When multithreaded program execs under ptrace,
all traced threads report WIFEXITED status, except for
thread group leader and the thread which execs.

Unless tracer tracks thread group relationship between tracees,
which is a nontrivial task, it will not detect that
execed thread no longer exists.

This patch allows tracer to figure out which thread
performed this exec, by requesting PTRACE_GETEVENTMSG
in PTRACE_EVENT_EXEC stop.

Another, samller problem which is solved by this patch
is that tracer now can figure out which of the several
concurrent execs in multithreaded program succeeded.
Signed-off-by: NDenys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

Change de_thread() to set old_leader->exit_signal = -1. This is
good for the consistency, it is no longer the leader and all
sub-threads have exit_signal = -1 set by copy_process(CLONE_THREAD).

And this allows us to micro-optimize thread_group_leader(), it can
simply check exit_signal >= 0. This also makes sense because we
should move ->group_leader from task_struct to signal_struct.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: NTejun Heo <tj@kernel.org>

At this point, tracehooks aren't useful to mainline kernel and mostly
just add an extra layer of obfuscation.  Although they have comments,
without actual in-kernel users, it is difficult to tell what are their
assumptions and they're actually trying to achieve.  To mainline
kernel, they just aren't worth keeping around.

This patch kills the following clone and exec related tracehooks.

	tracehook_prepare_clone()
	tracehook_finish_clone()
	tracehook_report_clone()
	tracehook_report_clone_complete()
	tracehook_unsafe_exec()

The changes are mostly trivial - logic is moved to the caller and
comments are merged and adjusted appropriately.

The only exception is in check_unsafe_exec() where LSM_UNSAFE_PTRACE*
are OR'd to bprm->unsafe instead of setting it, which produces the
same result as the field is always zero on entry.  It also tests
p->ptrace instead of (p->ptrace & PT_PTRACED) for consistency, which
also gives the same result.

This doesn't introduce any behavior change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

At this point, tracehooks aren't useful to mainline kernel and mostly
just add an extra layer of obfuscation.  Although they have comments,
without actual in-kernel users, it is difficult to tell what are their
assumptions and they're actually trying to achieve.  To mainline
kernel, they just aren't worth keeping around.

This patch kills the following trivial tracehooks.

* Ones testing whether task is ptraced.  Replace with ->ptrace test.

	tracehook_expect_breakpoints()
	tracehook_consider_ignored_signal()
	tracehook_consider_fatal_signal()

* ptrace_event() wrappers.  Call directly.

	tracehook_report_exec()
	tracehook_report_exit()
	tracehook_report_vfork_done()

* ptrace_release_task() wrapper.  Call directly.

	tracehook_finish_release_task()

* noop

	tracehook_prepare_release_task()
	tracehook_report_death()

This doesn't introduce any behavior change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

JOBCTL_TRAPPING indicates that ptracer is waiting for tracee to
(re)transit into TRACED.  task_clear_jobctl_pending() must be called
when either tracee enters TRACED or the transition is cancelled for
some reason.  The former is achieved by explicitly calling
task_clear_jobctl_pending() in ptrace_stop() and the latter by calling
it at the end of do_signal_stop().

Calling task_clear_jobctl_trapping() at the end of do_signal_stop()
limits the scope TRAPPING can be used and is fragile in that seemingly
unrelated changes to tracee's control flow can lead to stuck TRAPPING.

We already have task_clear_jobctl_pending() calls on those cancelling
events to clear JOBCTL_STOP_PENDING.  Cancellations can be handled by
making those call sites use JOBCTL_PENDING_MASK instead and updating
task_clear_jobctl_pending() such that task_clear_jobctl_trapping() is
called automatically if no stop/trap is pending.

This patch makes the above changes and removes the fallback
task_clear_jobctl_trapping() call from do_signal_stop().
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

This patch introduces JOBCTL_PENDING_MASK and replaces
task_clear_jobctl_stop_pending() with task_clear_jobctl_pending()
which takes an extra @mask argument.

