1. 07 1月, 2011 38 次提交
    • N
      fs: fs_struct use seqlock · c28cc364
      Nick Piggin 提交于
      Use a seqlock in the fs_struct to enable us to take an atomic copy of the
      complete cwd and root paths. Use this in the RCU lookup path to avoid a
      thread-shared spinlock in RCU lookup operations.
      
      Multi-threaded apps may now perform path lookups with scalability matching
      multi-process apps. Operations such as stat(2) become very scalable for
      multi-threaded workload.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      c28cc364
    • N
      fs: rcu-walk for path lookup · 31e6b01f
      Nick Piggin 提交于
      Perform common cases of path lookups without any stores or locking in the
      ancestor dentry elements. This is called rcu-walk, as opposed to the current
      algorithm which is a refcount based walk, or ref-walk.
      
      This results in far fewer atomic operations on every path element,
      significantly improving path lookup performance. It also avoids cacheline
      bouncing on common dentries, significantly improving scalability.
      
      The overall design is like this:
      * LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk.
      * Take the RCU lock for the entire path walk, starting with the acquiring
        of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are
        not required for dentry persistence.
      * synchronize_rcu is called when unregistering a filesystem, so we can
        access d_ops and i_ops during rcu-walk.
      * Similarly take the vfsmount lock for the entire path walk. So now mnt
        refcounts are not required for persistence. Also we are free to perform mount
        lookups, and to assume dentry mount points and mount roots are stable up and
        down the path.
      * Have a per-dentry seqlock to protect the dentry name, parent, and inode,
        so we can load this tuple atomically, and also check whether any of its
        members have changed.
      * Dentry lookups (based on parent, candidate string tuple) recheck the parent
        sequence after the child is found in case anything changed in the parent
        during the path walk.
      * inode is also RCU protected so we can load d_inode and use the inode for
        limited things.
      * i_mode, i_uid, i_gid can be tested for exec permissions during path walk.
      * i_op can be loaded.
      
      When we reach the destination dentry, we lock it, recheck lookup sequence,
      and increment its refcount and mountpoint refcount. RCU and vfsmount locks
      are dropped. This is termed "dropping rcu-walk". If the dentry refcount does
      not match, we can not drop rcu-walk gracefully at the current point in the
      lokup, so instead return -ECHILD (for want of a better errno). This signals the
      path walking code to re-do the entire lookup with a ref-walk.
      
      Aside from the final dentry, there are other situations that may be encounted
      where we cannot continue rcu-walk. In that case, we drop rcu-walk (ie. take
      a reference on the last good dentry) and continue with a ref-walk. Again, if
      we can drop rcu-walk gracefully, we return -ECHILD and do the whole lookup
      using ref-walk. But it is very important that we can continue with ref-walk
      for most cases, particularly to avoid the overhead of double lookups, and to
      gain the scalability advantages on common path elements (like cwd and root).
      
      The cases where rcu-walk cannot continue are:
      * NULL dentry (ie. any uncached path element)
      * parent with d_inode->i_op->permission or ACLs
      * dentries with d_revalidate
      * Following links
      
      In future patches, permission checks and d_revalidate become rcu-walk aware. It
      may be possible eventually to make following links rcu-walk aware.
      
      Uncached path elements will always require dropping to ref-walk mode, at the
      very least because i_mutex needs to be grabbed, and objects allocated.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      31e6b01f
    • N
      kernel: optimise seqlock · 3c22cd57
      Nick Piggin 提交于
      Add branch annotations for seqlock read fastpath, and introduce
      __read_seqcount_begin and __read_seqcount_end functions, that can avoid the
      smp_rmb() if used carefully. These will be used by store-free path walking
      algorithm performance is critical and seqlocks are in use.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      3c22cd57
    • N
      fs: avoid inode RCU freeing for pseudo fs · ff0c7d15
      Nick Piggin 提交于
      Pseudo filesystems that don't put inode on RCU list or reachable by
      rcu-walk dentries do not need to RCU free their inodes.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      ff0c7d15
    • N
      fs: icache RCU free inodes · fa0d7e3d
      Nick Piggin 提交于
      RCU free the struct inode. This will allow:
      
