- 12 12月, 2009 3 次提交
-
-
由 H. Peter Anvin 提交于
Add documentation for kernel/bootloader_type and kernel/bootloader_version to sysctl/kernel.txt. This should really have been done a long time ago. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: Shen Feng <shen@cn.fujitsu.com>
-
由 Borislav Petkov 提交于
The current rd/wrmsr_on_cpus helpers assume that the supplied cpumasks are contiguous. However, there are machines out there like some K8 multinode Opterons which have a non-contiguous core enumeration on each node (e.g. cores 0,2 on node 0 instead of 0,1), see http://www.gossamer-threads.com/lists/linux/kernel/1160268. This patch fixes out-of-bounds writes (see URL above) by adding per-CPU msr structs which are used on the respective cores. Additionally, two helpers, msrs_{alloc,free}, are provided for use by the callers of the MSR accessors. Cc: H. Peter Anvin <hpa@zytor.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Aristeu Rozanski <aris@redhat.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Doug Thompson <dougthompson@xmission.com> Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com> LKML-Reference: <20091211171440.GD31998@aftab> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 H. Peter Anvin 提交于
-
- 11 12月, 2009 12 次提交
-
-
由 Yinghai Lu 提交于
Jens found the following crash/regression: [ 0.000000] found SMP MP-table at [ffff8800000fdd80] fdd80 [ 0.000000] Kernel panic - not syncing: Overlapping early reservations 12-f011 MP-table mpc to 0-fff BIOS data page and [ 0.000000] Kernel panic - not syncing: Overlapping early reservations 12-f011 MP-table mpc to 6000-7fff TRAMPOLINE and bisected it to b24c2a92 ("x86: Move find_smp_config() earlier and avoid bootmem usage"). It turns out the BIOS is using the first 64k for mptable, without reserving it. So try to find good range for the real-mode trampoline instead of hard coding it, in case some bios tries to use that range for sth. Reported-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NYinghai Lu <yinghai@kernel.org> Tested-by: NJens Axboe <jens.axboe@oracle.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> LKML-Reference: <4B21630A.6000308@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (189 commits) drm/radeon/kms: fix warning about cur_placement being uninitialised. drm/ttm: Print debug information on memory manager when eviction fails drm: Add memory manager debug function drm/radeon/kms: restore surface registers on resume. drm/radeon/kms/r600/r700: fallback gracefully on ucode failure drm/ttm: Initialize eviction placement in case the driver callback doesn't drm/radeon/kms: cleanup structure and module if initialization fails drm/radeon/kms: actualy set the eviction placements we choose drm/radeon/kms: Fix NULL ptr dereference drm/radeon/kms/avivo: add support for new pll selection algo drm/radeon/kms/avivo: fix some bugs in the display bandwidth setup drm/radeon/kms: fix return value from fence function. drm/radeon: Remove tests for -ERESTART from the TTM code. drm/ttm: Have the TTM code return -ERESTARTSYS instead of -ERESTART. drm/radeon/kms: Convert radeon to new TTM validation API (V2) drm/ttm: Rework validation & memory space allocation (V3) drm: Add search/get functions to get a block in a specific range drm/radeon/kms: fix avivo tiling regression since radeon object rework drm/i915: Remove a debugging printk from hangcheck drm/radeon/kms: make sure i2c id matches ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (21 commits) amd64_edac: bump driver version amd64_edac: fix use-uninitialised bug amd64_edac: correct sys address to chip select mapping amd64_edac: add a leaner syndrome decoding algorithm amd64_edac: remove early hw support check amd64_edac: detect DDR3 memory type edac: add memory types strings for debugging edac, mce: update AMD F10h revD check amd64_edac: remove unneeded extract_error_address wrapper amd64_edac: rename StinkyIdentifier amd64_edac: remove superfluous dbg printk amd64_edac: enhance address to DRAM bank mapping amd64_edac: cleanup f10_early_channel_count amd64_edac: dump DIMM sizes on K8 too amd64_edac: cleanup rest of amd64_dump_misc_regs amd64_edac: cleanup DRAM cfg low debug output amd64_edac: wrap-up pci config read error handling amd64_edac: unify MCGCTL ECC switching cpumask: use modern cpumask style in drivers/edac/amd64_edac.c amd64_edac: make DRAM regions output more human-readable ...