JOBCTL_PENDING_MASK is currently equal to JOBCTL_STOP_PENDING but
future patches will add more bits.  recalc_sigpending_tsk() is updated
to use JOBCTL_PENDING_MASK instead.

task_clear_jobctl_pending() takes @mask which in subset of
JOBCTL_PENDING_MASK and clears the relevant jobctl bits.  If
JOBCTL_STOP_PENDING is set, other STOP bits are cleared together.  All
task_clear_jobctl_stop_pending() users are updated to call
task_clear_jobctl_pending() with JOBCTL_STOP_PENDING which is
functionally identical to task_clear_jobctl_stop_pending().

This patch doesn't cause any functional change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

signal->group_stop currently hosts mostly group stop related flags;
however, it's gonna be used for wider purposes and the GROUP_STOP_
flag prefix becomes confusing.  Rename signal->group_stop to
signal->jobctl and rename all GROUP_STOP_* flags to JOBCTL_*.

Bit position macros JOBCTL_*_BIT are defined and JOBCTL_* flags are
defined in terms of them to allow using bitops later.

While at it, reassign JOBCTL_TRAPPING to bit 22 to better accomodate
future additions.

This doesn't cause any functional change.

-v2: JOBCTL_*_BIT macros added as suggested by Linus.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>

Now, exe_file is not proc FS dependent, so we can use it to name core
file.  So we add %E pattern for core file name cration which extract path
from mm_struct->exe_file.  Then it converts slashes to exclamation marks
and pastes the result to the core file name itself.

This is useful for environments where binary names are longer than 16
character (the current->comm limitation).  Also where there are binaries
with same name but in a different path.  Further in case the binery itself
changes its current->comm after exec.

So by doing (s/$/#/ -- # is treated as git comment):

  $ sysctl kernel.core_pattern='core.%p.%e.%E'
  $ ln /bin/cat cat45678901234567890
  $ ./cat45678901234567890
  ^Z
  $ rm cat45678901234567890
  $ fg
  ^\Quit (core dumped)
  $ ls core*

we now get:

  core.2434.cat456789012345.!root!cat45678901234567890 (deleted)
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Reviewed-by: NAndi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Setup and cleanup of mm_struct->exe_file is currently done in fs/proc/.
This was because exe_file was needed only for /proc/<pid>/exe.  Since we
will need the exe_file functionality also for core dumps (so core name can
contain full binary path), built this functionality always into the
kernel.

To achieve that move that out of proc FS to the kernel/ where in fact it
should belong.  By doing that we can make dup_mm_exe_file static.  Also we
can drop linux/proc_fs.h inclusion in fs/exec.c and kernel/fork.c.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Rework the existing mmu_gather infrastructure.

The direct purpose of these patches was to allow preemptible mmu_gather,
but even without that I think these patches provide an improvement to the
status quo.

The first 9 patches rework the mmu_gather infrastructure.  For review
purpose I've split them into generic and per-arch patches with the last of
those a generic cleanup.

The next patch provides generic RCU page-table freeing, and the followup
is a patch converting s390 to use this.  I've also got 4 patches from
DaveM lined up (not included in this series) that uses this to implement
gup_fast() for sparc64.

Then there is one patch that extends the generic mmu_gather batching.

After that follow the mm preemptibility patches, these make part of the mm
a lot more preemptible.  It converts i_mmap_lock and anon_vma->lock to
mutexes which together with the mmu_gather rework makes mmu_gather
preemptible as well.

Making i_mmap_lock a mutex also enables a clean-up of the truncate code.

This also allows for preemptible mmu_notifiers, something that XPMEM I
think wants.

Furthermore, it removes the new and universially detested unmap_mutex.

This patch:

Remove the first obstacle towards a fully preemptible mmu_gather.

The current scheme assumes mmu_gather is always done with preemption
disabled and uses per-cpu storage for the page batches.  Change this to
try and allocate a page for batching and in case of failure, use a small
on-stack array to make some progress.

Preemptible mmu_gather is desired in general and usable once i_mmap_lock
becomes a mutex.  Doing it before the mutex conversion saves us from
having to rework the code by moving the mmu_gather bits inside the
pte_lock.

