- 26 6月, 2014 19 次提交
-
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull CIFS fixes from Steve French: "Small set of misc cifs/smb3 fixes" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: [CIFS] fix mount failure with broken pathnames when smb3 mount with mapchars option cifs: revalidate mapping prior to satisfying read_iter request with cache=loose fs/cifs: fix regression in cifs_create_mf_symlink()
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging由 Linus Torvalds 提交于
Pull hwmon fixes from Guenter Roeck: "Various minor fixes" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (gpio-fan) Change name used in hwmon_device_register_with_groups hwmon: (emc1403) Fix missing 'select REGMAP_I2C' in Kconfig hwmon: (ntc_thermistor) Use the manufacturer name properly devicetree: bindings: Document murata vendor prefix hwmon: (w83l786ng) Report correct minimum fan speed
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix crash in ipvs tot_stats estimator, from Julian Anastasov. 2) Fix OOPS in nf_nat on netns removal, from Florian Westphal. 3) Really really really fix locking issues in slip and slcan tty write wakeups, from Tyler Hall. 4) Fix checksum offloading in fec driver, from Fugang Duan. 5) Off by one in BPF instruction limit test, from Kees Cook. 6) Need to clear all TSO capability flags when doing software TSO in tg3 driver, from Prashant Sreedharan. 7) Fix memory leak in vlan_reorder_header() error path, from Li RongQing. 8) Fix various bugs in xen-netfront and xen-netback multiqueue support, from David Vrabel and Wei Liu. 9) Fix deadlock in cxgb4 driver, from Li RongQing. 10) Prevent double free of no-cache DST entries, from Eric Dumazet. 11) Bad csum_start handling in skb_segment() leads to crashes when forwarding, from Tom Herbert. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits) net: fix setting csum_start in skb_segment() ipv4: fix dst race in sk_dst_get() net: filter: Use kcalloc/kmalloc_array to allocate arrays trivial: net: filter: Change kerneldoc parameter order trivial: net: filter: Fix typo in comment net: allwinner: emac: Add missing free_irq cxgb4: use dev_port to identify ports xen-netback: bookkeep number of active queues in our own module tg3: Change nvram command timeout value to 50ms cxgb4: Not need to hold the adap_rcu_lock lock when read adap_rcu_list be2net: fix qnq mode detection on VFs of: mdio: fixup of_phy_register_fixed_link parsing of new bindings at86rf230: fix irq setup net: phy: at803x: fix coccinelle warnings net/mlx4_core: Fix the error flow when probing with invalid VF configuration tulip: Poll link status more frequently for Comet chips net: huawei_cdc_ncm: increase command buffer size drivers: net: cpsw: fix dual EMAC stall when connected to same switch xen-netfront: recreate queues correctly when reconnecting xen-netfront: fix oops when disconnected from backend ...
-
由 Tom Herbert 提交于
Dave Jones reported that a crash is occurring in csum_partial tcp_gso_segment inet_gso_segment ? update_dl_migration skb_mac_gso_segment __skb_gso_segment dev_hard_start_xmit sch_direct_xmit __dev_queue_xmit ? dev_hard_start_xmit dev_queue_xmit ip_finish_output ? ip_output ip_output ip_forward_finish ip_forward ip_rcv_finish ip_rcv __netif_receive_skb_core ? __netif_receive_skb_core ? trace_hardirqs_on __netif_receive_skb netif_receive_skb_internal napi_gro_complete ? napi_gro_complete dev_gro_receive ? dev_gro_receive napi_gro_receive It looks like a likely culprit is that SKB_GSO_CB()->csum_start is not set correctly when doing non-scatter gather. We are using offset as opposed to doffset. Reported-by: NDave Jones <davej@redhat.com> Tested-by: NDave Jones <davej@redhat.com> Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Fixes: 7e2b10c1 ("net: Support for multiple checksums with gso") Acked-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client fixes from Trond Myklebust: "Highlights include: - Stable fix for a data corruption case due to incorrect cache validation - Fix a couple of false positive cache invalidations - Fix NFSv4 security negotiation issues" * tag 'nfs-for-3.16-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: test SECINFO RPC_AUTH_GSS pseudoflavors for support NFS Return -EPERM if no supported or matching SECINFO flavor NFS check the return of nfs4_negotiate_security in nfs4_submount NFS: Don't mark the data cache as invalid if it has been flushed NFS: Clear NFS_INO_REVAL_PAGECACHE when we update the file size nfs: Fix cache_validity check in nfs_write_pageuptodate()
