- 13 1月, 2016 3 次提交
-
-
由 Dave Jones 提交于
We call cleanup_one_si from ipmi_pci_remove, which calls ->addr_source_cleanup, which gets set to point to ipmi_pci_cleanup, which does a pci_disable_device. On return from this, we do a second pci_disable_device, which results in the trace below. ipmi_si 0000:00:16.0: disabling already-disabled device Call Trace: [<ffffffff818ce54c>] dump_stack+0x45/0x57 [<ffffffff810525f7>] warn_slowpath_common+0x97/0xe0 [<ffffffff810526f6>] warn_slowpath_fmt+0x46/0x50 [<ffffffff81497ca1>] pci_disable_device+0xb1/0xc0 [<ffffffffa00851a5>] ipmi_pci_remove+0x25/0x30 [ipmi_si] [<ffffffff8149a696>] pci_device_remove+0x46/0xc0 [<ffffffff8156801f>] __device_release_driver+0x7f/0xf0 [<ffffffff81568978>] driver_detach+0xb8/0xc0 [<ffffffff81567e50>] bus_remove_driver+0x50/0xa0 [<ffffffff8156914e>] driver_unregister+0x2e/0x60 [<ffffffff8149a3e5>] pci_unregister_driver+0x25/0x90 [<ffffffffa0085804>] cleanup_ipmi_si+0xd4/0xf0 [ipmi_si] [<ffffffff810c727a>] SyS_delete_module+0x12a/0x200 [<ffffffff818d4d72>] system_call_fastpath+0x12/0x17 Signed-off-by: NDave Jones <dsj@fb.com>
-
由 Krzysztof Kozlowski 提交于
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
-
由 LABBE Corentin 提交于
Lots of char arrays could be set as const since they contain only literal char arrays. We could in the same time make const some struct members who are pointer to those const char arrays. Signed-off-by: NLABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: NCorey Minyard <cminyard@mvista.com>
-
- 12 1月, 2016 29 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm由 Linus Torvalds 提交于
Pull device mapper updates from Mike Snitzer: - The most significant set of changes this cycle is the Forward Error Correction (FEC) support that has been added to the DM verity target. Google uses DM verity on all Android devices and it is believed that this FEC support will enable DM verity to recover from storage failures seen since DM verity was first deployed as part of Android. - A stable fix for a race in the destruction of DM thin pool's workqueue - A stable fix for hung IO if a DM snapshot copy hit an error - A few small cleanups in DM core and DM persistent data. - A couple DM thinp range discard improvements (address atomicity of finding a range and the efficiency of discarding a partially mapped thin device) - Add ability to debug DM bufio leaks by recording stack trace when a buffer is allocated. Upon detected leak the recorded stack is dumped. * tag 'dm-4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm snapshot: fix hung bios when copy error occurs dm thin: bump thin and thin-pool target versions dm thin: fix race condition when destroying thin pool workqueue dm space map metadata: remove unused variable in brb_pop() dm verity: add ignore_zero_blocks feature dm verity: add support for forward error correction dm verity: factor out verity_for_bv_block() dm verity: factor out structures and functions useful to separate object dm verity: move dm-verity.c to dm-verity-target.c dm verity: separate function for parsing opt args dm verity: clean up duplicate hashing code dm btree: factor out need_insert() helper dm bufio: use BUG_ON instead of conditional call to BUG dm bufio: store stacktrace in buffers to help find buffer leaks dm bufio: return NULL to improve code clarity dm block manager: cleanup code that prints stacktrace dm: don't save and restore bi_private dm thin metadata: make dm_thin_find_mapped_range() atomic dm thin metadata: speed up discard of partially mapped volumes
