- 09 2月, 2014 1 次提交
-
-
由 Dave Kleikamp 提交于
I missed a couple errors in reviewing the patches converting jfs to use the generic posix ACL function. Setting ACL's currently fails with -EOPNOTSUPP. Signed-off-by: NDave Kleikamp <dave.kleikamp@oracle.com> Reported-by: NMichael L. Semon <mlsemon35@gmail.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
- 08 2月, 2014 12 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client由 Linus Torvalds 提交于
Pull ceph fixes from Sage Weil: "There is an RBD fix for a crash due to the immutable bio changes, an error path fix, and a locking fix in the recent redirect support" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: libceph: do not dereference a NULL bio pointer libceph: take map_sem for read in handle_reply() libceph: factor out logic from ceph_osdc_start_request() libceph: fix error handling in ceph_osdc_init()
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Catalin Marinas: - Relax VDSO alignment requirements so that the kernel-picked one (4K) does not conflict with the dynamic linker's one (64K) - VDSO gettimeofday fix - Barrier fixes for atomic operations and cache flushing - TLB invalidation when overriding early page mappings during boot - Wired up new 32-bit arm (compat) syscalls - LSM_MMAP_MIN_ADDR when COMPAT is enabled - defconfig update - Clean-up (comments, pgd_alloc). * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: defconfig: Expand default enabled features arm64: asm: remove redundant "cc" clobbers arm64: atomics: fix use of acquire + release for full barrier semantics arm64: barriers: allow dsb macro to take option parameter security: select correct default LSM_MMAP_MIN_ADDR on arm on arm64 arm64: compat: Wire up new AArch32 syscalls arm64: vdso: update wtm fields for CLOCK_MONOTONIC_COARSE arm64: vdso: fix coarse clock handling arm64: simplify pgd_alloc arm64: fix typo: s/SERRROR/SERROR/ arm64: Invalidate the TLB when replacing pmd entries during boot arm64: Align CMA sizes to PAGE_SIZE arm64: add DSB after icache flush in __flush_icache_all() arm64: vdso: prevent ld from aligning PT_LOAD segments to 64k
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS updates from Ralf Baechle: "hree minor patches. All have sat in -next for a few days" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: fpu.h: Fix build when CONFIG_BUG is not set MIPS: Wire up sched_setattr/sched_getattr syscalls MIPS: Alchemy: Fix DB1100 GPIO registration
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull media fixes from Mauro Carvalho Chehab: "A series of small fixes. Mostly driver ones. There is one core regression fix on a patch that was meant to fix some race issues on vb2, but that actually caused more harm than good. So, we're just reverting it for now" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] adv7842: Composite free-run platfrom-data fix [media] v4l2-dv-timings: fix GTF calculation [media] hdpvr: Fix memory leak in debug [media] af9035: add ID [2040:f900] Hauppauge WinTV-MiniStick 2 [media] mxl111sf: Fix compile when CONFIG_DVB_USB_MXL111SF is unset [media] mxl111sf: Fix unintentional garbage stack read [media] cx24117: use a valid dev pointer for dev_err printout [media] cx24117: remove dead code in always 'false' if statement [media] update Michael Krufky's email address [media] vb2: Check if there are buffers before streamon [media] Revert "[media] videobuf_vm_{open,close} race fixes" [media] go7007-loader: fix usb_dev leak [media] media: bt8xx: add missing put_device call [media] exynos4-is: Compile in fimc-lite runtime PM callbacks conditionally [media] exynos4-is: Compile in fimc runtime PM callbacks conditionally [media] exynos4-is: Fix error paths in probe() for !pm_runtime_enabled() [media] s5p-jpeg: Fix wrong NV12 format parameters [media] s5k5baf: allow to handle arbitrary long i2c sequences
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging由 Linus Torvalds 提交于
