Store the struct block_device while device is frozen, saving us one call to
bdget_disk().
Signed-Off-By: NAlasdair G Kergon <agk@redhat.com>
From: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Attached is a patch to bttv which fixes the following problems.

Affected cards and problems:
~~~~~~~~~~~~~~~~~~~~~~~~
o VP-1020 (200103A) Tuning problems, device detection.
o VP-1020 (DST-MOT) Errors during tuning, device detection fails in a while.
o VP-1030 (DST-CI) Tuning sometimes fails after CI commands.
o VP-2031 (DCT-CI) Tuning problems

The timeout happens before the actual timeout occured in the MCU
on the board, and hence the problems.

Changes: (bttv-i2c.diff)
~~~~~~~~~~~~~~~~~~~~~~~~
o Changed the custom wait queue to wait_event_interruptible_timeout()
      - Suggestion by Johannes Stezenbach.

o Fixed the wait queue timeout problem
      - This fixes the timeout problem on various cards.
      - This problem was visible as many
          * Cannot tune to channels, when signal levels are very low.
          * app_info does not work in some conditions for CI based cards
      - Smaller values worked good for newer cards, but the older cards
suffered, settled down to the worst case values that could happen in any
eventuality.
Signed-off-by: NManu Abraham <manu@kromtek.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The only caller that ever sets it can call fsync_bdev itself easily.  Also
update some comments.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds support for a new class of DAC960 controllers.  It's based
on the GPLed idac320 driver from IBM for Linux 2.4.18.  That driver is a
fork of the 2.4.18 version of DAC960 that adds support for this new type of
controllers (internally called "GEM Series"), that differ from other DAC960
V2 firmware controllers only in the register offsets and removes support
for all others.

This patch instead integrates support for these controllers into the DAC960
driver.

Thanks to Anders Norrbring for pointing me to the idac320 driver and
testing this patch.

No Signed-Off: line because all code is either copy & pasted from IBM's
idac320 driver or support for other controllers in the 2.6 DAC960 driver.

Note: the really odd formating matches the rest of the DAC960 driver.

Cc: Dave Olien <dmo@osdl.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make sure that if the INTRTIE bit is set both functions of the cardbus
bridge use the same IRQ before doing any probing...

[ yes i hate the TI bridges for the fact that they are very flexible
  so that so many BIOS vendors get it wrong. ]
Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Enable 32-bit memory windows on pd6729 PCI-PCMCIA bridges.
Signed-off-by: NJarkko Raja <jar@pcuf.fi>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch handles the VIDIOC_S_FMT and VIDIOC_G_FMT ioctls for the
saa6752hs.

As only 4 preset video formats are supported (SIF, 1/2D1, 2/3D1, D1), we
compute to which the asked resolution is the nearest and apply it.
Signed-off-by: NFrederic Cand <frederic.cand@anevia.com>
Acked-by: NGerd Knorr <kraxel@bytesex.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Has lots of callsites.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

These three functions are referenced from the __devinitdata
sis5513_chipset.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

During a warm boot the device is in D3 and has troubles coming out of it.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tg3_stop_block() errors can be safely ignored since tg3_chip_reset()
always follows tg3_stop_block() calls.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

this matches the API used by other link layer like ethernet or token
ring.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With 2.6.11 and 2.6.12-rc2 (and perhaps a few versions before) usb
drivers for multi-interface devices, which do
usb_driver_release_interface() in their disconnect(), make rmmod hang.

It turns out to be due to a bug in drivers/base/bus.c:driver_detach(),
that iterates over the list of attached devices with
list_for_each_safe() under an assumption that device_release_driver()
only releases the current device, while it may also call
device_release_driver() for other devices on the same list.

The following patch fixes it.  Please consider applying.
Signed-off-by: NRoman Kagan <rkagan@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Earlier in the same function dev->bus is checked before dereferenced,
make consistent although I honestly don't know if dev->bus could
ever be NULL

Found by the Coverity tool
Signed-off-by: NAlexander Nyberg <alexn@dsv.su.se>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

[hv]sync[12] are __initdata, causing mplayer to oops with the previous i810fb fix.