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull media updates from Mauro Carvalho Chehab: "The part of patches for Kernel 4.5. There's nothing really big here: - driver-specific headers for media devices were moved to separate directories, in order to make clear what headers belong to the core kABI and require documentation - Platform data for media drivers were moved from include/media to include/linux/platform_data/media - add a driver for cs3308 8-channel volume control, used on some high-end capture boards - lirc.h kAPI header were added at include/uapi/linux - Driver cleanups, new board additions and improvements" * tag 'media/v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (204 commits) [media] rc: sunxi-cir: Initialize the spinlock properly [media] rtl2832: do not filter out slave TS null packets [media] rtl2832: print reg number on error case [media] rtl28xxu: return demod reg page from driver cache [media] coda: enable MPEG-2 ES decoding [media] coda: don't start streaming without queued buffers [media] coda: hook up vidioc_prepare_buf [media] coda: relax coda_jpeg_check_buffer for trailing bytes [media] coda: make to_coda_video_device static [media] s5p-mfc: remove volatile attribute from MFC register addresses [media] s5p-mfc: merge together s5p_mfc_hw_call and s5p_mfc_hw_call_void [media] s5p-mfc: use spinlock to protect MFC context [media] s5p-mfc: remove unnecessary callbacks [media] s5p-mfc: make queue cleanup code common [media] s5p-mfc: use one implementation of s5p_mfc_get_new_ctx [media] s5p-mfc: constify s5p_mfc_codec_ops structures [media] au8522: Avoid memory leak for device config data [media] ir-lirc-codec.c: don't leak lirc->drv-rbuf [media] uvcvideo: small cleanup in uvc_video_clock_update() [media] uvcvideo: Fix reading the current exposure value of UVC ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds由 Linus Torvalds 提交于
Pull LED subsystem updates from Jacek Anaszewski: "Besides regular driver updates, we introduce a portion of LED core improvements, that allow to avoid the need for using work queues in the LED class drivers, that set brightness in a blocking way. Affected LED class drivers are being optimized accordingly. - LED core improvements: - use EXPORT_SYMBOL_GPL consistently, - add two new LED_BLINK_ flags, - rename brightness_set_sync op to brightness_set_blocking, - add led_set_brightness_nosleep{nopm} functions, - use set_brightness_work for the blocking op, - drivers shouldn't enforce SYNC/ASYNC brightness setting, - turn off the LED and wait for completion on unregistering LED class device, - add managed version of led_trigger_register, - add description of brightness setting API to the LED class doc. - Remove work queues from drivers: leds-tlc591xx, leds-88pm860x, leds-adp5520, leds-bd2802, leds-blinkm, leds-lm3533, leds-lm3642, leds-pca9532, leds-lp3944, leds-lp55xx, leds-lp8788, leds-lp8860, leds-pca955x, leds-pca963x, leds-wm831x, leds-da903x, leds-da9052, leds-dac124d085, leds-lt3593, leds-max8997, leds-mc13783, leds-regulator, leds-wm8350, leds-max77693, leds-aat1290, leds-ktd2692, leds-gpio, leds-pwm, leds-lm355x, leds-ns2. - Replace brightness_set op with a new brightness_set_blocking op to make the drivers compatible with led triggers: leds-ipaq-micro, leds-powernv. - Add missing of_node_put: leds-ktd2692, leds-aat1290, leds-max77693. - Make the driver explicitly non-modular: ledtrig-cpu, ledtrig-ide-disk, leds-syscon. - Improvements to leds-bcm6328: - reuse bcm6328_led_set() instead of copying its functionality, - swap LED ON and OFF definitions, - improve blink support, - simplify duplicated unlock in bcm6328_blink_set, - add little endian support, - remove unneded lock when checking initial LED status, - add HAS_IOMEM dependency, - code cleaning. - Improvements to leds-bcm6358: - use bcm6358_led_set() in order to get rid of the lock, - merge bcm6358_led_mode and bcm6358_led_set, - add little endian support, - remove unneded lock when checking initial LED status, - add HAS_IOMEM dependency, - remove unneeded busy status check. - Call led_pwm_set() in leds-pwm to enforce default LED_OFF. - Fix duration to be msec instead of jiffies: ledtrig-transient. - Removing NULL check: leds-powernv. - Use platform_register/unregister_drivers(): leds-sunfire. - Fix module license specification: ledtrig-oneshot. - Fix