- 31 8月, 2007 37 次提交
-
-
由 Ralf Baechle 提交于
We better select a font when the newport driver is a module or the user experience might suffer. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Kara 提交于
Fix possible NULL pointer dereference when freeing blocks in case table of free space is used. Also fix handling of the case when we need to move extent from one block to another one to make space for indirect extent. BTW: Nobody seem to have ever used this code. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Kara 提交于
If UDF superblock is incorrect, we can fail to find a table of free / allocated space and consequently Oops. Handle this situation more gracefully by ignoring the broken UDF partition. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 KAMEZAWA Hiroyuki 提交于
In migration fallback path, write_page() or lock_page() will be called. This causes sleep with holding rcu_read_lock(). For avoding that, just do rcu_lock if the page is Anon.(this is enough.) Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Dike 提交于
Stop UML crashing when trying to dump a process core on x86_64. This is the minimal fix to stop the crash - more things are broken here, and patches are forthcoming. The immediate thing to do is define ELF_CORE_COPY_REGS and ELF_CORE_COPY_FPREGS. Defining ELF_CORE_COPY_FPREGS allows dump_fpu to go away. It is defined in terms of save_fp_registers, so that needs to be added. Signed-off-by: NJeff Dike <jdike@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Dike 提交于
Fix a class of bugs in the UML linker scripts which caused section boundary variables to sometimes not line up with their sections. Signed-off-by: NJeff Dike <jdike@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
Don't try to free memory which we didn't allocate. Acked-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
This patch got appied twice. Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Lameter 提交于
Some compilers (especially older gcc releases) may skip inlining sometimes which will lead to link failures. Force the inlining of keyfunctions in slub_def.h to avoid these issues. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Acked-by: NJan Dittmer <jdi@l4x.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix several bugs in MSI handling. [SPARC64]: Fix type and constant sizes wrt. sun4u IMAP/ICLR handling.
-
由 Linus Torvalds 提交于
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [PKTGEN]: Remove write-only variable. [NETFILTER]: xt_tcpudp: fix wrong struct in udp_checkentry [NET_SCHED] sch_prio.c: remove duplicate call of tc_classify() [BRIDGE]: Fix OOPS when bridging device without ethtool. [BRIDGE]: Packets leaking out of disabled/blocked ports. [TCP]: Allow minimum RTO to be configurable via routing metrics. SCTP: Fix to handle invalid parameter length correctly SCTP: Abort on COOKIE-ECHO if backlog is exceeded. SCTP: Correctly disable listening when backlog is 0. SCTP: Do not retransmit chunks that are newer then rtt. SCTP: Uncomfirmed transports can't become Inactive SCTP: Pick the correct port when binding to 0. SCTP: Use net_ratelimit to suppress error messages print too fast SCTP: Fix to encode PROTOCOL VIOLATION error cause correctly SCTP: Fix sctp_addto_chunk() to add pad with correct length SCTP: Assign stream sequence numbers to the entire message SCTP: properly clean up fragment and ordering queues during FWD-TSN. [PKTGEN]: Fix multiqueue oops. [BNX2]: Add write posting comment. [BNX2]: Use msleep().
