- 15 2月, 2014 17 次提交
-
-
git://neil.brown.name/md由 Linus Torvalds 提交于
Pull md fixes from Neil Brown: "Two bugfixes for md both tagged for -stable" * tag 'md/3.14-fixes' of git://neil.brown.name/md: md/raid5: Fix CPU hotplug callback registration md/raid1: restore ability for check and repair to fix read errors.
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Paolo Bonzini: "A small error handling problem and a compile breakage for ARM64" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: arm64: KVM: Add VGIC device control for arm64 KVM: return an error code in kvm_vm_ioctl_register_coalesced_mmio()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Peter Anvin: "A collection of small fixes: - There still seem to be problems with asm goto which requires the empty asm hack. - If SMAP is disabled at compile time, don't enable it nor try to interpret a page fault as an SMAP violation. - Fix a case of unbounded recursion while tracing" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, smap: smap_violation() is bogus if CONFIG_X86_SMAP is off x86, smap: Don't enable SMAP if CONFIG_X86_SMAP is disabled compiler/gcc4: Make quirk for asm_volatile_goto() unconditional x86: Use preempt_disable_notrace() in cycles_2_ns()
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI and power management fixes from Rafael Wysocki: "These include a fix for a recent intel_pstate regression, a fix for a regression in the ACPI-based PCI hotplug (ACPIPHP) code introduced during the 3.12 cycle, fixes for two bugs in the ACPI core introduced recently and a MAINTAINERS update related to cpufreq. Specifics: - Fix for a recent regression in the intel_pstate driver that introduced a race condition causing systems to crash during initialization in some situations. This removes the affected code altogether. From Dirk Brandewie. - ACPIPHP fix for a regression introduced during the 3.12 cycle causing devices to be dropped as a result of bus check notifications after system resume on some systems due to the way ACPIPHP interprets _STA return values (arguably incorrectly). From Mika Westerberg. - ACPI dock driver fix for a problem causing docking to fail due to a check that always fails after recent ACPI core changes (found by code inspection). - ACPI container driver fix to prevent memory from being leaked in an error code path after device_register() failures. - Update of the arm_big_little cpufreq driver maintainer's e-mail address" * tag 'pm+acpi-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: MAINTAINERS / cpufreq: update Sudeep's email address intel_pstate: Remove energy reporting from pstate_sample tracepoint ACPI / container: Fix error code path in container_device_attach() ACPI / hotplug / PCI: Relax the checking of _STA return values ACPI / dock: Use acpi_device_enumerated() to check if dock is present
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp由 Linus Torvalds 提交于
Pull EDAC fixes from Borislav Petkov: "Fix polling timeout setting through sysfs. You're surely wondering why the patches are not based on an rc. Well, Andrew sent you 79040cad ("drivers/edac/edac_mc_sysfs.c: poll timeout cannot be zero sent you") already (it got in in -rc2) but it is not enough as a fix because for one, setting too low polling intervals (< 1sec) don't make any sense and cause unnecessary polling load on the system. Then, even if we set some interval, we explode with [ 4143.094342] WARNING: CPU: 1 PID: 0 at kernel/workqueue.c:1393 __queue_work+0x1d7/0x340() because the workqueue setup path is used also for the timeout period resetting and we're doing INIT_DELAYED_WORK() on an already active workqueue. Which is total bollocks. So this is taken care of by the second patch. I've CCed stable for those two" * tag 'edac_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC: Correct workqueue setup path EDAC: Poll timeout cannot be zero, p2
-
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux由 Linus Torvalds 提交于
Pull fbdev fixes from Tomi Valkeinen: "Minor fbdev fixes for 3.14" * tag 'fbdev-fixes-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: video: Kconfig: Allow more broad selection of the imxfb framebuffer driver. video: exynos: Fix S6E8AX0 LCD driver build error OMAPDSS: fix fck field types OMAPDSS: DISPC: decimation rounding fix
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block IO fixes from Jens Axboe: "Second round of updates and fixes for 3.14-rc2. Most of this stuff has been queued up for a while. The notable exception is the blk-mq changes, which are naturally a bit more in flux still. The pull request contains: - Two bug fixes for the new immutable vecs, causing crashes with raid or swap. From Kent. - Various blk-mq tweaks and fixes from Christoph. A fix for integrity bio's from Nic. - A few bcache fixes from Kent and Darrick Wong. - xen-blk{front,back} fixes from David Vrabel, Matt Rushton, Nicolas Swenson, and Roger Pau Monne. - Fix for a vec miscount with integrity vectors from Martin. - Minor annotations or fixes from Masanari Iida and Rashika Kheria. - Tweak to null_blk to do more normal FIFO processing of requests from Shlomo Pongratz. - Elevator switching bypass fix from