Pull hwmon fixes from Guenter Roeck: "Fix PMBus driver problem with some multi-page voltage sensors and fix da9055 interrupt initialization" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (da9055) Remove use of regmap_irq_get_virq() hwmon: (pmbus) Support per-page exponent in linear mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI and power management fixes from Rafael Wysocki: "These include a fix for a recent ACPI hotplug regression, four concurrency related fixes and one PCI device removal fix for ACPI-based PCI hotplug (ACPIPHP), intel_pstate fix that should go into stable, three simple ACPI cleanups and a new entry for the ACPI video blacklist. Specifics: - Fix for a recent ACPI hotplug regression causing a NULL pointer dereference to occur while handling ACPI eject notifications for already ejected devices. From Toshi Kani. - Four concurrency-related fixes for ACPIPHP. Two of them add missing locking and the other two fix race conditions related to reference counting. - ACPIPHP fix to avoid NULL pointer dereferences during device removal involving Virtual Funcions. - intel_pstate fix to make it compute the percentage of time the CPU is busy properly. From Dirk Brandewie. - Removal of two unnecessary NULL pointer checks in ACPI code and a fix for sscanf() format string from Dan Carpenter and Luis G.F. - New ACPI video blacklist entry for HP EliteBook Revolve 810 from Mika Westerberg" * tag 'pm+acpi-3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / hotplug: Fix panic on eject to ejected device ACPI / battery: Fix incorrect sscanf() string in acpi_battery_init_alarm() ACPI / proc: remove unneeded NULL check ACPI / utils: remove a pointless NULL check ACPI / video: Add HP EliteBook Revolve 810 to the blacklist intel_pstate: Take core C0 time into account for core busy calculation ACPI / hotplug / PCI: Fix bridge removal race vs dock events ACPI / hotplug / PCI: Fix bridge removal race in handle_hotplug_event() ACPI / hotplug / PCI: Scan root bus under the PCI rescan-remove lock ACPI / hotplug / PCI: Move PCI rescan-remove locking to hotplug_event() ACPI / hotplug / PCI: Remove entries from bus->devices in reverse order
-
由 Ilya Dryomov 提交于
Commit f38a5181 ("ceph: Convert to immutable biovecs") introduced a NULL pointer dereference, which broke rbd in -rc1. Fix it. Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: NSage Weil <sage@inktank.com>
-
由 Ilya Dryomov 提交于
Handling redirect replies requires both map_sem and request_mutex. Taking map_sem unconditionally near the top of handle_reply() avoids possible race conditions that arise from releasing request_mutex to be able to acquire map_sem in redirect reply case. (Lock ordering is: map_sem, request_mutex, crush_mutex.) Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: NSage Weil <sage@inktank.com>
-
由 Ilya Dryomov 提交于
Factor out logic from ceph_osdc_start_request() into a new helper, __ceph_osdc_start_request(). ceph_osdc_start_request() now amounts to taking locks and calling __ceph_osdc_start_request(). Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: NSage Weil <sage@inktank.com>
-
由 Mark Rutland 提交于
FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Will Deacon 提交于
cbnz/tbnz don't update the condition flags, so remove the "cc" clobbers from inline asm blocks that only use these instructions to implement conditional branches. Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Will Deacon 提交于
Linux requires a number of atomic operations to provide full barrier semantics, that is no memory accesses after the operation can be observed before any accesses up to and including the operation in program order. On arm64, these operations have been incorrectly implemented as follows: // A, B, C are independent memory locations <Access [A]> // atomic_op (B) 1: ldaxr x0, [B] // Exclusive load with acquire <op(B)> stlxr w1, x0, [B] // Exclusive store with release cbnz w1, 1b <Access [C]> The assumption here being that two half barriers are equivalent to a full barrier, so the only permitted ordering would be A -> B -> C (where B is the atomic operation involving both a load and a store). Unfortunately, this is not the case by the letter of the architecture and, in fact, the accesses to A and C are permitted to pass their nearest half barrier resulting in orderings such as Bl -> A -> C -> Bs or Bl -> C -> A -> Bs (where Bl is the load-acquire on B and Bs is the store-release on B). This is a clear violation of the full barrier requirement. The simple way to fix this is to implement the same algorithm as ARMv7 using explicit barriers: <Access [A]> // atomic_op (B) dmb ish // Full barrier 1: ldxr x0, [B] // Exclusive load <op(B)> stxr w1, x0, [B] // Exclusive store cbnz w1, 1b dmb ish // Full barrier <Access [C]> but this has the undesirable effect of