1. 13 5月, 2008 14 次提交
  2. 12 5月, 2008 26 次提交
    • H
      types: s390: fix #ifdef reversal in <asm-s390/types.h> · 2ccdcfee
      H. Peter Anvin 提交于
      The #ifdef for the integer types was reversed; the standard pattern in
      these files are:
      
      #ifndef __s390x__
      /* 32-bit code */
      #else
      /* 64-bit code */
      #endif
      
      Stick with the original pattern, but make sure the 32-bit code
      actually comes first!
      
      Reported by Al Viro.
      Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: Al Viro <viro@zeniv.linux.org.uk>
      2ccdcfee
    • S
      cb0e8b0f
    • T
      [MIPS] Fix build failure in mips oprofile code · 005ca9a3
      Thiemo Seufer 提交于
      This patch fixes a warning-as-error induced build failure of 64bit MIPS
      kernels.
      Signed-off-by: NThiemo Seufer <ths@networkno.de>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      005ca9a3
    • T
      [MIPS] fix warning message on SMP kernels · 83738e30
      Thiemo Seufer 提交于
      This patch fixes a (harmless) warning message.
      Signed-off-by: NThiemo Seufer <ths@networkno.de>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      83738e30
    • A
      [MIPS] markeins: build fix · b01273f1
      Adrian Bunk 提交于
      This patch fixes the following build errror caused by
      commit 7dffa3c6
      (ntp: handle leap second via timer):
      
      <--  snip  -->
      
      ...
        CC      arch/mips/emma2rh/markeins/setup.o
      /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/emma2rh/markeins/setup.c:79: error: conflicting types for 'clock'
      /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/clocksource.h:96: error: previous declaration of 'clock' was here
      make[2]: *** [arch/mips/emma2rh/markeins/setup.o] Error 1
      
      <--  snip  -->
      
      [Ralf: reformated to 80 colums after the fix and marked emma2rh_clock as
      __initdata]
      Signed-off-by: NAdrian Bunk <bunk@kernel.org>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      b01273f1
    • C
    • R
      [MIPS] Get rid of __ilog2 · ddc0d009
      Ralf Baechle 提交于
      56a6b1eb was a bit too conservative and
      left __ilog2 around which is only used as an internal function for other
      bitops.
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      ddc0d009
    • T
      [MIPS] Fix __fls for non-MIPS32/MIPS64 cpus · fcd84f2f
      Thomas Bogendoerfer 提交于
      Only MIPS32 and MIPS64 CPUs implement clz/dclz. Therefore don't export
      __ilog2() for non MIPS32/MIPS64 cpus and use generic __fls bitop code for
      these cpus.
      Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      fcd84f2f
    • S
      [MIPS] XXS1500 code style cleanup · 7ff83f21
      Sergei Shtylyov 提交于
      Fix several errors and warnings given by checkpatch.pl:
      
      - use of C99 // comments;
      
      - using simple_strtol() where strict_strtol() could be used.
      
      In addition to these changes, also do the following:
      
      - remove needless parentheses;
      
      - remove unneeded numeric literal type cast;
      
      - insert spaces between operator and its operands;
      
      - remove excess new lines;
      
      - remove space after the type cast's closing parenthesis;
      
      - insert missing space before closing brace in the structure initializer;
      
      - fix typos, capitalize acronyms, etc. in the comments;
      
      - update MontaVista copyright;
      
      - remove Pete Popov's old email address...
      Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      7ff83f21
    • S
      [MIPS] MTX-1 code style cleanup · 1ff1a78c
      Sergei Shtylyov 提交于
      Fix many errors and warnings given by checkpatch.pl:
      
      - space after opening and before closing parentheses;
      
      - use of C99 // comments;
      
      - leading spaces instead of tabs;
      
      - brace not on the same line with 'else' in the 'if' statement;
        statement;
      
      - printk() without KERN_* facility level;
      
      - using simple_strtol() where strict_strtol() could be used.
      