Also avoid flushing the tlb batches from under the pte lock, this is
useful even without the i_mmap_lock conversion as it significantly reduces
pte lock hold times.

[akpm@linux-foundation.org: fix comment tpyo]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Tony Luck <tony.luck@intel.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NHugh Dickins <hughd@google.com>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently we have expand_upwards exported while expand_downwards is
accessible only via expand_stack or expand_stack_downwards.

check_stack_guard_page is a nice example of the asymmetry.  It uses
expand_stack for VM_GROWSDOWN while expand_upwards is called for
VM_GROWSUP case.

Let's clean this up by exporting both functions and make those names
consistent.  Let's use expand_{upwards,downwards} because expanding
doesn't always involve stack manipulation (an example is
ia64_do_page_fault which uses expand_upwards for registers backing store
expansion).  expand_downwards has to be defined for both
CONFIG_STACK_GROWS{UP,DOWN} because get_arg_page calls the downwards
version in the early process initialization phase for growsup
configuration.
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NHugh Dickins <hughd@google.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This allows drivers who call this function to be compiled modularly.
Otherwise, a driver who is interested in this type of functionality
has to implement their own get_task_comm() call, causing code
duplication in the Linux source tree.
Signed-off-by: NJ Freyensee <james_p_freyensee@linux.intel.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add the comment to explain acct_arg_size().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>

Add the appropriate members into struct user_arg_ptr and teach
get_user_arg_ptr() to handle is_compat = T case correctly.

This allows us to remove the compat_do_execve() code from fs/compat.c
and reimplement compat_do_execve() as the trivial wrapper on top of
do_execve_common(is_compat => true).

In fact, this fixes another (minor) bug. "compat_uptr_t str" can
overflow after "str += len" in compat_copy_strings() if a 64bit
application execs via sys32_execve().

Unexport acct_arg_size() and get_arg_page(), fs/compat.c doesn't
need them any longer.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Tested-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>

No functional changes, preparation.

Introduce struct user_arg_ptr, change do_execve() paths to use it
instead of "char __user * const __user *argv".

This makes the argv/envp arguments opaque, we are ready to handle the
compat case which needs argv pointing to compat_uptr_t.
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Tested-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>

Introduce get_user_arg_ptr() helper, convert count() and copy_strings()
to use it.

No functional changes, preparation. This helper is trivial, it just
reads the pointer from argv/envp user-space array.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Tested-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>

Currently task->signal->group_stop_count is used to decide whether to
stop for group stop.  However, if there is a task in the group which
is taking a long time to stop, other tasks which are continued by
ptrace would repeatedly stop for the same group stop until the group
stop is complete.

Conversely, if a ptraced task is in TASK_TRACED state, the debugger
won't get notified of group stops which is inconsistent compared to
the ptraced task in any other state.

This patch introduces GROUP_STOP_PENDING which tracks whether a task
is yet to stop for the group stop in progress.  The flag is set when a
group stop starts and cleared when the task stops the first time for
the group stop, and consulted whenever whether the task should
participate in a group stop needs to be determined.  Note that now
tasks in TASK_TRACED also participate in group stop.

This results in the following behavior changes.

* For a single group stop, a ptracer would see at most one stop
  reported.

* A ptracee in TASK_TRACED now also participates in group stop and the
  tracer would get the notification.  However, as a ptraced task could
  be in TASK_STOPPED state or any ptrace trap could consume group
  stop, the notification may still be missing.  These will be
  addressed with further patches.

* A ptracee may start a group stop while one is still in progress if
  the tracer let it continue with stop signal delivery.  Group stop
  code handles this correctly.

Oleg:

* Spotted that a task might skip signal check even when its
  GROUP_STOP_PENDING is set.  Fixed by updating
  recalc_sigpending_tsk() to check GROUP_STOP_PENDING instead of
  group_stop_count.

* Pointed out that task->group_stop should be cleared whenever
  task->signal->group_stop_count is cleared.  Fixed accordingly.

* Pointed out the behavior inconsistency between TASK_TRACED and
  RUNNING and the last behavior change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>

Hi,

I was backporting the coredump over pipe feature and noticed this small typo,
I wish I would have something bigger to contribute...

