- 01 2月, 2012 16 次提交
-
-
由 Stanislav Kinsbursky 提交于
This patch is a final step towards to removing PipeFS inode references from kernel code other than PipeFS itself. It makes all kernel SUNRPC PipeFS users depends on pipe private data, which state depend on their specific operations, etc. This patch completes SUNRPC PipeFS preparations and allows to create pipe private data and PipeFS dentries independently. Next step will be making SUNPRC PipeFS dentries allocated by SUNRPC PipeFS network namespace aware routines. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Stanislav Kinsbursky 提交于
Currently gss auth holds RPC inode pointer which is now redundant since it requires only pipes operations which takes private pipe data as an argument. Thus this code can be cleaned and all references to RPC inode can be replaced with privtae pipe data references. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Stanislav Kinsbursky 提交于
RPC pipe upcall doesn't requires only private pipe data. Thus RPC inode references in this code can be removed. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Stanislav Kinsbursky 提交于
This patch removes redundant RPC inode references from PipeFS. These places are actually where pipes operations are performed. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Stanislav Kinsbursky 提交于
Generally, pipe data is used only for pipes, and thus allocating space for it on every RPC inode allocation is redundant. This patch splits private SUNRPC PipeFS pipe data and inode, makes pipe data allocated only for pipe inodes. This patch is also is a next step towards to to removing PipeFS inode references from kernel code other than PipeFS itself. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Stanislav Kinsbursky 提交于
Currenly, inode i_lock is used to provide concurrent access to SUNPRC PipeFS pipes. It looks redundant, since now other use of inode is present in most of these places and thus can be easely replaced, which will allow to remove most of inode references from PipeFS code. This is a first step towards to removing PipeFS inode references from kernel code other than PipeFS itself. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Stanislav Kinsbursky 提交于
This patch adds debug messages for notification events. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Stanislav Kinsbursky 提交于
During per-net pipes creation and destruction we have to make sure, that pipefs sb exists for the whole creation/destruction cycle. This is done by using special mutex which controls pipefs sb reference on network namespace context. Helper consists of two parts: first of them (rpc_get_dentry_net) searches for dentry with specified name and returns with mutex taken on success. When pipe creation or destructions is completed, caller should release this mutex by rpc_put_dentry_net call. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Stanislav Kinsbursky 提交于
We have modules (like, pNFS blocklayout module) which creates pipes on rpc_pipefs. Thus we need per-net operations for them. To make it possible we require appropriate super block. So we have to put sb link on network namespace context. Note, that it's not strongly required to create pipes in per-net operations. IOW, if pipefs wasn't mounted yet, that no sb link reference will present on network namespace and in this case we need just need to pass through pipe creation. Pipe dentry will be created during pipefs mount notification. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Stanislav Kinsbursky 提交于
In all places, where pipefs dentries are created, only directory inode is actually required to create new dentry. And all this directories has root pipefs dentry as their parent. So we actually don't need this pipefs mount point at all if some pipefs lookup method will be provided. IOW, all we really need is just superblock and simple lookup method to find root's child dentry with appropriate name. And this patch introduces this method. Note, that no locking implemented in rpc_d_lookup_sb(). So it can be used only in case of assurance, that pipefs superblock still exist. IOW, we can use this method only in pipefs mount-umount notification subscribers callbacks. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Stanislav Kinsbursky 提交于
They will be used to notify subscribers about pipefs superblock creation and destruction. Subcribers will have to create their dentries on passed superblock on mount event and destroy otherwise. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Stanislav Kinsbursky 提交于