Tejun. - Softlockup in blkdev_issue_discard() fix when !CONFIG_PREEMPT from me" * 'for-linus' of git://git.kernel.dk/linux-block: (31 commits) block: add cond_resched() to potentially long running ioctl discard loop xen-blkback: init persistent_purge_work work_struct blk-mq: pair blk_mq_start_request / blk_mq_requeue_request blk-mq: dont assume rq->errors is set when returning an error from ->queue_rq block: Fix cloning of discard/write same bios block: Fix type mismatch in ssize_t_blk_mq_tag_sysfs_show blk-mq: rework flush sequencing logic null_blk: use blk_complete_request and blk_mq_complete_request virtio_blk: use blk_mq_complete_request blk-mq: rework I/O completions fs: Add prototype declaration to appropriate header file include/linux/bio.h fs: Mark function as static in fs/bio-integrity.c block/null_blk: Fix completion processing from LIFO to FIFO block: Explicitly handle discard/write same segments block: Fix nr_vecs for inline integrity vectors blk-mq: Add bio_integrity setup to blk_mq_make_request blk-mq: initialize sg_reserved_size blk-mq: handle dma_drain_size blk-mq: divert __blk_put_request for MQ ops blk-mq: support at_head inserations for blk_execute_rq ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "Again only fixes for HD-audio: - regression fixes due to the modularization - a few fixups for Dell, Sony and HP laptops - a revert of the previous fix as it leads to another regression" * tag 'sound-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: Revert "ALSA: hda/realtek - Avoid invalid COEFs for ALC271X" ALSA: hda - Fix undefined symbol due to builtin/module mixup ALSA: hda - Fix mic capture on Sony VAIO Pro 11 ALSA: hda - Add a headset quirk for Dell XPS 13 ALSA: hda - Fix inconsistent Mic mute LED ALSA: hda - Fix leftover ifdef checks after modularization
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
Pull RDMA/InfiniBand fixes from Roland Dreier: - Fix some rough edges from the "IP addressing for IBoE" merge - Other misc fixes, mostly to hardware drivers * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (21 commits) RDMA/ocrdma: Fix load time panic during GID table init RDMA/ocrdma: Fix traffic class shift IB/iser: Fix use after free in iser_snd_completion() IB/iser: Avoid dereferencing iscsi_iser conn object when not bound to iser connection IB/usnic: Fix smatch endianness error IB/mlx5: Remove dependency on X86 mlx5: Add include of <linux/slab.h> because of kzalloc()/kfree() use IB/qib: Add missing serdes init sequence RDMA/cxgb4: Add missing neigh_release in LE-Workaround path IB: Report using RoCE IP based gids in port caps IB/mlx4: Build the port IBoE GID table properly under bonding IB/mlx4: Do IBoE GID table resets per-port IB/mlx4: Do IBoE locking earlier when initializing the GID table IB/mlx4: Move rtnl locking to the right place IB/mlx4: Make sure GID index 0 is always occupied IB/mlx4: Don't allocate range of steerable UD QPs for Ethernet-only device RDMA/amso1100: Fix error return code RDMA/nes: Fix error return code IB/mlx5: Don't set "block multicast loopback" capability IB/mlx5: Fix binary compatibility with libmlx5 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging由 Linus Torvalds 提交于
Pull hwmon fix from Guenter Roeck: "Fix arithmetic overflow in ntc_thermistor driver" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ntc_thermistor) Avoid math overflow
-
git://git.infradead.org/battery-2.6由 Linus Torvalds 提交于
Pull battery fixes from Dmitry Eremin-Solenikov: - Fix NULL pointer dereference in max17040 driver - Add bq2415x dts bindings documentation - Fix misleading comment in ds2782 driver - Remove useless check in isp1704 charger driver. * tag 'for-v3.14-fixes' of git://git.infradead.org/battery-2.6: power: max17040: Fix NULL pointer dereference when there is no platform_data dt: binding documentation for bq2415x charger isp1704_charger: remove useless check in isp1704_charger_probe() power: ds2782_battery: Typo in comment
-
由 Roland Dreier 提交于
Merge branches 'cma', 'cxgb4', 'iser', 'misc', 'mlx4', 'mlx5', 'nes', 'ocrdma', 'qib' and 'usnic' into for-next
-
由 Devesh Sharma 提交于
We should use rdma_vlan_dev_real_dev() instead of using vlan_dev_real_dev() when building the GID table for a vlan interface. Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Devesh Sharma 提交于
Use correct value for obtaining traffic class from device response for Query QP request. Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com> Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Dan Carpenter 提交于
We use "tx_desc" again after we free it. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Roi Dayan 提交于
Fix a possible NULL pointer dereference in disconnection flow. This can happen if the target disconnected/rejected the connection request, e.g before the binding stage between iscsi connection to the transport connection. Signed-off-by: NAlex Tabachnik <alext@mellanox.com> Signed-off-by: NRoi Dayan <roid@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Upinder Malhi 提交于
Error reported at http://marc.info/?l=linux-rdma&m=138995755801039&w=2 Fix short to int cast for big endian systems. Signed-off-by: NUpinder Malhi <umalhi@cisco.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 14 2月, 2014 18 次提交