      - Subsequent store-free path walking patch. The inode must be consulted for
        permissions when walking, so an RCU inode reference is a must.
      - sb_inode_list_lock to be moved inside i_lock because sb list walkers who want
        to take i_lock no longer need to take sb_inode_list_lock to walk the list in
        the first place. This will simplify and optimize locking.
      - Could remove some nested trylock loops in dcache code
      - Could potentially simplify things a bit in VM land. Do not need to take the
        page lock to follow page->mapping.
      
      The downsides of this is the performance cost of using RCU. In a simple
      creat/unlink microbenchmark, performance drops by about 10% due to inability to
      reuse cache-hot slab objects. As iterations increase and RCU freeing starts
      kicking over, this increases to about 20%.
      
      In cases where inode lifetimes are longer (ie. many inodes may be allocated
      during the average life span of a single inode), a lot of this cache reuse is
      not applicable, so the regression caused by this patch is smaller.
      
      The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU,
      however this adds some complexity to list walking and store-free path walking,
      so I prefer to implement this at a later date, if it is shown to be a win in
      real situations. I haven't found a regression in any non-micro benchmark so I
      doubt it will be a problem.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      fa0d7e3d
    • N
      fs: consolidate dentry kill sequence · 77812a1e
      Nick Piggin 提交于
      The tricky locking for disposing of a dentry is duplicated 3 times in the
      dcache (dput, pruning a dentry from the LRU, and pruning its ancestors).
      Consolidate them all into a single function dentry_kill.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      77812a1e
    • N
      ec33679d
    • N
      fs: reduce dcache_inode_lock width in lru scanning · be182bff
      Nick Piggin 提交于
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      be182bff
    • N
      fs: dcache reduce prune_one_dentry locking · 89e60548
      Nick Piggin 提交于
      prune_one_dentry can avoid quite a bit of locking in the common case where
      ancestors have an elevated refcount. Alternatively, we could have gone the
      other way and made fewer trylocks in the case where d_count goes to zero, but
      is probably less common.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      89e60548
    • N
      fs: dcache reduce d_parent locking · a734eb45
      Nick Piggin 提交于
      Use RCU to simplify locking in dget_parent.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      a734eb45
    • N
      fs: dcache rationalise dget variants · dc0474be
      Nick Piggin 提交于
      dget_locked was a shortcut to avoid the lazy lru manipulation when we already
      held dcache_lock (lru manipulation was relatively cheap at that point).
      However, how that the lru lock is an innermost one, we never hold it at any
      caller, so the lock cost can now be avoided. We already have well working lazy
      dcache LRU, so it should be fine to defer LRU manipulations to scan time.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      dc0474be
    • N
      fs: dcache reduce dcache_inode_lock · 357f8e65
      Nick Piggin 提交于
      dcache_inode_lock can be avoided in d_delete() and d_materialise_unique()
      in cases where it is not required.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      357f8e65
    • N
      fs: dcache reduce locking in d_alloc · 89ad485f
      Nick Piggin 提交于
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      89ad485f
    • N
      fs: dcache reduce dput locking · 61f3dee4
      Nick Piggin 提交于
      It is possible to run dput without taking data structure locks up-front. In
      many cases where we don't kill the dentry anyway, these locks are not required.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      61f3dee4
    • N
      fs: dcache avoid starvation in dcache multi-step operations · 58db63d0
      Nick Piggin 提交于
      Long lived dcache "multi-step" operations which retry on rename seq can
      be starved with a lot of rename activity. If they fail after the 1st pass,
      take the rename_lock for writing to avoid further starvation.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      58db63d0
    • N
      fs: dcache remove dcache_lock · b5c84bf6
      Nick Piggin 提交于
      dcache_lock no longer protects anything. remove it.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      b5c84bf6
    • N
      fs: Use rename lock and RCU for multi-step operations · 949854d0
      Nick Piggin 提交于
      The remaining usages for dcache_lock is to allow atomic, multi-step read-side
      operations over the directory tree by excluding modifications to the tree.
      Also, to walk in the leaf->root direction in the tree where we don't have
      a natural d_lock ordering.
      