introducing *two* full barrier instructions. A better approach is actually the following, non-intuitive sequence: <Access [A]> // atomic_op (B) 1: ldxr x0, [B] // Exclusive load <op(B)> stlxr w1, x0, [B] // Exclusive store with release cbnz w1, 1b dmb ish // Full barrier <Access [C]> The simple observations here are: - The dmb ensures that no subsequent accesses (e.g. the access to C) can enter or pass the atomic sequence. - The dmb also ensures that no prior accesses (e.g. the access to A) can pass the atomic sequence. - Therefore, no prior access can pass a subsequent access, or vice-versa (i.e. A is strictly ordered before C). - The stlxr ensures that no prior access can pass the store component of the atomic operation. The only tricky part remaining is the ordering between the ldxr and the access to A, since the absence of the first dmb means that we're now permitting re-ordering between the ldxr and any prior accesses. From an (arbitrary) observer's point of view, there are two scenarios: 1. We have observed the ldxr. This means that if we perform a store to [B], the ldxr will still return older data. If we can observe the ldxr, then we can potentially observe the permitted re-ordering with the access to A, which is clearly an issue when compared to the dmb variant of the code. Thankfully, the exclusive monitor will save us here since it will be cleared as a result of the store and the ldxr will retry. Notice that any use of a later memory observation to imply observation of the ldxr will also imply observation of the access to A, since the stlxr/dmb ensure strict ordering. 2. We have not observed the ldxr. This means we can perform a store and influence the later ldxr. However, that doesn't actually tell us anything about the access to [A], so we've not lost anything here either when compared to the dmb variant. This patch implements this solution for our barriered atomic operations, ensuring that we satisfy the full barrier requirements where they are needed. Cc: <stable@vger.kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 07 2月, 2014 15 次提交
-
-
由 Adam Thomson 提交于
Remove use of regmap_irq_get_virq() in driver probe which was conflicting with use of platform_get_irq_byname(). platform_get_irq_byname() already returns the VIRQ number due to MFD core translation so using regmap_irq_get_virq() on that returned value results in an incorrect IRQ being requested. The driver probes then fail because of this. Signed-off-by: NAdam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Rafael J. Wysocki 提交于
* acpi-cleanup: ACPI / battery: Fix incorrect sscanf() string in acpi_battery_init_alarm() ACPI / proc: remove unneeded NULL check ACPI / utils: remove a pointless NULL check * acpi-video: ACPI / video: Add HP EliteBook Revolve 810 to the blacklist
-
由 Rafael J. Wysocki 提交于
* pm-cpufreq: intel_pstate: Take core C0 time into account for core busy calculation
-
由 Rafael J. Wysocki 提交于
* acpi-pci-hotplug: ACPI / hotplug / PCI: Fix bridge removal race vs dock events ACPI / hotplug / PCI: Fix bridge removal race in handle_hotplug_event() ACPI / hotplug / PCI: Scan root bus under the PCI rescan-remove lock ACPI / hotplug / PCI: Move PCI rescan-remove locking to hotplug_event() ACPI / hotplug / PCI: Remove entries from bus->devices in reverse order * acpi-hotplug: ACPI / hotplug: Fix panic on eject to ejected device
-
由 Linus Torvalds 提交于
Merge a bunch of fixes from Andrew Morton: "Commit 579f8290 ("swap: add a simple detector for inappropriate swapin readahead") is a feature. No probs if you decide to defer it until the next merge window. It has been sitting in my tree for over a year because of my dislike of all the magic numbers, but recent discussion with Hugh has made me give up" * emailed patches fron Andrew Morton <akpm@linux-foundation.org>: mm: __set_page_dirty uses spin_lock_irqsave instead of spin_lock_irq arch/x86/mm/numa.c: fix array index overflow when synchronizing nid to memblock.reserved. arch/x86/mm/numa.c: initialize numa_kernel_nodes in numa_clear_kernel_node_hotplug() mm: __set_page_dirty_nobuffers() uses spin_lock_irqsave() instead of spin_lock_irq() mm/swap: fix race on swap_info reuse between swapoff and swapon swap: add a simple detector for inappropriate swapin readahead ocfs2: free allocated clusters if error occurs after ocfs2_claim_clusters Documentation/kernel-parameters.txt: fix memmap= language
