- 07 6月, 2011 1 次提交
-
-
由 Arnaud Lacombe 提交于
Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>
-
- 24 5月, 2011 1 次提交
-
-
由 Arnaud Lacombe 提交于
Signed-off-by: NArnaud Lacombe <lacombar@gmail.com> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 18 4月, 2011 1 次提交
-
-
由 Michal Marek 提交于
Timestamps in file data are useless and there is already one in .config Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 15 12月, 2010 3 次提交
-
-
由 Arnaud Lacombe 提交于
Signed-off-by: NArnaud Lacombe <lacombar@gmail.com> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
由 Arnaud Lacombe 提交于
Replacing S_TRISTATE by S_BOOLEAN is a no-op for conf_write_symbol(). Signed-off-by: NArnaud Lacombe <lacombar@gmail.com> [mmarek: Fix unused variable warning in conf_write()] Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
由 Arnaud Lacombe 提交于
AUTOCONF_INCLUDED is not checked is not used within the tree and its parent header, `autoconf.h', is safe to be re-included. Signed-off-by: NArnaud Lacombe <lacombar@gmail.com> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 02 11月, 2010 1 次提交
-
-
由 Uwe Kleine-König 提交于
"gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 04 10月, 2010 1 次提交
-
-
由 Will Newton 提交于
This prevents the buffers being overflowed when using a config file with a long name. PATH_MAX is used elsewhere in the same file, so use it here as well. Signed-off-by: NWill Newton <will.newton@imgtec.com> Acked-by: NWANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 01 10月, 2010 1 次提交
-
-
由 Naohiro Aota 提交于
commit 8baefd30 of linux-next replaced a `switch()' statement with some `if()' statements, but left `break's in the `switch()' statement untouched. This cause read config loop to exit and so "make oldconfig" is not much usable (see below). > $ make oldconfig ><snip> > scripts/kconfig/conf --oldconfig Kconfig > # > # using defaults found in /boot/config-2.6.34-ccs-r1 > # > * > * Restart config... > * > * > * General setup > * > Prompt for development and/or incomplete code/drivers (EXPERIMENTAL) [N/y/?] (NEW) (I've already have "CONFIG_EXPERIMENTAL=y" in the old config file. But that's not read here.) This patch should fix this problem. Signed-off-by: NNaohiro Aota <naota@elisp.net> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 20 9月, 2010 3 次提交
-
-
由 Arnaud Lacombe 提交于
Signed-off-by: NArnaud Lacombe <lacombar@gmail.com> Reviewed-by: NSam Ravnborg <sam@ravnborg.org> Reviewed-by: NMichal Marek <mmarek@suse.cz>
-
由 Arnaud Lacombe 提交于
Signed-off-by: NArnaud Lacombe <lacombar@gmail.com> Reviewed-by: NSam Ravnborg <sam@ravnborg.org> Reviewed-by: NMichal Marek <mmarek@suse.cz>
-
由 Arnaud Lacombe 提交于
With the upcoming dynamical configuration prefix, we can no longer assume that the prefix will start by a 'C'. As such, we can no longer hardcode this value in the `case ...:', so replace the `switch() { ... }' statement by a more flexible 'if () { ... }' statement. Signed-off-by: NArnaud Lacombe <lacombar@gmail.com> Reviewed-by: NSam Ravnborg <sam@ravnborg.org> Reviewed-by: NMichal Marek <mmarek@suse.cz>
-
- 17 8月, 2010 2 次提交
-
-
由 Michal Marek 提交于
Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
由 Arnaud Lacombe 提交于
This fixes: % gmake LKC_GENPARSER=1 menuconfig [...] scripts/kconfig/confdata.c:739: error: 'errno' undeclared (first use in this function) scripts/kconfig/confdata.c:739: error: (Each undeclared identifier is reported only once scripts/kconfig/confdata.c:739: error: for each function it appears in.) scripts/kconfig/confdata.c:739: error: 'ENOENT' undeclared (first use in this function) triggered on NetBSD. Signed-off-by: NArnaud Lacombe <lacombar@gmail.com> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 15 8月, 2010 1 次提交
-
-
由 Sam Ravnborg 提交于
savedefconfig failed to save the correct minimal config when it encountered a choice marked optional. Consider following minimal configuration: $cat Kconfig choice prompt "choice" optional config A bool "a" config B bool "b" endchoice $cat .config | grep -v ^# CONFIG_A=y $conf --savedefconfig=defconfig Kconfig would before this fix result in an empty file, because kconfig would assume that CONFIG_A=y is a default value. But because the choice is optional the default is that both A and B are =n. Fix so we handle optional choices correct. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 13 8月, 2010 1 次提交
