- 12 7月, 2013 1 次提交
-
-
由 Chandra Seetharaman 提交于
During the review of seperate pquota inode patches, David noticed that the test to detect all quotas being turned off was incorrect, and hence the block was not freeing all the quota information. The check made sense in Irix, but in Linux, quota is turned off one at a time, which makes the test invalid for Linux. This problem existed since XFS was ported to Linux. David suggested to fix the problem by detecting when all quotas are turned off by checking m_qflags. Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: NBen Myers <bpm@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
- 11 7月, 2013 1 次提交
-
-
由 Chandra Seetharaman 提交于
Add project quota changes to all the places where group quota field is used: * add separate project quota members into various structures * split project quota and group quotas so that instead of overriding the group quota members incore, the new project quota members are used instead * get rid of usage of the OQUOTA flag incore, in favor of separate group and project quota flags. * add a project dquot argument to various functions. Not using the pquotino field from superblock yet. Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: NBen Myers <bpm@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
- 10 7月, 2013 7 次提交
-
-
由 Carlos Maiolino 提交于
XFS removes sgid bits of subdirectories under a directory containing a default acl. When a default acl is set, it implies xfs to call xfs_setattr_nonsize() in its code path. Such function is shared among mkdir and chmod system calls, and does some checks unneeded by mkdir (calling inode_change_ok()). Such checks remove sgid bit from the inode after it has been granted. With this patch, we extend the meaning of XFS_ATTR_NOACL flag to avoid these checks when acls are being inherited (thanks hch). Also, xfs_setattr_mode, doesn't need to re-check for group id and capabilities permissions, this only implies in another try to remove sgid bit from the directories. Such check is already done either on inode_change_ok() or xfs_setattr_nonsize(). Changelog: V2: Extends the meaning of XFS_ATTR_NOACL instead of wrap the tests into another function V3: Remove S_ISDIR check in xfs_setattr_nonsize() from the patch Signed-off-by: NCarlos Maiolino <cmaiolino@redhat.com> Reviewed-by: NBen Myers <bpm@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Dave Chinner 提交于
During review of the separate project quota inode patches, it became obvious that the dquot log reservation calculation underestimated the number dquots that can be modified in a transaction. This has it's roots way back in the Irix quota implementation. That is, when quotas were first implemented in XFS, it only supported user and project quotas as Irix did not have group quotas. Hence the worst case operation involving dquot modification was calculated to involve 2 user dquots and 1 project dquot or 1 user dequot and 2 project dquots. i.e. 3 dquots. This was determined back in 1996, and has remained unchanged ever since. However, back in 2001, the Linux XFS port dropped all support for project quota and implmented group quotas over the top. This was effectively done with a search-and-replace of project with group, and as such the log reservation was not changed. However, with the advent of group quotas, chmod and rename now could modify more than 3 dquots in a single transaction - both could modify 4 dquots. Hence this log reservation has been wrong for a long time. In 2005, project quota support was reintroduced into Linux, but it was implemented to be mutually exclusive to group quotas and so this didn't add any new changes to the dquot log reservation. Hence when project quotas were in use (rather than group quotas) the log reservation was again valid, just like in the Irix days. Now, with the addition of the separate project quota inode, group and project quotas are no longer mutually exclusive, and hence operations can now modify three dquots per inode where previously it was only two. The worst case here is the rename transaction, which can allocate/free space on two different directory inodes, and if they have different uid/gid/prid configurations and are world writeable, then rename can actually modify 6 different dquots now. Further, the dquot log reservation doesn't take into account the space used by the dquot log format structure that precedes the dquot that is logged, and hence further underestimates the worst case log space required by dquots during a transaction. This has been missing since the first commit in 1996. Hence the worst case log reservation needs to be increased from 3 to 6, and it needs to take into account a log format header for each of those dquots. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Dave Chinner 提交于
