- 25 11月, 2013 1 次提交
-
-
由 Kent Overstreet 提交于
It was being open coded in a few places. Signed-off-by: NKent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Neil Brown <neilb@suse.de> Cc: Chris Mason <chris.mason@fusionio.com> Acked-by: NNeilBrown <neilb@suse.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 21 11月, 2013 5 次提交
-
-
由 Hong Zhiguo 提交于
While u64_stats_fetch_retry is only preempt_disable on 32bit UP system. This is not enough to avoid preemption by bh and may read strange 64 bit value. Signed-off-by: NHong Zhiguo <zhiguohong@tencent.com> Acked-by: NTejun Heo <tj@kernel.org> Cc: stable@kernel.org Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull more ACPI and power management updates from Rafael Wysocki: - ACPI-based device hotplug fixes for issues introduced recently and a fix for an older error code path bug in the ACPI PCI host bridge driver - Fix for recently broken OMAP cpufreq build from Viresh Kumar - Fix for a recent hibernation regression related to s2disk - Fix for a locking-related regression in the ACPI EC driver from Puneet Kumar - System suspend error code path fix related to runtime PM and runtime PM documentation update from Ulf Hansson - cpufreq's conservative governor fix from Xiaoguang Chen - New processor IDs for intel_idle and turbostat and removal of an obsolete Kconfig option from Len Brown - New device IDs for the ACPI LPSS (Low-Power Subsystem) driver and ACPI-based PCI hotplug (ACPIPHP) cleanup from Mika Westerberg - Removal of several ACPI video DMI blacklist entries that are not necessary any more from Aaron Lu - Rework of the ACPI companion representation in struct device and code cleanup related to that change from Rafael J Wysocki, Lan Tianyu and Jarkko Nikula - Fixes for assigning names to ACPI-enumerated I2C and SPI devices from Jarkko Nikula * tag 'pm+acpi-2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits) PCI / hotplug / ACPI: Drop unused acpiphp_debug declaration ACPI / scan: Set flags.match_driver in acpi_bus_scan_fixed() ACPI / PCI root: Clear driver_data before failing enumeration ACPI / hotplug: Fix PCI host bridge hot removal ACPI / hotplug: Fix acpi_bus_get_device() return value check cpufreq: governor: Remove fossil comment in the cpufreq_governor_dbs() ACPI / video: clean up DMI table for initial black screen problem ACPI / EC: Ensure lock is acquired before accessing ec struct members PM / Hibernate: Do not crash kernel in free_basic_memory_bitmaps() ACPI / AC: Remove struct acpi_device pointer from struct acpi_ac spi: Use stable dev_name for ACPI enumerated SPI slaves i2c: Use stable dev_name for ACPI enumerated I2C slaves ACPI: Provide acpi_dev_name accessor for struct acpi_device device name ACPI / bind: Use (put|get)_device() on ACPI device objects too ACPI: Eliminate the DEVICE_ACPI_HANDLE() macro ACPI / driver core: Store an ACPI device pointer in struct acpi_dev_node cpufreq: OMAP: Fix compilation error 'r & ret undeclared' PM / Runtime: Fix error path for prepare PM / Runtime: Update documentation around probe|remove|suspend cpufreq: conservative: set requested_freq to policy max when it is over policy max ...
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull slave-dmaengine changes from Vinod Koul: "This brings for slave dmaengine: - Change dma notification flag to DMA_COMPLETE from DMA_SUCCESS as dmaengine can only transfer and not verify validaty of dma transfers - Bunch of fixes across drivers: - cppi41 driver fixes from Daniel - 8 channel freescale dma engine support and updated bindings from Hongbo - msx-dma fixes and cleanup by Markus - DMAengine updates from Dan: - Bartlomiej and Dan finalized a rework of the dma address unmap implementation. - In the course of testing 1/ a collection of enhancements to dmatest fell out. Notably basic performance statistics, and fixed / enhanced test control through new module parameters 'run', 'wait', 'noverify', and 'verbose'. Thanks to Andriy and Linus [Walleij] for their review. - Testing the raid related corner cases of 1/ triggered bugs in the recently added 16-source operation support in the ioatdma driver. - Some minor fixes / cleanups to mv_xor and ioatdma" * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (99 commits) dma: mv_xor: Fix mis-usage of mmio 'base' and 'high_base' registers dma: mv_xor: Remove unneeded NULL address check ioat: fix ioat3_irq_reinit ioat: kill msix_single_vector support raid6test: add new corner case for ioatdma driver ioatdma: clean up sed pool kmem_cache ioatdma: fix selection of 16 vs 8 source path ioatdma: fix sed pool selection ioatdma: Fix bug in selftest after removal of DMA_MEMSET. dmatest: verbose mode dmatest: convert to dmaengine_unmap_data dmatest: add a 'wait' parameter dmatest: add basic performance metrics dmatest: add support for skipping verification and random data setup dmatest: use pseudo random numbers dmatest: support xor-only, or pq-only channels in tests dmatest: restore ability to start test at module load and init dmatest: cleanup redundant "dmatest: " prefixes dmatest: replace stored results mechanism, with uniform messages Revert "dmatest: append verify result to results" ...