      This could be accomplished by taking every d_lock, but this would mean a
      huge number of locks and actually gets very tricky.
      
      Solve this instead by using the rename seqlock for multi-step read-side
      operations, retry in case of a rename so we don't walk up the wrong parent.
      Concurrent dentry insertions are not serialised against.  Concurrent deletes
      are tricky when walking up the directory: our parent might have been deleted
      when dropping locks so also need to check and retry for that.
      
      We can also use the rename lock in cases where livelock is a worry (and it
      is introduced in subsequent patch).
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      949854d0
    • N
      fs: increase d_name lock coverage · 9abca360
      Nick Piggin 提交于
      Cover d_name with d_lock in more cases, where there may be concurrent
      modification to it.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      9abca360
    • N
      fs: scale inode alias list · b23fb0a6
      Nick Piggin 提交于
      Add a new lock, dcache_inode_lock, to protect the inode's i_dentry list
      from concurrent modification. d_alias is also protected by d_lock.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      b23fb0a6
    • N
      fs: dcache scale subdirs · 2fd6b7f5
      Nick Piggin 提交于
      Protect d_subdirs and d_child with d_lock, except in filesystems that aren't
      using dcache_lock for these anyway (eg. using i_mutex).
      
      Note: if we change the locking rule in future so that ->d_child protection is
      provided only with ->d_parent->d_lock, it may allow us to reduce some locking.
      But it would be an exception to an otherwise regular locking scheme, so we'd
      have to see some good results. Probably not worthwhile.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      2fd6b7f5
    • N
      fs: dcache scale d_unhashed · da502956
      Nick Piggin 提交于
      Protect d_unhashed(dentry) condition with d_lock. This means keeping
      DCACHE_UNHASHED bit in synch with hash manipulations.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      da502956
    • N
      fs: dcache scale dentry refcount · b7ab39f6
      Nick Piggin 提交于
      Make d_count non-atomic and protect it with d_lock. This allows us to ensure a
      0 refcount dentry remains 0 without dcache_lock. It is also fairly natural when
      we start protecting many other dentry members with d_lock.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      b7ab39f6
    • N
      fs: dcache scale lru · 23044507
      Nick Piggin 提交于
      Add a new lock, dcache_lru_lock, to protect the dcache LRU list from concurrent
      modification. d_lru is also protected by d_lock, which allows LRU lists to be
      accessed without the lru lock, using RCU in future patches.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      23044507
    • N
      fs: dcache scale hash · 789680d1
      Nick Piggin 提交于
      Add a new lock, dcache_hash_lock, to protect the dcache hash table from
      concurrent modification. d_hash is also protected by d_lock.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      789680d1
    • N
      hostfs: simplify locking · ec2447c2
      Nick Piggin 提交于
      Remove dcache_lock locking from hostfs filesystem, and move it into dcache
      helpers. All that is required is a coherent path name. Protection from
      concurrent modification of the namespace after path name generation is not
      provided in current code, because dcache_lock is dropped before the path is
      used.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      ec2447c2
    • N
      fs: change d_hash for rcu-walk · b1e6a015
      Nick Piggin 提交于
      Change d_hash so it may be called from lock-free RCU lookups. See similar
      patch for d_compare for details.
      
