Skip to content

L
linux

xiphi1978 / linux

通知 2
Star 0
Fork 0
L
linux

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 12 2月, 2007 2 次提交
  3. 11 2月, 2007 1 次提交
    • F
      [PARTITION]: Add whole_disk attribute. · d18d7682
      由 Fabio Massimo Di Nitto 提交于 
      Some partitioning systems create special partitions that
span the entire disk.  One example are Sun partitions, and
this whole-disk partition exists to tell the firmware the
extent of the entire device so it can load the boot block
and do other things.

Such partitions should not be treated as normal partitions,
because all the other partitions overlap this whole-disk one.
So we'd see multiple instances of the same UUID etc. which
we do not want.  udev and friends can thus search for this
'whole_disk' attribute and use it to decide to ignore the
partition.
Signed-off-by: NFabio Massimo Di Nitto <fabbione@ubuntu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d18d7682
  5. 09 12月, 2006 2 次提交
  7. 08 12月, 2006 2 次提交
    • S
      [PATCH] Fix check_partition routines · 57881dd9
      由 Suzuki K P 提交于 
      check_partition() stops its probe once it hits an I/O error from the
partition checkers.  This would prevent the actual partition checker
getting a chance to verify the partition.

So this patch lets check_partition() continue probing untill it hits a
success while recording the I/O error which might have been reported by the
checking routines.

Also, it does some cleanup of the partition methods for ibm, atari and
amiga to return -1 upon hitting an I/O error.
Signed-off-by: NSuzuki K P <suzuki@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      57881dd9
    • S
      [PATCH] fix rescan_partitions to return errors properly · 5127d002
      由 Suzuki Kp 提交于 
      The current rescan_partition implementation ignores the errors that comes from
the lower layer.  It reports success for unknown partitions as well as I/O
error cases while reading the partition information.

The unknown partition is not (and will not be) considered as an error in the
kernel, since there are legal users of it (e.g, members of a RAID5 MD Device
or a new disk which is not partitioned at all ).  Changing this behaviour
would scare the user about a serious problem with their disk and is not
recommended.  Thus for both "unknown partitions" to the Linux (eg., DEC
VMS,Novell Netware) and the legal users of NULL partition, would still be
reported as "SUCCESS".

The patch attached here, scares the user about something which he does need to
worry about.  i.e, returning -EIO on disk I/O errors while reading the
partition information.
Signed-off-by: NSuzuki K P <suzuki@in.ibm.com>
Cc: Erik Mouw <erik@harddisk-recovery.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      5127d002
  9. 05 12月, 2006 1 次提交
  11. 17 10月, 2006 1 次提交
  13. 11 10月, 2006 1 次提交
  15. 01 10月, 2006 2 次提交
    • R
      [PATCH] fs/partitions: Conversion to generic boolean · 130c6b98
      由 Richard Knutsson 提交于 
      Conversion of booleans to: generic-boolean.patch (2006-08-23)
Signed-off-by: NRichard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      130c6b98
    • D
      [PATCH] BLOCK: Make it possible to disable the block layer [try #6] · 9361401e
      由 David Howells 提交于 
      Make it possible to disable the block layer.  Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.

This patch does the following:

 (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
     support.

 (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
     an item that uses the block layer.  This includes:

     (*) Block I/O tracing.

     (*) Disk partition code.

     (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.

     (*) The SCSI layer.  As far as I can tell, even SCSI chardevs use the
     	 block layer to do scheduling.  Some drivers that use SCSI facilities -
     	 such as USB storage - end up disabled indirectly from this.

     (*) Various block-based device drivers, such as IDE and the old CDROM
     	 drivers.

     (*) MTD blockdev handling and FTL.

     (*) JFFS - which uses set_bdev_super(), something it could avoid doing by
     	 taking a leaf out of JFFS2's book.

 (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
     linux/elevator.h contingent on CONFIG_BLOCK being set.  sector_div() is,
     however, still used in places, and so is still available.

 (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
     parts of linux/fs.h.

 (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.

 (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.

 (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
     is not enabled.

 (*) fs/no-block.c is created to hold out-of-line stubs and things that are
     required when CONFIG_BLOCK is not set:

     (*) Default blockdev file operations (to give error ENODEV on opening).

 (*) Makes some /proc changes:

     (*) /proc/devices does not list any blockdevs.

     (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.

 (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.

 (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
     given command other than Q_SYNC or if a special device is specified.

 (*) In init/do_mounts.c, no reference is made to the blockdev routines if
     CONFIG_BLOCK is not defined.  This does not prohibit NFS roots or JFFS2.

 (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
     error ENOSYS by way of cond_syscall if so).

 (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
     CONFIG_BLOCK is not set, since they can't then happen.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
      9361401e
  17. 30 9月, 2006 1 次提交
    • O
      [PATCH] ignore partition table on disks with AIX label · e1dfa92d
      由 Olaf Hering 提交于 
      The on-disk data structures from AIX are not known, also the filesystem
layout is not known.  There is a msdos partition signature at the end of
the first block, and the kernel recognizes 3 small (and overlapping)
partitions.  But they are not usable.  Maybe the firmware uses it to find
the bootloader for AIX, but AIX boots also if the first block is cleared.

This is the content of the partition table:
 # dd if=/dev/sdb count=$(( 4 * 16 )) bs=1 skip=$(( 0x1be )) | xxd
0000000: 0000 0000 0000 0000 0000 0000 0000 0000  ................
0000010: 80ff ffff 41ff ffff 1b11 0000 381b 0000  ....A.......8...
0000020: 00ff ffff 41ff ffff 0211 0000 1900 0000  ....A...........
0000030: 80ff ffff 41ff ffff 1b11 0000 381b 0000  ....A.......8...

