
    • J
      Merge branch 'master' of... · 4f81d715
      John W. Linville 提交于
      Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
      4f81d715
    • L
      Merge tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux · 70eba422
      Linus Torvalds 提交于
      Pull trivial pstore update from Tony Luck:
       "Couple of pstore cleanups"
      
      It turns out that the kmemdup() conversion ends up being undone by the
      fact that the memory block also needed the ecc information (see commit
      bd08ec33: "pstore/ram: Restore ecc information block"), so all that
      remains after merging is the error return code change.
      
      * tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
        pstore/ram: fix error return code in ramoops_probe()
        fs: pstore: Replaced calls to kmalloc and memcpy with kmemdup
      70eba422
    • L
      Merge git://git.infradead.org/users/willy/linux-nvme · 2d4fe278
      Linus Torvalds 提交于
      Pull NVMe driver update from Matthew Wilcox:
       "Lots of exciting new features in the NVM Express driver this time,
        including support for emulating SCSI commands, discard support and the
        ability to submit per-sector metadata with I/Os.
      
        It's still mostly bugfixes though!"
      
      * git://git.infradead.org/users/willy/linux-nvme: (27 commits)
        NVMe: Use user defined admin ioctl timeout
        NVMe: Simplify Firmware Activate code slightly
        NVMe: Only clear the enable bit when disabling controller
        NVMe: Wait for device to acknowledge shutdown
        NVMe: Schedule timeout for sync commands
        NVMe: Meta-data support in NVME_IOCTL_SUBMIT_IO
        NVMe: Device specific stripe size handling
        NVMe: Split non-mergeable bio requests
        NVMe: Remove dead code in nvme_dev_add
        NVMe: Check for NULL memory in nvme_dev_add
        NVMe: Fix error clean-up on nvme_alloc_queue
        NVMe: Free admin queue on request_irq error
        NVMe: Add scsi unmap to SG_IO
        NVMe: queue usage fixes in nvme-scsi
        NVMe: Set TASK_INTERRUPTIBLE before processing queues
        NVMe: Add a character device for each nvme device
        NVMe: Fix endian-related problems in user I/O submission path
        NVMe: Fix I/O cancellation status on big-endian machines
        NVMe: Fix sparse warnings in scsi emulation
        NVMe: Don't fail initialisation unnecessarily
        ...
      2d4fe278
    • L
      Merge tag 'acpi-fixes-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm · 2e99f3a1
      Linus Torvalds 提交于
      Pull ACPICA fixes from Rafael Wysocki:
      
       - _INI regression fix from Tomasz Nowicki.
      
       - Fix for a possible memory leak in _OSI support routine from Jung-uk
         Kim.
      
       - Fix for a possible buffer overflow during field unit read operation
         from Bob Moore.
      
      * tag 'acpi-fixes-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
        ACPICA: ACPICA: Fix for _INI regression
        ACPICA: _OSI support: Fix possible memory leak
        ACPICA: Fix possible buffer overflow during a field unit read operation
      2e99f3a1
    • L
      Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · fc72053b
      Linus Torvalds 提交于
      Pull ARM SoC fixes and straggler patches from Olof Johansson:
       "A collection of fixes for fall out from 3.10 merge window, some build
        fixes and warning cleanups and a small handful of patches that were
        small and contained and made sense to still include in 3.10 (some of
        these have also been in -next since the merge window opened).
      
        Largest continous series is for OMAP, but there's a handful for other
        platforms.
      
        For i.MX, one of the patches are framebuffer fixups due to fallout
        during the merge window, and the other removes some stale and broken
        code."
      
      * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits)
        ARM: exynos: dts: Fixed vbus-gpios
        ARM: EXYNOS5: Fix kernel dump in AFTR idle mode
        ARM: ux500: Rid ignored return value of regulator_enable() compiler warning
        ARM: ux500: read the correct soc_id number
        ARM: exynos: dts: cros5250: add cyapa trackpad
        video: mxsfb: Adapt to new videomode API
        ARM: imx: Select GENERIC_ALLOCATOR
        ARM: imx: compile fix for hotplug.c
        ARM: dts: don't assume boards are using twl4030 for omap3
        ARM: OMAP2+: Remove bogus IS_ERR_OR_NULL checking from id.c
        ARM: dts: Configure and fix the McSPI pins for 4430sdp
        ARM: dts: AM33XX: Add GPMC node
        ARM: dts: OMAP4460: Fix CPU OPP voltages
        ARM: dts: OMAP36xx: Fix CPU OPP voltages
        ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module
        ARM: OMAP2: AM33XX: id: Add support for new AM335x PG2.1 Si
        omap: mux: add AM/DM37x gpios
        ARM: OMAP1: DMA: fix error handling in omap1_system_dma_init()
        ARM: OMAP2+: omap_device: use late_initcall_sync
        ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices
        ...
      fc72053b
    • L
      Merge tag 'xtensa-next-20130508' of git://github.com/czankel/xtensa-linux · c61c48df
      Linus Torvalds 提交于
      Pull xtensa updates from Chris Zankel:
       "Support for the latest MMU architecture that allows for a larger
        accessible memory region, and various bug-fixes"
      