      - including <asm/gpio.h> instead of <linux/gpio.h>.
      
      In addition to these changes, also do the following:
      
      - insert spaces between operator and its operands;
      
      - replace tab between the function type and name with space in
        mtx1_pci_idsel() declaration;
      
      - remove space after the type cast's closing parenthesis;
      
      - insert missing space before closing brace in the array/structure
        initializers;
      
      - update MontaVista copyright;
      
      - remove Pete Popov's old email address...
      Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      1ff1a78c
    • S
      [MIPS] Pb1200/DBAu1200 code style cleanup · c3d1d5c8
      Sergei Shtylyov 提交于
      Fix several errors and warnings given by checkpatch.pl:
      
      - use of C99 // comments;
      
      - initialization of a 'static' variable to 0;
      
      - space after opening and before closing parentheses;
      
      - missing space between 'for' and opening parenthesis;
      
      - macros with complex values not enclosed in parentheses;
      
      - printk() without KERN_* facility level;
      
      - unnecessary braces for single-statement block;
      
      - using simple_strtol() where strict_strtol() could be used;
      
      - line over 80 characters.
      
      In addition to these changes, also do the following:
      
      - mention DBAu1200 board in the Makefile;
      
      - replace the group of #include/#ifdef directives by a single
        #include <au1xxx.h> since this header contains the needed stuff;
      
      - properly indent the blocks;
      
      - insert spaces between operator and its operands, remove excess spaces
        there;
      
      - remove needless parentheses and add some for clarity;
      
      - replace numeric literals/expressions with the matching macros;
      
      - remove space after the type cast's closing parenthesis;
      
      - reduce pb1200_setup_cascade() to the single 'return' statement;
      
      - reduce the number of printed empty lines in the so-called CPLD
        workaround;
      
      - remove #undef AU1X00_EXTERNAL_INT since that macro is not defined
        anywhere;
      
      - replace spaces after the macro name with tabs in the #define directives;
      
      - remove excess tabs after the macro name in the #define directives;
      
      - fix typo in the BCSR_RESETS_PWMR1mUX macro's name;
      
      - group all Pb1200 PCMCIA definitions together;
      
      - put the function's result type and name/parameters on the same line;
      
      - insert missing and remove excess new lines;
      
      - make the multi-line comment style consistent with the kernel style
        elsewhere by adding empty first line and/or adding space/asterisk on
        their left side;
      
      - fix typos/errors, capitalize acronyms, etc. in the comments;
      
      - combine some comments;
      
      - update MontaVista copyright;
      
      - remove Pete Popov's old email address...
      Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      c3d1d5c8
    • S
      [MIPS] Pb1550 code style cleanup · 6afabe6c
      Sergei Shtylyov 提交于
      Fix a few errors and warnings given by checkpatch.pl:
      
      - macros with complex values not enclosed in parentheses;
      
      - printk() without KERN_* facility level;
      
      - unnecessary braces for single-statement block;
      
      - using simple_strtol() where strict_strtol() could be used.
      
      In addition to these changes, also do the following:
      
      - replace numeric literals with the matching macros;
      
      - properly indent the code and the array initializers;
      
      - insert spaces between operator and its operands, also remove excess spaces
        there;
      
      - remove space after the type cast's closing parenthesis;
      
      - insert missing space before closing brace in the array initializers;
      
      - replace spaces after the macro name with tabs in the #define directives, also
        sometimes insert space there for better looks;
      
      - remove excess tabs after the macro name in the #define directives;
      
      - fix typos/errors, capitalize acronyms, etc. in the comments;
      
      - make the multi-line comment style consistent with the kernel style elsewhere
        by adding empty first line;
      
      - update MontaVista copyright;
      
      - remove Pete Popov's old email address...
      Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      6afabe6c
    • S
      [MIPS] Pb1500 code style cleanup · 2091a17f
      Sergei Shtylyov 提交于
      Fix several errors and warnings given by checkpatch.pl:
      
      - use of C99 // comments;
      
      - printk() without KERN_* facility level;
      
      - unnecessary braces for single-statement block;
      
      - using simple_strtol() where strict_strtol() could be used.
      
