- 16 7月, 2010 17 次提交
-
-
由 Andy Shevchenko 提交于
There were two methods isdn_gethex() and isdn_getnum() which are custom implementations of strtoul(). Get rid of them in regard to strict_strtoul() kernel's function. Signed-off-by: NAndy Shevchenko <andy.shevchenko@gmail.com> Cc: Hansjoerg Lipp <hjlipp@web.de> Cc: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: gigaset307x-common@lists.sourceforge.net Cc: netdev@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy Shevchenko 提交于
In this case we safe to use strict_strtoul(). Signed-off-by: NAndy Shevchenko <andy.shevchenko@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: netdev@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy Shevchenko 提交于
Signed-off-by: NAndy Shevchenko <andy.shevchenko@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Tilman Schmidt <tilman@imap.cc> Cc: netdev@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Huewe 提交于
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and .subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the PCI_VDEVICE macro, and thus improves readability. Signed-off-by: NPeter Huewe <peterhuewe@gmx.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Huewe 提交于
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and .subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the PCI_VDEVICE macro, and thus improves readability. Signed-off-by: NPeter Huewe <peterhuewe@gmx.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Huewe 提交于
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and .subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the PCI_VDEVICE macro, and thus improves readability. Signed-off-by: NPeter Huewe <peterhuewe@gmx.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Huewe 提交于
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and .subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the PCI_VDEVICE macro, and thus improves readability. Signed-off-by: NPeter Huewe <peterhuewe@gmx.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Huewe 提交于
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and .subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the PCI_VDEVICE macro, and thus improves readability. Signed-off-by: NPeter Huewe <peterhuewe@gmx.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Huewe 提交于
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and .subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the PCI_VDEVICE macro, and thus improves readability. Signed-off-by: NPeter Huewe <peterhuewe@gmx.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Huewe 提交于
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and .subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the PCI_VDEVICE macro, and thus improves readability. Signed-off-by: NPeter Huewe <peterhuewe@gmx.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Huewe 提交于
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and .subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the PCI_VDEVICE macro, and thus improves readability. Signed-off-by: NPeter Huewe <peterhuewe@gmx.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Huewe 提交于
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and .subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the PCI_VDEVICE macro, and thus improves readability. Signed-off-by: NPeter Huewe <peterhuewe@gmx.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Huewe 提交于
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and .subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the PCI_VDEVICE macro, and thus improves readability. Signed-off-by: NPeter Huewe <peterhuewe@gmx.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Huewe 提交于
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and .subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the PCI_VDEVICE macro, and thus improves readability. Signed-off-by: NPeter Huewe <peterhuewe@gmx.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Huewe 提交于
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and .subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the PCI_VDEVICE macro, and thus improves readability. Signed-off-by: NPeter Huewe <peterhuewe@gmx.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wan ZongShun 提交于
This patch fixed a bug that Mac driver does not work,because I missed the clk enable. I have ever tested the driver when I submitted previous Mac driver patch, and it worked good, since my bootloader has enabled the clock in advance. But when I try to use other bootloader where clock engine was disabled,the Mac driver does not work, so I send this patch to fix this issue. Signed-off-by: NWan ZongShun <mcuos.com@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Remove near duplication of format string constants by using the newly introduced vsprintf extention %pV to reduce text by 20k or so. $ size drivers/net/mlx4/built-in.o* text data bss dec hex filename 161367 1866 48784 212017 33c31 drivers/net/mlx4/built-in.o 142621 1866 46248 190735 2e90f drivers/net/mlx4/built-in.o.new Use printk_once as appropriate. Convert printks to pr_<level>, some bare printks now use pr_cont. Remove now unused #define PFX. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 7月, 2010 18 次提交
-
-
由 Chihau Chau 提交于
This patch fix a code style issue, if a function is exported, the EXPORT_SYMBOL macro for it should follow immediately after the closing function brace line. Signed-off-by: NChihau Chau <chihau@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas de Pesloüan 提交于
The test for buffer overflow ensures we have room for 6 more bytes. sprintf, called with %s:%d, slave->dev->name, slave->queue_id may yield far more than 6 bytes. The correct test is res > (PAGE_SIZE - IFNAMSIZ - 6) . Signed-off-by: NNicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kulikov Vasiliy 提交于
Free allocated netdev if no probe is expected. Signed-off-by: NKulikov Vasiliy <segooon@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
The reset_policy() does: memset(d->tcfd_defdata, 0, SIMP_MAX_DATA); strlcpy(d->tcfd_defdata, defdata, SIMP_MAX_DATA); In the original code, the size of d->tcfd_defdata wasn't fixed and if strlen(defdata) was less than 31, reset_policy() would cause memory corruption. Please Note: The original alloc_defdata() assumes defdata is 32 characters and a NUL terminator while reset_policy() assumes defdata is 31 characters and a NUL. This patch updates alloc_defdata() to match reset_policy() (ie a shorter string). I'm not very familiar with this code so please review carefully. Signed-off-by: NDan Carpenter <error27@gmail.com> Acked-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
When the crash kernel is loaded after crash, the device is in unknown state. So reset the device contexts prior to its creation in case of kdump, depending upon kernel parameter reset_devices. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kulikov Vasiliy 提交于
Unmap mapped IO in wd_probe1() if register_netdev() failed. Signed-off-by: NKulikov Vasiliy <segooon@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kulikov Vasiliy 提交于
Use %p instead of %08x in printk(). Signed-off-by: NKulikov Vasiliy <segooon@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anirban Chakraborty 提交于
o NPAR configuration which is programmed in fw, need to restore after fw recovery. o Update version to 5.0.7 Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sucheta Chakraborty 提交于
Pci error recovery support added. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
netdev notifier are not unregistered if pci_register_driver fails. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
Disable tx timeout recovery, if auto_fw_reset is disable Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
Turning off rx pause param and autoneg param is not supported so return error in that case. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christoph Egger 提交于
ETRAX_NETWORK_RED_ON_NO_CONNECTION doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: NChristoph Egger <siccegge@cs.fau.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christoph Egger 提交于
SH_HICOSH4 doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: NChristoph Egger <siccegge@cs.fau.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christoph Egger 提交于
CASSINI_NAPI doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: NChristoph Egger <siccegge@cs.fau.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christoph Egger 提交于
CASSINI_MULTICAST_REG_WRITE doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: NChristoph Egger <siccegge@cs.fau.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christoph Egger 提交于
CASSINI_QGE_DEBUG doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: NChristoph Egger <siccegge@cs.fau.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christoph Egger 提交于
{AR,WAVE}LAN doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: NChristoph Egger <siccegge@cs.fau.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 7月, 2010 5 次提交
-
-
由 David S. Miller 提交于
Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
-
由 David S. Miller 提交于
This reverts commit b31fb868. pcim_*() managed drivers do not need explicit resource releasing like this. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John W. Linville 提交于
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/wl12xx/wl1271_cmd.h
-
由 David J. Choi 提交于
Body of the explanation: -support 16bit and 32bit bus width. -add device reset for ks8842/8841 Micrel device. -set 100Mbps as a default for Micrel device. -set MAC address in both MAC/Switch layer with different sequence for Micrel device, as mentioned in data sheet. -use private data to set options both 16/32bit bus width and Micrel device/ Timberdale(FPGA). -update Kconfig in order to put more information about ks8842 device. Signed-off-by: NDavid J. Choi <david.choi@micrel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-