My fault, this fixes it. Sorry.
Signed-off-by: NLinux Torvalds <torvalds@osdl.org>

annotated, a bunch of direct dereferencing replaced with readb().
Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

 * net/irda/irda_device.c::irda_setup_dma() made conditional on
   ISA_DMA_API (it uses helpers in question and irda is usable on
   platforms that don't have them at all - think of USB IRDA, for
   example).
 * irda drivers that depend on ISA DMA marked as dependent on
   ISA_DMA_API
Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Drivers that expect ISA DMA API are marked as such in Kconfig.
Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Part of parport_pc that uses ISA DMA helpers made conditional on
CONFIG_ISA_DMA_API.  As the result, driver got usable for boxen that do
not have ISA DMA stuff and have normal PCI parport card stuck into
them - these never use DMA anyway.
Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

pci_dac_set_dma_mask is currently completely unused.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

I fogot to remove the code that freed the memory in cleanup_slots().
Here is the new patch, which I have also taken care of the comment
by Eike to remove the cast in hotplug_slot->private.
Signed-off-by: NDely Sy <dely.l.sy@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Here are some spelling corrections for drivers/pci.

CONTROLER -> CONTROLLER
Regisetr -> Register
harware -> hardware
inital -> initial
Initilize -> Initialize
funtion -> function
funciton -> function
occured -> occurred
Signed-off-by: NSteven Cole <elenstev@mesatop.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch just adds Intel's Hance Rapid south bridge IDs to ICH4 region quirk.
Patch was successfuly tested by Chunhao Huang from Winbond.
Signed-Off-By: NRudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

here is the patch that fixes the bug introduced by my previous patch which
already went into 2.6.12-rc2 and is likely to cause trouble is someone hits
one the else case here by accident.

Using the &= operation before the if statement destroys the information the
if asks for so we always go into the else branch.
Signed-off-by: NRolf Eike Beer <eike-hotplug@sf-tec.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Now pci drivers can know when the system is going down without having to
add a reboot notifier event.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds the possibility to do word-aligned 16-bit atomic PCI
configuration space accesses via the sysfs PCI interface. As a result, problems
with Emulex LFPC on IBM PowerPC64 are fixed.

Patch is present in SLES 9 SP1.
Signed-off-by: NVojtech Pavlik <vojtech@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

I think 'is_enabled' flag in pci_dev structure should be set/cleared
when the device actually enabled/disabled. Especially about
pci_enable_device(), it can be failed. By this change, we will also
get the possibility of refering 'is_enabled' flag from the functions
called through pci_enable_device()/pci_disable_device().
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

update version number to 10
Signed-off-by: NEd L. Cashin <ecashin@coraid.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

add firmware version to info in sysfs
Signed-off-by: NEd L. Cashin <ecashin@coraid.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

allow multiple aoe devices to have the same mac
Signed-off-by: NEd L. Cashin <ecashin@coraid.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

diff -u b/drivers/block/aoe/aoedev.c b/drivers/block/aoe/aoedev.c

improve allowed interfaces configuration
Signed-off-by: NEd L. Cashin <ecashin@coraid.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

diff -uprN a/Documentation/aoe/aoe.txt b/Documentation/aoe/aoe.txt

Fixed problem where setting or retreiving the serial config would fail
with EPIPE.  Removed CRTS toggling so the driver behaves more like other
usbserial adapters.  Issued new interval of 1ms instead of the default
bInterval.  As a result, transfer speed has been substantially
increased.  From avg. 850bps to avg. 3300bps.  Also added new module
parameter 'interval' to tweak the interval in case this change causes
problems for someone.  Cleaned up code and formatting issues so source
is more readable.  Replaced the C++ style comments.  Various other code
cleanups.
Signed-off-by: NLonnie Mendez <lmendez19@austin.rr.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Here are some spelling corrections for drivers/usb.

cancelation -> cancellation
succesful -> successful
cancelation -> cancellation
decriptor -> descriptor
Initalize -> Initialize
wierd -> weird
Protocoll -> Protocol
occured -> occurred
successfull -> successful
Procesing -> Processing
devide -> divide
Isochronuous -> Isochronous
noticable -> noticeable
Basicly -> Basically
transfering -> transferring
intialize -> initialize
Incomming -> Incoming
additionnal -> additional
asume -> assume
Unfortunatly -> Unfortunately
retreive -> retrieve
tranceiver -> transceiver
Compatiblity -> Compatibility
Incorprated -> Incorporated
existance -> existence
Ununsual -> Unusual
Signed-off-by: NSteven Cole <elenstev@mesatop.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds an unusual_devs entry for the Minolta Dimage Z10.
Originally reported by Vilisas <vilisas@xxx.lt>
Signed-off-by: NPhil Dibowitz <phil@ipom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NPhil Dibowitz <phil@ipom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>