-
git://gitorious.org/linux-omap-dss2/linux由 Linus Torvalds 提交于
* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: MAINTAINERS: Add OMAP2/3 DSS and OMAPFB maintainer OMAP: SDP: Enable DSS2 for OMAP3 SDP board OMAP: DSS2: Taal DSI command mode panel driver OMAP: DSS2: Add generic and Sharp panel drivers OMAP: DSS2: omapfb driver OMAP: DSS2: DSI driver OMAP: DSS2: SDI driver OMAP: DSS2: RFBI driver OMAP: DSS2: Video encoder driver OMAP: DSS2: DPI driver OMAP: DSS2: DISPC OMAP: DSS2: Add more core files OMAP: DSS2: Display Subsystem Driver core OMAP: DSS2: Documentation for DSS2 OMAP: Add support for VRFB rotation engine OMAP: Add VRAM manager OMAP: OMAPFB: add omapdss device OMAP: OMAPFB: split omapfb.h OMAP2: Add funcs for writing SMS_ROT_* registers
-
由 Prarit Bhargava 提交于
The per_cpu cpuid4_info shared_map can contain stale data when CPUs are added and removed. The stale data can lead to a NULL pointer derefernce panic on a remove of a CPU that has had siblings previously removed. This patch resolves the panic by verifying a cpu is actually online before adding it to the shared_cpu_map, only examining cpus that are part of the same lower level cache, and by updating other siblings lowest level cache maps when a cpu is added. Signed-off-by: NPrarit Bhargava <prarit@redhat.com> LKML-Reference: <20091209183336.17855.98708.sendpatchset@prarit.bos.redhat.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Add debugobjects support
-
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen由 Linus Torvalds 提交于
* 'bugfix' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: xen: try harder to balloon up under memory pressure. Xen balloon: fix totalram_pages counting. xen: explicitly create/destroy stop_machine workqueues outside suspend/resume region. xen: improve error handling in do_suspend. xen: don't leak IRQs over suspend/resume. xen: call clock resume notifier on all CPUs xen: use iret for return from 64b kernel to 32b usermode xen: don't call dpm_resume_noirq() with interrupts disabled. xen: register runstate info for boot CPU early xen: register runstate on secondary CPUs xen: register timer interrupt with IRQF_TIMER xen: correctly restore pfn_to_mfn_list_list after resume xen: restore runstate_info even if !have_vcpu_info_placement xen: re-register runstate area earlier on resume. xen: wait up to 5 minutes for device connetion xen: improvement to wait_for_devices() xen: fix is_disconnected_device/exists_disconnected_device xen/xenbus: make DEVICE_ATTR()s static
-
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen由 Linus Torvalds 提交于
* 'xen/fbdev' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: xen pvfb: Inhibit VM_IO flag to be set on vmalloc-ed framebuffers. fb-defio: Inhibit VM_IO flag to be set on vmalloc-ed framebuffers. fb-defio: If FBINFO_VIRTFB is defined, do not set VM_IO flag. Fix toogle whether xenbus driver should be built as module or part of kernel.