-
由 Eric Dumazet 提交于
When IP route cache had been removed in linux-3.6, we broke assumption that dst entries were all freed after rcu grace period. DST_NOCACHE dst were supposed to be freed from dst_release(). But it appears we want to keep such dst around, either in UDP sockets or tunnels. In sk_dst_get() we need to make sure dst refcount is not 0 before incrementing it, or else we might end up freeing a dst twice. DST_NOCACHE set on a dst does not mean this dst can not be attached to a socket or a tunnel. Then, before actual freeing, we need to observe a rcu grace period to make sure all other cpus can catch the fact the dst is no longer usable. Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NDormando <dormando@rydia.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Klauser 提交于
Use kcalloc/kmalloc_array to make it clear we're allocating arrays. No integer overflow can actually happen here, since len/flen is guaranteed to be less than BPF_MAXINSNS (4096). However, this changed makes sure we're not going to get one if BPF_MAXINSNS were ever increased. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Acked-by: NDaniel Borkmann <dborkman@redhat.com> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Klauser 提交于
Change the order of the parameters to sk_unattached_filter_create() in the kerneldoc to reflect the order they appear in the actual function. This fix is only cosmetic, in the generated doc they still appear in the correct order without the fix. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Acked-by: NDaniel Borkmann <dborkman@redhat.com> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Klauser 提交于
Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Acked-by: NDaniel Borkmann <dborkman@redhat.com> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maxime Ripard 提交于
If the mdio probe function fails in emac_open, the interrupt we just requested isn't freed. If emac_open is called again, for example because we try to set up the interface again, the kernel will oops because the interrupt wasn't properly released. Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Cc: <stable@vger.kernel.org> # 3.11+ Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Commit 3f85944f ("net: Add sysfs file for port number") introduce dev_port to network devices. cxgb4 adapters have multiple ports on the same PCI function, and used dev_id to identify those ports. That use was removed by commit 8c367fcb ("cxgb4: Do not set net_device::dev_id to VI index"), since dev_id should be used only when devices share the same MAC address. Using dev_port for cxgb4 allows different ports on the same PCI function to be identified. Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Liu 提交于
The original code uses netdev->real_num_tx_queues to bookkeep number of queues and invokes netif_set_real_num_tx_queues to set the number of queues. However, netif_set_real_num_tx_queues doesn't allow real_num_tx_queues to be smaller than 1, which means setting the number to 0 will not work and real_num_tx_queues is untouched. This is bogus when xenvif_free is invoked before any number of queues is allocated. That function needs to iterate through all queues to free resources. Using the wrong number of queues results in NULL pointer dereference. So we bookkeep the number of queues in xen-netback to solve this problem. This fixes a regression introduced by multiqueue patchset in 3.16-rc1. There's another bug in original code that the real number of RX queues is never set. In current Xen multiqueue design, the number of TX queues and RX queues are in fact the same. We need to set the numbers of TX and RX queues to the same value. Also remove xenvif_select_queue and leave queue selection to core driver, as suggested by David Miller. Reported-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: NWei Liu <wei.liu2@citrix.com> CC: Ian Campbell <ian.campbell@citrix.com> CC: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Prashant Sreedharan 提交于