-
由 KOSAKI Motohiro 提交于
To use spin_{un}lock_irq is dangerous if caller disabled interrupt. During aio buffer migration, we have a possibility to see the following call stack. aio_migratepage [disable interrupt] migrate_page_copy clear_page_dirty_for_io set_page_dirty __set_page_dirty_buffers __set_page_dirty spin_lock_irq This mean, current aio migration is a deadlockable. spin_lock_irqsave is a safer alternative and we should use it. Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reported-by: David Rientjes rientjes@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tang Chen 提交于
The following path will cause array out of bound. memblock_add_region() will always set nid in memblock.reserved to MAX_NUMNODES. In numa_register_memblks(), after we set all nid to correct valus in memblock.reserved, we called setup_node_data(), and used memblock_alloc_nid() to allocate memory, with nid set to MAX_NUMNODES. The nodemask_t type can be seen as a bit array. And the index is 0 ~ MAX_NUMNODES-1. After that, when we call node_set() in numa_clear_kernel_node_hotplug(), the nodemask_t got an index of value MAX_NUMNODES, which is out of [0 ~ MAX_NUMNODES-1]. See below: numa_init() |---> numa_register_memblks() | |---> memblock_set_node(memory) set correct nid in memblock.memory | |---> memblock_set_node(reserved) set correct nid in memblock.reserved | |...... | |---> setup_node_data() | |---> memblock_alloc_nid() here, nid is set to MAX_NUMNODES (1024) |...... |---> numa_clear_kernel_node_hotplug() |---> node_set() here, we have an index 1024, and overflowed This patch moves nid setting to numa_clear_kernel_node_hotplug() to fix this problem. Reported-by: NDave Jones <davej@redhat.com> Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Tested-by: NGu Zheng <guz.fnst@cn.fujitsu.com> Reported-by: NDave Jones <davej@redhat.com> Cc: David Rientjes <rientjes@google.com> Tested-by: NDave Jones <davej@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tang Chen 提交于
On-stack variable numa_kernel_nodes in numa_clear_kernel_node_hotplug() was not initialized. So we need to initialize it. [akpm@linux-foundation.org: use NODE_MASK_NONE, per David] Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Tested-by: NGu Zheng <guz.fnst@cn.fujitsu.com> Reported-by: NDave Jones <davej@redhat.com> Reported-by: NDavid Rientjes <rientjes@google.com> Tested-by: NDave Jones <davej@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 KOSAKI Motohiro 提交于
During aio stress test, we observed the following lockdep warning. This mean AIO+numa_balancing is currently deadlockable. The problem is, aio_migratepage disable interrupt, but __set_page_dirty_nobuffers unintentionally enable it again. Generally, all helper function should use spin_lock_irqsave() instead of spin_lock_irq() because they don't know caller at all. other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&ctx->completion_lock)->rlock); <Interrupt> lock(&(&ctx->completion_lock)->rlock); *** DEADLOCK *** dump_stack+0x19/0x1b print_usage_bug+0x1f7/0x208 mark_lock+0x21d/0x2a0 mark_held_locks+0xb9/0x140 trace_hardirqs_on_caller+0x105/0x1d0 trace_hardirqs_on+0xd/0x10 _raw_spin_unlock_irq+0x2c/0x50 __set_page_dirty_nobuffers+0x8c/0xf0 migrate_page_copy+0x434/0x540 aio_migratepage+0xb1/0x140 move_to_new_page+0x7d/0x230 migrate_pages+0x5e5/0x700 migrate_misplaced_page+0xbc/0xf0 do_numa_page+0x102/0x190 handle_pte_fault+0x241/0x970 handle_mm_fault+0x265/0x370 __do_page_fault+0x172/0x5a0 do_page_fault+0x1a/0x70 page_fault+0x28/0x30 Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <jweiner@redhat.com> Acked-by: NDavid Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Weijie Yang 提交于
swapoff clear swap_info's SWP_USED flag prematurely and free its resources after that. A concurrent swapon will reuse this swap_info while its previous resources are not cleared completely. These late freed resources are: - p->percpu_cluster - swap_cgroup_ctrl[type] - block_device setting - inode->i_flags &= ~S_SWAPFILE This patch clears the SWP_USED flag after all its resources are freed, so that swapon can reuse this swap_info by alloc_swap_info() safely. [akpm@linux-foundation.org: tidy up code comment] Signed-off-by: NWeijie Yang <weijie.yang@samsung.com> Acked-by: NHugh Dickins <hughd@google.com> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Shaohua Li 提交于