-
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm: dlm: always use GFP_NOFS
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (47 commits) ext4: Fix potential fiemap deadlock (mmap_sem vs. i_data_sem) ext4: Do not override ext2 or ext3 if built they are built as modules jbd2: Export jbd2_log_start_commit to fix ext4 build ext4: Fix insufficient checks in EXT4_IOC_MOVE_EXT ext4: Wait for proper transaction commit on fsync ext4: fix incorrect block reservation on quota transfer. ext4: quota macros cleanup ext4: ext4_get_reserved_space() must return bytes instead of blocks ext4: remove blocks from inode prealloc list on failure ext4: wait for log to commit when umounting ext4: Avoid data / filesystem corruption when write fails to copy data ext4: Use ext4 file system driver for ext2/ext3 file system mounts ext4: Return the PTR_ERR of the correct pointer in setup_new_group_blocks() jbd2: Add ENOMEM checking in and for jbd2_journal_write_metadata_buffer() ext4: remove unused parameter wbc from __ext4_journalled_writepage() ext4: remove encountered_congestion trace ext4: move_extent_per_page() cleanup ext4: initialize moved_len before calling ext4_move_extents() ext4: Fix double-free of blocks with EXT4_IOC_MOVE_EXT ext4: use ext4_data_block_valid() in ext4_free_blocks() ...
-
git://git.open-osd.org/linux-open-osd由 Linus Torvalds 提交于
* 'for-linus' of git://git.open-osd.org/linux-open-osd: exofs: Multi-device mirror support exofs: Move all operations to an io_engine exofs: move osd.c to ios.c exofs: statfs blocks is sectors not FS blocks exofs: Prints on mount and unmout exofs: refactor exofs_i_info initialization into common helper exofs: dbg-print less exofs: More sane debug print trivial: some small fixes in exofs documentation
-
git://git.infradead.org/ubifs-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/ubifs-2.6: UBIFS: fix return code in check_leaf UBI: flush wl before clearing update marker MAINTAINERS: change e-mail of Artem Bityutskiy UBIFS: remove manual O_SYNC handling UBIFS: support mounting of UBI volume character devices UBI: Add ubi_open_volume_path
-
- 10 12月, 2009 25 次提交
-
-
由 David Wong 提交于
This patch drops usage of floating point variable for 32bit build Signed-off-by: NDavid T. L. Wong <davidtlwong@gmail.com> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Ingo Molnar 提交于
Merge branch 'amd-iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu into x86/urgent
-
由 Joerg Roedel 提交于
The device change notifier is initialized in the dma_ops initialization path. But this path is never executed for iommu=pt. Move the notifier initialization to IOMMU hardware init code to fix this. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
The data structure changes to use dev->archdata.iommu field broke the iommu=pt mode because in this case the dev->archdata.iommu was left uninitialized. This moves the inititalization of the devices into the main init function and fixes the problem. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Boaz Harrosh 提交于
This patch changes on-disk format, it is accompanied with a parallel patch to mkfs.exofs that enables multi-device capabilities. After this patch, old exofs will refuse to mount a new formatted FS and new exofs will refuse an old format. This is done by moving the magic field offset inside the FSCB. A new FSCB *version* field was added. In the future, exofs will refuse to mount unmatched FSCB version. To up-grade or down-grade an exofs one must use mkfs.exofs --upgrade option before mounting. Introduced, a new object that contains a *device-table*. This object contains the default *data-map* and a linear array of devices information, which identifies the devices used in the filesystem. This object is only written to offline by mkfs.exofs. This is why it is kept separate from the FSCB, since the later is written to while mounted. Same partition number, same object number is used on all devices only the device varies. * define the new format, then load the device table on mount time make sure every thing is supported. * Change I/O engine to now support Mirror IO, .i.e write same data to multiple devices, read from a random device to spread the read-load from multiple clients (TODO: stripe read) Implementation notes: A few points introduced in previous patch should be mentioned here: * Special care was made so absolutlly all operation that have any chance of failing are done before any osd-request is executed. This is to minimize the need for a data consistency recovery, to only real IO errors. * Each IO state has a kref. It starts at 1, any osd-request executed will increment the kref, finally when all are executed the first ref is dropped. At IO-done, each request completion decrements the kref, the last one to return executes the internal _last_io() routine. _last_io() will call the registered io_state_done. On sync mode a caller does not supply a done method, indicating a synchronous request, the caller is put to sleep and a special io_state_done is registered that will awaken the caller. Though also in sync mode all operations are executed in parallel. Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