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block IO fixes from Jens Axboe: "Normally I'd defer my initial for-linus pull request until after the merge window, but a race was uncovered in the virtio-blk conversion to blk-mq that could cause hangs. So here's a small collection of fixes for you to pull: - The fix for the virtio-blk IO hang reported by Dave Chinner, from Shaohua and myself. - Add the Insert blktrace event for blk-mq. This makes 'btt' happy when it is doing it's state transition analysis. - Ensure that blk-mq has disk/partition stats enabled by default, instead of making it opt-in. - A fix for __bio_add_page() and large sector counts" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq: add blktrace insert event trace virtio-blk: virtqueue_kick() must be ordered with other virtqueue operations blk-mq: ensure that we set REQ_IO_STAT so diskstats work bio: fix argument of __bio_add_page() for max_sectors > 0xffff
-
git://neil.brown.name/md由 Linus Torvalds 提交于
Pull md update from Neil Brown: "Mostly optimisations and obscure bug fixes. - raid5 gets less lock contention - raid1 gets less contention between normal-io and resync-io during resync" * tag 'md/3.13' of git://neil.brown.name/md: md/raid5: Use conf->device_lock protect changing of multi-thread resources. md/raid5: Before freeing old multi-thread worker, it should flush them. md/raid5: For stripe with R5_ReadNoMerge, we replace REQ_FLUSH with REQ_NOMERGE. UAPI: include <asm/byteorder.h> in linux/raid/md_p.h raid1: Rewrite the implementation of iobarrier. raid1: Add some macros to make code clearly. raid1: Replace raise_barrier/lower_barrier with freeze_array/unfreeze_array when reconfiguring the array. raid1: Add a field array_frozen to indicate whether raid in freeze state. md: Convert use of typedef ctl_table to struct ctl_table md/raid5: avoid deadlock when raid5 array has unack badblocks during md_stop_writes. md: use MD_RECOVERY_INTR instead of kthread_should_stop in resync thread. md: fix some places where mddev_lock return value is not checked. raid5: Retry R5_ReadNoMerge flag when hit a read error. raid5: relieve lock contention in get_active_stripe() raid5: relieve lock contention in get_active_stripe() wait: add wait_event_cmd() md/raid5.c: add proper locking to error path of raid5_start_reshape. md: fix calculation of stacking limits on level change. raid5: Use slow_path to release stripe when mddev->thread is null
-
- 20 11月, 2013 29 次提交
-
-
由 Jens Axboe 提交于
We need it to make 'btt' from blktrace happy, otherwise we are missing one state transition. Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Shaohua Li 提交于
It isn't safe to call it without holding the vblk->vq_lock. Reported-by: NDave Chinner <david@fromorbit.com> Signed-off-by: NShaohua Li <shli@fusionio.com> Fixed another condition of virtqueue_kick() not holding the lock. Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Mahesh Rajashekhara 提交于
It appears that driver runs into a problem here if fibsize is too small because we allocate user_srbcmd with fibsize size only but later we access it until user_srbcmd->sg.count to copy it over to srbcmd. It is not correct to test (fibsize < sizeof(*user_srbcmd)) because this structure already includes one sg element and this is not needed for commands without data. So, we would recommend to add the following (instead of test for fibsize == 0). Signed-off-by: NMahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com> Reported-by: NNico Golde <nico@ngolde.de> Reported-by: NFabian Yamaguchi <fabs@goesec.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: "Mostly these are fixes for fallout due to merge window changes, as well as cures for problems that have been with us for a much longer period of time" 1) Johannes Berg noticed two major deficiencies in our genetlink registration. Some genetlink protocols we passing in constant counts for their ops array rather than something like ARRAY_SIZE(ops) or similar. Also, some genetlink protocols were using fixed IDs for their multicast groups. We have to retain these fixed IDs to keep existing userland tools working, but reserve them so that other multicast groups used by other protocols can not possibly conflict. In dealing with these two problems, we actually now use less state management for genetlink operations and multicast groups. 2) When configuring interface hardware timestamping, fix several drivers that simply do not validate that the hwtstamp_config value is one the driver actually supports. From Ben Hutchings. 