      For in-tree filesystems, this is just a mechanical change.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      b1e6a015
    • N
      fs: change d_compare for rcu-walk · 621e155a
      Nick Piggin 提交于
      Change d_compare so it may be called from lock-free RCU lookups. This
      does put significant restrictions on what may be done from the callback,
      however there don't seem to have been any problems with in-tree fses.
      If some strange use case pops up that _really_ cannot cope with the
      rcu-walk rules, we can just add new rcu-unaware callbacks, which would
      cause name lookup to drop out of rcu-walk mode.
      
      For in-tree filesystems, this is just a mechanical change.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      621e155a
    • N
      fs: name case update method · fb2d5b86
      Nick Piggin 提交于
      smpfs and ncpfs want to update a live dentry name in-place. Rather than
      have them open code the locking, provide a documented dcache API.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      fb2d5b86
    • N
      jfs: dont overwrite dentry name in d_revalidate · 2bc334dc
      Nick Piggin 提交于
      Use vfat's method for dealing with negative dentries to preserve case,
      rather than overwrite dentry name in d_revalidate, which is a bit ugly
      and also gets in the way of doing lock-free path walking.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      2bc334dc
    • N
      cifs: dont overwrite dentry name in d_revalidate · 79eb4dde
      Nick Piggin 提交于
      Use vfat's method for dealing with negative dentries to preserve case,
      rather than overwrite dentry name in d_revalidate, which is a bit ugly
      and also gets in the way of doing lock-free path walking.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      79eb4dde
    • N
      fs: change d_delete semantics · fe15ce44
      Nick Piggin 提交于
      Change d_delete from a dentry deletion notification to a dentry caching
      advise, more like ->drop_inode. Require it to be constant and idempotent,
      and not take d_lock. This is how all existing filesystems use the callback
      anyway.
      
      This makes fine grained dentry locking of dput and dentry lru scanning
      much simpler.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      fe15ce44
    • N
      fs: dcache documentation cleanup · 5eef7fa9
      Nick Piggin 提交于
      Remove redundant (and incorrect, since dcache RCU lookup) dentry locking
      documentation and point to the canonical document.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      5eef7fa9
    • N
      config fs: avoid switching ->d_op on live dentry · fbc8d4c0
      Nick Piggin 提交于
      Switching d_op on a live dentry is racy in general, so avoid it. In this case
      it is a negative dentry, which is safer, but there are still concurrent ops
      which may be called on d_op in that case (eg. d_revalidate). So in general
      a filesystem may not do this. Fix configfs so as not to do this.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      fbc8d4c0
    • N
      cgroup fs: avoid switching ->d_op on live dentry · 5adcee1d
      Nick Piggin 提交于
      Switching d_op on a live dentry is racy in general, so avoid it. In this case
      it is a negative dentry, which is safer, but there are still concurrent ops
      which may be called on d_op in that case (eg. d_revalidate). So in general
      a filesystem may not do this. Fix cgroupfs so as not to do this.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      5adcee1d
    • N
      fs: use fast counters for vfs caches · 3e880fb5
      Nick Piggin 提交于
      percpu_counter library generates quite nasty code, so unless you need
      to dynamically allocate counters or take fast approximate value, a
      simple per cpu set of counters is much better.
      
      The percpu_counter can never be made to work as well, because it has an
      indirection from pointer to percpu memory, and it can't use direct
      this_cpu_inc interfaces because it doesn't use static PER_CPU data, so
      code will always be worse.
      
      In the fastpath, it is the difference between this:
      
              incl %gs:nr_dentry      # nr_dentry
      
      and this:
      
              movl    percpu_counter_batch(%rip), %edx        # percpu_counter_batch,
              movl    $1, %esi        #,
              movq    $nr_dentry, %rdi        #,
              call    __percpu_counter_add    # (plus I clobber registers)
      