This is a patch to improve swap readahead algorithm. It's from Hugh and I slightly changed it. Hugh's original changelog: swapin readahead does a blind readahead, whether or not the swapin is sequential. This may be ok on harddisk, because large reads have relatively small costs, and if the readahead pages are unneeded they can be reclaimed easily - though, what if their allocation forced reclaim of useful pages? But on SSD devices large reads are more expensive than small ones: if the readahead pages are unneeded, reading them in caused significant overhead. This patch adds very simplistic random read detection. Stealing the PageReadahead technique from Konstantin Khlebnikov's patch, avoiding the vma/anon_vma sophistications of Shaohua Li's patch, swapin_nr_pages() simply looks at readahead's current success rate, and narrows or widens its readahead window accordingly. There is little science to its heuristic: it's about as stupid as can be whilst remaining effective. The table below shows elapsed times (in centiseconds) when running a single repetitive swapping load across a 1000MB mapping in 900MB ram with 1GB swap (the harddisk tests had taken painfully too long when I used mem=500M, but SSD shows similar results for that). Vanilla is the 3.6-rc7 kernel on which I started; Shaohua denotes his Sep 3 patch in mmotm and linux-next; HughOld denotes my Oct 1 patch which Shaohua showed to be defective; HughNew this Nov 14 patch, with page_cluster as usual at default of 3 (8-page reads); HughPC4 this same patch with page_cluster 4 (16-page reads); HughPC0 with page_cluster 0 (1-page reads: no readahead). HDD for swapping to harddisk, SSD for swapping to VertexII SSD. Seq for sequential access to the mapping, cycling five times around; Rand for the same number of random touches. Anon for a MAP_PRIVATE anon mapping; Shmem for a MAP_SHARED anon mapping, equivalent to tmpfs. One weakness of Shaohua's vma/anon_vma approach was that it did not optimize Shmem: seen below. Konstantin's approach was perhaps mistuned, 50% slower on Seq: did not compete and is not shown below. HDD Vanilla Shaohua HughOld HughNew HughPC4 HughPC0 Seq Anon 73921 76210 75611 76904 78191 121542 Seq Shmem 73601 73176 73855 72947 74543 118322 Rand Anon 895392 831243 871569 845197 846496 841680 Rand Shmem 1058375 1053486 827935 764955 764376 756489 SSD Vanilla Shaohua HughOld HughNew HughPC4 HughPC0 Seq Anon 24634 24198 24673 25107 21614 70018 Seq Shmem 24959 24932 25052 25703 22030 69678 Rand Anon 43014 26146 28075 25989 26935 25901 Rand Shmem 45349 45215 28249 24268 24138 24332 These tests are, of course, two extremes of a very simple case: under heavier mixed loads I've not yet observed any consistent improvement or degradation, and wider testing would be welcome. Shaohua Li: Test shows Vanilla is slightly better in sequential workload than Hugh's patch. I observed with Hugh's patch sometimes the readahead size is shrinked too fast (from 8 to 1 immediately) in sequential workload if there is no hit. And in such case, continuing doing readahead is good actually. I don't prepare a sophisticated algorithm for the sequential workload because so far we can't guarantee sequential accessed pages are swap out sequentially. So I slightly change Hugh's heuristic - don't shrink readahead size too fast. Here is my test result (unit second, 3 runs average): Vanilla Hugh New Seq 356 370 360 Random 4525 2447 2444 Attached graph is the swapin/swapout throughput I collected with 'vmstat 2'. The first part is running a random workload (till around 1200 of the x-axis) and the second part is running a sequential workload. swapin and swapout throughput are almost identical in steady state in both workloads. These are expected behavior. while in Vanilla, swapin is much bigger than swapout especially in random workload (because wrong readahead). Original patches by: Shaohua Li and Konstantin Khlebnikov. [fengguang.wu@intel.com: swapin_nr_pages() can be static] Signed-off-by: NHugh Dickins <hughd@google.com> Signed-off-by: NShaohua Li <shli@fusionio.com> Signed-off-by: NFengguang Wu <fengguang.wu@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zongxun Wang 提交于