      In addition to these changes, also do the following:
      
      - replace numeric literals/expressions with the matching macros;
      
      - insert spaces between operator and its operands;
      
      - properly indent the code and the array initializers;
      
      - remove useless #if dirctive from board_setup();
      
      - remove needless parentheses;
      
      - remove unneeded type casts;
      
      - remove excess new lines;
      
      - make hexadecimal literals all lower case;
      
      - remove space after the type cast's closing parenthesis;
      
      - insert missing space before closing brace in the array initializers;
      
      - replace spaces after the macro name with tabs in the #define directives,
        also sometimes insert space there for better looks;
      
      - fix typos/errors, capitalize acronyms, etc. in the comments;
      
      - update MontaVista copyright;
      
      - remove Pete Popov's old email address...
      Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      2091a17f
    • S
      [MIPS] Pb1100 code style cleanup · be1c3c1e
      Sergei Shtylyov 提交于
      Fix several errors and warnings given by checkpatch.pl:
      
      - space between asterisk and variable name;
      
      - use of C99 // comments;
      
      - using simple_strtol() where strict_strtol() could be used.
      
      In addition to these changes, also do the following:
      
      - properly indent the code;
      
      - remove space after the type cast's closing parenthesis;
      
      - replace numeric literals/expressions with the matching macros;
      
      - replace spaces after the macro name with tabs in the #define directives,
        and sometimes insert spaces there;
      
      - fix typos/errors, capitalize acronyms, etc. in the comments;
      
      - make the multi-line comment style consistent with the kernel style
        elsewhere by adding empty first line;
      
      - update MontaVista copyright;
      
      - remove Pete Popov's old email address...
      Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      be1c3c1e
    • S
      [MIPS] Pb1000 code style cleanup · 7916c354
      Sergei Shtylyov 提交于
      Fix several errors and warnings given by checkpatch.pl:
      
      - use of C99 // comments;
      
      - brace not on the same line with condition in the 'switch' statement;
      
      - printk() without KERN_* facility level;
      
      - unnecessary braces for single-statement block;
      
      - using simple_strtol() where strict_strtol() could be used.
      
      In addition to these changes, also do the following:
      
      - properly indent the 'switch' statement;
      
      - remove needless parentheses;
      
      - insert spaces between operator and its operands;
      
      - replace numeric literals/expressions with the matching macros;
      
      - remove useless #if dirctive from board_setup();
      
      - remove unneeded numeric literal type casts;
      
      - remove space after the type cast's closing parenthesis;
      
      - replace spaces after the macro name with tabs in the #define directives, and
        sometimes insert spaces there;
      
      - remove excess new lines;
      
      - fix typos/errors, capitalize acronyms, etc. in the comments;
      
      - make the multi-line comment style consistent with the kernel style elsewhere
        by adding empty first/last line;
      
      - combine some comments;
      
      - update MontaVista copyright;
      
      - remove Pete Popov's old email address...
      Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      7916c354
    • S
      [MIPS] DBAu1xx0 code style cleanup · abd14cc0
      Sergei Shtylyov 提交于
      Fix several errors and warnings given by checkpatch.pl:
      
      - macros with complex values not enclosed in parentheses;
      
      - leading spaces instead of tabs;
      
      - printk() without KERN_* facility level;
      
      - using simple_strtol() where strict_strtol() could be used;
      
      - line over 80 characters.
      