driver description and make license match the header: leds-pwm. - Remove checking for state < 1 in flash_strobe_store(): led-class-flash. - Use led_set_brightness_sync for torch brightness: v4l2-flash-led-class" * tag 'leds-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (68 commits) leds: add HAS_IOMEM dependency to LEDS_BCM6328/LEDS_BCM6358 leds: core: add managed version of led_trigger_register leds: bcm6358: remove unneeded busy status check leds: bcm6328: improve blink support leds: bcm6358: merge bcm6358_led_mode and bcm6358_led_set leds: bcm6328: simplify duplicated unlock in bcm6328_blink_set leds: bcm6358: add little endian support leds: bcm6328: add little endian support leds: bcm6358: remove unneded lock when checking initial LED status leds: bcm6358: Use bcm6358_led_set() in order to get rid of the lock leds: bcm6328: remove unneded lock when checking initial LED leds: bcm6328: code cleaning leds: syscon: Make the driver explicitly non-modular leds: ledtrig-ide-disk: Make the driver explicitly non-modular leds: ledtrig-cpu: Make the driver explicitly non-modular leds: sunfire: Use platform_register/unregister_drivers() leds: max77693: Add missing of_node_put leds: aat1290: Add missing of_node_put leds: powernv: Implement brightness_set_blocking op leds: ipaq-micro: Implement brightness_set_blocking op ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp由 Linus Torvalds 提交于
Pull EDAC updates from Borislav Petkov: - hide EDAC workqueue from users (Borislav Petkov) - edac_subsys init/teardown cleanup (Borislav Petkov) - make mpc85xx-pci-edac a platform device (Scott Wood) - sb_edac KNL gen2 support (Jim Snow) - other small cleanups all over the place * tag 'edac_for_4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, i5100: Use to_delayed_work() MAINTAINERS: Fix EDAC repo URLs format EDAC, sb_edac: Set fixed DIMM width on Xeon Knights Landing EDAC: Rework workqueue handling EDAC: Make edac_device workqueue setup/teardown functions static EDAC: Remove edac_get_sysfs_subsys() error handling EDAC: Unexport and make edac_subsys static EDAC: Rip out the edac_subsys reference counting EDAC: Robustify workqueues destruction EDAC, mc_sysfs: Fix freeing bus' name EDAC, mpc85xx: Make mpc85xx-pci-edac a platform device EDAC, sb_edac: Add Knights Landing (Xeon Phi gen 2) support EDAC, sb_edac: Add support for duplicate device IDs EDAC, sb_edac: Virtualize several hard-coded functions EDAC, mv64x60: Use platform_register/unregister_drivers() EDAC, mpc85xx: Use platform_register/unregister_drivers() EDAC: Add DDR4 flag EDAC: Remove references to bluesmoke.sourceforge.net EDAC, pci: Remove old disabled code
-
由 Linus Torvalds 提交于
Merge tag 'hwmon-for-linus-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "Notable hwmon changes: - Add basic support for NCT6683 on Mitac boards - Add support for AMD new 15h processors to fam15h_power driver - Add pmbus client driver for LTC3815 - Remove htu21 driver (now supported by iio subsystem)" * tag 'hwmon-for-linus-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (nct6683) Add basic support for NCT6683 on Mitac boards hwmon: (ibmaem) constify aem_rw_sensor_template and aem_ro_sensor_template structures hwmon: (nct6683,nct6775) constify sensor_template_group structures MAINTAINERS: change the maintainer of fam15h_power driver hwmon: (fam15h_power) Add support for AMD new 15h processors hwmon: (pmbus) Add client driver for LTC3815 hwmon: (htu21) Remove driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap由 Linus Torvalds 提交于