      * tag 'xtensa-next-20130508' of git://github.com/czankel/xtensa-linux:
        xtensa: Switch to asm-generic/linkage.h
        xtensa: fix redboot load address
        xtensa: ISS: fix timer_lock usage in rs_open
        xtensa: disable IRQs while IRQ handler is running
        xtensa: enable lockdep support
        xtensa: fix arch_irqs_disabled_flags implementation
        xtensa: add irq flags trace support
        xtensa: provide custom CALLER_ADDR* implementations
        xtensa: add stacktrace support
        xtensa: clean up stpill_registers
        xtensa: don't use a7 in simcalls
        xtensa: don't attempt to use unconfigured timers
        xtensa: provide default platform_pcibios_init implementation
        xtensa: remove KCORE_ELF again
        xtensa: document MMUv3 setup sequence
        xtensa: add MMU v3 support
        xtensa: fix ibreakenable register update
        xtensa: fix oprofile building as module
      c61c48df
    • L
      Merge tag 'arc-v3.10-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc · e30f4192
      Linus Torvalds 提交于
      Pull ARC port updates from Vineet Gupta:
       "Support for two new platforms based on ARC700:
         - Abilis TB10x SoC [Chritisian/Pierrick]
         - Simulator only System-C Model [Mischa]
      
        ARC specific MM improvements:
         - Avoid full TLB flush (ASID increment) on munmap (even single page)
         - VIPT Cache Flushing improvements
           + Delayed dcache flush for non-aliasing dcache (big performance boost)
           + icache flush aliasing agnostic (no need to kill all possible aliases)
      
        Others:
         - Avoid needless rebuild of DTB files for every kernel build
         - Remove builtin cmdline as that is already provided by DeviceTree/bootargs
         - Fixing unaligned access emulation corner case
         - checkpatch fixes [Sachin]
         - Various fixlets [Noam]
         - Minor build failures/cleanups"
      
      * tag 'arc-v3.10-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (35 commits)
        ARC: [mm] Lazy D-cache flush (non aliasing VIPT)
        ARC: [mm] micro-optimize page size icache invalidate
        ARC: [mm] remove the pessimistic all-alias-invalidate icache helpers
        ARC: [mm] consolidate icache/dcache sync code
        ARC: [mm] optimise icache flush for kernel mappings
        ARC: [mm] optimise icache flush for user mappings
        ARC: [mm] optimize needless full mm TLB flush on munmap
        ARC: Add support for nSIM OSCI System C model
        ARC: [TB10x] Adapt device tree to new compatible string
        ARC: [TB10x] Add support for TB10x platform
        ARC: [TB10x] Device tree of TB100 and TB101 Development Kits
        ARC: Prepare interrupt code for external controllers
        ARC: Allow embedded arc-intc to be properly placed in DT intc hierarchy
        ARC: [cmdline] Don't overwrite u-boot provided bootargs
        ARC: [cmdline] Remove CONFIG_CMDLINE
        ARC: [plat-arcfpga] defconfig update
        ARC: unaligned access emulation broken if callee-reg dest of LD/ST
        ARC: unaligned access emulation error handling consolidation
        ARC: Debug/crash-printing Improvements
        ARC: fix typo with clock speed
        ...
      e30f4192
    • L
      Merge branch 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile · b32729b1
      Linus Torvalds 提交于
      Pull tile update from Chris Metcalf:
       "The interesting bug fix is support for the upcoming "4.2" release of
        the Tilera hypervisor, which by default launches Linux at privilege
        level 2 instead of 1.  The fix lets new and old hypervisors and
        Linuxes interoperate more smoothly, so I've tagged it for
        stable@kernel.org so that older Linuxes will be able to boot under the
        newer hypervisor."
      
      * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
        usb: tilegx: fix memleak when create hcd fail
        arch/tile: remove inline marking of EXPORT_SYMBOL functions
        rtc: rtc-tile: add missing platform_device_unregister() when module exit
        tile: support new Tilera hypervisor
      b32729b1
    • L
      shm: fix null pointer deref when userspace specifies invalid hugepage size · 091d0d55
      Li Zefan 提交于
      Dave reported an oops triggered by trinity:
      
        BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
        IP: newseg+0x10d/0x390
        PGD cf8c1067 PUD cf8c2067 PMD 0
        Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
        CPU: 2 PID: 7636 Comm: trinity-child2 Not tainted 3.9.0+#67
        ...
        Call Trace:
          ipcget+0x182/0x380
          SyS_shmget+0x5a/0x60
          tracesys+0xdd/0xe2
      
      This bug was introduced by commit af73e4d9 ("hugetlbfs: fix mmap
      failure in unaligned size request").
      Reported-by: NDave Jones <davej@redhat.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: NLi Zefan <lizfan@huawei.com>
      Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Acked-by: NRik van Riel <riel@redhat.com>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      091d0d55
    • R
      ipc,sem: fix semctl(..., GETNCNT) · de2657f9
      Rik van Riel 提交于
      The semctl GETNCNT returns the number of semops waiting for the
      specified semaphore to become nonzero.  After commit 9f1bc2c9
      ("ipc,sem: have only one list in struct sem_queue"), the semops waiting
      on just one semaphore are waiting on that semaphore's list.
      
      In order to return the correct count, we have to walk that list too, in
      addition to the sem_array's list for complex operations.
      Signed-off-by: NRik van Riel <riel@redhat.com>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      de2657f9
    • R
      ipc,sem: fix semctl(..., GETZCNT) · ebc2e5e6
      Rik van Riel 提交于
      The semctl GETZCNT returns the number of semops waiting for the
      specified semaphore to become zero.  After commit 9f1bc2c9
      ("ipc,sem: have only one list in struct sem_queue"), the semops waiting
      on just one semaphore are waiting on that semaphore's list.
      
      In order to return the correct count, we have to walk that list too, in
      addition to the sem_array's list for complex operations.
      
      This bug broke dbench; it works again with this patch applied.
      Signed-off-by: NRik van Riel <riel@redhat.com>
      Reported-by: NKent Overstreet <koverstreet@google.com>
      Tested-by: NKent Overstreet <koverstreet@google.com>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ebc2e5e6
    • L
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs · 07e07450
      Linus Torvalds 提交于
      Pull more vfs fixes from Al Viro:
       "Regression fix from Geert + yet another open-coded kernel_read()"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
        ecryptfs: don't open-code kernel_read()
        xtensa simdisk: Fix proc_create_data() conversion fallout
      07e07450
    • D
      ARM: exynos: dts: Fixed vbus-gpios · c58c1a4c
      Doug Anderson 提交于
      The 'samsung,vbus-gpio' was submitted before pinmux landed for
      exynos5250 and uses the old-style gpio specifier.  Fix the two
      exynos5250 boards that use it.
      Signed-off-by: NDoug Anderson <dianders@chromium.org>
      Signed-off-by: NOlof Johansson <olof@lixom.net>
      c58c1a4c
    • I
      ARM: EXYNOS5: Fix kernel dump in AFTR idle mode · 08858461
      Inderpal Singh 提交于
      The kernel crashes while resuming from AFTR idle mode. It happens
      because L2 cache was not going into retention state.
      
      This patch configures the USE_RETENTION bit of ARM_L2_OPTION register
      so that it does not depend on MANUAL_L2RSTDISABLE_CONTROL of
      ARM_COMMON_OPTION register for L2RSTDISABLE signal.
      Signed-off-by: NInderpal Singh <inderpal.singh@linaro.org>
      Tested-by: NChander Kashyap <chander.kashyap@linaro.org>
      Signed-off-by: NOlof Johansson <olof@lixom.net>
      08858461
    • O
      Merge tag 'omap-for-v3.10/dt-fixes-for-merge-window' of... · 6e6a3af7
      Olof Johansson 提交于
      Merge tag 'omap-for-v3.10/dt-fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
      
      From Tony Lindgren:
      Omap device tree fixes for issue discovered during the merge window:
      
      - Fix triggering for GPIO interrupts that's needed for 4430sdp
        Ethernet. Otherwise booting with nfsroot won't work.
      - Fix CPU operating point values
      - Fix wrong assumption that twl PMIC is always connected to omap3
      - Add gpmc for am33xx so beaglebone users can use the bus
      - Cosmetic fix for mcspi pin muxing to avoid confusion
      
      * tag 'omap-for-v3.10/dt-fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
        ARM: dts: don't assume boards are using twl4030 for omap3
        ARM: dts: Configure and fix the McSPI pins for 4430sdp
        ARM: dts: AM33XX: Add GPMC node
        ARM: dts: OMAP4460: Fix CPU OPP voltages
        ARM: dts: OMAP36xx: Fix CPU OPP voltages
        ARM: dts: OMAP4: Fix ethernet IRQ for OMAP4 boards
      6e6a3af7
    • O
      Merge tag 'omap-for-v3.10/fixes-for-merge-window-part2' of... · 474dbaa7
      Olof Johansson 提交于
      Merge tag 'omap-for-v3.10/fixes-for-merge-window-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
      