We want to be sure that network namespace is still alive while we have pipefs mounted. This will be required later, when RPC pipefs will be mounting only from user-space context. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Stanislav Kinsbursky 提交于
This is the initial step of RPC pipefs virtualization. It changes nothing to current pipefs behaviour except that mount of pipefs in other than init_net network namespace context will provide only root tree. No other dentries will be visible. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Stanislav Kinsbursky 提交于
This patch-set was created in context of clone of git branch: git://git.linux-nfs.org/projects/trondmy/nfs-2.6.git. v2: 1) Rebased of current repo state (i.e. all commits were pulled before apply) I feel it is ready for inclusion if no objections will appear. SUNRPC pipefs non-exclusive pipe creation code looks obsolete. IOW, as I see it, all pipes are creating with unique full path and only once. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Linus Torvalds 提交于
-
git://github.com/prasad-joshi/logfs_upstream由 Linus Torvalds 提交于
There are few important bug fixes for LogFS * tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream: Logfs: Allow NULL block_isbad() methods logfs: Grow inode in delete path logfs: Free areas before calling generic_shutdown_super() logfs: remove useless BUG_ON MAINTAINERS: Add Prasad Joshi in LogFS maintiners logfs: Propagate page parameter to __logfs_write_inode logfs: set superblock shutdown flag after generic sb shutdown logfs: take write mutex lock during fsync and sync logfs: Prevent memory corruption logfs: update page reference count for pined pages Fix up conflict in fs/logfs/dev_mtd.c due to semantic change in what "mtd->block_isbad" means in commit f2933e86: "Logfs: Allow NULL block_isbad() methods" clashing with the abstraction changes in the commits 7086c19d: "mtd: introduce mtd_block_isbad interface" and d58b27ed: "logfs: do not use 'mtd->block_isbad' directly". This resolution takes the semantics from commit f2933e86, and just makes mtd_block_isbad() return zero (false) if the 'block_isbad' function is NULL. But that also means that now "mtd_can_have_bb()" always returns 0. Now, "mtd_block_markbad()" will obviously return an error if the low-level driver doesn't support bad blocks, so this is somewhat non-symmetric, but it actually makes sense if a NULL "block_isbad" function is considered to mean "I assume that all my blocks are always good".
-
- 31 1月, 2012 14 次提交
-
-
由 Linus Torvalds 提交于
Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (w83627ehf) Disable setting DC mode for pwm2, pwm3 on NCT6776F hwmon: (sht15) fix bad error code MAINTAINERS: Drop maintainer for MAX1668 hwmon driver MAINTAINERS: Add hwmon entries for Wolfson hwmon: (f71805f) Fix clamping of temperature limits
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl由 Linus Torvalds 提交于
Here are some fixes to the pin control system that has accumulated since -rc1. Mainly Tony Lindgren fixed the module load/unload logic and the rest are minor fixes and documentation. * 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: add checks for empty function names pinctrl: fix pinmux_hog_maps when ctrl_dev_name is not set pinctrl: fix some pinmux typos pinctrl: free debugfs entries when unloading a pinmux driver pinctrl: unbreak error messages Documentation/pinctrl: fix a few syntax errors in code examples pinctrl: fix pinconf_pins_show iteration
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Here are some tty/serial patches for 3.3-rc1 Big thing here is the movement of the 8250 serial drivers to their own directory, now that the patch churn has calmed down. Other than that, only minor stuff (omap patches were reverted as they were found to be wrong), and another broken driver removed from the system. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> * tag 'tty-3.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: Kill off Moorestown code Revert "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA mode" Revert "tty: serial: OMAP: transmit FIFO threshold interrupts don't wake the chip" serial: Fix wakeup init logic to speed up startup docbook: don't use serial_core.h in device-drivers book serial: amba-pl011: lock console writes against interrupts amba-pl011: do not disable RTS during shutdown tty: serial: OMAP: transmit FIFO threshold interrupts don't wake the chip tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA mode omap-serial: make serial_omap_restore_context depend on CONFIG_PM_RUNTIME omap-serial :Make the suspend/resume functions depend on CONFIG_PM_SLEEP. TTY: fix UV serial console regression jsm: Fixed EEH recovery error Updated TTY MAINTAINERS info serial: group all the 8250 related code together