-
-
由 Jean Sacren 提交于
This fix facilitates fwrite() in both confdata.c and expr.c, either it succeeds in writing, or an error occurs, or the end of file is reached. Signed-off-by: NJean Sacren <sakiwit@gmail.com> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 12 8月, 2010 2 次提交
-
-
由 Sam Ravnborg 提交于
If a minimal config did not specify the value of all choice values, the resulting configuration could have wrong values. Consider following example: config M def_bool y option modules choice prompt "choice list" config A tristate "a" config B tristate "b" endchoice With a defconfig like this: CONFIG_M=y CONFIG_A=y The resulting configuration would have CONFIG_A=m which was unexpected. The problem was not not all choice values were set and thus kconfig calculated a wrong value. The fix is to set all choice values when we read a defconfig files. conf_set_all_new_symbols() is refactored such that random choice values are now handled by a dedicated function. And new choice values are set by set_all_choice_values(). This was not the minimal fix, but the fix that resulted in the most readable code. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Reported-by: NArve Hjønnevåg <arve@android.com> Tested-by: NArve Hjønnevåg <arve@android.com> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
由 Sam Ravnborg 提交于
savedefconfig failed to save choice symbols equal to 'y' for tristate choices. This resulted in this value being lost. In particular is fixes an issue where make ARCH=avr32 atngw100_defconfig make ARCH=avr32 savedefconfig cp defconfig arch/avr32/configs/atngw100_defconfig make ARCH=avr32 atngw100_defconfig diff -u .config .config.old failed to produce an identical .config. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 03 8月, 2010 2 次提交
-
-
由 Sam Ravnborg 提交于
savedefconfig will save a minimal config to a file named "defconfig". The config symbols are saved in the same order as they appear in the menu structure so it should be possible to map them to the relevant menus if desired. The implementation was tested against several minimal configs for arm which was created using brute-force. There was one regression related to default numbers which had their valid range further limited by another symbol. Sample: config FOO int "foo" default 4 config BAR int "bar" range 0 FOO If FOO is set to 3 then BAR cannot take a value higher than 3. But the current implementation will set BAR equal to 4. This is seldomly used and the final configuration is OK, and the fix was non-trivial. So it was documented in the code and left as is. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
由 Sam Ravnborg 提交于
Add a a few local functions to avoid some code duplication No functional changes. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 29 7月, 2010 1 次提交
-
-
由 Ulf Magnusson 提交于
There seems to be a kconfig bug due to MODULES not always being evaluated if no .config is found. Take the following Kconfig as an example: config MODULES def_bool y config FOO def_tristate m With no .config, the following configuration is generated: CONFIG_MODULES=y CONFIG_FOO=y With an empty .config, the following: CONFIG_MODULES=y CONFIG_FOO=m Tristate choice statements can also exhibit the problem, due to having an implicit rev_dep (select) containing "m". The problem is that MODULES is never evaluted in conf_read_simple() unless there's a .config. The following patch fixes this. Signed-off-by: NUlf Magnusson <ulfalizer.lkml@gmail.com> Reviewed-by: NWANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 26 7月, 2010 1 次提交
-
-
由 Peter Korsgaard 提交于
Give boolean symbols a 50% chance of getting enabled, rather than 67%. Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 12 12月, 2009 2 次提交
-
-
由 Michal Marek 提交于
To make it easier for module-init-tools and scripts like mkinitrd to distinguish builtin and missing modules, install a modules.builtin file listing all builtin modules. This is done by generating an additional config file (tristate.conf) with tristate options set to uppercase 'Y' or 'M'. If we source that config file, the builtin modules appear in obj-Y. Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