      From Tony Lindgren:
      Omap fixes for things that were discovered during the merge window:
      
      - Few GPMC fixes and binding doc updates noted after sending
        pull requests for the GPMC branch.
      - Board fixes for beagle usb host and rx51 spi probe order
      - SoC fixes dt earlyprintk, omap1 dma and omap2+ id.c error
        handling fixes
      
      Then few minor things that are not strictly fixes but are good
      to get out of the way:
      
      - Add missing legacy mux registers for am/dm73x gpio
      - Add detection for am33xx pg2.1 silicon
      - Enable twl4030 audio modules in defconfig
      
      * tag 'omap-for-v3.10/fixes-for-merge-window-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
        ARM: OMAP2+: Remove bogus IS_ERR_OR_NULL checking from id.c
        ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module
        ARM: OMAP2: AM33XX: id: Add support for new AM335x PG2.1 Si
        omap: mux: add AM/DM37x gpios
        ARM: OMAP1: DMA: fix error handling in omap1_system_dma_init()
        ARM: OMAP2+: omap_device: use late_initcall_sync
        ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices
        ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx
        ARM: OMAP2+: only WARN if a GPMC child probe function fail
        ARM: OMAP2+: only search for GPMC DT child nodes on probe
        Documentation: dt: update properties in TI GPMC NAND example
        Documentation: dt: update TI GPMC ethernet binding properties
      Signed-off-by: NOlof Johansson <olof@lixom.net>
      474dbaa7
    • L
      ARM: ux500: Rid ignored return value of regulator_enable() compiler warning · 27d4cdca
      Lee Jones 提交于
      arch/arm/mach-ux500/board-mop500.c: In function ‘mop500_prox_activate’:
      arch/arm/mach-ux500/board-mop500.c:406:18: warning: ignoring return value of
              ‘regulator_enable’, declared with attribute warn_unused_result
              [-Wunused-result]
      Signed-off-by: NLee Jones <lee.jones@linaro.org>
      Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
      Signed-off-by: NOlof Johansson <olof@lixom.net>
      27d4cdca
    • F
      ARM: ux500: read the correct soc_id number · 33c8abce
      Fabio Baltieri 提交于
      Fix db8500_read_soc_id() to read all five soc_id number locations
      instead of repeating the second one two times.
      Signed-off-by: NFabio Baltieri <fabio.baltieri@linaro.org>
      Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
      Signed-off-by: NOlof Johansson <olof@lixom.net>
      33c8abce
    • L
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs · 983a5f84
      Linus Torvalds 提交于
      Pull btrfs update from Chris Mason:
       "These are mostly fixes.  The biggest exceptions are Josef's skinny
        extents and Jan Schmidt's code to rebuild our quota indexes if they
        get out of sync (or you enable quotas on an existing filesystem).
      
        The skinny extents are off by default because they are a new variation
        on the extent allocation tree format.  btrfstune -x enables them, and
        the new format makes the extent allocation tree about 30% smaller.
      
        I rebased this a few days ago to rework Dave Sterba's crc checks on
        the super block, but almost all of these go back to rc6, since I
        though 3.9 was due any minute.
      
        The biggest missing fix is the tracepoint bug that was hit late in
        3.9.  I ran into problems with that in overnight testing and I'm still
        tracking it down.  I'll definitely have that fixed for rc2."
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (101 commits)
        Btrfs: allow superblock mismatch from older mkfs
        btrfs: enhance superblock checks
        btrfs: fix misleading variable name for flags
        btrfs: use unsigned long type for extent state bits
        Btrfs: improve the loop of scrub_stripe
        btrfs: read entire device info under lock
        btrfs: remove unused gfp mask parameter from release_extent_buffer callchain
        btrfs: handle errors returned from get_tree_block_key
        btrfs: make static code static & remove dead code
        Btrfs: deal with errors in write_dev_supers
        Btrfs: remove almost all of the BUG()'s from tree-log.c
        Btrfs: deal with free space cache errors while replaying log
        Btrfs: automatic rescan after "quota enable" command
        Btrfs: rescan for qgroups
        Btrfs: split btrfs_qgroup_account_ref into four functions
        Btrfs: allocate new chunks if the space is not enough for global rsv
        Btrfs: separate sequence numbers for delayed ref tracking and tree mod log
        btrfs: move leak debug code to functions
        Btrfs: return free space in cow error path
        Btrfs: set UUID in root_item for created trees
        ...
      983a5f84