3) Invalid memory references in mwifiex driver, from Amitkumar Karwar. 4) In dev_forward_skb(), set the skb->protocol in the right order relative to skb_scrub_packet(). From Alexei Starovoitov. 5) Bridge erroneously fails to use the proper wrapper functions to make calls to netdev_ops->ndo_vlan_rx_{add,kill}_vid. Fix from Toshiaki Makita. 6) When detaching a bridge port, make sure to flush all VLAN IDs to prevent them from leaking, also from Toshiaki Makita. 7) Put in a compromise for TCP Small Queues so that deep queued devices that delay TX reclaim non-trivially don't have such a performance decrease. One particularly problematic area is 802.11 AMPDU in wireless. From Eric Dumazet. 8) Fix crashes in tcp_fastopen_cache_get(), we can see NULL socket dsts here. Fix from Eric Dumzaet, reported by Dave Jones. 9) Fix use after free in ipv6 SIT driver, from Willem de Bruijn. 10) When computing mergeable buffer sizes, virtio-net fails to take the virtio-net header into account. From Michael Dalton. 11) Fix seqlock deadlock in ip4_datagram_connect() wrt. statistic bumping, this one has been with us for a while. From Eric Dumazet. 12) Fix NULL deref in the new TIPC fragmentation handling, from Erik Hugne. 13) 6lowpan bit used for traffic classification was wrong, from Jukka Rissanen. 14) macvlan has the same issue as normal vlans did wrt. propagating LRO disabling down to the real device, fix it the same way. From Michal Kubecek. 15) CPSW driver needs to soft reset all slaves during suspend, from Daniel Mack. 16) Fix small frame pacing in FQ packet scheduler, from Eric Dumazet. 17) The xen-netfront RX buffer refill timer isn't properly scheduled on partial RX allocation success, from Ma JieYue. 18) When ipv6 ping protocol support was added, the AF_INET6 protocol initialization cleanup path on failure was borked a little. Fix from Vlad Yasevich. 19) If a socket disconnects during a read/recvmsg/recvfrom/etc that blocks we can do the wrong thing with the msg_name we write back to userspace. From Hannes Frederic Sowa. There is another fix in the works from Hannes which will prevent future problems of this nature. 20) Fix route leak in VTI tunnel transmit, from Fan Du. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits) genetlink: make multicast groups const, prevent abuse genetlink: pass family to functions using groups genetlink: add and use genl_set_err() genetlink: remove family pointer from genl_multicast_group genetlink: remove genl_unregister_mc_group() hsr: don't call genl_unregister_mc_group() quota/genetlink: use proper genetlink multicast APIs drop_monitor/genetlink: use proper genetlink multicast APIs genetlink: only pass array to genl_register_family_with_ops() tcp: don't update snd_nxt, when a socket is switched from repair mode atm: idt77252: fix dev refcnt leak xfrm: Release dst if this dst is improper for vti tunnel netlink: fix documentation typo in netlink_set_err() be2net: Delete secondary unicast MAC addresses during be_close be2net: Fix unconditional enabling of Rx interface options net, virtio_net: replace the magic value ping: prevent NULL pointer dereference on write to msg_name bnx2x: Prevent "timeout waiting for state X" bnx2x: prevent CFC attention bnx2x: Prevent panic during DMAE timeout ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
Pull sparc fixes from David Miller: "Two merge window fallout build fixes" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: merge fix sparc64: fix build regession
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux由 Linus Torvalds 提交于
Pull ia64 fix from Tony Luck: "Unbreak ia64 build by avoiding circular dependency" * tag 'please-pull-fixia64' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: kernel/bounds: avoid circular dependencies in generated headers
-
由 Kirill A. Shutemov 提交于
<linux/spinlock.h> has heavy dependencies on other header files. It triggers circular dependencies in generated headers on IA64, at least: CC kernel/bounds.s In file included from /home/space/kas/git/public/linux/arch/ia64/include/asm/thread_info.h:9:0, from include/linux/thread_info.h:54, from include/asm-generic/preempt.h:4, from arch/ia64/include/generated/asm/preempt.h:1, from include/linux/preempt.h:18, from include/linux/spinlock.h:50, from kernel/bounds.c:14: /home/space/kas/git/public/linux/arch/ia64/include/asm/asm-offsets.h:1:35: fatal error: generated/asm-offsets.h: No such file or directory compilation terminated. Let's replace <linux/spinlock.h> with <linux/spinlock_types.h>, it's enough to find out size of spinlock_t. Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-and-Tested-by: NTony Luck <tony.luck@intel.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 David S. Miller 提交于