由 Sam Ravnborg 提交于
Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 20 9月, 2009 1 次提交
-
-
由 Trevor Keith 提交于
Warnings found via gcc -Wmissing-prototypes. Signed-off-by: NTrevor Keith <tsrk@tsrk.net> Acked-by: NWANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 10 6月, 2009 1 次提交
-
-
由 Markus Heidelberg 提交于
Regardless of KCONFIG_AUTOCONFIG, the filename written as a Make target into "include/config/auto.conf.cmd" was always the default one. Of course this doesn't make it work for the Kernel kbuild system, since there the filename is hardcoded at several places in the Makefiles. Signed-off-by: NMarkus Heidelberg <markus.heidelberg@web.de> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 16 3月, 2009 1 次提交
-
-
由 Sam Ravnborg 提交于
Ingo Molnar reported that 'make randconfig' was not covering choice blocks properly, resulting in certain config options being left out of randconfig testing altogether. With the following patch we: - properly randomize choice value for normal choice blocks - properly randomize for multi choice blocks - added several comments to explain what is going on The root cause of the bug was that SYMBOL_VALID was set on the symbol representing the choice block so clearing this did the trick initially. But testign revealed a few more issues that is now fixed. Reported-by: NIngo Molnar <mingo@elte.hu> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 27 10月, 2008 1 次提交
-
-
由 Al Viro 提交于
If you use KCONFIG_ALLCONFIG (even with empty file) you get broken allmodconfig/allyesconfig; CONFIG_MODULES gets turned off, with obvious massive fallout. Breakage had been introduced when conf_set_all_new_symbols() got used for allmodconfig et.al. What happens is that sym_calc_value(modules_sym) done in conf_read_simple() sets SYMBOL_VALID on both modules_sym and MODULES. When we get to conf_set_all_new_symbols(), we set sym->def[S_DEF_USER] on everything, but it has no effect on sym->curr for the symbols that already have SYMBOL_VALID - these are stuck. Solution: use sym_clear_all_valid() in there. Note that it makes reevaluation of modules_sym redundant - sym_clear_all_valid() will do that itself. [ Fixes http://bugzilla.kernel.org/show_bug.cgi?id=11512, says Alexey ] Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 29 9月, 2008 1 次提交
-
-
由 zippel@linux-m68k.org 提交于
Commit f072181e ("kconfig: drop the ""trying to assign nonexistent symbol" warning") simply dropped the warnings, but it does a little more than that, it also marks the current .config as needed saving, so add this back. Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 8月, 2008 1 次提交
-
-
由 Sam Ravnborg 提交于
They really stand out now that make *config is less chatty - and they are generally ignored - so drop them. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Adrian Bunk <bunk@kernel.org>
-
- 26 7月, 2008 1 次提交
-
-
由 Roman Zippel 提交于
Add conf_set_all_new_symbols() which set all symbols (which don't have a value yet) to a specifed value. Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 29 1月, 2008 3 次提交
-
-
由 Roman Zippel 提交于
Rename E_CHOICE to E_LIST to explicitly add support for expression lists. Add a helper macro expr_list_for_each_sym to more easily iterate over the list. Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
We had macros named the same as a set of enumeration values. It is legal code but very confusing to read - so rename the macros from E_* to EXPR_* Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
-
由 Jan Engelhardt 提交于
Allow config variables in .config to override earlier ones in the same file. In other words, # CONFIG_SECURITY is not defined CONFIG_SECURITY=y will activate it. This makes it a bit easier to do cat original-config myconfig myconfig2 ... >.config; and run *config as expected. Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Randy Dunlap <randy.dunlap@oracle.com>
-
- 18 11月, 2007 2 次提交
-
-
由 Sam Ravnborg 提交于