The conversion from local format to extent format requires interpretation of the data in the fork being converted, so it cannot be done in a generic way. It is up to the caller to convert the fork format to extent format before calling into xfs_bmapi_write() so format conversion can be done correctly. The code in xfs_bmapi_write() to convert the format is used implicitly by the attribute and directory code, but they specifically zero the fork size so that the conversion does not do any allocation or manipulation. Move this conversion into the shortform to leaf functions for the dir/attr code so the conversions are explicitly controlled by all callers. Now we can remove the conversion code in xfs_bmapi_write. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Dave Chinner 提交于
Because it's horribly out of date. And mark various deprecated options as deprecated and give them a removal date. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Yann Droneaud 提交于
Macro get_unused_fd() is used to allocate a file descriptor with default flags. Those default flags (0) can be "unsafe": O_CLOEXEC must be used by default to not leak file descriptor across exec(). Instead of macro get_unused_fd(), functions anon_inode_getfd() or get_unused_fd_flags() should be used with flags given by userspace. If not possible, flags should be set to O_CLOEXEC to provide userspace with a default safe behavor. In a further patch, get_unused_fd() will be removed so that new code start using anon_inode_getfd() or get_unused_fd_flags() with correct flags. This patch replaces calls to get_unused_fd() with equivalent call to get_unused_fd_flags(0) to preserve current behavor for existing code. The hard coded flag value (0) should be reviewed on a per-subsystem basis, and, if possible, set to O_CLOEXEC. Signed-off-by: NYann Droneaud <ydroneaud@opteya.com> Reviewed-by: NBen Myers <bpm@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Jie Liu 提交于
There are some unused codes at xfs_bulkstat(): - Variable bp is defined to point to the on-disk inode cluster buffer, but it proved to be of no practical help. - We process the chunks of good inodes which were fetched by iterating btree records from an AG. When processing inodes from each chunk, the code recomputing agbno if run into the first inode of a cluster, however, the agbno is not being used thereafter. This patch tries to clean up those things. Signed-off-by: NJie Liu <jeff.liu@oracle.com> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Eric Sandeen 提交于
XFS_BROOT_SIZE_ADJ is an undocumented macro which accounts for the difference in size between the on-disk and in-core btree root. It's much clearer to just use the newly-added XFS_BMAP_BMDR_SPACE macro which gives us the on-disk size directly. In one case, we must test that the if_broot exists before applying the macro, however. Signed-off-by: NEric Sandeen <sandeen@redhat.com> Reviewed-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NBen Myers <bpm@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
- 29 6月, 2013 7 次提交
-
-
由 Chandra Seetharaman 提交于
Remove all incore use of XFS_OQUOTA_ENFD and XFS_OQUOTA_CHKD. Instead, start using XFS_GQUOTA_.* XFS_PQUOTA_.* counterparts for GQUOTA and PQUOTA respectively. On-disk copy still uses XFS_OQUOTA_ENFD and XFS_OQUOTA_CHKD. Read and write of the superblock does the conversion from *OQUOTA* to *[PG]QUOTA*. Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: NBen Myers <bpm@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Chandra Seetharaman 提交于
In preparation for combined pquota/gquota support, for the sake of readability, change xfs_dquot_acct to be a 2-dimensional array. Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: NBen Myers <bpm@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Chandra Seetharaman 提交于
In preparation for combined pquota/gquota support, for the sake of readability, do some code cleanup surrounding the affected code. Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: NBen Myers <bpm@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Chandra Seetharaman 提交于
In preparation for combined pquota/gquota support, for the sake of readability, change the macro to an inline function. Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: NBen Myers <bpm@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Chandra Seetharaman 提交于
In preparation for combined pquota/gquota support, for the sake of readability, change the macro to an inline function. Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: NBen Myers <bpm@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Chandra Seetharaman 提交于
In preparation for combined pquota/gquota support, define a new function to check if the given inode is a quota inode. Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: NBen Myers <bpm@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Dave Chinner 提交于