Johannes Berg says: ==================== genetlink: clean up multicast group APIs The generic netlink multicast group registration doesn't have to be dynamic, and can thus be simplified just like I did with the ops. This removes some complexity in registration code. Additionally, two users of generic netlink already use multicast groups in a wrong way, add workarounds for those two to keep the userspace API working, but at the same time make them not clash with other users of multicast groups as might happen now. While making it all a bit easier, also prevent such abuse by adding checks to the APIs so each family can only use the groups it owns. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
Register generic netlink multicast groups as an array with the family and give them contiguous group IDs. Then instead of passing the global group ID to the various functions that send messages, pass the ID relative to the family - for most families that's just 0 because the only have one group. This avoids the list_head and ID in each group, adding a new field for the mcast group ID offset to the family. At the same time, this allows us to prevent abusing groups again like the quota and dropmon code did, since we can now check that a family only uses a group it owns. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
This doesn't really change anything, but prepares for the next patch that will change the APIs to pass the group ID within the family, rather than the global group ID. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
Add a static inline to generic netlink to wrap netlink_set_err() to make it easier to use here - use it in openvswitch (the only generic netlink user of netlink_set_err()). Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
There's no reason to have the family pointer there since it can just be passed internally where needed, so remove it. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
There are no users of this API remaining, and we'll soon change group registration to be static (like ops are now) Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
There's no need to unregister the multicast group if the generic netlink family is registered immediately after. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
The quota code is abusing the genetlink API and is using its family ID as the multicast group ID, which is invalid and may belong to somebody else (and likely will.) Make the quota code use the correct API, but since this is already used as-is by userspace, reserve a family ID for this code and also reserve that group ID to not break userspace assumptions. Acked-by: NJan Kara <jack@suse.cz> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
The drop monitor code is abusing the genetlink API and is statically using the generic netlink multicast group 1, even if that group belongs to somebody else (which it invariably will, since it's not reserved.) Make the drop monitor code use the proper APIs to reserve a group ID, but also reserve the group id 1 in generic netlink code to preserve the userspace API. Since drop monitor can be a module, don't clear the bit for it on unregistration. Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
As suggested by David Miller, make genl_register_family_with_ops() a macro and pass only the array, evaluating ARRAY_SIZE() in the macro, this is a little safer. The openvswitch has some indirection, assing ops/n_ops directly in that code. This might ultimately just assign the pointers in the family initializations, saving the struct genl_family_and_ops and code (once mcast groups are handled differently.) Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrey Vagin 提交于
snd_nxt must be updated synchronously with sk_send_head. Otherwise tp->packets_out may be updated incorrectly, what may bring a kernel panic. Here is a kernel panic from my host. [ 103.043194] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 [ 103.044025] IP: [<ffffffff815aaaaf>] tcp_rearm_rto+0xcf/0x150 ... [ 146.301158] Call Trace: [ 146.301158] [<ffffffff815ab7f0>] tcp_ack+0xcc0/0x12c0 Before this panic a tcp socket was restored. This socket had sent and unsent data in the write queue. Sent data was restored in repair mode, then the socket was switched from reapair mode and unsent data was restored. After that the socket was switched back into repair mode. In that moment we had a socket where write queue looks like this: snd_una