- 21 8月, 2009 2 次提交
-
-
由 Goldwyn Rodrigues 提交于
In case a downconvert is queued, and a flock receives a signal, BUG_ON(lockres->l_action != OCFS2_AST_INVALID) is triggered because a lock cancel triggers a dlmunlock while an AST is scheduled. To avoid this, allow a LKM_CANCEL to pass through, and let it wait on __dlm_wait_on_lockres(). Signed-off-by: NGoldwyn Rodrigues <rgoldwyn@suse.de> Acked-off-by: NMark Fasheh <mfasheh@suse.com> Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
由 Jan Kara 提交于
There is missing name for NFSSync cluster lock. This makes lockdep unhappy because we end up passing NULL to lockdep when initializing lock key. Fix it. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
- 18 8月, 2009 3 次提交
-
-
由 Jan Kara 提交于
If we fail to mount the filesystem, we have to be careful not to dereference uninitialized structures in ocfs2_kill_sb. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
由 Tao Ma 提交于
In ocfs2_do_truncate, we forget to release last_eb_bh which will cause memleak. So call brelse in the end. Signed-off-by: NTao Ma <tao.ma@oracle.com> Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
由 Jan Kara 提交于
ocfs2_read_virt_blocks() does BUG when we try to read a block from a file beyond its end. Since this can happen due to filesystem corruption, it is not really an appropriate answer. Make ocfs2_read_quota_block() check the condition and handle it by calling ocfs2_error() and returning EIO. [ Modified to print ip_blkno in the error - Joel ] Reported-by: NTristan Ye <tristan.ye@oracle.com> Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
- 11 8月, 2009 1 次提交
-
-
由 Jan Kara 提交于
In OCFS2, allocator locks rank above transaction start. Thus we cannot extend quota file from inside a transaction less we could deadlock. We solve the problem by starting transaction not already in ocfs2_acquire_dquot() but only in ocfs2_local_read_dquot() and ocfs2_global_read_dquot() and we allocate blocks to quota files before starting the transaction. In case we crash, quota files will just have a few blocks more but that's no problem since we just use them next time we extend the quota file. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
- 08 8月, 2009 2 次提交
-
-
由 Roel Kluin 提交于
Do not exceed array status_map[] Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
由 Sunil Mushran 提交于
In a non-sparse extend, we correctly allocate (and zero) the clusters between the old_i_size and pos, but we don't zero the portions of the cluster we're writing to outside of pos<->len. It handles clustersize > pagesize and blocksize < pagesize. [Cleaned up by Joel Becker.] Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com> Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
- 01 8月, 2009 1 次提交
-
-
由 Goldwyn Rodrigues 提交于
We BUG_ON() the same thing twice. Signed-off-by: NGoldwyn Rodrigues <rgoldwyn@suse.de> Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
- 31 7月, 2009 1 次提交
-
-
由 Tao Ma 提交于
ocfs2_quota_write needs to release the lock if it fails to read quota block. So use "goto out" instead of "return err". Signed-off-by: NTao Ma <tao.ma@oracle.com> Acked-by: NJan Kara <jack@suse.cz> Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
- 24 7月, 2009 8 次提交
-
-
由 Jan Kara 提交于
Numbers of needed credits for some quota operations were written as raw numbers. Create appropriate defines instead. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
由 Jan Kara 提交于
syncjiff is just a converted value of syncms. Some places which are updating syncms forgot to update syncjiff as well. Since the conversion is just a simple division / multiplication and it does not happen frequently, just remove the syncjiff field to avoid forgotten conversions. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
由 Jan Kara 提交于
We just set blockcheck stats to zeros but we should also properly initialize the spinlock there. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
由 Jan Kara 提交于
Padding fields of on-disk dquot structure were not zeroed. Zero them so that it's easier to use them later. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
由 Jan Kara 提交于
When we extend local quota file, we should initialize data in newly allocated block. Firstly because on recovery we could parse bogus data, secondly so that block checksums are properly computed. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
由 Jan Kara 提交于
In a code path extending local quota files we marked new header buffer uptodate only after calling ocfs2_journal_access_dq() which triggers a bug. Fix it and also call ocfs2 variant of the function marking buffer uptodate. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
由 Jan Kara 提交于