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Here are a bunch of USB patches for 3.3-rc1. Nothing major, largest thing here is the removal of some drivers that did not work at all. Other than that, the normal collection of bugfixes and new device ids. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> * tag 'usb-3.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (52 commits) uwb & wusb: fix kconfig error USB: Realtek cr: fix autopm scheduling while atomic USB: ftdi_sio: Add more identifiers xHCI: Cleanup isoc transfer ring when TD length mismatch found usb: musb: omap2430: minor cleanups. qcaux: add more Pantech UML190 and UML290 ports Revert "drivers: usb: Fix dependency for USB_HWA_HCD" usb: mv-otg - Fix build if CONFIG_USB is not set USB: cdc-wdm: Avoid hanging on interface with no USB_CDC_DMM_TYPE usb: add support for STA2X11 host driver drivers: usb: Fix dependency for USB_HWA_HCD kernel-doc: fix new warning in usb.h USB: OHCI: fix new compiler warnings usb: serial: kobil_sct: fix compile warning: drivers/usb/host/ehci-fsl.c: add missing iounmap USB: cdc-wdm: better allocate a buffer that is at least as big as we tell the USB core USB: cdc-wdm: call wake_up_all to allow driver to shutdown on device removal USB: cdc-wdm: use two mutexes to allow simultaneous read and write USB: cdc-wdm: updating desc->length must be protected by spin_lock USB: usbsevseg: fix max length ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
1) Setting link attributes can modify the size of the attributes that would be reported on a subsequent getlink netlink operation, therefore min_ifinfo_dump_size needs to be adjusted. From Stefan Gula. 2) Resegmentation of TSO frames while trimming can violate invariants expected by callers, namely that the number of segments can only stay the same or decrease, never increase. If MSS changes, however, we can trim data but then end up with more segments. Fix this by only segmenting to the MSS already recorded in the SKB. That's the simplest fix for now and if we want to get more fancy in the future that's a more involved change. This probably explains some retransmit counter inaccuracies. From Neal Cardwell. 3) Fix too-many-wakeups in POLL with AF_UNIX sockets, from Eric Dumazet. 4) Fix CAIF crashes wrt. namespace handling. From Eric Dumazet and Eric W. Biederman. 5) TCP port selection fixes from Flavio Leitner. 6) More socket memory cgroup build fixes in certain randonfig situations. From Glauber Costa. 7) Fix TCP memory sysctl regression reported by Ingo Molnar, also from Glauber Costa. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: af_unix: fix EPOLLET regression for stream sockets tcp: fix tcp_trim_head() to adjust segment count with skb MSS net/tcp: Fix tcp memory limits initialization when !CONFIG_SYSCTL net caif: Register properly as a pernet subsystem. netns: Fail conspicously if someone uses net_generic at an inappropriate time. net: explicitly add jump_label.h header to sock.h net: RTNETLINK adjusting values of min_ifinfo_dump_size ipv6: Fix ip_gre lockless xmits. xen-netfront: correct MAX_TX_TARGET calculation. netns: fix net_alloc_generic() tcp: bind() optimize port allocation tcp: bind() fix autoselection to share ports l2tp: l2tp_ip - fix possible oops on packet receive iwlwifi: fix PCI-E transport "inta" race mac80211: set bss_conf.idle when vif is connected mac80211: update oper_channel on ibss join
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator由 Linus Torvalds 提交于
This fixes an integration issue with the regulator device tree bindings which shook out in -rc. The bindings were overly enthusiatic when deciding to set a voltage on a regulator and would try to set zero volts on an unconfigured regulator which isn't supported. * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Set apply_uV only when min and max voltages are defined
-
由 Eric Dumazet 提交于