>From 15d6080e0ed4267da103c706917a33b1015e8804 Mon Sep 17 00:00:00 2001
From: Holger Hans Peter Freyther <holger@moiji-mobile.com>
Date: Thu, 24 Feb 2011 17:42:50 +0100
Subject: [PATCH] fs: Fix a small typo in the comment

The function is called umh_pipe_setup not uhm_pipe_setup.
Signed-off-by: NHolger Hans Peter Freyther <holger@moiji-mobile.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

take calculation of open_flags by open(2) arguments into new helper
in fs/open.c, move filp_open() over there, have it and do_sys_open()
use that helper, switch exec.c callers of do_filp_open() to explicit
(and constant) struct open_flags.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

FMODE_EXEC is a constant type of fmode_t but was used with normal integer
constants.  This results in following warnings from sparse.  Fix it using
new macro __FMODE_EXEC.

 fs/exec.c:116:58: warning: restricted fmode_t degrades to integer
 fs/exec.c:689:58: warning: restricted fmode_t degrades to integer
 fs/fcntl.c:777:9: warning: restricted fmode_t degrades to integer
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The install_special_mapping routine (used, for example, to setup the
vdso) skips the security check before insert_vm_struct, allowing a local
attacker to bypass the mmap_min_addr security restriction by limiting
the available pages for special mappings.

bprm_mm_init() also skips the check, and although I don't think this can
be used to bypass any restrictions, I don't see any reason not to have
the security check.

  $ uname -m
  x86_64
  $ cat /proc/sys/vm/mmap_min_addr
  65536
  $ cat install_special_mapping.s
  section .bss
      resb BSS_SIZE
  section .text
      global _start
      _start:
          mov     eax, __NR_pause
          int     0x80
  $ nasm -D__NR_pause=29 -DBSS_SIZE=0xfffed000 -f elf -o install_special_mapping.o install_special_mapping.s
  $ ld -m elf_i386 -Ttext=0x10000 -Tbss=0x11000 -o install_special_mapping install_special_mapping.o
  $ ./install_special_mapping &
  [1] 14303
  $ cat /proc/14303/maps
  0000f000-00010000 r-xp 00000000 00:00 0                                  [vdso]
  00010000-00011000 r-xp 00001000 00:19 2453665                            /home/taviso/install_special_mapping
  00011000-ffffe000 rwxp 00000000 00:00 0                                  [stack]

It's worth noting that Red Hat are shipping with mmap_min_addr set to
4096.
Signed-off-by: NTavis Ormandy <taviso@google.com>
Acked-by: NKees Cook <kees@ubuntu.com>
Acked-by: NRobert Swiecki <swiecki@google.com>
[ Changed to not drop the error code - akpm ]
Reviewed-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Note: this patch targets 2.6.37 and tries to be as simple as possible.
That is why it adds more copy-and-paste horror into fs/compat.c and
uglifies fs/exec.c, this will be cleanuped later.

compat_copy_strings() plays with bprm->vma/mm directly and thus has
two problems: it lacks the RLIMIT_STACK check and argv/envp memory
is not visible to oom killer.

Export acct_arg_size() and get_arg_page(), change compat_copy_strings()
to use get_arg_page(), change compat_do_execve() to do acct_arg_size(0)
as do_execve() does.

Add the fatal_signal_pending/cond_resched checks into compat_count() and
compat_copy_strings(), this matches the code in fs/exec.c and certainly
makes sense.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Brad Spengler published a local memory-allocation DoS that
evades the OOM-killer (though not the virtual memory RLIMIT):
http://www.grsecurity.net/~spender/64bit_dos.c

execve()->copy_strings() can allocate a lot of memory, but
this is not visible to oom-killer, nobody can see the nascent
bprm->mm and take it into account.

With this patch get_arg_page() increments current's MM_ANONPAGES
counter every time we allocate the new page for argv/envp. When
do_execve() succeds or fails, we change this counter back.