Change i_size of global quota files so that it always remains aligned to block size. This is mainly because the end of quota block may contain checksum (if checksumming is enabled) and it's a bit awkward for it to be "outside" of quota file (and it makes life harder for ocfs2-tools). Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
由 Tao Ma 提交于
In ocfs2_adjust_adjacent_records, we will adjust adjacent records according to the extent_list in the lower level. But actually the lower level tree will either be a leaf or a branch. If we only use ocfs2_is_empty_extent we will meet with some problem if the lower tree is a branch (tree_depth > 1). So use !ocfs2_rec_clusters instead. And actually only the leaf record can have holes. So add a BUG_ON for non-leaf branch. Signed-off-by: NTao Ma <tao.ma@oracle.com> Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
- 22 7月, 2009 2 次提交
-
-
由 Jan Kara 提交于
In commit ea455f8a, we moved the dentry lock put process into ocfs2_wq. This causes problems during umount because ocfs2_wq can drop references to inodes while they are being invalidated by invalidate_inodes() causing all sorts of nasty things (invalidate_inodes() ending in an infinite loop, "Busy inodes after umount" messages etc.). We fix the problem by stopping ocfs2_wq from doing any further releasing of inode references on the superblock being unmounted, wait until it finishes the current round of releasing and finally cleaning up all the references in dentry_lock_list from ocfs2_put_super(). The issue was tracked down by Tao Ma <tao.ma@oracle.com>. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
由 Tao Ma 提交于
In normal tree rotation left process, we will never touch the tree branch above subtree_index and ocfs2_extend_rotate_transaction doesn't reserve the credits for them either. But when we want to delete the rightmost extent block, we have to update the rightmost records for all the rightmost branch(See ocfs2_update_edge_lengths), so we have to allocate extra credits for them. What's more, we have to access them also. Signed-off-by: NTao Ma <tao.ma@oracle.com> Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
- 21 7月, 2009 4 次提交
-
-
由 Wengang Wang 提交于
ocfs2_get_block() does no allocation. Hole filling for writes should have happened farther up in the call chain. We detect this case and print an error, but we then continue with the function. We should be exiting immediately. Signed-off-by: NWengang Wang <wen.gang.wang@oracle.com> Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
由 Wengang Wang 提交于
A typo caused ocfs2_write_cluster() to return 0 in some error cases. Fix it. Signed-off-by: NWengang Wang <wen.gang.wang@oracle.com> Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
由 Subrata Modak 提交于
gcc 4.4.1 generates the following build warning on i386: CC [M] fs/ocfs2/xattr.o fs/ocfs2/xattr.c: In function ‘ocfs2_xattr_block_get’: fs/ocfs2/xattr.c:1055: warning: ‘block_off’ may be used uninitialized in this function The following fix is based on a similar approach by David Howells few days back: http://lkml.org/lkml/2009/7/9/109, Signed-off-by: Subrata Modak<subrata@linux.vnet.ibm.com>, Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
由 Goldwyn Rodrigues 提交于
generic_write_checks() expects count to be initialized to the size of the write. Writes to files open with O_DIRECT|O_LARGEFILE write 0 bytes because count is uninitialized. Signed-off-by: NGoldwyn Rodrigues <rgoldwyn@suse.de> Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
- 11 7月, 2009 1 次提交
-
-
由 Wengang Wang 提交于
in ocfs2_file_aio_write(), log_exit() could don't log the value which is really returned. this patch fixes it. Signed-off-by: NWengang Wang <wen.gang.wang@oracle.com> Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
- 09 7月, 2009 15 次提交
-
-
由 Jeff Liu 提交于
in dlmrecovery.c:1121, replace 'migrate' to 'migration' to keep the consistency by comparing to other lines with the similar log info in the same file. Signed-off-by: NJeff Liu <jeff.liu@oracle.com> Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
由 Jeff Mahoney 提交于
If the mount fails for any reason, ocfs2_dismount_volume calls ocfs2_orphan_scan_stop. It requires that ocfs2_orphan_scan_init be called to setup the mutex and work queues, but that doesn't happen if the mount has failed and we oops accessing an uninitialized work queue. This patch splits the init and startup of the orphan scan, eliminating the oops. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
由 Yinghai Lu 提交于