Even if using the same jbd2 handle, we cannot rollback a transaction. So once some error occurs after successfully allocating clusters, the allocated clusters will never be used and it means they are lost. For example, call ocfs2_claim_clusters successfully when expanding a file, but failed in ocfs2_insert_extent. So we need free the allocated clusters if they are not used indeed. Signed-off-by: NZongxun Wang <wangzongxun@huawei.com> Signed-off-by: NJoseph Qi <joseph.qi@huawei.com> Acked-by: NJoel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Li Zefan <lizefan@huawei.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Clean up descriptions of memmap= boot options. Add periods (full stops), drop commas, change "used" to "reserved" or "marked". Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Cc: Andiry Xu <andiry.xu@gmail.com> Acked-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "A few HD-audio fixes and one USB-audio kconfig dependency fix. All small and device-specific changes marked with Cc to stable" * tag 'sound-3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Improve loopback path lookups for AD1983 ALSA: hda - Fix missing VREF setup for Mac Pro 1,1 ALSA: hda - Add missing mixer widget for AD1983 ALSA: hda/realtek - Avoid invalid COEFs for ALC271X ALSA: hda - Fix silent output on Toshiba Satellite L40 ALSA: usb-audio: Add missing kconfig dependecy
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "A few regression fixes already, one for my own stupidity, and mgag200 typo fix, vmwgfx fixes and ttm regression fixes, and a radeon register checker update for older cards to handle geom shaders" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: allow geom rings to be setup on r600/r700 (v2) drm/mgag200,ast,cirrus: fix regression with drm_can_sleep conversion drm/ttm: Don't clear page metadata of imported sg pages drm/ttm: Fix TTM object open regression vmwgfx: Fix unitialized stack read in vmw_setup_otable_base drm/vmwgfx: Reemit context bindings when necessary v2 drm/vmwgfx: Detect old user-space drivers and set up legacy emulation v2 drm/vmwgfx: Emulate legacy shaders on guest-backed devices v2 drm/vmwgfx: Fix legacy surface reference size copyback drm/vmwgfx: Fix SET_SHADER_CONST emulation on guest-backed devices drm/vmwgfx: Fix regression caused by "drm/ttm: make ttm reservation calls behave like reservation calls" drm/vmwgfx: Don't commit staged bindings if execbuf fails drm/mgag200: fix typo causing bw limits to be ignored on some chips
-
- 06 2月, 2014 12 次提交
-
-
由 Aaro Koskinen 提交于
__enable_fpu produces a build failure when CONFIG_BUG is not set: In file included from arch/mips/kernel/cpu-probe.c:24:0: arch/mips/include/asm/fpu.h: In function '__enable_fpu': arch/mips/include/asm/fpu.h:77:1: error: control reaches end of non-void function [-Werror=return-type] This is regression introduced in 3.14-rc1. Fix that. Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi> Acked-by: NPaul Burton <paul.burton@imgtec.com> Cc: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6504/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Will Deacon 提交于
The dsb instruction takes an option specifying both the target access types and shareability domain. This patch allows such an option to be passed to the dsb macro, resulting in potentially more efficient code. Currently the option is ignored until all callers are updated (unlike ARM, the option is mandated by the assembler). Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Dave Airlie 提交于
the evergreen CS parser has allowed this for a while, just port the code to the r600 one. This is required before geom shaders can be made work. v2: agd5f: minor cleanup and add additional 7xx reg. Signed-off-by: NDave Airlie <airlied@redhat.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Merge tag 'vmwgfx-fixes-3.14-2014-02-05' of git://people.freedesktop.org/~thomash/linux into drm-next A couple of vmwgfx fixes together with missing bits of legacy device emulation to facilitate old user-space drivers on new devices. The shader emulation bits are a bit large, but since they mostly touch the new device code, regressions are unlikely. I figure the gain of having this from the start clearly outweighs the risc of adding these bits at this point. Pull request of 2014-02-05 * tag 'vmwgfx-fixes-3.14-2014-02-05' of git://people.freedesktop.org/~thomash/linux: vmwgfx: Fix unitialized stack read in vmw_setup_otable_base drm/vmwgfx: Reemit context bindings when necessary v2 drm/vmwgfx: Detect old user-space drivers and set up legacy emulation v2 drm/vmwgfx: Emulate legacy shaders on guest-backed devices v2 drm/vmwgfx: Fix legacy surface reference size copyback drm/vmwgfx: Fix SET_SHADER_CONST emulation on guest-backed devices drm/vmwgfx: Fix regression caused by "drm/ttm: make ttm reservation calls behave like reservation calls" drm/vmwgfx: Don't commit staged bindings if execbuf fails