For CRC enabled filesystems, add support for the monotonic inode version change counter that is needed by protocols like NFSv4 for determining if the inode has changed in any way at all between two unrelated operations on the inode. This bumps the change count the first time an inode is dirtied in a transaction. Since all modifications to the inode are logged, this will catch all changes that are made to the inode, including timestamp updates that occur during data writes. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Reviewed-by: NChandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
- 28 6月, 2013 11 次提交
-
-
由 Dave Chinner 提交于
Replace the use of buffer based logging of inode initialisation, uses the new logical form to describe the range to be initialised in recovery. We continue to "log" the inode buffers to push them into the AIL and ensure that the inode create transaction is not removed from the log before the inode buffers are written to disk. Update the transaction identifier and reservations to match the changed implementation. Signed-off-by: NDave Chinner <david@fromorbit.com> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Dave Chinner 提交于
When we find a icreate transaction, we need to get and initialise the buffers in the range that has been passed. Extract and verify the information in the item record, then loop over the range initialising and issuing the buffer writes delayed. Support an arbitrary size range to initialise so that in future when we allocate inodes in much larger chunks all kernels that understand this transaction can still recover them. Signed-off-by: NDave Chinner <david@fromorbit.com> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Dave Chinner 提交于
Define the log and space transaction sizes. Factor the current create log reservation macro into the two logical halves and reuse one half for the new icreate transactions. The icreate transaction is transparent to all the high level create code - the pre-calculated reservations will correctly set the reservations dependent on whether the filesystem supports the icreate transaction. Signed-off-by: NDave Chinner <david@fromorbit.com> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Dave Chinner 提交于
Introduce the inode create log item type for logical inode create logging. Instead of logging the changes in buffers, pass the range to be initialised through the log by a new transaction type. This reduces the amount of log space required to record initialisation during allocation from about 128 bytes per inode to a small fixed amount per inode extent to be initialised. This requires a new log item type to track it through the log and the AIL. This is a relatively simple item - most callbacks are noops as this item has the same life cycle as the transaction. Signed-off-by: NDave Chinner <david@fromorbit.com> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Dave Chinner 提交于
If we have a buffer that we have modified but we do not wish to physically log in a transaction (e.g. we've logged a logical change), we still need to ensure that transactional integrity is maintained. Hence we must not move the tail of the log past the transaction that the buffer is associated with before the buffer is written to disk. This means these special buffers still need to be included in the transaction and added to the AIL just like a normal buffer, but we do not want the modifications to the buffer written into the transaction. IOWs, what we want is an "ordered buffer" that maintains the same transactional life cycle as a physically logged buffer, just without the transcribing of the modifications to the log. Hence we need to flag the buffer as an "ordered buffer" to avoid including it in vector size calculations or formatting during the transaction. Once the transaction is committed, the buffer appears for all intents to be the same as a physically logged buffer as it transitions through the log and AIL. Relogging will also work just fine for such an ordered buffer - the logical transaction will be replayed before the subsequent modifications that relog the buffer, so everything will be reconstructed correctly by recovery. Signed-off-by: NDave Chinner <david@fromorbit.com> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Dave Chinner 提交于