Commit 506724c4 "tg3: Override clock, link aware and link idle mode during NVRAM dump" changed the timeout value for nvram command execution from 100ms to 1ms. But the 1ms timeout value was only sufficient for nvram read operations but not write operations for most of the devices supported by tg3 driver. This patch sets the MAX to 50ms. Also it uses usleep_range instead of udelay. Signed-off-by: NPrashant Sreedharan <prashant@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Suggested-by: NDavid Miller <davem@davemloft.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julien D'Ascenzio 提交于
Since commit 648cd48c The hwmon name attributes must not include '-' so the name must be rename from gpio-fan to gpio_fan Signed-off-by: NJulien D'Ascenzio <jdascenzio@yahoo.fr> Reviewed-by: NJean Delvare <jdelvare@suse.de> Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Arnd Bergmann: "A new set of bug fixes for 3.16, containing patches for seven platforms: at91: - drivers/misc fix for Kconfig PWM symbol - correction of several values in DT after conversion to CCF - fix at91sam9261/at91sam9261ek mistake in slow crystal vs. slow RC osc imx: - Use GPIO for card CD/WP on imx51-babbage and eukrea-mbimxsd51, because controller base CD/WP is not working in esdhc driver due to runtime PM support - A couple of random ventana gw5xxx board fixes - Add IMX_IPUV3_CORE back to defconfig, which gets lost when moving IPUv3 driver out of staging tree - Fix enet/fec clock selection on imx6sl - Fix display node on imx53-m53evk board - A couple of Cubox-i updates from Russell, which were omitted from the merge window due to dependency integrator: - fix an OF-related regression against 3.15 mvebu: - mvebu (v7) - Fix broken SoC ID detection - Select ARM_CPU_SUSPEND for v7 - Remove armada38x compatible string (no users yet) - Enable Dove SoC in mvebu_v7_defconfig - kirkwood - Fix phy-connection-type on GuruPlug board qcom: - enable gsbi driver in defconfig - fix section mismatch warning in serial driver samsung: - use WFI macro in platform_do_lowpower because exynos cpuhotplug includes a hardcoded WFI instruction and it causes compile error in Thumb-2 mode. - fix GIC reg sizes for exynos4 SoCs - remove reset timer counter value during boot and resume for mct to fix a big jump in printk timestamps - fix pm code to check cortex-A9 for another exynos SoCs - don't rely on firmware's secondary_cpu_start for mcpm sti: - Ethernet clocks were wrongly defined for STiH415/416 platforms - STiH416 B2020 revision E DTS file name contained uppercase, change to lowercase" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (33 commits) ARM: at91/dt: sam9261: remove slow RC osc ARM: at91/dt: define sam9261ek slow crystal frequency ARM: at91/dt: sam9261: correctly define mainck ARM: at91/dt: sam9n12: correct PLLA ICPLL and OUT values ARM: at91/dt: sam9x5: correct PLLA ICPLL and OUT values misc: atmel_pwm: fix Kconfig symbols ARM: integrator: fix OF-related regression ARM: mvebu: Fix the improper use of the compatible string armada38x using a wildcard ARM: dts: kirkwood: fix phy-connection-type for Guruplug ARM: EXYNOS: Don't rely on firmware's secondary_cpu_start for mcpm ARM: dts: imx51-eukrea-mbimxsd51-baseboard: unbreak esdhc. ARM: dts: imx51-babbage: Fix esdhc setup ARM: dts: mx5: Move the display out of soc {} node ARM: dts: mx5: Fix IPU port node placement ARM: mvebu: select ARM_CPU_SUSPEND for Marvell EBU v7 platforms ARM: mvebu: Fix broken SoC ID detection ARM: imx_v6_v7_defconfig: Enable CONFIG_IMX_IPUV3_CORE ARM: multi_v7_defconfig: Add QCOM GSBI driver ARM: stih41x: Rename stih416-b2020-revE.dts to stih416-b2020e.dts tty: serial: msm: Fix section mismatch warning ...