snd_nxt write_seq |_________|________| | sk_send_head After a second switching from repair mode the state of socket was changed: snd_una snd_nxt, write_seq |_________ ________| | sk_send_head This state is inconsistent, because snd_nxt and sk_send_head are not synchronized. Bellow you can find a call trace, how packets_out can be incremented twice for one skb, if snd_nxt and sk_send_head are not synchronized. In this case packets_out will be always positive, even when sk_write_queue is empty. tcp_write_wakeup skb = tcp_send_head(sk); tcp_fragment if (!before(tp->snd_nxt, TCP_SKB_CB(buff)->end_seq)) tcp_adjust_pcount(sk, skb, diff); tcp_event_new_data_sent tp->packets_out += tcp_skb_pcount(skb); I think update of snd_nxt isn't required, when a socket is switched from repair mode. Because it's initialized in tcp_connect_init. Then when a write queue is restored, snd_nxt is incremented in tcp_event_new_data_sent, so it's always is in consistent state. I have checked, that the bug is not reproduced with this patch and all tests about restoring tcp connections work fine. Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: NAndrey Vagin <avagin@openvz.org> Acked-by: NPavel Emelyanov <xemul@parallels.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ying Xue 提交于
init_card() calls dev_get_by_name() to get a network deceive. But it doesn't decrease network device reference count after the device is used. Signed-off-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 fan.du 提交于
After searching rt by the vti tunnel dst/src parameter, if this rt has neither attached to any transformation nor the transformation is not tunnel oriented, this rt should be released back to ip layer. otherwise causing dst memory leakage. Signed-off-by: NFan Du <fan.du@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rafael J. Wysocki 提交于
* acpi-hotplug: PCI / hotplug / ACPI: Drop unused acpiphp_debug declaration
-
由 Mika Westerberg 提交于
Commit bd950799 (PCI: acpiphp: Convert to dynamic debug) removed users of acpiphp_debug variable and the variable itself but the declaration was left in the header file. Drop this unused declaration. Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com> Acked-by: NBjorn Helgaas <bhelgaas@google.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Johannes Berg 提交于
The parameter is just 'group', not 'groups', fix the documentation typo. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc由 Linus Torvalds 提交于
Pull second set of ARC changes from Vineet Gupta: - Support for Perf from Mischa - Enabling GPIO/Pinctrl drivers for Abilis TB10x platform - New defconfig for buildroot * tag 'arc-v3.13-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [plat-arcfpga] Add defconfig without initramfs location ARC: perf: ARC 700 PMU doesn't support sampling events ARC: Add documentation on DT binding for ARC700 PMU ARC: Add perf support for ARC700 cores ARC: [TB10x] Updates for GPIO and pinctrl
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull second set of s390 patches from Martin Schwidefsky: "The handling of the PCI hotplug notifications has been improved, the zfcp dumper can now detect the HSA size dynamically and the default install kernel has been changed to the compressed bzImage. And two bug-fixes for scm and 3720" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: implement hotplug notifications s390/scm_block: do not hide eadm subchannel dependency s390/sclp: Consolidate early sclp init calls to sclp_early_detect() s390/sclp: Move early code from sclp_cmd.c to sclp_early.c s390/sclp: Determine HSA size dynamically for zfcpdump s390/sclp: Move declarations for sclp_sdias into separate header file s390/pci: implement pcibios_remove_bus s390/pci: improve handling of bus resources s390/3270: fix missing device_destroy() call s390/boot: Install bzImage as default kernel image
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml由 Linus Torvalds 提交于
Pull UML changes from Richard Weinberger: "This pile contains a nice defconfig cleanup, a rewritten stack unwinder and various cleanups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Remove unused declarations from <as-layout.h> um: remove used STDIO_CONSOLE Kconfig param um/vdso: add .gitignore for a couple of targets arch/um: make it work with defconfig and x86_64 um: Make kstack_depth_to_print conform to arch/x86 um: Get rid of thread_struct->saved_task um: Make stack trace reliable against kernel mode faults um: Rewrite show_stack()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fix from Ingo Molnar: "A modular build fix for certain .config's" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Export 'boot_cpu_physical_apicid' to modules