-
-
由 Christoffer Dall 提交于
This fixes the build breakage introduced by c07a0191 and adds support for the device control API and save/restore of the VGIC state for ARMv8. The defines were simply missing from the arm64 header files and uaccess.h must be implicitly imported from somewhere else on arm. Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Borislav Petkov 提交于
We're using edac_mc_workq_setup() both on the init path, when we load an edac driver and when we change the polling period (edac_mc_reset_delay_period) through /sys/.../edac_mc_poll_msec. On that second path we don't need to init the workqueue which has been initialized already. Thanks to Tejun for workqueue insights. Signed-off-by: NBorislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1391457913-881-1-git-send-email-prarit@redhat.com Cc: <stable@vger.kernel.org>
-
由 Borislav Petkov 提交于
Sanitize code even more to accept unsigned longs only and to not allow polling intervals below 1 second as this is unnecessary and doesn't make much sense anyway for polling errors. Signed-off-by: NBorislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1391457913-881-1-git-send-email-prarit@redhat.com Cc: Doug Thompson <dougthompson@xmission.com> Cc: <stable@vger.kernel.org>
-
由 Denis Carikli 提交于
Without that patch, a user can't select the imxfb driver when the i.MX25 and/or the i.MX27 device tree board are selected and that no boards that selects IMX_HAVE_PLATFORM_IMX_FB are compiled in. Cc: Eric Bénard <eric@eukrea.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-fbdev@vger.kernel.org Signed-off-by: NDenis Carikli <denis@eukrea.com> Acked-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Sachin Kamat 提交于
Enable S6E8AX0 LCD driver only if LCD_CLASS_DEVICE is a built-in driver. Else we get the following errors due to missing symbols: drivers/built-in.o: In function `s6e8ax0_probe': :(.text+0x51aec): undefined reference to `lcd_device_register' :(.text+0x51c44): undefined reference to `lcd_device_unregister' Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Eli Cohen 提交于
Remove Kconfig dependency of mlx5_ib/mlx5_core on X86, since there is no such dependency in reality. Signed-off-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Roland Dreier 提交于
On some architectures (for example, arm), we don't end up indirectly pulling in the declaration of kzalloc() and kfree(), and so building anything that includes <linux/mlx5/driver.h> breaks. Fix this by adding an explicit include to get the declaration. Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Doug Anderson 提交于
The ntc thermistor code was doing math whose temporary result might have overflowed 32-bits. We need some casts in there to make it safe. In one example I found: - pullup_uV: 1800000 - result of iio_read_channel_raw: 3226 - 1800000 * 3226 => 0x15a1cbc80 Signed-off-by: NDoug Anderson <dianders@chromium.org> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Mike Marciniszyn 提交于
Research has shown that commit a77fcf89 ("IB/qib: Use a single txselect module parameter for serdes tuning") missed a key serdes init sequence. This patch add that sequence. Cc: <stable@vger.kernel.org> Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Kumar Sanghvi 提交于
Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com> Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Moni Shoua 提交于
For userspace RoCE UD QPs we need to know the GID format that the kernel uses, e.g when working over older kernels. For that end, add a new port capability IB_PORT_IP_BASED_GIDS and report it when query port is issued. Signed-off-by: NMoni Shoua <monis@mellanox.co.il> Signed-off-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Moni Shoua 提交于
When scanning netdevices we need to check a few more conditions and cases to build the IBoE GID table properly. For example, under bonding we must make sure that when a port is down, the bond IP address isn't programmed as a GID, since doing so will cause failure with IB core flows that selects ports by GID. Signed-off-by: NMoni Shoua <monis@mellanox.co.il> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Moni Shoua 提交于
The IBoE code used to reset the GID table did it for all Ethernet ports of the device. Since the whole architecture of generating GIDs and responding to events is port-based, this is inefficient and can lead to wrong content in the GID table. Change the reset flow to be per-port. Signed-off-by: NMoni Shoua <monis@mellanox.co.il> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Moni Shoua 提交于
Updating the GID table under IBoE requires read/write from/to shared data structures. These data structures are protected with the device iboe lock. The flows that modify the GID table start from 1. Initializing the GID table 2. NETDEV events 3. INET or INET6 events This patch makes sure that the flow of initializing the GID table is consistent with the other two flows w.r.t on what step the lock is taken. Signed-off-by: NMoni Shoua <monis@mellanox.co.il> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Moni Shoua 提交于