-
git://github.com/at91linux/linux-at91由 Arnd Bergmann 提交于
Merge "First AT91 fixes batch for 3.16" from Nicolas Ferre: - drivers/misc fix for Kconfig PWM symbol - correction of several values in DT after conversion to CCF - fix at91sam9261/at91sam9261ek mistake in slow crystal vs. slow RC osc * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91/dt: sam9261: remove slow RC osc ARM: at91/dt: define sam9261ek slow crystal frequency ARM: at91/dt: sam9261: correctly define mainck ARM: at91/dt: sam9n12: correct PLLA ICPLL and OUT values ARM: at91/dt: sam9x5: correct PLLA ICPLL and OUT values misc: atmel_pwm: fix Kconfig symbols
-
git://git.infradead.org/linux-mvebu由 Arnd Bergmann 提交于
Merge "mvebu fixes for v3.16" from Jason Cooper: - mvebu - Fix broken SoC ID detection - Select ARM_CPU_SUSPEND for v7 - Remove armada38x compatible string (no users yet) - kirkwood - Fix phy-connection-type on GuruPlug board * tag 'mvebu-fixes-3.16' of git://git.infradead.org/linux-mvebu: ARM: mvebu: Fix the improper use of the compatible string armada38x using a wildcard ARM: dts: kirkwood: fix phy-connection-type for Guruplug ARM: mvebu: select ARM_CPU_SUSPEND for Marvell EBU v7 platforms ARM: mvebu: Fix broken SoC ID detection
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client由 Linus Torvalds 提交于
Pull Ceph fix from Sage Weil: "This fixes a corner case for cloned RBD images" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: handle parent_overlap on writes correctly
-
由 Alexandre Belloni 提交于
The at91sam9261 doesn't actually have a slow RC oscillator, remove it from the dtsi. Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: NBoris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 25 6月, 2014 21 次提交
-
-
由 Alexandre Belloni 提交于
Define at91sam9261ek's slow crystal frequencies. Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: NBoris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Alexandre Belloni 提交于
mainck (CKGR_MCFR register) is actually using main_osc (CKGR_MOR register). Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: NBoris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Alexandre Belloni 提交于
ICPLL can only take 0 or 1, it got mixed with OUT which can be in the [0-3] range. Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: NBoris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Alexandre Belloni 提交于
ICPLL can only take 0 or 1, it got mixed with OUT which can be in the [0-3] range. Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: NBoris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Josef Gajdusek 提交于
In commit 4cab259f, the emc1403 driver was converted to use regmap but the necessary Kconfig option was not added. Signed-off-by: NJosef Gajdusek <atx@atx.name> Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Naveen Krishna Chatradhi 提交于
Murata Manufacturing Co., Ltd is the vendor for NTC (Negative Temperature coefficient) based Thermistors. But, the driver extensively uses "NTC" as the vendor name. This patch corrects the vendor name also updates the compatibility strings according to the vendor-prefix.txt Note: Drivers continue to support the previous compatible strings but further addition of these compatible strings in device tree is deprecated. Signed-off-by: NNaveen Krishna Chatradhi <ch.naveen@samsung.com> Reviewed-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Naveen Krishna Chatradhi 提交于
Add Murata Manufacturing Co., Ltd. to the list of device tree vendor prefixes. Murata manufactures NTC (Negative Temperature Coefficient) based Thermistors for small scale applications like Mobiles and PDAs. Signed-off-by: NNaveen Krishna Chatradhi <ch.naveen@samsung.com> Acked-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Axel Lin 提交于