      In addition to these changes, also do the following:
      
      - initialize variable instead of assigning value later where it makes sense;
      
      - insert spaces between operator and its operands, also remove excess spaces
        there;
      
      - remove unneeded numeric literal type casts;
      
      - remove needless parentheses;
      
      - remove space after the type cast's closing parenthesis;
      
      - insert missing space before closing brace in the array initializers;
      
      - replace spaces after the macro name with tabs in the #define directives;
      
      - remove excess tabs after the macro name in the #define directives;
      
      - fix typos/errors, capitalize acronyms, etc. in the comments;
      
      - make the multi-line comment style consistent with the kernel style elsewhere
        by adding empty first/last line;
      
      - update MontaVista copyright;
      
      - remove Pete Popov's old email address...
      Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      abd14cc0
    • S
      [MIPS] Alchemy PCI code style cleanup · a9633279
      Sergei Shtylyov 提交于
      Fix 15 errors and 4 warnings given by checkpatch.pl:
      
      - space between the asterisk and variable name;
      
      - space after opening and before closing parentheses;
      
      - leading spaces instead of tabs;
      
      - printk() without KERN_* facility level;
      
      - unnecessary braces for single-statement block;
      
      - line over 80 characters.
      
      In addition to these changes, also do the following:
      
      - combine the nested 'if' statements into one when possible;
      
      - remove needless parentheses;
      
      - add missing and remove excess spaces between operator and its operands;
      
      - fix printk() format specifiers mismatching the argument types;
      
      - put the function's result type and name/parameters on the same line;
      
      - insert missing and remove excess new lines;
      
      - properly indent multi-line expressions;
      
      - make the multi-line comment style consistent with the kernel style elsewhere
        by adding empty first line;
      
      - fix typos, capitalize acronyms, etc. in the comments;
      
      - update MontaVista copyright;
      
      - remove Pete Popov's old email address...
      Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      a9633279
    • S
      [MIPS] Alchemy common code style cleanup · c1dcb14e
      Sergei Shtylyov 提交于
      Fix many errors and warnings given by checkpatch.pl:
      
      - use of C99 // comments;
      
      - missing space between the type and asterisk in a variable declaration;
      
      - space between the asterisk and function/variable name;
      
      - leading spaces instead of tabs;
      
      - space after opening and before closing parentheses;
      
      - initialization of a 'static' variable to 0;
      
      - missing spaces around assignement/comparison operator;
      
      - brace not on the same line with condition (or 'else') in the 'if'/'switch'
        statement;
      
      - missing space between 'if'/'for'/'while' and opening parenthesis;
      
      - use of assignement in 'if' statement's condition;
      
      - printk() without KERN_* facility level;
      
      - EXPORT_SYMBOL() not following its function immediately;
      
      - unnecessary braces for single-statement block;
      
      - adding new 'typedef' (where including <linux/types.h> will do);
      
      - use of 'extern' in the .c file (where it can be avoided by including header);
      
      - line over 80 characters.
      
      In addition to these changes, also do the following:
      
      - insert missing space after opening brace and/or before closing brace in the
        structure initializers;
      
      - insert spaces between operator and its operands;
      
      - put the function's result type and name/parameters on the same line;
      
      - properly indent multi-line expressions;
      
      - remove commented out code;
      
      - remove useless initializers and code;
      
      - remove needless parentheses;
      
      - fix broken/excess indentation;
      
      - add missing spaces between operator and its operands;
      
      - insert missing and remove excess new lines;
      
      - group 'else' and 'if' together where possible;
      
      - make au1xxx_platform_init() 'static';
      
      - regroup variable declarations in pm_do_freq() for prettier look;
      
      - replace numeric literals with the matching macros;
      
      - fix printk() format specifiers mismatching the argument types;
      
      - make the multi-line comment style consistent with the kernel style elsewhere
        by adding empty first line and/or adding space on their left side;
      
      - make two-line comments that only have one line of text one-line;
      
      - fix typos/errors, capitalize acronyms, etc. in the comments;
      
      - fix/remove obsolete references in the comments;
      
      - reformat some comments;
      
      - add comment about the CPU:counter clock ratio to calc_clock();
      
      - update MontaVista copyright;
      
      - remove Pete Popov's and Steve Longerbeam's old email addresses...
      Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      c1dcb14e
    • S
      [MIPS] Alchemy common headers style cleanup · ff6814d5
      Sergei Shtylyov 提交于
      Fix several errors and warnings given by checkpatch.pl:
      