On the one hand, the invocation of netdev_master_upper_dev_get() within mlx4_ib_scan_netdevs() must be done with rtnl lock held. On the other hand, it's wrong to call rtnl_lock() from within this function since it's also called by our netdev notifier callback. Therefore move the locking to mlx4_ib_add() so that both cases are covered. Signed-off-by: NMoni Shoua <monis@mellanox.co.il> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Moni Shoua 提交于
Make sure that for Ethernet ports, the port GID table index 0 is always occupied with a default GID of the relevant IPv6 link-local adderss. This provides better user experience for legacy applications that don't use the RDMA CM and were working on index 0 prior to the IP addressing change. Also, as GIDs are generated from IP addresses of the network devices that are associated with the port, it's basically possible that the GID table will be empty if no IP address was assigned. This doesn't comply with the IB spec section 4.1.1 "GID usage and properties". Signed-off-by: NMoni Shoua <monis@mellanox.co.il> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Matan Barak 提交于
When the device has only Ethernet ports, don't try to allocate range of steerable UD QPs since they aren't needed. This fixes an issue where mlx4 VFs tried to allocate a range of UD steerable QPs, but failed to do so. Fixes: c1c98501 ("IB/mlx4: Add support for steerable IB UD QPs") Signed-off-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 H. Peter Anvin 提交于
If CONFIG_X86_SMAP is disabled, smap_violation() tests for conditions which are incorrect (as the AC flag doesn't matter), causing spurious faults. The dynamic disabling of SMAP (nosmap on the command line) is fine because it disables X86_FEATURE_SMAP, therefore causing the static_cpu_has() to return false. Found by Fengguang Wu's test system. [ v3: move all predicates into smap_violation() ] [ v2: use IS_ENABLED() instead of #ifdef ] Reported-by: NFengguang Wu <fengguang.wu@intel.com> Link: http://lkml.kernel.org/r/20140213124550.GA30497@localhostSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org> # v3.7+
-
- 13 2月, 2014 5 次提交
-
-
由 H. Peter Anvin 提交于
If SMAP support is not compiled into the kernel, don't enable SMAP in CR4 -- in fact, we should clear it, because the kernel doesn't contain the proper STAC/CLAC instructions for SMAP support. Found by Fengguang Wu's test system. Reported-by: NFengguang Wu <fengguang.wu@intel.com> Link: http://lkml.kernel.org/r/20140213124550.GA30497@localhostSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org> # v3.7+
-
由 Steven Noonan 提交于
I started noticing problems with KVM guest destruction on Linux 3.12+, where guest memory wasn't being cleaned up. I bisected it down to the commit introducing the new 'asm goto'-based atomics, and found this quirk was later applied to those. Unfortunately, even with GCC 4.8.2 (which ostensibly fixed the known 'asm goto' bug) I am still getting some kind of miscompilation. If I enable the asm_volatile_goto quirk for my compiler, KVM guests are destroyed correctly and the memory is cleaned up. So make the quirk unconditional for now, until bug is found and fixed. Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NSteven Noonan <steven@uplinklabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jakub Jelinek <jakub@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/1392274867-15236-1-git-send-email-steven@uplinklabs.net Link: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Oleg Nesterov 提交于
Subsystems that want to register CPU hotplug callbacks, as well as perform initialization for the CPUs that are already online, often do it as shown below: get_online_cpus(); for_each_online_cpu(cpu) init_cpu(cpu); register_cpu_notifier(&foobar_cpu_notifier); put_online_cpus(); This is wrong, since it is prone to ABBA deadlocks involving the cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently with CPU hotplug operations). Interestingly, the raid5 code can actually prevent double initialization and hence can use the following simplified form of callback registration: register_cpu_notifier(&foobar_cpu_notifier); get_online_cpus(); for_each_online_cpu(cpu) init_cpu(cpu); put_online_cpus(); A hotplug operation that occurs between registering the notifier and calling get_online_cpus(), won't disrupt anything, because the code takes care to perform the memory allocations only once. So reorganize the code in raid5 this way to fix the deadlock with callback registration. Cc: linux-raid@vger.kernel.org Cc: stable@vger.kernel.org (v2.6.32+) Fixes: 36d1c647Signed-off-by: NOleg Nesterov <oleg@redhat.com> [Srivatsa: Fixed the unregister_cpu_notifier() deadlock, added the free_scratch_buffer() helper to condense code further and wrote the changelog.] Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 Rafael J. Wysocki 提交于
* pm-cpufreq: MAINTAINERS / cpufreq: update Sudeep's email address intel_pstate: Remove energy reporting from pstate_sample tracepoint
-
由 Sudeep Holla 提交于
Though my old email address continues to work as alias, updating to the new address as it's shorter, easier and more appropriate. Signed-off-by: NSudeep Holla <sudeep.holla@arm.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-