Technically this is not 100% correct, we can't know if the new
page is swapped out and turn MM_ANONPAGES into MM_SWAPENTS, but
I don't think this really matters and everything becomes correct
once exec changes ->mm or fails.
Reported-by: NBrad Spengler <spender@grsecurity.net>
Reviewed-and-discussed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Presently do_execve() turns PF_KTHREAD off before search_binary_handler().
 THis has a theorical risk of PF_KTHREAD getting lost.  We don't have to
turn PF_KTHREAD off in the ENOEXEC case.

This patch moves this flag modification to after the finding of the
executable file.

This is only a theorical issue because kthreads do not call do_execve()
directly.  But fixing would be better.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: NRoland McGrath <roland@redhat.com>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We met a parameter truncated issue, consider following:
> echo "|/root/core_pattern_pipe_test %p /usr/libexec/blah-blah-blah \
%s %c %p %u %g 11 12345678901234567890123456789012345678 %t" > \
/proc/sys/kernel/core_pattern

This is okay because the strings is less than CORENAME_MAX_SIZE.  "cat
/proc/sys/kernel/core_pattern" shows the whole string.  but after we run
core_pattern_pipe_test in man page, we found last parameter was truncated
like below:

        argc[10]=<12807486>

The root cause is core_pattern allows % specifiers, which need to be
replaced during parse time, but the replace may expand the strings to
larger than CORENAME_MAX_SIZE.  So if the last parameter is % specifiers,
the replace code is using snprintf(out_ptr, out_end - out_ptr, ...), this
will write out of corename array.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NXiaotian Feng <dfeng@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: NNeil Horman <nhorman@tuxdriver.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Oleg Nesterov pointed out we have to prevent multiple-threads-inside-exec
itself and we can reuse ->cred_guard_mutex for it.  Yes, concurrent
execve() has no worth.

Let's move ->cred_guard_mutex from task_struct to signal_struct.  It
naturally prevent multiple-threads-inside-exec.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NRoland McGrath <roland@redhat.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's pointless to kill a task if another thread sharing its mm cannot be
killed to allow future memory freeing.  A subsequent patch will prevent
kills in such cases, but first it's necessary to have a way to flag a task
that shares memory with an OOM_DISABLE task that doesn't incur an
additional tasklist scan, which would make select_bad_process() an O(n^2)
function.

This patch adds an atomic counter to struct mm_struct that follows how
many threads attached to it have an oom_score_adj of OOM_SCORE_ADJ_MIN.
They cannot be killed by the kernel, so their memory cannot be freed in
oom conditions.

This only requires task_lock() on the task that we're operating on, it
does not require mm->mmap_sem since task_lock() pins the mm and the
operation is atomic.

[rientjes@google.com: changelog and sys_unshare() code]
[rientjes@google.com: protect oom_disable_count with task_lock in fork]
[rientjes@google.com: use old_mm for oom_disable_count in exec]
Signed-off-by: NYing Han <yinghan@google.com>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If you build aout support as a module, you'll want these exported.
Reported-by: NTetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Tony Luck reports that the addition of the access_ok() check in commit
0eead9ab ("Don't dump task struct in a.out core-dumps") broke the
ia64 compile due to missing the necessary header file includes.

Rather than add yet another include (<asm/unistd.h>) to make everything
happy, just uninline the silly core dump helper functions and move the
bodies to fs/exec.c where they make a lot more sense.

dump_seek() in particular was too big to be an inline function anyway,
and none of them are in any way performance-critical.  And we really
don't need to mess up our include file headers more than they already
are.
Reported-and-tested-by: NTony Luck <tony.luck@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

An execve with a very large total of argument/environment strings
can take a really long time in the execve system call.  It runs
uninterruptibly to count and copy all the strings.  This change
makes it abort the exec quickly if sent a SIGKILL.

Note that this is the conservative change, to interrupt only for
SIGKILL, by using fatal_signal_pending().  It would be perfectly
correct semantics to let any signal interrupt the string-copying in
execve, i.e. use signal_pending() instead of fatal_signal_pending().
We'll save that change for later, since it could have user-visible
consequences, such as having a timer set too quickly make it so that
an execve can never complete, though it always happened to work before.
Signed-off-by: NRoland McGrath <roland@redhat.com>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This adds a preemption point during the copying of the argument and
environment strings for execve, in copy_strings().  There is already
a preemption point in the count() loop, so this doesn't add any new
points in the abstract sense.