Current code is buggy, it shows the current fan speed as minimum fan speed. Fix up show_fan_reg macro to correctly report fan and fan_min speed. Signed-off-by: NAxel Lin <axel.lin@ingics.com> Acked-by: NKevin Lo <kevlo@kevlo.org> Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
Pull powerpc fixes and cleanups from Ben Herrenschmidt: "Here are a handful or two of powerpc fixes and simple/trivial cleanups. A bunch of them fix ftrace with the new ABI v2 in Little Endian, the rest is a scattering of fairly simple things" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Don't skip ePAPR spin-table CPUs powerpc/module: Fix TOC symbol CRC powerpc/powernv: Remove OPAL v1 takeover powerpc/kmemleak: Do not scan the DART table selftests/powerpc: Use the test harness for the TM DSCR test powerpc/cell: cbe_thermal.c: Cleaning up a variable is of the wrong type powerpc/kprobes: Fix jprobes on ABI v2 (LE) powerpc/ftrace: Use pr_fmt() to namespace error messages powerpc/ftrace: Fix nop of modules on 64bit LE (ABIv2) powerpc/ftrace: Fix inverted check of create_branch() powerpc/ftrace: Fix typo in mask of opcode powerpc: Add ppc_global_function_entry() powerpc/macintosh/smu.c: Fix closing brace followed by if powerpc: Remove __arch_swab* powerpc: Remove ancient DEBUG_SIG code powerpc/kerenl: Enable EEH for IO accessors
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost由 Linus Torvalds 提交于
Pull vhost cleanups from Michael S Tsirkin: "Two cleanup patches removing code duplication that got introduced by changes in rc1. Not fixing crashes, but I'd rather not carry the duplicate code until the next merge window" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost-scsi: don't open-code kvfree vhost-net: don't open-code kvfree
-
由 Linus Torvalds 提交于
Merge tag 'trace-fixes-v3.16-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing cleanups and fixes from Steven Rostedt: "This includes three patches from Oleg Nesterov. The first is a fix to a race condition that happens between enabling/disabling syscall tracepoints and new process creations (the check to go into the ptrace path for a process can be set when it shouldn't, or not set when it should). Not a major bug but one that should be fixed and even applied to stable. The other two patches are cleanup/fixes that are not that critical, but for an -rc1 release would be nice to have. They both deal with syscall tracepoints. It also includes a patch to introduce a new macro for the TRACE_EVENT() format called __field_struct(). Originally, __field() was used to record any variable into a trace event, but with the addition of setting the "is signed" attribute, the check causes anything but a primitive variable to fail to compile. That is, structs and unions can't be used as they once were. When the "is signed" check was introduce there were only primitive variables being recorded. But that will change soon and it was reported that __field() causes build failures. To solve the __field() issue, __field_struct() is introduced to allow trace_events to be able to record complex types too" * tag 'trace-fixes-v3.16-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Add __field_struct macro for TRACE_EVENT() tracing: syscall_regfunc() should not skip kernel threads tracing: Change syscall_*regfunc() to check PF_KTHREAD and use for_each_process_thread() tracing: Fix syscall_*regfunc() vs copy_process() race
-
由 Nicolas Ferre 提交于
AT91 symbols AT91SAM9263, AT91SAM9RL, and AT91SAM9G45 do not exist and this patch changes them to their correct ARCH_* version. These symbols are chosen instead of the SOC_* ones because this driver is not converted to DT. Anyway, the ATMEL_PWM symbol and the associated driver will be removed soon, during the move to the PWM sub-system. Reported-by: NPaul Bolle <pebolle@tiscali.nl> Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Scott Wood 提交于
