- 28 2月, 2009 40 次提交
-
-
由 Luis R. Rodriguez 提交于
Calling kobject_uevent_env() can fail mainly due to out of memory conditions. We do not want to continue during such conditions so propagate that as well instead of letting cfg80211 load as if everything is peachy. Additionally lets clarify that when CRDA is not called during cfg80211's initialization _and_ if the error is not an -ENOMEM its because kobject_uevent_env() failed to call CRDA, not because CRDA failed. For those who want to find out why we also let you do so by enabling the kernel config CONFIG_CFG80211_REG_DEBUG -- you'll get an actual stack trace. So for now we'll treat non -ENOMEM kobject_uevent_env() failures as non fatal during cfg80211's initialization. CC: Greg KH <greg@kroah.com> Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
This makes the core hint path more readable and allows for us to later make it obvious under what circumstances we need locking or not. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
If cfg80211 is built into the kernel there is perhaps a small time window betwen nl80211_init() and regulatory_init() where cfg80211_regdomain hasn't yet been initialized to let the wireless core do its work. During that rare case and time frame (if its even possible) we don't allow user regulatory changes as cfg80211 is working on enabling its first regulatory domain. To check for cfg80211_regdomain we now contend the entire operation using the cfg80211_mutex. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
cfg80211_drv_mutex is protecting more than the driver list, this renames it and documents what its currently supposed to protect. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
This will later be used by others, for now make use of it in cfg80211_drv_by_wiphy_idx() to return early if an invalid wiphy_idx has been provided. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
Makes it clearer to read when comparing to ifidx Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Alina Friedrichsen 提交于
This patch introduces a generic commit() function which initiate a new network joining process. It should be called after some interface config changes, so that the changes get applied more cleanly. Currently set_ssid() and set_bssid() call it. Others can be added in future patches. In version 1 the header files was forgotten, sorry. Signed-off-by: NAlina Friedrichsen <x-alina@gmx.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This patch converts code to use the new b43_radio_maskset() API. The semantic patch that makes this change is as follows: // <smpl> @@ expression dev, addr, mask, set; @@ -b43_radio_write16(dev, addr, (b43_radio_read16(dev, addr) & mask) | set); +b43_radio_maskset(dev, addr, mask, set); // </smpl> Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This patch converts code to use the new b43_radio_mask() API. The semantic patch that makes this change is as follows: // <smpl> @@ expression dev, addr, mask; @@ -b43_radio_write16(dev, addr, b43_radio_read16(dev, addr) & mask); +b43_radio_mask(dev, addr, mask); // </smpl> Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This patch converts code to use the new b43_radio_set() API. The semantic patch that makes this change is as follows: // <smpl> @@ expression dev, addr, set; @@ -b43_radio_write16(dev, addr, b43_radio_read16(dev, addr) | set); +b43_radio_set(dev, addr, set); // </smpl> Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This patch converts code to use the new b43_phy_maskset() API. The semantic patch that makes this change is as follows: // <smpl> @@ expression dev, addr, mask, set; @@ -b43_phy_write(dev, addr, (b43_phy_read(dev, addr) & mask) | set); +b43_phy_maskset(dev, addr, mask, set); // </smpl> Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This patch converts code to use the new b43_phy_mask() API. The semantic patch that makes this change is as follows: // <smpl> @@ expression dev, addr, mask; @@ -b43_phy_write(dev, addr, b43_phy_read(dev, addr) & mask); +b43_phy_mask(dev, addr, mask); // </smpl> Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This patch converts code to use the new b43_phy_set() API. The semantic patch that makes this change is as follows: // <smpl> @@ expression dev, addr, set; @@ -b43_phy_write(dev, addr, b43_phy_read(dev, addr) | set); +b43_phy_set(dev, addr, set); // </smpl> Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
The libertas SDIO interface scheduled the packet worker, resulting in unwanted latency for every data packet or command sent to the firmware. Fix a bug on the SDIO probe error path too. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This implements the new sw scan callbacks in b43. They are currently used to turn CFP update in the microcode off while scanning. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This adds optional notifier functions for software scan. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
Enable the PCI slow clock workaround, if we're running a PCI core rev <= 10. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
Do not turn off the crystal, if the boardflags tell us so. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This fixes initialization of some radio related hostflags. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This adds a compiletime assertion for a recently introduced assumption on the slot counts. The tx header cache handling code assumes that the TX slot count can be divided evenly by the number of TX slots per frame. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith 提交于
The short calibration interval is different for AP mode, fix this. Also, the timer should be rearmed in the calibration routine during scanning. Signed-off-by: NSujith <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith 提交于