When the total argument+environment strings are very large, the time
spent copying them can be much more than a normal user time slice.
So this change improves the interactivity of the rest of the system
when one process is doing an execve with very large arguments.
Signed-off-by: NRoland McGrath <roland@redhat.com>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The CONFIG_STACK_GROWSDOWN variant of setup_arg_pages() does not
check the size of the argument/environment area on the stack.
When it is unworkably large, shift_arg_pages() hits its BUG_ON.
This is exploitable with a very large RLIMIT_STACK limit, to
create a crash pretty easily.

Check that the initial stack is not too large to make it possible
to map in any executable.  We're not checking that the actual
executable (or intepreter, for binfmt_elf) will fit.  So those
mappings might clobber part of the initial stack mapping.  But
that is just userland lossage that userland made happen, not a
kernel problem.
Signed-off-by: NRoland McGrath <roland@redhat.com>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

fs: fs_struct rwlock to spinlock

struct fs_struct.lock is an rwlock with the read-side used to protect root and
pwd members while taking references to them. Taking a reference to a path
typically requires just 2 atomic ops, so the critical section is very small.
Parallel read-side operations would have cacheline contention on the lock, the
dentry, and the vfsmount cachelines, so the rwlock is unlikely to ever give a
real parallelism increase.

Replace it with a spinlock to avoid one or two atomic operations in typical
path lookup fastpath.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Make do_execve() take a const filename pointer so that kernel_execve() compiles
correctly on ARM:

arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type

This also requires the argv and envp arguments to be consted twice, once for
the pointer array and once for the strings the array points to.  This is
because do_execve() passes a pointer to the filename (now const) to
copy_strings_kernel().  A simpler alternative would be to cast the filename
pointer in do_execve() when it's passed to copy_strings_kernel().

do_execve() may not change any of the strings it is passed as part of the argv
or envp lists as they are some of them in .rodata, so marking these strings as
const should be fine.

Further kernel_execve() and sys_execve() need to be changed to match.

This has been test built on x86_64, frv, arm and mips.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-by: NRalf Baechle <ralf@linux-mips.org>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

fanotify, the upcoming notification system actually needs a struct path so it can
do opens in the context of listeners, and it needs a file so it can get f_flags
from the original process.  Close was the only operation that already was passing
a struct file to the notification hook.  This patch passes a file for access,
modify, and open as well as they are easily available to these hooks.
Signed-off-by: NEric Paris <eparis@redhat.com>

core_pattern is not actually protected and hasn't been
ever since we introduced procfs support for sysctl -- a
_long_ time. Don't take it here either.

Also nothing inside do_coredump appears to require bkl
protection.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
[ remove smp_lock.h headers ]
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Add the capacility to track data mmap()s. This can be used together
with PERF_SAMPLE_ADDR for data profiling.
Signed-off-by: NAnton Blanchard <anton@samba.org>
[Updated code for stable perf ABI]
Signed-off-by: NEric B Munson <ebmunson@us.ibm.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1274193049-25997-1-git-send-email-ebmunson@us.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

de_thread() and __exit_signal() use signal_struct->count/notify_count for
synchronization.  We can simplify the code and use ->notify_count only.
Instead of comparing these two counters, we can change de_thread() to set
->notify_count = nr_of_sub_threads, then change __exit_signal() to
dec-and-test this counter and notify group_exit_task.

Note that __exit_signal() checks "notify_count > 0" just for symmetry with
exit_notify(), we could just check it is != 0.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NRoland McGrath <roland@redhat.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- move the cprm.mm_flags checks up, before we take mmap_sem

- move down_write(mmap_sem) and ->core_state check from do_coredump()
  to coredump_wait()

This simplifies the code and makes the locking symmetrical.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Given that do_coredump() calls put_cred() on exit path, it is a bit ugly
to do put_cred() + "goto fail" twice, just add the new "fail_creds" label.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>