Commit 59a53afe "powerpc: Don't setup CPUs with bad status" broke ePAPR SMP booting. ePAPR says that CPUs that aren't presently running shall have status of disabled, with enable-method being used to determine whether the CPU can be enabled. Fix by checking for spin-table, which is currently the only supported enable-method. Signed-off-by: NScott Wood <scottwood@freescale.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Emil Medve <Emilian.Medve@Freescale.com> Cc: stable@vger.kernel.org Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Laurent Dufour 提交于
The commit 71ec7c55 introduced the magic symbol ".TOC." for ELFv2 ABI. This symbol is built manually and has no CRC value computed. A zero value is put in the CRC section to avoid modpost complaining about a missing CRC. Unfortunately, this breaks the kernel module loading when the kernel is relocated (kdump case for instance) because of the relocation applied to the kcrctab values. This patch compute a CRC value for the TOC symbol which will match the one compute by the kernel when it is relocated - aka '0 - relocate_start' done in maybe_relocated called by check_version (module.c). Signed-off-by: NLaurent Dufour <ldufour@linux.vnet.ibm.com> Cc: Anton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
In commit 27f44888 "Add OPAL takeover from PowerVM" we added support for "takeover" on OPAL v1 machines. This was a mode of operation where we would boot under pHyp, and query for the presence of OPAL. If detected we would then do a special sequence to take over the machine, and the kernel would end up running in hypervisor mode. OPAL v1 was never a supported product, and was never shipped outside IBM. As far as we know no one is still using it. Newer versions of OPAL do not use the takeover mechanism. Although the query for OPAL should be harmless on machines with newer OPAL, we have seen a machine where it causes a crash in Open Firmware. The code in early_init_devtree() to copy boot_command_line into cmd_line was added in commit 817c21ad "Get kernel command line accross OPAL takeover", and AFAIK is only used by takeover, so should also be removed. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Li RongQing 提交于
cxgb4_netdev maybe lead to dead lock, since it uses a spin lock, and be called in both thread and softirq context, but not disable BH, the lockdep report is below; In fact, cxgb4_netdev only reads adap_rcu_list with RCU protection, so not need to hold spin lock again. ================================= [ INFO: inconsistent lock state ] 3.14.7+ #24 Tainted: G C O --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. radvd/3794 [HC0[0]:SC1[1]:HE1:SE0] takes: (adap_rcu_lock){+.?...}, at: [<ffffffffa09989ea>] clip_add+0x2c/0x116 [cxgb4] {SOFTIRQ-ON-W} state was registered at: [<ffffffff810fca81>] __lock_acquire+0x34a/0xe48 [<ffffffff810fd98b>] lock_acquire+0x82/0x9d [<ffffffff815d6ff8>] _raw_spin_lock+0x34/0x43 [<ffffffffa09989ea>] clip_add+0x2c/0x116 [cxgb4] [<ffffffffa0998beb>] cxgb4_inet6addr_handler+0x117/0x12c [cxgb4] [<ffffffff815da98b>] notifier_call_chain+0x32/0x5c [<ffffffff815da9f9>] __atomic_notifier_call_chain+0x44/0x6e [<ffffffff815daa32>] atomic_notifier_call_chain+0xf/0x11 [<ffffffff815b1356>] inet6addr_notifier_call_chain+0x16/0x18 [<ffffffffa01f72e5>] ipv6_add_addr+0x404/0x46e [ipv6] [<ffffffffa01f8df0>] addrconf_add_linklocal+0x5f/0x95 [ipv6] [<ffffffffa01fc3e9>] addrconf_notify+0x632/0x841 [ipv6] [<ffffffff815da98b>] notifier_call_chain+0x32/0x5c [<ffffffff810e09a1>] __raw_notifier_call_chain+0x9/0xb [<ffffffff810e09b2>] raw_notifier_call_chain+0xf/0x11 [<ffffffff8151b3b7>] call_netdevice_notifiers_info+0x4e/0x56 [<ffffffff8151b3d0>] call_netdevice_notifiers+0x11/0x13 [<ffffffff8151c0a6>] netdev_state_change+0x1f/0x38 [<ffffffff8152f004>] linkwatch_do_dev+0x3b/0x49 [<ffffffff8152f184>] __linkwatch_run_queue+0x10b/0x144 [<ffffffff8152f1dd>] linkwatch_event+0x20/0x27 [<ffffffff810d7bc0>] process_one_work+0x1cb/0x2ee [<ffffffff810d7e3b>] worker_thread+0x12e/0x1fc [<ffffffff810dd391>] kthread+0xc4/0xcc [<ffffffff815dc48c>] ret_from_fork+0x7c/0xb0 irq event stamp: 3388 hardirqs last enabled at (3388): [<ffffffff810c6c85>] __local_bh_enable_ip+0xaa/0xd9 hardirqs last disabled at (3387): [<ffffffff810c6c2d>] __local_bh_enable_ip+0x52/0xd9 softirqs last enabled at (3288): [<ffffffffa01f1d5b>] rcu_read_unlock_bh+0x0/0x2f [ipv6] softirqs last disabled at (3289): [<ffffffff815ddafc>] do_softirq_own_stack+0x1c/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(adap_rcu_lock); <Interrupt> lock(adap_rcu_lock); *** DEADLOCK *** 5 locks held by radvd/3794: #0: (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffffa020b85a>] rawv6_sendmsg+0x74b/0xa4d [ipv6] #1: (rcu_read_lock){.+.+..}, at: [<ffffffff8151ac6b>] rcu_lock_acquire+0x0/0x29 #2: (rcu_read_lock){.+.+..}, at: [<ffffffffa01f4cca>] rcu_lock_acquire.constprop.16+0x0/0x30 [ipv6] #3: (rcu_read_lock){.+.+..}, at: [<ffffffff810e09b4>] rcu_lock_acquire+0x0/0x29 #4: (rcu_read_lock){.+.+..}, at: [<ffffffffa0998782>] rcu_lock_acquire.constprop.40+0x0/0x30 [cxgb4] stack backtrace: CPU: 7 PID: 3794 Comm: radvd Tainted: G C O 3.14.7+ #24 Hardware name: Supermicro X7DBU/X7DBU, BIOS 6.00 12/03/2007 ffffffff81f15990 ffff88012fdc36a8 ffffffff815d0016 0000000000000006 ffff8800c80dc2a0 ffff88012fdc3708 ffffffff815cc727 0000000000000001 0000000000000001 ffff880100000000 ffffffff81015b02 ffff8800c80dcb58 Call Trace: <IRQ> [<ffffffff815d0016>] dump_stack+0x4e/0x71 [<ffffffff815cc727>] print_usage_bug+0x1ec/0x1fd [<ffffffff81015b02>] ? save_stack_trace+0x27/0x44 [<ffffffff810fbfaa>] ? check_usage_backwards+0xa0/0xa0 [<ffffffff810fc640>] mark_lock+0x11b/0x212 [<ffffffff810fca0b>] __lock_acquire+0x2d4/0xe48 [<ffffffff810fbfaa>] ? check_usage_backwards+0xa0/0xa0 [<ffffffff810fbff6>] ? check_usage_forwards+0x4c/0xa6 [<ffffffff810c6c8a>] ? __local_bh_enable_ip+0xaf/0xd9 [<ffffffff810fd98b>] lock_acquire+0x82/0x9d [<ffffffffa09989ea>] ? clip_add+0x2c/0x116 [cxgb4] [<ffffffffa0998782>] ? rcu_read_unlock+0x23/0x23 [cxgb4] [<ffffffff815d6ff8>] _raw_spin_lock+0x34/0x43 [<ffffffffa09989ea>] ? clip_add+0x2c/0x116 [cxgb4] [<ffffffffa09987b0>] ? rcu_lock_acquire.constprop.40+0x2e/0x30 [cxgb4] [<ffffffffa0998782>] ? rcu_read_unlock+0x23/0x23 [cxgb4] [<ffffffffa09989ea>] clip_add+0x2c/0x116 [cxgb4] [<ffffffffa0998beb>] cxgb4_inet6addr_handler+0x117/0x12c [cxgb4] [<ffffffff810fd99d>] ? lock_acquire+0x94/0x9d [<ffffffff810e09b4>] ? raw_notifier_call_chain+0x11/0x11 [<ffffffff815da98b>] notifier_call_chain+0x32/0x5c [<ffffffff815da9f9>] __atomic_notifier_call_chain+0x44/0x6e [<ffffffff815daa32>] atomic_notifier_call_chain+0xf/0x11 [<ffffffff815b1356>] inet6addr_notifier_call_chain+0x16/0x18 [<ffffffffa01f72e5>] ipv6_add_addr+0x404/0x46e [ipv6] [<ffffffff810fde6a>] ? trace_hardirqs_on+0xd/0xf [<ffffffffa01fb634>] addrconf_prefix_rcv+0x385/0x6ea [ipv6] [<ffffffffa0207950>] ndisc_rcv+0x9d3/0xd76 [ipv6] [<ffffffffa020d536>] icmpv6_rcv+0x592/0x67b [ipv6] [<ffffffff810c6c85>] ? __local_bh_enable_ip+0xaa/0xd9 [<ffffffff810c6c85>] ? __local_bh_enable_ip+0xaa/0xd9 [<ffffffff810fd8dc>] ? lock_release+0x14e/0x17b [<ffffffffa020df97>] ? rcu_read_unlock+0x21/0x23 [ipv6] [<ffffffff8150df52>] ? rcu_read_unlock+0x23/0x23 [<ffffffffa01f4ede>] ip6_input_finish+0x1e4/0x2fc [ipv6] [<ffffffffa01f540b>] ip6_input+0x33/0x38 [ipv6] [<ffffffffa01f5557>] ip6_mc_input+0x147/0x160 [ipv6] [<ffffffffa01f4ba3>] ip6_rcv_finish+0x7c/0x81 [ipv6] [<ffffffffa01f5397>] ipv6_rcv+0x3a1/0x3e2 [ipv6] [<ffffffff8151ef96>] __netif_receive_skb_core+0x4ab/0x511 [<ffffffff810fdc94>] ? mark_held_locks+0x71/0x99 [<ffffffff8151f0c0>] ? process_backlog+0x69/0x15e [<ffffffff8151f045>] __netif_receive_skb+0x49/0x5b [<ffffffff8151f0cf>] process_backlog+0x78/0x15e [<ffffffff8151f571>] ? net_rx_action+0x1a2/0x1cc [<ffffffff8151f47b>] net_rx_action+0xac/0x1cc [<ffffffff810c69b7>] ? __do_softirq+0xad/0x218 [<ffffffff810c69ff>] __do_softirq+0xf5/0x218 [<ffffffff815ddafc>] do_softirq_own_stack+0x1c/0x30 <EOI> [<ffffffff810c6bb6>] do_softirq+0x38/0x5d [<ffffffffa01f1d5b>] ? ip6_copy_metadata+0x156/0x156 [ipv6] [<ffffffff810c6c78>] __local_bh_enable_ip+0x9d/0xd9 [<ffffffffa01f1d88>] rcu_read_unlock_bh+0x2d/0x2f [ipv6] [<ffffffffa01f28b4>] ip6_finish_output2+0x381/0x3d8 [ipv6] [<ffffffffa01f49ef>] ip6_finish_output+0x6e/0x73 [ipv6] [<ffffffffa01f4a70>] ip6_output+0x7c/0xa8 [ipv6] [<ffffffff815b1bfa>] dst_output+0x18/0x1c [<ffffffff815b1c9e>] ip6_local_out+0x1c/0x21 [<ffffffffa01f2489>] ip6_push_pending_frames+0x37d/0x427 [ipv6] [<ffffffff81558af8>] ? skb_orphan+0x39/0x39 [<ffffffffa020b85a>] ? rawv6_sendmsg+0x74b/0xa4d [ipv6] [<ffffffffa020ba51>] rawv6_sendmsg+0x942/0xa4d [ipv6] [<ffffffff81584cd2>] inet_sendmsg+0x3d/0x66 [<ffffffff81508930>] __sock_sendmsg_nosec+0x25/0x27 [<ffffffff8150b0d7>] sock_sendmsg+0x5a/0x7b [<ffffffff810fd8dc>] ? lock_release+0x14e/0x17b [<ffffffff8116d756>] ? might_fault+0x9e/0xa5 [<ffffffff8116d70d>] ? might_fault+0x55/0xa5 [<ffffffff81508cb1>] ? copy_from_user+0x2a/0x2c [<ffffffff8150b70c>] ___sys_sendmsg+0x226/0x2d9 [<ffffffff810fcd25>] ? __lock_acquire+0x5ee/0xe48 [<ffffffff810fde01>] ? trace_hardirqs_on_caller+0x145/0x1a1 [<ffffffff8118efcb>] ? slab_free_hook.isra.71+0x50/0x59 [<ffffffff8115c81f>] ? release_pages+0xbc/0x181 [<ffffffff810fd99d>] ? lock_acquire+0x94/0x9d [<ffffffff81115e97>] ? read_seqcount_begin.constprop.25+0x73/0x90 [<ffffffff8150c408>] __sys_sendmsg+0x3d/0x5b [<ffffffff8150c433>] SyS_sendmsg+0xd/0x19 [<ffffffff815dc53d>] system_call_fastpath+0x1a/0x1f Reported-by: NBen Greear <greearb@candelatech.com> Cc: Casey Leedom <leedom@chelsio.com> Cc: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NLi RongQing <roy.qing.li@gmail.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NCasey Leedom <leedom@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy Adamson 提交于
Fix nfs4_negotiate_security to create an rpc_clnt used to test each SECINFO returned pseudoflavor. Check credential creation (and gss_context creation) which is important for RPC_AUTH_GSS pseudoflavors which can fail for multiple reasons including mis-configuration. Don't call nfs4_negotiate in nfs4_submount as it was just called by nfs4_proc_lookup_mountpoint (nfs4_proc_lookup_common) Signed-off-by: NAndy Adamson <andros@netapp.com> [Trond: fix corrupt return value from nfs_find_best_sec()] Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Andy Adamson 提交于
Do not return RPC_AUTH_UNIX if SEINFO reply tests fail. This prevents an infinite loop of NFS4ERR_WRONGSEC for non RPC_AUTH_UNIX mounts. Without this patch, a mount with no sec= option to a server that does not include RPC_AUTH_UNIX in the SECINFO return can be presented with an attemtp to use RPC_AUTH_UNIX which will result in an NFS4ERR_WRONG_SEC which will prompt the SECINFO call which will again try RPC_AUTH_UNIX.... Signed-off-by: NAndy Adamson <andros@netapp.com> Tested-By: NSteve Dickson <steved@redhat.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Andy Adamson 提交于
Signed-off-by: NAndy Adamson <andros@netapp.com> Tested-By: NSteve Dickson <steved@redhat.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Trond Myklebust 提交于
Now that we have functions such as nfs_write_pageuptodate() that use the cache_validity flags to check if the data cache is valid or not, it is a little more important to keep the flags in sync with the state of the data cache. In particular, we'd like to ensure that if the data cache is empty, we don't start marking it as needing revalidation. Reported-by: NScott Mayhew <smayhew@redhat.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Trond Myklebust 提交于
In nfs_update_inode(), if the change attribute is seen to change on the server, then we set NFS_INO_REVAL_PAGECACHE in order to make sure that we check the file size. However, if we also update the file size in the same function, we don't need to check it again. So make sure that we clear the NFS_INO_REVAL_PAGECACHE that was set earlier. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-