pci_release_region() has to be called after the device has been disabled. Also remove a stray __init attribute. Signed-off-by: NSujith <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith 提交于
Using wrong chainmasks would have an adverse impact on performance. This patch fixes chainmask retrieval for non-PCIE cards. Signed-off-by: NSujith <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith 提交于
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith 提交于
OLC_FOR_AR9280_20_LATER is defined in multiple places, move it to a common location. Signed-off-by: NSujith <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Alina Friedrichsen 提交于
Reset automatically the TSF on re-enabling beaconing after scanning in IBSS mode causes several problems. For example a new created IBSS network can't age before an other node has joined, because scans are done automatically in that case. And several other strange bugs more... The TSF reset is done manually in the higher level mac80211 code in the cases were it's needed, so we don't need to do it here. Signed-off-by: NAlina Friedrichsen <x-alina@gmx.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
In the old days we used one slot per frame. But when we changed that to 2, we didn't raise the overall slot count. Which resulted in an effective division of two to the number of slots. Double the number of TX slots, so we have an effective hardware queue of 128 frames per QoS queue. Also optimize the TX header cache handling. We don't need a cached TX header for slots that will never carry an actual header. So we reduce the memory consumption of the cache by 50%. So as a net result we end up with more or less the same memory usage before and after this patch (except a few tiny meta structures), but have twice the number of TX slots available. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This fixes hidden bugs in the size handling of the DMA buffers. This sets the RX buffer size to the theoretical max packet size and fixes passing of the size values to the device (must not subtract the header offset). These bugs are hidden and don't actually trigger due to the magic +100 offset for the buffer size. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
Move the DMA stop sanity check up a few lines, so it's actually theoretically possible to trigger. (But it still shouldn't trigger, of course). Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
Passing beacons received from other BSS to s/w in non-scanning state is unnecessary in STA mode. This patch filters them out in h/w. Signed-off-by: NVasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Fenghua Yu 提交于
When iwlwifi runs on IOMMU, IOMMU generates a lot of PTE write faults because PTE write bit is not set on some of PTE's. This is because iwlwifi driver calls DMA mapping with PCI_DMA_TODEVICE which is read only in mapping PTE. But iwlwifi device actually writes to the mapped page to update its contents. This issue is not exposed in swiotlb. But VT-d hardware can capture this fault and stop the fault transaction. The iwl TX command contains a scratch field that is updated by uCode to indicate retry counts. For 5000 series the patch is required also for regular frames, but this patch does not differenciate. Signed-off-by: NFenghua Yu <fenghua.yu@intel.com> Acked-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Abhijeet Kolekar 提交于
Patch unifies use of SW rfkill between 3945 and agn driver. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: NSamuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Abhijeet Kolekar 提交于
iwl3945 uses iwl_isr and deletes duplicated iwl3945_isr. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: NSamuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Abhijeet Kolekar 提交于
Patch removes duplicate code to enable and disable interrupt. iwl3945 now uses iwlwifi's functions. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: NSamuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Abhijeet Kolekar 提交于
Patch removes duplicate code from iwl3945 and uses iwl_rx_reply_error and spectrum notifications from iwlwifi. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: NSamuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Abhijeet Kolekar 提交于
Patch removes duplicate rx handlers(pm_sleep and pm_debug) from 3945 and uses handlers from iwlwifi. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: NSamuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Abhijeet Kolekar 提交于
3945 can use iwl_mac_hw_scan callback instead of iwl3945_mac_hw_scan callback. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: NSamuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Abhijeet Kolekar 提交于
Patch makes use of iwl_rx_scan handler for 3945. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: NSamuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jason Andryuk 提交于
at76_debug should be an unsigned int as it used as a bit field. In fact, modprobe fails when trying to set at76_debug's high bit. Signed-off-by: NJason Andryuk <jandryuk@gmail.com> Signed-off-by: NKalle Valo <kalle.valo@iki.fi> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jason Andryuk 提交于
With the latest mac80211 stack, the driver needs to be updated for cfg80211 scanning. I based the changes off of modifications for at76_usb found here: http://johannes.sipsolutions.net/patches/old/all/2008-09-19-13:35/020-cfg80211-scan.patch The trick was that max_signal also needs to be set to avoid a divide by zero Oops. I just guessed and used the value 100 for now. kvalo: handpicked the change from two different patches Signed-off-by: NJason Andryuk <jandryuk@gmail.com> Signed-off-by: NKalle Valo <kalle.valo@iki.fi> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-