Alex found that specjbb2005 still can not run with hugepages on an x86-64 machine. This only happens when numa is not compiled in. The root cause: node_set_state will not set it back for us in that case, so don't clear that when numa is not select in config [ v2: use node_clear_state instead ] Reported-and-Tested-by: NAlex Shi <alex.shi@intel.com> Signed-off-by: NYinghai Lu <yinghai@kernel.org> Reviewed-by: NChristoph Lameter <cl@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Commit 5fd29d6c ("printk: clean up handling of log-levels and newlines") changed printk semantics. printk lines with multiple KERN_<level> prefixes are no longer emitted as before the patch. <level> is now included in the output on each additional use. Remove all uses of multiple KERN_<level>s in formats. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Move tty entries to tty not trivial. Noted by David Brownell. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
This fixes the ppp problems and various other issues with call locking caused by one side of a pty called in one locking context trying to match another with differing rules on the other side. We also get a big slack space to work with that means we can bury the flow control deadlock case for any conceivable real world situation. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Powernow-k8: support family 0xf with 2 low p-states [CPUFREQ] fix (utter) cpufreq_add_dev mess [CPUFREQ] Cleanup locking in conservative governor [CPUFREQ] Cleanup locking in ondemand governor [CPUFREQ] Mark policy_rwsem as going static in cpufreq.c wont be exported [CPUFREQ] Eliminate the recent lockdep warnings in cpufreq
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-quota-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-quota-2.6: quota: Fix possible deadlock during parallel quotaon and quotaoff
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM: Clear -EAGAIN in dpm_prepare x86: Fix resume from suspend when CONFIG_CC_STACKPROTECTOR
-
由 Sheng Yang 提交于
After some API change, intel_iommu_unmap_range() introduced a assumption that parameter size != 0, otherwise the dma_pte_clean_range() would have a overflowed argument. But the user like KVM don't have this assumption before, then some BUG() triggered. Fix it by ignoring size = 0. Signed-off-by: NSheng Yang <sheng@linux.intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Catalin Marinas 提交于
The f_dev in _request_firmware() is allocated via the fw_setup_device() and fw_register_device() calls and its class set to firmware_class (the class release function is fw_dev_release). Commit 6acf70f0 replaced the kfree(dev) in fw_dev_release() with a put_device() call but my understanding is that the release function is called via put_device -> kobject_put -> kref_put -> koject_release etc. and it should call kfree since it's the last to see this device structure alive. Because of that, the _request_firmware() function on its -ENOENT error path only calls device_unregister(f_dev) which would eventually call fw_dev_release() but there is no kfree (the subsequent put_device call would just make the kref negative). Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Acked-by: NMing Lei <tom.leiming@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Catalin Marinas 提交于
Commit 1c8542c7 replaced kmalloc() with memdup_user() in the write() function but also dropped the kfree(temp). The memdup_user() function allocates memory which is never freed. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Cc: Parag Warudkar <parag.warudkar@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: gpio_mouse - use standard driver registration method Input: mark serio and i8042 as suspended when hibernating too Input: add support for generic GPIO-based matrix keypad Input: arrange keyboards alphabetically Input: gpio-keys - avoid possibility of sleeping in timer function Input: gpio-keys - revert 'change timer to workqueue' Input: dm355evm_keys - fix kconfig symbol names Input: wacom - add DTF720a support and fix rotation on Intuos3 Input: i8042 - more reset quirks for MSI Wind-clone netbooks
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Don't use alloc_bootmem() in init_IRQ() path powerpc: Fix spin_event_timeout() to be robust over context switches powerpc: Use pr_devel() in do_dcache_icache_coherency() powerpc/cell: Use pr_devel() in axon_msi.c powerpc: Use pr_devel() in arch/powerpc/mm/gup.c powerpc: Cleanup & use pr_devel() in arch/powerpc/mm/slb.c powerpc/perf_counter: Remove duplicated #include powerpc: Use pr_devel() in arch/powerpc/mm/mmu_context_nohash.c powerpc/pseries: Use pr_devel() in xics.c powerpc: Remove unnecessary semicolons powerpc/pseries: Use pr_devel() in pseries LPAR HPTE routines powerpc/44x: Fix build error with -Werror for Warp platform powerpc/4xx: Have Warp take advantage of GPIO LEDs default-state = keep powerpc/44x: Update Warp defconfig
-
由 Alexey Dobriyan 提交于
Fix various silly problems wrt mnt_namespace.h: - exit_mnt_ns() isn't used, remove it - done that, sched.h and nsproxy.h inclusions aren't needed - mount.h inclusion was need for vfsmount_lock, but no longer - remove mnt_namespace.h inclusion from files which don't use anything from mnt_namespace.h Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-