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq cleanups from Ingo Molnar: "This is a multi-arch cleanup series from Thomas Gleixner, which we kept to near the end of the merge window, to not interfere with architecture updates. This series (motivated by the -rt kernel) unifies more aspects of IRQ handling and generalizes PREEMPT_ACTIVE" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: preempt: Make PREEMPT_ACTIVE generic sparc: Use preempt_schedule_irq ia64: Use preempt_schedule_irq m32r: Use preempt_schedule_irq hardirq: Make hardirq bits generic m68k: Simplify low level interrupt handling code genirq: Prevent spurious detection for unconditionally polled interrupts
-
由 Jens Axboe 提交于
If disk stats are enabled on the queue, a request needs to be marked with REQ_IO_STAT for accounting to be active on that request. This fixes an issue with virtio-blk not showing up in /proc/diskstats after the conversion to blk-mq. Add QUEUE_FLAG_MQ_DEFAULT, setting stats and same cpu-group completion on by default. Reported-by: NDave Chinner <david@fromorbit.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 19 11月, 2013 5 次提交
-
-
由 majianpeng 提交于
When we change group_thread_cnt from sysfs entry, it can OOPS. The kernel messages are: [ 135.299021] BUG: unable to handle kernel NULL pointer dereference at (null) [ 135.299073] IP: [<ffffffff815188ab>] handle_active_stripes+0x32b/0x440 [ 135.299107] PGD 0 [ 135.299122] Oops: 0000 [#1] SMP [ 135.299144] Modules linked in: netconsole e1000e ptp pps_core [ 135.299188] CPU: 3 PID: 2225 Comm: md0_raid5 Not tainted 3.12.0+ #24 [ 135.299214] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080015 11/09/2011 [ 135.299255] task: ffff8800b9638f80 ti: ffff8800b77a4000 task.ti: ffff8800b77a4000 [ 135.299283] RIP: 0010:[<ffffffff815188ab>] [<ffffffff815188ab>] handle_active_stripes+0x32b/0x440 [ 135.299323] RSP: 0018:ffff8800b77a5c48 EFLAGS: 00010002 [ 135.299344] RAX: ffff880037bb5c70 RBX: 0000000000000000 RCX: 0000000000000008 [ 135.299371] RDX: ffff880037bb5cb8 RSI: 0000000000000001 RDI: ffff880037bb5c00 [ 135.299398] RBP: ffff8800b77a5d08 R08: 0000000000000001 R09: 0000000000000000 [ 135.299425] R10: ffff8800b77a5c98 R11: 00000000ffffffff R12: ffff880037bb5c00 [ 135.299452] R13: 0000000000000000 R14: 0000000000000000 R15: ffff880037bb5c70 [ 135.299479] FS: 0000000000000000(0000) GS:ffff88013fd80000(0000) knlGS:0000000000000000 [ 135.299510] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 135.299532] CR2: 0000000000000000 CR3: 0000000001c0b000 CR4: 00000000000407e0 [ 135.299559] Stack: [ 135.299570] ffff8800b77a5c88 ffffffff8107383e ffff8800b77a5c88 ffff880037a64300 [ 135.299611] 000000000000ec08 ffff880037bb5cb8 ffff8800b77a5c98 ffffffffffffffd8 [ 135.299654] 000000000000ec08 ffff880037bb5c60 ffff8800b77a5c98 ffff8800b77a5c98 [ 135.299696] Call Trace: [ 135.299711] [<ffffffff8107383e>] ? __wake_up+0x4e/0x70 [ 135.299733] [<ffffffff81518f88>] raid5d+0x4c8/0x680 [ 135.299756] [<ffffffff817174ed>] ? schedule_timeout+0x15d/0x1f0 [ 135.299781] [<ffffffff81524c9f>] md_thread+0x11f/0x170 [ 135.299804] [<ffffffff81069cd0>] ? wake_up_bit+0x40/0x40 [ 135.299826] [<ffffffff81524b80>] ? md_rdev_init+0x110/0x110 [ 135.299850] [<ffffffff81069656>] kthread+0xc6/0xd0 [ 135.299871] [<ffffffff81069590>] ? kthread_freezable_should_stop+0x70/0x70 [ 135.299899] [<ffffffff81722ffc>] ret_from_fork+0x7c/0xb0 [ 135.299923] [<ffffffff81069590>] ? kthread_freezable_should_stop+0x70/0x70 [ 135.299951] Code: ff ff ff 0f 84 d7 fe ff ff e9 5c fe ff ff 66 90 41 8b b4 24 d8 01 00 00 45 31 ed 85 f6 0f 8e 7b fd ff ff 49 8b 9c 24 d0 01 00 00 <48> 3b 1b 49 89 dd 0f 85 67 fd ff ff 48 8d 43 28 31 d2 eb 17 90 [ 135.300005] RIP [<ffffffff815188ab>] handle_active_stripes+0x32b/0x440 [ 135.300005] RSP <ffff8800b77a5c48> [ 135.300005] CR2: 0000000000000000 [ 135.300005] ---[ end trace 504854e5bb7562ed ]--- [ 135.300005] Kernel panic - not syncing: Fatal exception This is because raid5d() can be running when the multi-thread resources are changed via system. We see need to provide locking. mddev->device_lock is suitable, but we cannot simple call alloc_thread_groups under this lock as we cannot allocate memory while holding a spinlock. So change alloc_thread_groups() to allocate and return the data structures, then raid5_store_group_thread_cnt() can take the lock while updating the pointers to the data structures. This fixes a bug introduced in 3.12 and so is suitable for the 3.12.x stable series. Fixes: b721420e Cc: stable@vger.kernel.org (3.12) Signed-off-by: NJianpeng Ma <majianpeng@gmail.com> Signed-off-by: NNeilBrown <neilb@suse.de> Reviewed-by: NShaohua Li <shli@kernel.org>
