This sets up the short audio descriptors properly on
DCE3.2 asics for hdmi audio.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The table has the following format:

typedef struct _ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT         //usSrcDstTableOffset pointing to this structure
{
  UCHAR               ucNumberOfSrc;
  USHORT              usSrcObjectID[1];
  UCHAR               ucNumberOfDst;
  USHORT              usDstObjectID[1];
}ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT;

usSrcObjectID[] and usDstObjectID[] are variably sized, so we
can't access them directly.  Use pointers and update the offset
appropriately when accessing the Dst members.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Setting MC_MISC_CNTL.GART_INDEX_REG_EN causes hangs on
some boards on resume.  The systems seem to work fine
without touching this bit so leave it as is.

v2: read-modify-write the GART_INDEX_REG_EN bit.
I suspect the problem is that we are losing the other
settings in the register.

fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=52952Reported-by: NOndrej Zary <linux@rainbow-software.org>
Tested-by: NDaniel Tobias <dan.g.tob@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This fills in the GPU specific details for berlin
GPU cores so that the driver will work with them.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

These blocks need to be ungated for the other parts of
the driver properly initialize them (e.g., after a gpu
reset, etc.).
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Track the current uvd gated state on CI to avoid unnecessary
state changes when uvd is active.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

UVD dpm dynamically adjusts the uvd clocks on
demand.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Since we aren't using it when the crtc is disabled, turn it off
to save power.  The GRPH block is the part of the display
controller that controls the primary graphics plane (size,
address, etc.).
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These fixes make writes work properly.  Previously
only reads worked.  Note that this feature is off
by default.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If the LCD table contains an EDID record, properly account
for the edid size when walking through the records.

This should fix error messages about unknown LCD records.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Check the overrides in the firmware info table before
enabling spread spectrum on the engine or memory clocks.

Some boards may have valid spread spectrum tables, but
shouldn't necessarily have it enabled.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We need to allocate line buffer to each display when
setting up the watermarks.  Failure to do so can lead
to a blank screen.  This fixes blank screen problems
on dce8 asics.

Based on an initial fix from:
Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

We need to allocate line buffer to each display when
setting up the watermarks.  Failure to do so can lead
to a blank screen.  This fixes blank screen problems
on dce6 asics.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=64850

Based on an initial fix from:
Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

We need to allocate line buffer to each display when
setting up the watermarks.  Failure to do so can lead
to a blank screen.  This fixes blank screen problems
on dce4.1/5 asics.

Based on an initial fix from:
Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Also add a new RADEON_INFO query to check that CP DMA packets are
supported on the compute ring.

CP DMA has been supported since the 3.8 kernel, but due to an oversight
we forgot to teach the CS checker that the CP DMA packet was legal for
the compute ring on Southern Islands GPUs.

This patch fixes a bug where the radeon driver will incorrectly reject a legal
CP DMA packet from user space.  I would like to have the patch
backported to stable so that we don't have to require Mesa users to use a
bleeding edge kernel in order to take advantage of this feature which
is already present in the stable kernels (3.8 and newer).

v2:
  - Don't bump kms version, so this patch can be backported to stable
    kernels.

Cc: stable@vger.kernel.org
Signed-off-by: NTom Stellard <thomas.stellard@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Now that the CP is no longer reset and cg is properly
disabled in when appropriate in the dpm code we can
now enable mgcg (medium grained clockgating).
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Clockgating needs to be disabled around certain parts
of dpm setup otherwise the smc gets into a bad state
and dpm doesn't work properly.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Clockgating needs to be disabled around certain parts
of dpm setup otherwise the smc gets into a bad state
and dpm doesn't work properly.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The format of the clearstate buffer used for pg (powergating)
changed between NI and SI.  This formats it properly for what
the hardware expects on SI+.

v2: fix addresses
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Clockgating requires signalling between the CP and the
RLC to work properly.  Resetting the CP block in the
CP resume code messed up the internal coordination
between the blocks.  Removing the reset allows gfx
clockgating to work properly.  However, when gfx clock
gating is enabled, there is a strange interaction with
dpm which causes the chip to stay in the high performance
level all the time, so leave gfx clockgating disabled
for now.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

- use new cg/pg flags for finer grained clock and
powergating control
- restructure the cg/pg code so it can be called from
other components such as dpm

v2: fix build breakage from rebase
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable DMA powergating by default.  The DMA engines
will be powergated when not in use.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The format of the clearstate buffer used for pg (powergating)
changed between NI and SI.  This formats it properly for what
the hardware expects on SI.

v2: fix addresses
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Now that the CP is no longer reset and cg is properly
disabled in when appropriate in the dpm code we can
now enable mgcg (medium grained clockgating).
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Clockgating needs to be disabled around certain parts
of dpm setup otherwise the smc gets into a bad state
and dpm doesn't work properly.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Clockgating requires signalling between the CP and the
RLC to work properly.  Resetting the CP block in the
CP resume code messed up the internal coordination
between the blocks.  Removing the reset allows gfx
clockgating to work properly.  However, when gfx clock
gating is enabled, there is a strange interaction with
dpm which causes the chip to stay in the high performance
level all the time, so leave gfx clockgating disabled
for now.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Resturcture clockgating code so that it can be
enabled/disabled from other components such as
dpm.

v2: make function static
v3: add fine grained cg controls
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allows us finer grained control over clock and
powergating on SI.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This commits adds flags for supported clockgating and
powergating features.  This allows us to more easily
track which features are supported on a particular
asic and to enable/disable features for debugging.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This updates the audio driver to the speaker allocation
block from the EDID.  A similar change was just implemented
for DCE4-8.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This updates the audio driver to the speaker allocation
block from the EDID.  A similar change was just implemented
for DCE6/8.

v2: remove unused variables
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NRafał Miłecki <zajec5@gmail.com>

Do it before enabling audio channels (in AFMT_AUDIO_PACKET_CONTROL2
register).
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Similar to DCE4/5, but supports multiple audio pins
which can be assigned per afmt block.

v2: rework the driver to handle more than one audio
pin.
v3: try different dto reg
v4: properly program dto
v5 (ck): change dto programming order
v6: program speaker allocation block
v7: rebase
v8: rebase on Rafał's changes
v9: integrated Rafał's comments, update to latest
    drm_edid_to_speaker_allocation API
v10: add missing line break in error message
v11: add back audio enabled messages
v12: fix copy paste typo in r600_audio_enable
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NRafał Miłecki <zajec5@gmail.com>

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Similar to separating the UVD code, just put the DMA
functions into separate files.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Our different hardware blocks are actually completely
separated, so it doesn't make much sense any more to
structure the code by pure chipset generations.

Start restructuring the code by separating our the UVD block.

v2: updated commit message
v3: rebased and restructurized start/stop functions for kv dpm.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Now that we have callbacks for [rw]ptr handling we can
remove the special handling for the DMA rings and use
the callbacks instead.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The hardware just doesn't support this correctly.
Disable it before we accidentally write anywhere we shouldn't.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Give the ring functions a separate structure and let the asic
structure point to the ring specific functions. This simplifies
the code and allows us to make changes at only one point.

No change in functionality.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Need to swap the data fetched over i2c properly.  This
is the same fix as the endian fix for aux channel
transactions.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org