-
由 David S. Miller 提交于
1) sun4{u,v}_build_msi() have improper return value handling. We should always return negative error codes, instead of using the magic value "0" which could in fact be a valid MSI number. 2) sun4{u,v}_build_msi() should return -ENOMEM instead of calling prom_prom() halt with kzalloc() of the interrupt data fails. 3) We 'remembered' the MSI number using a singleton in the struct device archdata area, this doesn't work for MSI-X which can cause multiple MSIs assosciated with one device. Delete that archdata member, and instead store the MSI number in the IRQ chip data area. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Sometimes we were using 32-bit values and the top bits were getting inadvertantly chopped off. This will matter for the forthcoming Fire controller MSI support. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The pktgen_thread.pid is set to current->pid and is never used after this. So remove this at all. Found during isolating the explicit pid/tgid usage. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Acked-by: NSukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesper Bengtsson 提交于
It doesn't seem to have any effect on the x86 architecture but it does have effect on the Axis CRIS architecture. Signed-off-by: NJesper Bengtsson <jesper.bengtsson@axis.com> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lucas Nussbaum 提交于
When CONFIG_NET_CLS_ACT is enabled, tc_classify() is called twice in prio_classify(). This causes "interesting" behaviour: with the setup below, packets are duplicated, sent twice to ifb0, and then loop in and out of ifb0. The patch uses the previously calculated return value in the switch, which is probably what Patrick had in mind in commit bdba91ec -- maybe Patrick can double-check this? -- example setup -- ifconfig ifb0 up tc qdisc add dev ifb0 root netem delay 2s tc qdisc add dev $ETH root handle 1: prio tc filter add dev $ETH parent 1: protocol ip prio 10 u32 \ match ip dst 172.24.110.6/32 flowid 1:1 \ action mirred egress redirect dev ifb0 ping -c1 172.24.110.6 Signed-off-by: NLucas Nussbaum <lucas.nussbaum@imag.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Starikovskiy 提交于
acpi_get_devices() returns success if it did not find any device. We have to check for this case. Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de> Tested-by: NDaniel Ritz <daniel.ritz-ml@swissonline.ch> Tested-by: NLuca <kronos.it@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stephen Hemminger 提交于
Bridge code calls ethtool to get speed. The conversion to using only ethtool_ops broke the case of devices without ethtool_ops. This is a new regression in 2.6.23. Rearranged the switch to a logical order, and use gcc initializer. Ps: speed should have been part of the network device structure from the start rather than burying it in ethtool. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Acked-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
This patch fixes some packet leakage in bridge. The bridging code was allowing forward table entries to be generated even if a device was being blocked. The fix is to not add forwarding database entries unless the port is active. The bug arose as part of the conversion to processing STP frames through normal receive path (in 2.6.17). Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Acked-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
-
由 David S. Miller 提交于
Cell phone networks do link layer retransmissions and other things that cause unnecessary timeout retransmits. So allow the minimum RTO to be inflated per-route to deal with this. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6: SELinux: clear parent death signal on SID transitions
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: psmouse - make dummy touchkit_ps2_detect() static Input: gscps2 - convert to use kzalloc Input: iforce - fix 'unused variable' warning Input: i8042 - fix retrun value of i8042_aux_test_irq Input: gpio_keys - remove duplicate includes
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4561/1: i.MX/MX1 GPIO parenthes omission and input setup fix [ARM] 4557/1: Fix PXA irq gpio initialization [ARM] 4551/1: s3c24xx: fix wrong virtual address offsets [ARM] 4552/1: i.MX/MX1 GPIO output setup fix [ARM] 4553/1: ARM at91: define FIQ_START [ARM] 4554/1: replace consistent_sync() with flush_ioremap_region() ARM: OMAP: Enable serial idling and wakeup features ARM: OMAP2: Force APLLs always active ARM: OMAP: H3 workqueue fixes ARM: OMAP: OSK led fixes ARM: OMAP: fix OMAP1 dmtimer build warning ARM: OMAP: Fix 32k timer unsupported one-shot mode
-
由 Hugh Dickins 提交于
Alexey Dobriyan reports that maxcpus=1 is still broken in 2.6.23-rc4: if CONFIG_HOTPLUG_CPU is not set, x86_64 bootup oopses in show_stat() - for_each_possible_cpu accesses a per-cpu area which was never set up. Alexey identified commit 61ec7567 (ACPI: boot correctly with "nosmp" or "maxcpus=0") as the origin; but it's not really to blame, just exposes a bug in 2.6.23-rc1's commit 8b3b2955 (Especially when !CONFIG_HOTPLUG_CPU, avoid needlessy allocating resources for CPUs that can never become available). rc1's test for max_cpus < 2 in start_kernel() wasn't working because max_cpus was still NR_CPUS at that point: until rc4 moved the maxcpus parsing earlier. Now it sets cpu_possible_map to 1 before allocating all possible per-cpu areas; then smp_init() expands cpu_possible_map to cpu_present_map (0xf in my case) later on. rc1's commit has good intentions, but expects cpu_present_map to be limited by maxcpus, which is only the case on i386. cpus_and(possible, possible,present) might be good, but needs an audit of cpu_present_map uses - there may well be assumptions that any cpu present is possible. So stay safe for now and just revert those #ifndef CONFIG_HOTPLUG_CPU optimizations in rc1's commit. Signed-off-by: NHugh Dickins <hugh@veritas.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Len Brown <lenb@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jan Beulich <jbeulich@novell.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stephen Smalley 提交于