-
由 Boaz Harrosh 提交于
In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
-
由 Boaz Harrosh 提交于
If I do a "git mv" together with a massive code change and commit in one patch, git looses the rename and records a delete/new instead. This is bad because I want a rename recorded so later rebased/cherry-picked patches to the old name will work. Also the --follow is lost. Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
-
由 Boaz Harrosh 提交于
Even though exofs has a 4k block size, statfs blocks is in sectors (512 bytes). Also if target returns 0 for capacity then make it ULLONG_MAX. df does not like zero-size filesystems Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
-
由 Boaz Harrosh 提交于
It is important to print in the logs when a filesystem was mounted and eventually unmounted. Print the osd-device's osd_name and pid the FS was mounted/unmounted on. TODO: How to also print the namespace path the filesystem was mounted on? Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
-
由 Boaz Harrosh 提交于
There are two places that initialize inodes: exofs_iget() and exofs_new_inode() As more members of exofs_i_info that need initialization are added this code will grow. (soon) Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
-
由 Boaz Harrosh 提交于
Iner-loops printing is converted to EXOFS_DBG2 which is #defined to nothing. It is now almost bareable to just leave debug-on. Every operation is printed once, with most relevant info (I hope). Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
-
由 Boaz Harrosh 提交于
debug prints should be somewhat useful without actually reading the source code Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
-
Add exofs.txt to filesystems Documentation index and fix some typos, identation and grammar. Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
-
由 Joe Perches 提交于
- Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - Remove #define NAME - Remove NAME from pr_<level> Signed-off-by: NJoe Perches <joe@perches.com> LKML-Reference: <009cb214c45ef932df0242856228f4739cc91408.1260383912.git.joe@perches.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Joe Perches 提交于
- Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - Strip "kmmio: " from pr_<level>s Signed-off-by: NJoe Perches <joe@perches.com> LKML-Reference: <7aa509f8a23933036d39f54bd51e9acc52068049.1260383912.git.joe@perches.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Joe Perches 提交于
- Add pr_fmt(fmt) "pit: " fmt - Strip pit: prefixes from pr_debug Signed-off-by: NJoe Perches <joe@perches.com> LKML-Reference: <bbd4de532f18bb7c11f64ba20d224c08291cb126.1260383912.git.joe@perches.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Joe Perches 提交于
- Added #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - Stripped PERCPU: from a pr_warning Signed-off-by: NJoe Perches <joe@perches.com> LKML-Reference: <7ead24eccbea8f2b11795abad3e2893a98e1e111.1260383912.git.joe@perches.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Joe Perches 提交于
- Added #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - Converted a few printk(KERN_INFO to pr_info( - Stripped "es7000_mipcfg" from pr_debug Signed-off-by: NJoe Perches <joe@perches.com> LKML-Reference: <3b4375af246dec5941168858910210937c110af9.1260383912.git.joe@perches.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Dave Airlie 提交于
Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
This merges some TTM overhauls to allow us to do better object placement for certain radeon GPUs that need scanout+cursor within range of each other, along with an API change to not return ERESTART to userspace, but to use ERESTARTSYS properly internally and have it convert to EINTR and catch that correctly. Also lots of radeon fixes across the board.
-
由 Dave Airlie 提交于
Pull more Intel changes in, especially one to init the GTT properly
-
由 Jerome Glisse 提交于
This add helper function to print information on eviction placements and memory manager status when eviction fails to allocate memory space. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
drm_mm_debug_table will print the memory manager state in table allowing to give a snapshot of the manager at given point in time. Usefull for debugging. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
On resume on my rv530 laptop surface cntl was left disabled, so wierd stuff would happen with rendering to a tiled front buffer. This checks if the surface regs are assigned to bos and reprograms the surface registers on resume using the same path that clears them all on init. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Sent the wrong patch earlier. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-