Commit 0884d7aa (AF_UNIX: Fix poll blocking problem when reading from a stream socket) added a regression for epoll() in Edge Triggered mode (EPOLLET) Appropriate fix is to use skb_peek()/skb_unlink() instead of skb_dequeue(), and only call skb_unlink() when skb is fully consumed. This remove the need to requeue a partial skb into sk_receive_queue head and the extra sk->sk_data_ready() calls that added the regression. This is safe because once skb is given to sk_receive_queue, it is not modified by a writer, and readers are serialized by u->readlock mutex. This also reduce number of spinlock acquisition for small reads or MSG_PEEK users so should improve overall performance. Reported-by: NNick Mathewson <nickm@freehaven.net> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: Alexey Moiseytsev <himeraster@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neal Cardwell 提交于
This commit fixes tcp_trim_head() to recalculate the number of segments in the skb with the skb's existing MSS, so trimming the head causes the skb segment count to be monotonically non-increasing - it should stay the same or go down, but not increase. Previously tcp_trim_head() used the current MSS of the connection. But if there was a decrease in MSS between original transmission and ACK (e.g. due to PMTUD), this could cause tcp_trim_head() to counter-intuitively increase the segment count when trimming bytes off the head of an skb. This violated assumptions in tcp_tso_acked() that tcp_trim_head() only decreases the packet count, so that packets_acked in tcp_tso_acked() could underflow, leading tcp_clean_rtx_queue() to pass u32 pkts_acked values as large as 0xffffffff to ca_ops->pkts_acked(). As an aside, if tcp_trim_head() had really wanted the skb to reflect the current MSS, it should have called tcp_set_skb_tso_segs() unconditionally, since a decrease in MSS would mean that a single-packet skb should now be sliced into multiple segments. Signed-off-by: NNeal Cardwell <ncardwell@google.com> Acked-by: NNandita Dukkipati <nanditad@google.com> Acked-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Glauber Costa 提交于
sysctl_tcp_mem() initialization was moved to sysctl_tcp_ipv4.c in commit 3dc43e3e, since it became a per-ns value. That code, however, will never run when CONFIG_SYSCTL is disabled, leading to bogus values on those fields - causing hung TCP sockets. This patch fixes it by keeping an initialization code in tcp_init(). It will be overwritten by the first net namespace init if CONFIG_SYSCTL is compiled in, and do the right thing if it is compiled out. It is also named properly as tcp_init_mem(), to properly signal its non-sysctl side effect on TCP limits. Reported-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NGlauber Costa <glommer@parallels.com> Cc: David S. Miller <davem@davemloft.net> Link: http://lkml.kernel.org/r/4F22D05A.8030604@parallels.com [ renamed the function, tidied up the changelog a bit ] Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: [S390] dasd: revalidate server for new pathgroup [S390] dasd: revert LCU optimization [S390] cleanup entry point definition
-
git://git.monstr.eu/linux-2.6-microblaze由 Linus Torvalds 提交于
* 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: generic atomic64 support
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: vmwgfx: Fix assignment in vmw_framebuffer_create_handle drm/radeon/kms: Fix device tree linkage of i2c buses drm: Pass the real error code back during GEM bo initialisation Revert "drm/i810: cleanup reclaim_buffers"
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
NFS client bugfixes for Linux 3.3 (pull 3) * tag 'nfs-for-3.3-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Fix machine creds in generic_create_cred and generic_match
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Power management fix for 3.3-rc2 Fix for a hibernate (s2disk) regression introduced during the 3.2 merge window that causes s2disk to trigger BUG_ON() in freeze_workqueues_begin() if there is not enough swap space to save the image. * tag 'pm-fix-for-3.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / Hibernate: Fix s2disk regression related to freezing workqueues
-
- 30 1月, 2012 7 次提交
-
-
由 Ryan Mallon 提交于