And "ordered log vector" is a log vector that is used for tracking a log item through the CIL and into the AIL as part of the log checkpointing. These ordered log vectors are special in that they are not written to to journal in any way, and are not accounted to the checkpoint being written. The reason for this behaviour is to allow operations to attach items to transactions and have them follow the normal transactional lifecycle without actually having to write them to the journal. This allows logging of items that track high level logical changes and writing them to the log, while the physical items being modified pass through into the AIL and pin the tail of the log (and therefore the logical item in the log) until all the modified items are physically written to disk. IOWs, it allows us to write metadata without physically logging every individual change but still maintain the full transactional integrity guarantees we currently have w.r.t. crash recovery. This change modifies some of the CIL item insertion loops, as ordered log vectors introduce some new constraints as they don't track any data. One advantage of this change is that it combines two log vector chain walks into a single pass, so there is less overhead in the transaction commit pass as well. It also kills some unused code in the log vector walk loop when committing the CIL. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Dave Chinner 提交于
Long ago, bulkstat used to read inodes directly from the backing buffer for speed. This had the unfortunate problem of being cache incoherent with unlinks, and so xfs_ifree() had to mark the inode as free directly in the backing buffer. bulkstat was changed some time ago to use inode cache coherent lookups, and so will never see unlinked inodes in it's lookups. Hence xfs_ifree() does not need to touch the inode backing buffer anymore. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Dave Chinner 提交于
When we are allocating a new inode, we read the inode cluster off disk to increment the generation number. We are already using a random generation number for newly allocated inodes, so if we are not using the ikeep mode, we can just generate a new generation number when we initialise the newly allocated inode. This avoids the need for reading the inode buffer during inode creation. This will speed up allocation of inodes in cold, partially allocated clusters as they will no longer need to be read from disk during allocation. It will also reduce the CPU overhead of inode allocation by not having the process the buffer read, even on cache hits. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Dave Chinner 提交于
Dedicated small file workloads have been seeing significant free space fragmentation causing premature inode allocation failure when large inode sizes are in use. A particular test case showed that a workload that runs to a real ENOSPC on 256 byte inodes would fail inode allocation with ENOSPC about about 80% full with 512 byte inodes, and at about 50% full with 1024 byte inodes. The same workload, when run with -o allocsize=4096 on 1024 byte inodes would run to being 100% full before giving ENOSPC. That is, no freespace fragmentation at all. The issue was caused by the specific IO pattern the application had - the framework it was using did not support direct IO, and so it was emulating it by using fadvise(DONT_NEED). The result was that the data was getting written back before the speculative prealloc had been trimmed from memory by the close(), and so small single block files were being allocated with 2 blocks, and then having one truncated away. The result was lots of small 4k free space extents, and hence each new 8k allocation would take another 8k from contiguous free space and turn it into 4k of allocated space and 4k of free space. Hence inode allocation, which requires contiguous, aligned allocation of 16k (256 byte inodes), 32k (512 byte inodes) or 64k (1024 byte inodes) can fail to find sufficiently large freespace and hence fail while there is still lots of free space available. There's a simple fix for this, and one that has precendence in the allocator code already - don't do speculative allocation unless the size of the file is larger than a certain size. In this case, that size is the minimum default preallocation size: mp->m_writeio_blocks. And to keep with the concept of being nice to people when the files are still relatively small, cap the prealloc to mp->m_writeio_blocks until the file goes over a stripe unit is size, at which point we'll fall back to the current behaviour based on the last extent size. This will effectively turn off speculative prealloc for very small files, keep preallocation low for small files, and behave as it currently does for any file larger than a stripe unit. This completely avoids the freespace fragmentation problem this particular IO pattern was causing. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Dave Chinner 提交于