Simplify "make ARCH=x86" and fix kconfig so we again can set 64BIT in all.config. For a fix the diffstat is nice: 6 files changed, 3 insertions(+), 36 deletions(-) The patch reverts these commits: - 0f855aa6 ("kconfig: add helper to set config symbol from environment variable") - 2a113281 ("kconfig: use $K64BIT to set 64BIT with all*config targets") Roman Zippel pointed out that kconfig supported string compares so the additional complexity introduced by the above two patches were not needed. With this patch we have following behaviour: # make {allno,allyes,allmod,rand}config [ARCH=...] option \ host arch | 32bit | 64bit ===================================================== ./. | 32bit | 64bit ARCH=x86 | 32bit | 32bit ARCH=i386 | 32bit | 32bit ARCH=x86_64 | 64bit | 64bit The general rule are that ARCH= and native architecture takes precedence over the configuration. So make ARCH=i386 [whatever] will always build a 32-bit kernel no matter what the configuration says. The configuration will be updated to 32-bit if it was configured to 64-bit and the other way around. This behaviour is consistent with previous behaviour so no suprises here. make ARCH=x86 will per default result in a 32-bit kernel but as the only ARCH= value x86 allow the user to select between 32-bit and 64-bit using menuconfig. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Andreas Herrmann <aherrman@arcor.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sam Ravnborg 提交于
Simplify "make ARCH=x86" and fix kconfig so we again can set 64BIT in all.config. For a fix the diffstat is nice: 6 files changed, 3 insertions(+), 36 deletions(-) The patch reverts these commits: 0f855aa6 -> kconfig: add helper to set config symbol from environment variable 2a113281 -> kconfig: use $K64BIT to set 64BIT with all*config targets Roman Zippel pointed out that kconfig supported string compares so the additional complexity introduced by the above two patches were not needed. With this patch we have following behaviour: # make {allno,allyes,allmod,rand}config [ARCH=...] option \ host arch | 32bit | 64bit ===================================================== ./. | 32bit | 64bit ARCH=x86 | 32bit | 32bit ARCH=i386 | 32bit | 32bit ARCH=x86_64 | 64bit | 64bit The general rule are that ARCH= and native architecture takes precedence over the configuration. So make ARCH=i386 [whatever] will always build a 32-bit kernel no matter what the configuration says. The configuration will be updated to 32-bit if it was configured to 64-bit and the other way around. This behaviour is consistent with previous behaviour so no suprises here. make ARCH=x86 will per default result in a 32-bit kernel but as the only ARCH= value x86 allow the user to select between 32-bit and 64-bit using menuconfig. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Andreas Herrmann <aherrman@arcor.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
-
- 13 11月, 2007 2 次提交
-
-
由 Sam Ravnborg 提交于
Add conf_set_env_sym() that can set an already defined symbol based on the value of an environment variable. Unknown symbols are silently ignored. A warning is printed if the value of the environment variable is unexpected. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
-
由 Sam Ravnborg 提交于
This patch introduce no functional changes. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
-
- 17 7月, 2007 1 次提交
-
-
由 Roman Zippel 提交于
Normally generated values (Kconfig entries without a prompt) are cleared as they are regenerated anyway and so they appear as new should they become visible and defaults work as expected (once a value is set defaults aren't used anymore). The detection whether a value is generated or not is only based on its visibility status, which can quickly change for a lot of symbols by just removing a single line from .config or adding a dependency to Kconfig as you noticed. The patch now suppresses this logic when .config and Kconfig aren't in sync and .config needs to be updated, so that you can remove now a random value from .config and oldconfig won't reask for many other values. Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 14 12月, 2006 1 次提交
-
-
由 Karsten Wiese 提交于
Added function sets "void (*conf_changed_callback)(void)". Call it, if .config's changed state changes. Use above in qconf.cc to set gui's save-widget's sensitvity. Signed-off-by: NKarsten Wiese <fzu@wemgehoertderstaat.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-