      __percpu_counter_add:
              pushq   %rbp    #
              movq    %rsp, %rbp      #,
              subq    $32, %rsp       #,
              movq    %rbx, -24(%rbp) #,
              movq    %r12, -16(%rbp) #,
              movq    %r13, -8(%rbp)  #,
              movq    %rdi, %rbx      # fbc, fbc
      #APP
      # 216 "/home/npiggin/usr/src/linux-2.6/arch/x86/include/asm/thread_info.h" 1
              movq %gs:kernel_stack,%rax      #, pfo_ret__
      # 0 "" 2
      #NO_APP
              incl    -8124(%rax)     # <variable>.preempt_count
              movq    32(%rdi), %r12  # <variable>.counters, tcp_ptr__
      #APP
      # 78 "lib/percpu_counter.c" 1
              add %gs:this_cpu_off, %r12      # this_cpu_off, tcp_ptr__
      # 0 "" 2
      #NO_APP
              movslq  (%r12),%r13     #* tcp_ptr__, tmp73
              movslq  %edx,%rax       # batch, batch
              addq    %rsi, %r13      # amount, count
              cmpq    %rax, %r13      # batch, count
              jge     .L27    #,
              negl    %edx    # tmp76
              movslq  %edx,%rdx       # tmp76, tmp77
              cmpq    %rdx, %r13      # tmp77, count
              jg      .L28    #,
      .L27:
              movq    %rbx, %rdi      # fbc,
              call    _raw_spin_lock  #
              addq    %r13, 8(%rbx)   # count, <variable>.count
              movq    %rbx, %rdi      # fbc,
              movl    $0, (%r12)      #,* tcp_ptr__
              call    _raw_spin_unlock        #
      .L29:
      #APP
      # 216 "/home/npiggin/usr/src/linux-2.6/arch/x86/include/asm/thread_info.h" 1
              movq %gs:kernel_stack,%rax      #, pfo_ret__
      # 0 "" 2
      #NO_APP
              decl    -8124(%rax)     # <variable>.preempt_count
              movq    -8136(%rax), %rax       #, D.14625
              testb   $8, %al #, D.14625
              jne     .L32    #,
      .L31:
              movq    -24(%rbp), %rbx #,
              movq    -16(%rbp), %r12 #,
              movq    -8(%rbp), %r13  #,
              leave
              ret
              .p2align 4,,10
              .p2align 3
      .L28:
              movl    %r13d, (%r12)   # count,*
              jmp     .L29    #
      .L32:
              call    preempt_schedule        #
              .p2align 4,,6
              jmp     .L31    #
              .size   __percpu_counter_add, .-__percpu_counter_add
              .p2align 4,,15
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      3e880fb5
    • N
      vfs: revert per-cpu nr_unused counters for dentry and inodes · 86c8749e
      Nick Piggin 提交于
      The nr_unused counters count the number of objects on an LRU, and as such they
      are synchronized with LRU object insertion and removal and scanning, and
      protected under the LRU lock.
      
      Making it per-cpu does not actually get any concurrency improvements because of
      this lock, and summing the counter is much slower, and
      incrementing/decrementing it costs more code size and is slower too.
      
      These counters should stay per-LRU, which currently means global.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      86c8749e
    • N
      kernel: kmem_ptr_validate considered harmful · ccd35fb9
      Nick Piggin 提交于
      This is a nasty and error prone API. It is no longer used, remove it.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      ccd35fb9
    • N
      fs: d_validate fixes · 786a5e15
      Nick Piggin 提交于
      d_validate has been broken for a long time.
      
      kmem_ptr_validate does not guarantee that a pointer can be dereferenced
      if it can go away at any time. Even rcu_read_lock doesn't help, because
      the pointer might be queued in RCU callbacks but not executed yet.
      
      So the parent cannot be checked, nor the name hashed. The dentry pointer
      can not be touched until it can be verified under lock. Hashing simply
      cannot be used.
      
      Instead, verify the parent/child relationship by traversing parent's
      d_child list. It's slow, but only ncpfs and the destaged smbfs care
      about it, at this point.
      Signed-off-by: NNick Piggin <npiggin@kernel.dk>
      786a5e15
  2. 05 1月, 2011 2 次提交