- 08 12月, 2006 40 次提交
-
-
由 Kyle McMartin 提交于
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Helge Deller 提交于
Signed-off-by: NHelge Deller <deller@gmx.de> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Matthew Wilcox 提交于
Firmware ignores Cardbus bridges, so when Linux assigns bus numbers, it must override firmware's notion of what the busses are numbered. This is not sufficient to support the Cardbus bridge as there is also no interrupt routing table entry for them. Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Kyle McMartin 提交于
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Matthew Wilcox 提交于
0/NULL changes, __user annotations, __iomem annotations Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Matthew Wilcox 提交于
0/NULL, missing __user, missing __iomem, non-ANSI prototype. Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Matthew Wilcox 提交于
Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Ryan Bradetich 提交于
Willy pointed out the hversion is already stored in the parisc_device, so I do not need to extract this information directly from the IODC data. Also by using the information in the parisc_device I can avoid re-reading the IODC data for the Muxes with specifed port counts. Signed-off-by: NRyan Bradetich <rbrad@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Ryan Bradetich 提交于
This patch adds a new function to return the actual number of ports available. Some of the built-in Muxes return the number of supported ports, but not all of these port are available for use. Signed-off-by: NRyan Bradetich <rbrad@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Ryan Bradetich 提交于
This patch follows the example of the 8250_gsc driver by probing for specific built-in Mux cards first. This allows the system to preserve the correct detection order with multiple Mux cards. Signed-off-by: NRyan Bradetich <rbrad@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Ryan Bradetich 提交于
The following updates are based off a patch from willy: * Removal of the mux_card list. * Add the mux_remove function. Other updates: * Re-organize the driver structure a bit to make the mux_init and mux_exit functions more symmetrical. * Added the del_timer. * Unregistered the console. At this point I can insmod, rmmod, and re-insmod the mux without any failures. Signed-off-by: NRyan Bradetich <rbrad@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Ryan Bradetich 提交于
This patch claims the iomem resources for the Mux driver. Signed-off-by: NRyan Bradetich <rbrad@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Ryan Bradetich 提交于
This patch changes the Mux console to use the Mux hardware instead of the PDC Software console. Signed-off-by: NRyan Bradetich <rbrad@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Ryan Bradetich 提交于
This patch addresses the problems identified by Russell King in the following email: http://lists.parisc-linux.org/pipermail/parisc-linux/2005-December/027912.htmlSigned-off-by: NRyan Bradetich <rbrad@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Ryan Bradetich 提交于
This patch addresses the following issues: * Removes an incorrect comment. * Fixes a couple of compiler warnings. * Properly detects the HP-PB bus on E-Class systems. Signed-off-by: NRyan Bradetich <rbrad@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Ryan Bradetich 提交于
This patch fixes the ccio_request_resource to work properly when the CONFIG_IOMMU_CCIO is not defined. This patch was tested on my E35. Signed-off-by: NRyan Bradetich <rbrad@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Kyle McMartin 提交于
The `simple' way of walking and checking PageReserved is broken on discontigmem, instead we need to check each range explicitly. (Also rename a few things so they make more sense.) Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Helge Deller 提交于
Signed-off-by: NHelge Deller <deller@gmx.de> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Matthew Wilcox 提交于
I deleted this file from 2.4 5 years ago. Unfortunately, that change never got merged to Linus and so when we switched to 2.5 it came back and nobody noticed. It's never been built in 2.5/2.6 as it was never in the Makefile. Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (55 commits) ieee1394: sbp2: code formatting around work_struct stuff ieee1394: nodemgr: remove a kcalloc ieee1394: conditionally export ieee1394_bus_type ieee1394: Consolidate driver registering ieee1394: sbp2: convert from PCI DMA to generic DMA ieee1394: nodemgr: spaces to tabs ieee1394: nodemgr: fix deadlock in shutdown ieee1394: nodemgr: remove duplicate assignment sbp2: make 1bit bitfield unsigned ieee1394: schedule *_oui sysfs attributes for removal ieee1394: schedule unused symbol exports for removal ieee1394: dv1394: schedule for feature removal ieee1394: raw1394: defer feature removal of old isoch interface ieee1394: ohci1394: call PMac code in shutdown only for proper machines ieee1394: ohci1394: reformat PPC_PMAC platform code ieee1394: ohci1394: add PPC_PMAC platform code to driver probe ieee1394: sbp2: wrap two functions into one ieee1394: sbp2: update comment on things to do ieee1394: sbp2: use list_move_tail() ieee1394: sbp2: more concise names for types and variables ...