-
由 majianpeng 提交于
When changing group_thread_cnt from sysfs entry, the kernel can oops. The kernel messages are: [ 740.961389] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 740.961444] IP: [<ffffffff81062570>] process_one_work+0x30/0x500 [ 740.961476] PGD b9013067 PUD b651e067 PMD 0 [ 740.961503] Oops: 0000 [#1] SMP [ 740.961525] Modules linked in: netconsole e1000e ptp pps_core [ 740.961577] CPU: 0 PID: 3683 Comm: kworker/u8:5 Not tainted 3.12.0+ #23 [ 740.961602] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080015 11/09/2011 [ 740.961646] task: ffff88013abe0000 ti: ffff88013a246000 task.ti: ffff88013a246000 [ 740.961673] RIP: 0010:[<ffffffff81062570>] [<ffffffff81062570>] process_one_work+0x30/0x500 [ 740.961708] RSP: 0018:ffff88013a247e08 EFLAGS: 00010086 [ 740.961730] RAX: ffff8800b912b400 RBX: ffff88013a61e680 RCX: ffff8800b912b400 [ 740.961757] RDX: ffff8800b912b600 RSI: ffff8800b912b600 RDI: ffff88013a61e680 [ 740.961782] RBP: ffff88013a247e48 R08: ffff88013a246000 R09: 000000000002c09d [ 740.961808] R10: 000000000000010f R11: 0000000000000000 R12: ffff88013b00cc00 [ 740.961833] R13: 0000000000000000 R14: ffff88013b00cf80 R15: ffff88013a61e6b0 [ 740.961861] FS: 0000000000000000(0000) GS:ffff88013fc00000(0000) knlGS:0000000000000000 [ 740.961893] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 740.962001] CR2: 00000000000000b8 CR3: 00000000b24fe000 CR4: 00000000000407f0 [ 740.962001] Stack: [ 740.962001] 0000000000000008 ffff8800b912b600 ffff88013b00cc00 ffff88013a61e680 [ 740.962001] ffff88013b00cc00 ffff88013b00cc18 ffff88013b00cf80 ffff88013a61e6b0 [ 740.962001] ffff88013a247eb8 ffffffff810639c6 0000000000012a80 ffff88013a247fd8 [ 740.962001] Call Trace: [ 740.962001] [<ffffffff810639c6>] worker_thread+0x206/0x3f0 [ 740.962001] [<ffffffff810637c0>] ? manage_workers+0x2c0/0x2c0 [ 740.962001] [<ffffffff81069656>] kthread+0xc6/0xd0 [ 740.962001] [<ffffffff81069590>] ? kthread_freezable_should_stop+0x70/0x70 [ 740.962001] [<ffffffff81722ffc>] ret_from_fork+0x7c/0xb0 [ 740.962001] [<ffffffff81069590>] ? kthread_freezable_should_stop+0x70/0x70 [ 740.962001] Code: 89 e5 41 57 41 56 41 55 45 31 ed 41 54 53 48 89 fb 48 83 ec 18 48 8b 06 4c 8b 67 48 48 89 c1 30 c9 a8 04 4c 0f 45 e9 80 7f 58 00 <49> 8b 45 08 44 8b b0 00 01 00 00 78 0c 41 f6 44 24 10 04 0f 84 [ 740.962001] RIP [<ffffffff81062570>] process_one_work+0x30/0x500 [ 740.962001] RSP <ffff88013a247e08> [ 740.962001] CR2: 0000000000000008 [ 740.962001] ---[ end trace 39181460000748de ]--- [ 740.962001] Kernel panic - not syncing: Fatal exception This can happen if there are some stripes left, fewer than MAX_STRIPE_BATCH. A worker is queued to handle them. But before calling raid5_do_work, raid5d handles those stripes making conf->active_stripe = 0. So mddev_suspend() can return. We might then free old worker resources before the queued raid5_do_work() handled them. When it runs, it crashes. raid5d() raid5_store_group_thread_cnt() queue_work mddev_suspend() handle_strips active_stripe=0 free(old worker resources) process_one_work raid5_do_work To avoid this, we should only flush the worker resources before freeing them. This fixes a bug introduced in 3.12 so is suitable for the 3.12.x stable series. Cc: stable@vger.kernel.org (3.12) Fixes: b721420eSigned-off-by: NJianpeng Ma <majianpeng@gmail.com> Signed-off-by: NNeilBrown <neilb@suse.de> Reviewed-by: NShaohua Li <shli@kernel.org>
-
由 majianpeng 提交于
For R5_ReadNoMerge,it mean this bio can't merge with other bios or request.It used REQ_FLUSH to achieve this. But REQ_NOMERGE can do the same work. Signed-off-by: NJianpeng Ma <majianpeng@gmail.com> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 Aurelien Jarno 提交于
linux/raid/md_p.h is using conditionals depending on endianess and fails with an error if neither of __BIG_ENDIAN, __LITTLE_ENDIAN or __BYTE_ORDER are defined, but it doesn't include any header which can define these constants. This make this header unusable alone. This patch adds a #include <asm/byteorder.h> at the beginning of this header to make it usable alone. This is needed to compile klibc on MIPS. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 majianpeng 提交于