Handle the whole disk as empty disk.

This fixes also YaST which compares the output from parted (and formerly
fdisk) with /proc/partitions.  fdisk recognizes the AIX label since a long
time, SuSE has a patch for parted to handle the disk label as unknown.

dmesg will look like this:
 sda: [AIX]  unknown partition table

Tested on an IBM B50 with AIX V4.3.3.
Signed-off-by: NOlaf Hering <olh@suse.de>
Cc: Albert Cahalan <acahalan@gmail.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      e1dfa92d
  19. 27 9月, 2006 1 次提交
  21. 27 8月, 2006 1 次提交
  23. 01 8月, 2006 1 次提交
  25. 11 7月, 2006 1 次提交
  27. 01 7月, 2006 1 次提交
  29. 27 6月, 2006 4 次提交
  31. 23 6月, 2006 2 次提交
    • M
      [PATCH] make kernel warn about incorrectly sized partitions · 98bd34ea
      由 Mike Miller 提交于 
      Sometimes partitions claim to be larger than the reported capacity of a
disk device.  This patch makes the kernel warn about those partitions.

We still permit these patitions to be used.  Quoting Andries Brouwer
<Andries.Brouwer@cwi.nl>:

 Case 1: The kernel is mistaken about the size of the disk.  (There are
 commands to clip a disk to a certain capacity, there are jumpers to tell a
 disk that it should report a certain capacity etc.  Usually this is because
 of BIOS bugs.  In bad cases the machine will crash in the BIOS and hence fail
 to boot if the disk reports full capacity.) In such cases actually accessing
 the blocks of the partition may work fine, or may work fine after running an
 unclip utility.  I wrote "setmax" some years ago precisely for this reason.

 Case 2: There was a messy partition table (maybe just a rounding error) but
 the actual filesystem on the partition is contained in the physical disk.
 Now using the filesystem goes without problem.

 Case 3: Both partition and filesystem extend beyond the end of the disk.  In
 forensic or debugging situations one often uses a copy of the start of a
 disk.  Now access beyond the end gives an expected I/O error.
Signed-off-by: NMike Miller <mike.miller@hp.com>
Signed-off-by: NStephen Cameron <steve.cameron@hp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      98bd34ea
    • P
      [PATCH] read_mapping_page for address space · 090d2b18
      由 Pekka Enberg 提交于 
      Add read_mapping_page() which is used for callers that pass
mapping->a_ops->readpage as the filler for read_cache_page.  This removes
some duplication from filesystem code.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      090d2b18
  33. 22 6月, 2006 1 次提交
  35. 13 5月, 2006 1 次提交
    • L
      Alternative fix for MMC oops on unmount after removal · 032ebf26
      由 Linus Torvalds 提交于 
      Make sure to clear the driverfs_dev pointer when we do del_gendisk() (on
disk removal), so that other users that may still have a ref to the disk
won't try to use the stale pointer.

Also move the KOBJ_REMOVE uevent handler up, so that the uevent still
has access to the driverfs_dev data.

This all should hopefully fix the problems with MMC umounts after device
removals that caused commit 56cf6504 and
its reversal (1a2acc9e).

Original problem reported by Todd Blumer and others.
Acked-by: NGreg KH <gregkh@suse.de>
Cc: Russell King <rmk+lkml@arm.linux.org.uk>
Cc: James Bottomley <James.Bottomley@SteelEye.com>
Cc: Erik Mouw <erik@harddisk-recovery.com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: Todd Blumer <todd@sdgsystems.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      032ebf26
  37. 18 4月, 2006 1 次提交
  39. 15 4月, 2006 1 次提交
    • K
      [PATCH] BLOCK: delay all uevents until partition table is scanned · d4d7e5df
      由 Kay Sievers 提交于 
      [BLOCK] delay all uevents until partition table is scanned

Here we delay the annoucement of all block device events until the
disk's partition table is scanned and all partition devices are already
created and sysfs is populated.

We have a bunch of old bugs for removable storage handling where we
probe successfully for a filesystem on the raw disk, but at the
same time the kernel recognizes a partition table and creates partition
devices.
Currently there is no sane way to tell if partitions will show up or not
at the time the disk device is announced to userspace. With the delayed
events we can simply skip any probe for a filesystem on the raw disk when
we find already present partitions.
Signed-off-by: NKay Sievers <kay.sievers@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
      d4d7e5df
  41. 28 3月, 2006 3 次提交
  43. 27 3月, 2006 1 次提交
    • I
      [PATCH] sem2mutex: fs/ · 353ab6e9
      由 Ingo Molnar 提交于 
      Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: Eric Van Hensbergen <ericvh@ericvh.myip.org>
Cc: Robert Love <rml@tech9.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      353ab6e9
  45. 24 3月, 2006 1 次提交
  47. 09 3月, 2006 1 次提交
  49. 17 1月, 2006 1 次提交
  51. 09 1月, 2006 1 次提交
    • R
      [ARM] Make Acorn partition types depend on ACORN_PARTITION · 50365c57
      由 Russell King 提交于 
      balamurugan reported a problem where it was possible to have
the various Acorn partition types selected in the configuration,
but ACORN_PARTITION disabled.  Since ACORN_PARTITION controls
whether we build fs/partitions/acorn.c, this lead to undefined
references to the adfspart_check_TYPE symbols.

Fix this by making the Acorn partition type symbols depend on
ACORN_PARTITION.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
      50365c57
  53. 07 1月, 2006 2 次提交
  55. 05 1月, 2006 2 次提交