-
git://people.freedesktop.org/~thomash/linux由 Dave Airlie 提交于
Two ttm regression fixes. Pull request of 2014-02-05 * tag 'ttm-fixes-3.14-2014-02-05' of git://people.freedesktop.org/~thomash/linux: drm/ttm: Don't clear page metadata of imported sg pages drm/ttm: Fix TTM object open regression
-
由 Dave Airlie 提交于
I totally sign inverted my way out of this one. Cc: stable@vger.kernel.org Reported-by: N"Sabrina Dubroca" <sd@queasysnail.net> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq updates from Thomas Gleixner: "This lot provides: * Bugfixes for armada irq controller * Updates to renesas irq chip * Support for the TI-NSPIRE irq controller Not strictly a bug fix only pull request, but important updates for some of the arm Socs which I completely forgot to send last week. Seems like my obliviousness is getting worse, I just can't remember when it started" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: Add support for TI-NSPIRE irqchip irqchip: renesas-irqc: Enable mask on suspend irqchip: renesas-irqc: Use lazy disable irqchip: armada-370-xp: fix MSI race condition irqchip: armada-370-xp: fix IPI race condition
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip由 Linus Torvalds 提交于
Pull Xen fixes from Konrad Rzeszutek Wilk: "Bug-fixes: - Revert "xen/grant-table: Avoid m2p_override during mapping" as it broke Xen ARM build. - Fix CR4 not being set on AP processors in Xen PVH mode" * tag 'stable/for-linus-3.14-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pvh: set CR4 flags for APs Revert "xen/grant-table: Avoid m2p_override during mapping"
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux由 Linus Torvalds 提交于
Pull ia64 update from Tony Luck: "Wire up new sched_setattr and sched_getattr syscalls" * tag 'please-pull-ia64-syscalls' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] Wire up new sched_setattr and sched_getattr syscalls
-
git://git.infradead.org/users/willy/linux-nvme由 Linus Torvalds 提交于
Pull NVMe driver update from Matthew Wilcox: "Looks like I missed the merge window ... but these are almost all bugfixes anyway (the ones that aren't have been baking for months)" * git://git.infradead.org/users/willy/linux-nvme: NVMe: Namespace use after free on surprise removal NVMe: Correct uses of INIT_WORK NVMe: Include device and queue numbers in interrupt name NVMe: Add a pci_driver shutdown method NVMe: Disable admin queue on init failure NVMe: Dynamically allocate partition numbers NVMe: Async IO queue deletion NVMe: Surprise removal handling NVMe: Abort timed out commands NVMe: Schedule reset for failed controllers NVMe: Device resume error handling NVMe: Cache dev->pci_dev in a local pointer NVMe: Fix lockdep warnings NVMe: compat SG_IO ioctl NVMe: remove deprecated IRQF_DISABLED NVMe: Avoid shift operation when writing cq head doorbell
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator由 Linus Torvalds 提交于
Pull regulator fixes from Mark Brown: "A couple of driver fixes here but the main thing is a fix to the checks for deferred probe non-DT systems with fully specified regulators which had been broken by a device tree fix which meant that we wouldn't insert optional regulators. This had slipped through the cracks since very few systems do that in the first place and those that do it in mainline don't need optional regulators anyway" * tag 'regulator-v3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: s2mps11: Fix NULL pointer of_node value when using platform data regulator: core: Correct default return value for full constraints regulator: ab3100: cast fix
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fixes from Herbert Xu: "This fixes a number of concurrency issues on s390 where multiple users of the same crypto transform may clobber each other's results" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: s390 - fix des and des3_ede ctr concurrency issue crypto: s390 - fix des and des3_ede cbc concurrency issue crypto: s390 - fix concurrency issue in aes-ctr mode
-