      - space after opening and before closing parentheses;
      
      - opening brace following 'struct' not on the same line;
      
      - leading spaces instead of tabs;
      
      - use of C99 // comments;
      
      - macros with complex values not enclosed in parentheses;
      
      - missing space between the type and asterisk in a variable declaration;
      
      - space between asterisk and function name;
      
      - including <asm/io.h> instead of <linux/io.h> and <asm/irq.h> instead of
        <linux/irq.h>;
      
      - use of '__inline__' instead of 'inline';
      
      - space between function name and opening parenthesis;
      
      - line over 80 characters.
      
      In addition to these changes, also do the following:
      
      - remove needless parentheses;
      
      - insert spaces between operator and its operands;
      
      - replace spaces after the macro name with tabs in the #define directives and
        after the type in the structure field declarations;
      
      - remove excess tabs after the macro name in the #define directives and in the
        'extern' variable declarations;
      
      - remove excess spaces between # and define for the SSI_*_MASK macros to align
        with other such macros;
      
      - put '||' operator on the same line with its first operand;
      
      - properly indent multi-line function prototypes;
      
      - make the multi-line comment style consistent with the kernel style elsewhere
        by adding empty first line and/or adding space/asterisk on their left side;
      
      - make two-line comments that only have one line of text one-line;
      
      - convert the large multi-line comment in au1xxx_ide.h into several one-liners,
        replace spaces with tabs there;
      
      - fix typos/errors, capitalize acronyms, etc. in the comments;
      
      - insert missing and remove excess new lines;
      
      - update MontaVista copyright;
      
      - remove Pete Popov's and Steve Longerbeam's old email addresses...
      Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      ff6814d5
    • R
      [MIPS] Add empty argument parenthesis to GCC_IMM_ASM · ad1d77a3
      Ralf Baechle 提交于
      This is to clarify that GCC_IMM_ASM does not take an argument as the
      context of the macro's invocation seems to imply.
      
      As suggested by Maciej W. Rozycki (macro@linux-mips.org).
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      ad1d77a3
    • J
      [MIPS] msp_hwbutton.c: minor irq handler cleanups · 1c9e919f
      Jeff Garzik 提交于
      - remove always-true test
      
      - neaten request_irq() indentation
      
      This change's main purpose is to prepare for the patchset in
      jgarzik/misc-2.6.git#irq-remove, that explores removal of the
      never-used 'irq' argument in each interrupt handler.
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      1c9e919f
    • A
      [MIPS] unexport __kmap_atomic_to_page · a6406304
      Adrian Bunk 提交于
      This patch removes the no longer used export of __kmap_atomic_to_page.
      Signed-off-by: NAdrian Bunk <bunk@kernel.org>
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      a6406304
    • R
      [MIPS] Initialize max_pfn again. · dc3bf353
      Ralf Baechle 提交于
      This was dropped by
      
      commit a0d9e2d891e4cf54676c430da63bd4a17d1cdb80 (lmo)
      commit b6f1f0de (ko)
      Author: Franck Bui-Huu <vagabon.xyz@gmail.com>
      Date:   Fri Aug 11 17:51:48 2006 +0200
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      dc3bf353
    • R
      [MIPS] IRIX: Handle do_brk() error return correctly. · f4324f3e
      Ralf Baechle 提交于
      do_brk's return value was stored in an unsigned long variable before being
      tested for less than zero making the test always fail.  Also do_brk's
      called irix_map_prda_page wasn't forwarding do_brk() success.
      
      Bug checking the return value of do_brk() and initial fix for it found
      by Roel Kluin <12o3l@tiscali.nl>.
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      f4324f3e
    • K
    • R
      [MIPS] Don't use max_pfn which is no longer initialized these days. · 9f2546ad
      Ralf Baechle 提交于
      Still won't play nicely with esotheric configurations such as discontig
      memory ...
      Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      9f2546ad