Clear parent death signal on SID transitions to prevent unauthorized signaling between SIDs. Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov> Acked-by: NEric Paris <eparis@parisplace.org> Signed-off-by: NJames Morris <jmorris@localhost.localdomain>
-
由 Wei Yongjun 提交于
If an INIT with invalid parameter length look like this: Parameter Type : 1 Parameter Length: 800 and not contain any payload, SCTP will ignore this parameter and send back a INIT-ACK. This patch is fix to handle this invalid parameter length correctly. Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 Vlad Yasevich 提交于
Currently we abort on the INIT chunk we our backlog is currenlty exceeded. Delay this about untill COOKIE-ECHO to give the user time to accept the socket. Also, make sure that we treat sk_max_backlog of 0 as no connections allowed. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 Vlad Yasevich 提交于
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 Vlad Yasevich 提交于
When performing a retransmit, do not include the chunk if it was sent less then 1 rtt ago. The reason is that we may receive the SACK very soon and wouldn't retransmit. Suggested by Randy Stewart. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 Vlad Yasevich 提交于
Do not set Unconfirmed transports to Inactive state. This may result in an inactive association being destroyed since we start counting errors on "inactive" transports against the association. This was found at the SCTP interop event. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 Vlad Yasevich 提交于
sctp_bindx() allows the use of unspecified port. The problem is that every address we bind to ends up selecting a new port if the user specified port 0. This patch allows re-use of the already selected port when the port from bindx was 0. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 Wei Yongjun 提交于
When multi bundling SHUTDOWN-ACK message is received in ESTAB state, this will cause "sctp protocol violation state" message print many times. If SHUTDOWN-ACK is bundled 300 times in one packet, message will be print 300 times. The same problem also exists when received unexpected HEARTBEAT-ACK message which is bundled message times. This patch used net_ratelimit() to suppress error messages print too fast. Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 Wei Yongjun 提交于
PROTOCOL VIOLATION error cause in ABORT is bad encode when make abort chunk. When SCTP encode ABORT chunk with PROTOCOL VIOLATION error cause, it just add the error messages to PROTOCOL VIOLATION error cause, the rest four bytes(struct sctp_paramhdr) is just add to the chunk, not change the length of error cause. This cause the ABORT chunk to be a bad format. The chunk is like this: ABORT chunk Chunk type: ABORT (6) Chunk flags: 0x00 Chunk length: 72 (*1) Protocol violation cause Cause code: Protocol violation (0x000d) Cause length: 62 (*2) Cause information: 5468652063756D756C61746976652074736E2061636B2062... Cause padding: 0000 [Needless] 00030010 Chunk Length(*1) = 72 but Cause length(*2) only 62, not include the extend 4 bytes. ((72 - sizeof(chunk_hdr)) = 68) != (62 +3) / 4 * 4 Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] PS3: Fix bug where the major version part is not compared [POWERPC] Update defconfigs [POWERPC] spufs: Don't call spu_run_init from spu_reacquire_runnable [POWERPC] spufs: Fix update of mailbox status register during backed wbox write [POWERPC] spu_manage: fix spu_unit_number for celleb device tree [POWERPC] Update defconfigs [POWERPC] Flush registers to proper task context
-
由 Adrian Bunk 提交于
Another fallout from the removal of #include <linux/fs.h> from mm.h Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rusty Russell 提交于
If the stack pointer is 0xc057a000, then the first stack page is at 0xc0579000 (the stack pointer is decremented before use). Not calculating this correctly caused guests with CONFIG_DEBUG_PAGEALLOC=y to be killed with a "bad stack page" message: the initial kernel stack was just proceeding the .smp_locks section which CONFIG_DEBUG_PAGEALLOC marks read-only when freeing. Thanks to Frederik Deweerdt for the bug report! Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 8月, 2007 3 次提交
-
-
由 Wei Yongjun 提交于
At function sctp_addto_chunk(), it do pad before add payload to chunk if chunk length is not 4-byte alignment. But it do pad with a bad length. This patch fixed this probleam. Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 Masakazu Mokuno 提交于
Fix the bug that the major version part of the firmware version number is ignored in the comparison done by ps3_compare_firmware_version because the difference of two 64-bit quantities is returned as an int. Signed-off-by: NMasakazu Mokuno <mokuno@sm.sony.co.jp> Acked-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Pavel Pisa 提交于
During GPIO testing on PiMX1 board there has been revealed problem with some pins input functions. The GIUS bit has to be set for inputs to work reliably too. It is surprising that input worked on some inputs with incorrect setup before. DR is not mandatory, but it ensures stable constant level on internal traces. Signed-off-by: NPavel Pisa <pisa@cmp.felk.cvut.cz> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-