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (76 commits) [ARM] 4002/1: S3C24XX: leave parent IRQs unmasked [ARM] 4001/1: S3C24XX: shorten reboot time [ARM] 3983/2: remove unused argument to __bug() [ARM] 4000/1: Osiris: add third serial port in [ARM] 3999/1: RX3715: suspend to RAM support [ARM] 3998/1: VR1000: LED platform devices [ARM] 3995/1: iop13xx: add iop13xx support [ARM] 3968/1: iop13xx: add iop13xx_defconfig [ARM] Update mach-types [ARM] Allow gcc to optimise arm_add_memory a little more [ARM] 3991/1: i.MX/MX1 high resolution time source [ARM] 3990/1: i.MX/MX1 more precise PLL decode [ARM] 3986/1: H1940: suspend to RAM support [ARM] 3985/1: ixp4xx clocksource cleanup [ARM] 3984/1: ixp4xx/nslu2: Fix disk LED numbering (take 2) [ARM] 3994/1: ixp23xx: fix handling of pci master aborts [ARM] 3981/1: sched_clock for PXA2xx [ARM] 3980/1: extend the ARM Versatile sched_clock implementation from 32 to 63 bit [ARM] 3979/1: extend the SA11x0 sched_clock implementation from 32 to 63 bit period [ARM] 3978/1: macro to provide a 63-bit value from a 32-bit hardware counter ...
-
由 Linus Torvalds 提交于
* 'release' of master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] replace kmalloc+memset with kzalloc [IA64] resolve name clash by renaming is_available_memory() [IA64] Need export for csum_ipv6_magic [IA64] Fix DISCONTIGMEM without VIRTUAL_MEM_MAP [PATCH] Add support for type argument in PAL_GET_PSTATE [IA64] tidy up return value of ip_fast_csum [IA64] implement csum_ipv6_magic for ia64. [IA64] More Itanium PAL spec updates [IA64] Update processor_info features [IA64] Add se bit to Processor State Parameter structure [IA64] Add dp bit to cache and bus check structs [IA64] SN: Correctly update smp_affinty mask [IA64] sparse cleanups [IA64] IA64 Kexec/kdump
-
由 Russell King 提交于
Merge: Atmel AT91RM9200 and AT91SAM9260 changes General ARM developments Disconfiguous memory cleanups 64-bit/32-bit division and sched_clock extension patches EP93xx support changes IOP support changes Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Linus Torvalds 提交于
* 'intx' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6: PCI MSI: always toggle legacy-INTx-enable bit upon MSI entry/exit
-
由 Ben Dooks 提交于
Do not bother masking/unmasking the parent IRQ for the mulitplexed EINT irqs, as masking the leaf seems to be fine. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Cut down the time between requesting a reboot and actually getting the reboot to happen by a quarter. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Jeff Garzik 提交于
The current code (prior to this change) would disable the PCI INTx legacy interrupt when enabling MSI... but only on PCI Express. We should do this for all MSI devices, for safety's sake. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Nicolas Pitre 提交于
It appears that include/asm-arm/bug.h requires include/linux/stddef.h for the definition of NULL. It seems that stddef.h was always included indirectly in most cases, and that issue was properly fixed a while ago. Then commit 5047f09b incorrectly reverted change from commit ff10952a (bad dwmw2) and the problem recently resurfaced. Because the third argument to __bug() is never used anyway, RMK suggested getting rid of it entirely instead of readding #include <linux/stddef.h> which this patch does. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Add the mapping for the third S3C2440 serial port into the default serial devices for the Osiris. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
The RX3715 is similar to the H1940 in the way that suspend to RAM works, so we can use most of the extant support for the H1940 with only a few modifictions Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Support for the GPIO attached LEDs on the VR1000 Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Stefan Richter 提交于
Merge is finished, can bring the code in readable style again. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Was I sleepwalking when I wrote this? Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Follow-up to patch "Consolidate driver registering": Since I plan the lifetime of Linux 2.6.20 to be the deprecation phase of CONFIG_IEEE1394_EXPORT_FULL_API, it seems fair to keep all previously exported symbols available with this option until this phase is over. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Ben Collins 提交于
This patch consolidates some bookkeeping for driver registering. It closely models what pci_register_driver() does. The main addition is that the owner of the driver is set, so we get a proper symlink for /sys/bus/ieee1394/driver/*/module. Also moves setting of name and bus type into nodemgr. Because of this, we can remove the EXPORT_SYMBOL for ieee1394_bus_type, since it's now only used in ieee1394.ko. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
API conversion without change in functionality Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
whitespace pedantry Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
If "modprobe ohci1394" was quickly followed by "modprobe -r ohci1394", say with 1 second pause in between, the modprobe -r got stuck in uninterruptible sleep in kthread_stop. At the same time the knodemgrd slept uninterruptibly in bus_rescan_devices_helper. That's because driver_detach took the semaphore of the PCI device and bus_rescan_devices_helper wanted to take the semaphore of the FireWire host device's parent, which is the same semaphore. This was a regression since Linux 2.6.16, commit bf74ad5b, "Hold the device's parent's lock during probe and remove". The fix (or workaround) adds a dummy driver to the hpsb_host device. Now bus_rescan_devices_helper won't scan the host device anymore. This doesn't hurt since we have no drivers which will bind to these devices and it is unlikely that there will ever be such a driver. The dummy driver is befittingly presented as a representation of ieee1394 itself. Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=6706Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Luca Tettamanti 提交于
A signed single-bit bitfield doesn't make much sense. Make it unsigned. Signed-off-by: NLuca Tettamanti <kronos.it@gmail.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-