The assignment of handle in vmw_framebuffer_create_handle doesn't actually do anything useful and is incorrectly assigning an integer value to a pointer argument. It appears that this is a typo and should be dereferencing handle rather than assigning to it directly. This fixes a bug where an undefined handle value is potentially returned to user-space. Signed-off-by: NRyan Mallon <rmallon@gmail.com> Reviewed-by: Jakob Bornecrantz<jakob@vmware.com> Cc: stable@vger.kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jean Delvare 提交于
Properly set the parent device of i2c buses before registering them so that they will show at the right place in the device tree (rather than in /sys/devices directly.) Signed-off-by: NJean Delvare <jdelvare@suse.de> Cc: Dave Airlie <airlied@gmail.com> Reviewed-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Chris Wilson 提交于
In particular, I found I was hitting the max-file limit in the VFS, and the EFILE was being magically transformed into ENOMEM. Confusion reigns. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Daniel Vetter 提交于
This reverts commit 87499ffd. Where is that paper bag ... ah here. I've failed to take an odd interaction between my other cleanups and this reclaim_buffers patch into account and also failed to properly test it. Looks like there are more dragons and hidden trapdoors in the drm release path than actual lines of code. Until I get a clue, let's just revert this. Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Guenter Roeck 提交于
NCT6776F only supports pwm mode for pwm2 and pwm3. Return error if an attempt is made to set those pwm channels to DC mode. Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Acked-by: NJean Delvare <khali@linux-fr.org> Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
由 Rafael J. Wysocki 提交于
Commit 2aede851 PM / Hibernate: Freeze kernel threads after preallocating memory introduced a mechanism by which kernel threads were frozen after the preallocation of hibernate image memory to avoid problems with frozen kernel threads not responding to memory freeing requests. However, it overlooked the s2disk code path in which the SNAPSHOT_CREATE_IMAGE ioctl was run directly after SNAPSHOT_FREE, which caused freeze_workqueues_begin() to BUG(), because it saw that worqueues had been already frozen. Although in principle this issue might be addressed by removing the relevant BUG_ON() from freeze_workqueues_begin(), that would reintroduce the very problem that commit 2aede851 attempted to avoid into that particular code path. For this reason, to fix the issue at hand, introduce thaw_kernel_threads() and make the SNAPSHOT_FREE ioctl execute it. Special thanks to Srivatsa S. Bhat for detailed analysis of the problem. Reported-and-tested-by: NJiri Slaby <jslaby@suse.cz> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: stable@kernel.org
-
由 Vivien Didelot 提交于
When no platform data was supplied, returned error code was 0. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: stable@vger.kernel.org # 2.6.32+ Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
- 29 1月, 2012 3 次提交
-
-
由 Linus Torvalds 提交于
Merge tag 'driver-core-3.3-rc1-bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Here are some patches for the 3.3-rc1 tree. It contains the removal of the sysdev code, now that all users of it are gone, as well as some sysfs bugfixes that have been reported by users. There are also some documentation updates here as well. * tag 'driver-core-3.3-rc1-bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: sysfs: Complain bitterly about attempts to remove files from nonexistent directories. stable: update documentation to ask for kernel version base/core.c:fix typo in comment in function device_add Documentation: devres: add allocation functions to list of supported calls Documentation update for the driver model core kernel-doc: fix new warnings in driver-core kernel-doc: fix new warnings in debugfs kernel-doc: fix new warnings in device.h driver core: remove drivers/base/sys.c and include/linux/sysdev.h
-
git://github.com/rustyrussell/linux由 Linus Torvalds 提交于
* tag 'for-linus' of git://github.com/rustyrussell/linux: lguest: remove reference from Documentation/virtual/00-INDEX virtio: correct the memory barrier in virtqueue_kick_prepare() virtio: fix typos of memory barriers
-
由 Linus Torvalds 提交于
Merge branch 'stable/for-linus-fixes-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/for-linus-fixes-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/granttable: Disable grant v2 for HVM domains. x86: xen: size struct xen_spinlock to always fit in arch_spinlock_t
-