There is an iobarrier in raid1 because of contention between normal IO and resync IO. It suspends all normal IO when resync/recovery happens. However if normal IO is out side the resync window, there is no contention. So this patch changes the barrier mechanism to only block IO that could contend with the resync that is currently happening. We partition the whole space into five parts. |---------|-----------|------------|----------------|-------| start next_resync start_next_window end_window start + RESYNC_WINDOW = next_resync next_resync + NEXT_NORMALIO_DISTANCE = start_next_window start_next_window + NEXT_NORMALIO_DISTANCE = end_window Firstly we introduce some concepts: 1 - RESYNC_WINDOW: For resync, there are 32 resync requests at most at the same time. A sync request is RESYNC_BLOCK_SIZE(64*1024). So the RESYNC_WINDOW is 32 * RESYNC_BLOCK_SIZE, that is 2MB. 2 - NEXT_NORMALIO_DISTANCE: the distance between next_resync and start_next_window. It also indicates the distance between start_next_window and end_window. It is currently 3 * RESYNC_WINDOW_SIZE but could be tuned if this turned out not to be optimal. 3 - next_resync: the next sector at which we will do sync IO. 4 - start: a position which is at most RESYNC_WINDOW before next_resync. 5 - start_next_window: a position which is NEXT_NORMALIO_DISTANCE beyond next_resync. Normal-io after this position doesn't need to wait for resync-io to complete. 6 - end_window: a position which is 2 * NEXT_NORMALIO_DISTANCE beyond next_resync. This also doesn't need to wait, but is counted differently. 7 - current_window_requests: the count of normalIO between start_next_window and end_window. 8 - next_window_requests: the count of normalIO after end_window. NormalIO will be partitioned into four types: NormIO1: the end sector of bio is smaller or equal the start NormIO2: the start sector of bio larger or equal to end_window NormIO3: the start sector of bio larger or equal to start_next_window. NormIO4: the location between start_next_window and end_window |--------|-----------|--------------------|----------------|-------------| | start | next_resync | start_next_window | end_window | NormIO1 NormIO4 NormIO4 NormIO3 NormIO2 For NormIO1, we don't need any io barrier. For NormIO4, we used a similar approach to the original iobarrier mechanism. The normalIO and resyncIO must be kept separate. For NormIO2/3, we add two fields to struct r1conf: "current_window_requests" and "next_window_requests". They indicate the count of active requests in the two window. For these, we don't wait for resync io to complete. For resync action, if there are NormIO4s, we must wait for it. If not, we can proceed. But if resync action reaches start_next_window and current_window_requests > 0 (that is there are NormIO3s), we must wait until the current_window_requests becomes zero. When current_window_requests becomes zero, start_next_window also moves forward. Then current_window_requests will replaced by next_window_requests. There is a problem which when and how to change from NormIO2 to NormIO3. Only then can sync action progress. We add a field in struct r1conf "start_next_window". A: if start_next_window == MaxSector, it means there are no NormIO2/3. So start_next_window = next_resync + NEXT_NORMALIO_DISTANCE B: if current_window_requests == 0 && next_window_requests != 0, it means start_next_window move to end_window There is another problem which how to differentiate between old NormIO2(now it is NormIO3) and NormIO2. For example, there are many bios which are NormIO2 and a bio which is NormIO3. NormIO3 firstly completed, so the bios of NormIO2 became NormIO3. We add a field in struct r1bio "start_next_window". This is used to record the position conf->start_next_window when the call to wait_barrier() is made in make_request(). In allow_barrier(), we check the conf->start_next_window. If r1bio->stat_next_window == conf->start_next_window, it means there is no transition between NormIO2 and NormIO3. If r1bio->start_next_window != conf->start_next_window, it mean there was a transition between NormIO2 and NormIO3. There can only have been one transition. So it only means the bio is old NormIO2. For one bio, there may be many r1bio's. So we make sure all the r1bio->start_next_window are the same value. If we met blocked_dev in make_request(), it must call allow_barrier and wait_barrier. So the former and the later value of conf->start_next_window will be change. If there are many r1bio's with differnet start_next_window, for the relevant bio, it depend on the last value of r1bio. It will cause error. To avoid this, we must wait for previous r1bios to complete. Signed-off-by: NJianpeng Ma <majianpeng@gmail.com> Signed-off-by: NNeilBrown <neilb@suse.de>
-