Similar to bulkstat inode chunk readahead, we need to plug directory data buffer readahead during getdents to ensure that we can merge adjacent readahead requests and sort out of order requests optimally before they are dispatched. This improves the readahead efficiency and reduces the IO load it generates as the IO patterns are significantly better for both contiguous and fragmented directories. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Dave Chinner 提交于
I was running some tests on bulkstat on CRC enabled filesystems when I noticed that all the IO being issued was 8k in size, regardless of the fact taht we are issuing sequential 8k buffers for inodes clusters. The IO size should be 16k for 256 byte inodes, and 32k for 512 byte inodes, but this wasn't happening. blktrace showed that there was an explict plug and unplug happening around each readahead IO from _xfs_buf_ioapply, and the unplug was causing the IO to be issued immediately. Hence no opportunity was being given to the elevator to merge adjacent readahead requests and dispatch them as a single IO. Add plugging around the inode chunk readahead dispatch loop in bulkstat to ensure that we don't unplug the queue between adjacent inode buffer readahead IOs and so we get fewer, larger IO requests hitting the storage subsystem for bulkstat. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
- 27 6月, 2013 2 次提交
-
-
由 Jie Liu 提交于
Remove dead function prototype xfs_sync_inode_grab() from xfs_icache.h. Signed-off-by: NJie Liu <jeff.liu@oracle.com> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Jie Liu 提交于
This patch clean out the left function variable as it is useless to xfs_ialloc_get_rec(). Signed-off-by: NJie Liu <jeff.liu@oracle.com> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
- 21 6月, 2013 1 次提交
-
-
由 Eric Sandeen 提交于
xfs_swap_extents_check_format() contains checks to make sure that original and the temporary files during defrag are compatible; Gabriel VLASIU ran into a case where xfs_fsr returned EINVAL because the tests found the btree root to be of size 120, while the fork offset was only 104; IOW, they overlapped. However, this is just due to an error in the xfs_swap_extents_check_format() tests, because it is checking the in-memory btree root size against the on-disk fork offset. We should be checking the on-disk sizes in both cases. This patch adds a new macro to calculate this size, and uses it in the tests. With this change, the filesystem image provided by Gabriel allows for proper file degragmentation. Reported-by: NGabriel VLASIU <gabriel@vlasiu.net> Signed-off-by: NEric Sandeen <sandeen@redhat.com> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
- 20 6月, 2013 4 次提交
-
-
由 Jie Liu 提交于
XFS_MOUNT_RETERR is going to be set at xfs_parseargs() if mp->m_dalign is enabled, so any time we enter "if (mp->m_dalign)" branch in xfs_update_alignment(), XFS_MOUNT_RETERR is set and so we always be emitting a warning and returning an error. Hence, we can remove it and get rid of a couple of redundant check up against it at xfs_upate_alignment(). Thanks Dave Chinner for the suggestions of simplify the code in xfs_parseargs(). Signed-off-by: NJie Liu <jeff.liu@oracle.com> Cc: Dave Chinner <dchinner@redhat.com> Cc: Mark Tinguely <tinguely@sgi.com> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Jie Liu 提交于
Upstream commit 5b292ae3 xfs: make use of xfs_calc_buf_res() in xfs_trans.c Beginning from above commit, neither XFS_ALLOCFREE_LOG_RES() nor XFS_DIROP_LOG_RES() is used by those routines for calculating transaction space reservations, so it's safe to remove them now. Also, with a slightly update for the relevant comments to reflect the ideas of why those log count numbers should be. Signed-off-by: NJie Liu <jeff.liu@oracle.com> Reviewed-by: NBen Myers <bpm@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Jie Liu 提交于
For FIEMAP ioctl(2), if an extent is in delayed allocation state, we need to return the FIEMAP_EXTENT_UNKNOWN flag except the FIEMAP_EXTENT_DELALLOC because its data location is unknown. Signed-off-by: NJie Liu <jeff.liu@oracle.com> Reviewed-by: NBen Myers <bpm@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Mark Tinguely 提交于
Adding an extended attribute to a symbolic link can force that link to an remote extent. xfs_inactive() incorrectly assumes that any symbolic link small enough to be in the inode core is incore, resulting in the remote extent to not be removed. xfs_ifree() will assert on presence of this leaked remote extent. Signed-off-by: NMark Tinguely <tinguely@sgi.com> Reviewed-by: NBen Myers <bpm@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
- 18 6月, 2013 4 次提交
-
-
由 Jeff Liu 提交于
Remove struct xfs_chash from struct xfs_mount as there is no user of it nowadays. Signed-off-by: NJie Liu <jeff.liu@oracle.com> Reviewed-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Jie Liu 提交于
As per the mount man page, sunit and swidth can be changed via mount options. For XFS, on the face of it, those options seems works if the specified alignments is properly, e.g. # mount -o sunit=4096,swidth=8192 /dev/sdb1 /mnt # mount | grep sdb1 /dev/sdb1 on /mnt type xfs (rw,sunit=4096,swidth=8192) However, neither sunit nor swidth is shown from the xfs_info output. # xfs_info /mnt meta-data=/dev/sdb1 isize=256 agcount=4, agsize=262144 blks = sectsz=512 attr=2 data = bsize=4096 blocks=1048576, imaxpct=25 = sunit=0 swidth=0 blks ^^^^^^^^^^^^^^^^^^^^^^^^^^ naming =version 2 bsize=4096 ascii-ci=0 log =internal bsize=4096 blocks=2560, version=2 = sectsz=512 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 The reason is that the alignment can only be changed if the relevant super block is already configured with alignments, otherwise, the given value is silently ignored. With this fix, the attempt to mount a storage without strip alignment setup on a super block will get an error with a warning in syslog to indicate the true cause, e.g. # mount -o sunit=4096,swidth=8192 /dev/sdb1 /mnt mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so ....... XFS (sdb1): cannot change alignment: superblock does not support data alignment Signed-off-by: NJie Liu <jeff.liu@oracle.com> Cc: Mark Tinguely <tinguely@sgi.com> Cc: Dave Chinner <dchinner@redhat.com> Reviewed-by: NMark Tinguely <tinguely@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Jie Liu 提交于
Commit eab4e633 "xfs: uncached buffer reads need to return an error". Remove redundant error variable, using the function level error variable to store bp->b_error instead. Signed-off-by: NJie Liu <jeff.liu@oracle.com> Reviewed-by: NBen Myers <bpm@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Joe Perches 提交于
This typedef is unnecessary and should just be removed. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NBen Myers <bpm@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
- 15 6月, 2013 1 次提交
-
-
由 Dave Chinner 提交于
Unfortunately, we cannot guarantee that items logged multiple times and replayed by log recovery do not take objects back in time. When they are taken back in time, the go into an intermediate state which is corrupt, and hence verification that occurs on this intermediate state causes log recovery to abort with a corruption shutdown. Instead of causing a shutdown and unmountable filesystem, don't verify post-recovery items before they are written to disk. This is less than optimal, but there is no way to detect this issue for non-CRC filesystems If log recovery successfully completes, this will be undone and the object will be consistent by subsequent transactions that are replayed, so in most cases we don't need to take drastic action. For CRC enabled filesystems, leave the verifiers in place - we need to call them to recalculate the CRCs on the objects anyway. This recovery problem can be solved for such filesystems - we have a LSN stamped in all metadata at writeback time that we can to determine whether the item should be replayed or not. This is a separate piece of work, so is not addressed by this patch. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NBen Myers <bpm@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
- 14 6月, 2013 1 次提交
-
-
由 Dave Chinner 提交于
For CRC enabled filesystems, the BMBT is rooted in an inode, so it passes through a different code path on root splits than the freespace and inode btrees. This is much less traversed by xfstests than the other trees. When testing on a 1k block size filesystem, I've been seeing ASSERT failures in generic/234 like: XFS: Assertion failed: cur->bc_btnum != XFS_BTNUM_BMAP || cur->bc_private.b.allocated == 0, file: fs/xfs/xfs_btree.c, line: 317 which are generally preceded by a lblock check failure. I noticed this in the bmbt stats: $ pminfo -f xfs.btree.block_map xfs.btree.block_map.lookup value 39135 xfs.btree.block_map.compare value 268432 xfs.btree.block_map.insrec value 15786 xfs.btree.block_map.delrec value 13884 xfs.btree.block_map.newroot value 2 xfs.btree.block_map.killroot value 0 ..... Very little coverage of root splits and merges. Indeed, on a 4k filesystem, block_map.newroot and block_map.killroot are both zero. i.e. the code is not exercised at all, and it's the only generic btree infrastructure operation that is not exercised by a default run of xfstests. Turns out that on a 1k filesystem, generic/234 accounts for one of those two root splits, and that is somewhat of a smoking gun. In fact, it's the same problem we saw in the directory/attr code where headers are memcpy()d from one block to another without updating the self describing metadata. Simple fix - when copying the header out of the root block, make sure the block number is updated correctly. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NBen Myers <bpm@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-