Pull regmap updates from Mark Brown: "There's no real overall theme to the regmap changes for this release, it's a collection of individual features. The main bits are: - Support for 64 bit registers, mainly for MMIO use, from Xiubo Li. - Support for trigger type configuration for regmap-irq from Laxman Dewangan. - Use native physical I/O for MMIO register maps to avoid confusion with the conversions that readl() and writel() do to little endian on big endian systems (with some DT updates to fix some workarounds people were doing), code from Simon Arlott. - Use a binary search rather than iteraton to improve the runtime performance of the rbtree code from Nikesh Oswal" * tag 'regmap-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: debugfs: Use seq_file for the access map regmap: irq: add support for configuration of trigger type regmap: use IS_ALIGNED instead of % to improve the performance regmap: cache: Move the num_reg_defaults check as early as possible regmap: cache: Add warning info for the cache check regmap: missing case statement regmap: shift wrapping bugs in 64 bit code regmap: cache: Add 64-bit mode support regmap: cache: To suppress the noise of checkpatch regmap: fix the warning about unused variable regmap: add 64-bit mode support regmap: mmio: Add regmap_mmio_get_min_stride regmap: mmio: remove the useless code regmap: Fix leftover from struct reg_default to struct reg_sequence change regmap: replace kmalloc with kmalloc_array regmap: replace kzalloc with kcalloc regmap: rbtree: When adding a reg do a bsearch for target node regmap-mmio: Use native endianness for read/write
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl由 Linus Torvalds 提交于
Pull pin control updates from Linus Walleij: "This is the bulk of pin control patches for the v4.5 series. Notably I have a patch to driver core from Stephen Boyd in the pull request, this has been ACKed by Greg so it should be OK. The internal API needed some tweaking to allow modular Qualcomm pin controllers. There is a bit of development history in here but it should all add up nicely and has boiled in linux-next. For example I merged in v4.4-rc5 to get rid of some nasty merge conflicts. Summary: - New drivers: - PXA2xx pin controller support - Broadcom NSP pin controller support - New subdrivers: - Samsung EXYNOS5410 support - Qualcomm MSM8996 support - Qualcomm PM8994 support - Qualcomm PM8994 MPP support - Allwinner sunxi H3 support - Allwinner sunxi A80 support - Rockchip RK3228 support - Rename the Cygnus pinctrl driver to "iproc" as it is more generic than was originally thought. - A bunch of Lantiq/Xway updates especially from the OpenWRT people. - Several refactorings for the Super-H SH PFC pin controllers. Adding SCIF_CLK support. - Several fixes to the Atlas 7 driver. - Various fixes all over the place" * tag 'pinctrl-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (91 commits) pinctrl: mediatek: Modify pinctrl bindings for mt2701 Revert "pinctrl: qcom: make PMIC drivers bool" pinctrl: qcom: Use platform_irq_count() instead of of_irq_count() driver-core: platform: Add platform_irq_count() pinctrl: lantiq: 2 pins have the wrong mux list pinctrl: qcom: make PMIC drivers bool pinctrl: nsp-gpio: forever loop in nsp_gpio_get_strength() pinctrl: mediatek: convert to arch_initcall pinctrl: bcm2835: Fix memory leak in error path pinctrl: mediatek: add missing of_node_put pinctrl: rockchip: add missing of_node_put pinctrl: sh-pfc: add missing of_node_put pinctrl: sirf: add missing of_node_put pinctrl-tegra: add missing of_node_put pinctrl: sunxi: Add A80 special pin controller pinctrl: bcm/cygnys/iproc: fixup rebase issue pinctrl: fixup problematic flag MAINTAINERS: Add co-maintainer for Renesas Pin Controllers pinctrl: sh-pfc: r8a7791: add EtherAVB pin groups pinctrl: sh-pfc: r8a7795: Add SATA support ...
-
git://git.linaro.org/people/ulf.hansson/mmc由 Linus Torvalds 提交于
Pull MMC updates from Ulf Hansson: "MMC core: - Optimize boot time by detecting cards simultaneously - Make runtime resume default behavior for MMC/SD - Enable MMC/SD/SDIO devices to suspend/resume asynchronously - Allow more than 8 partitions per card - Introduce MMC_CAP2_NO_SDIO to prevent unsupported SDIO commands - Support the standard DT wakeup-source property - Fix driver strength switching for HS200 and HS400 - Fix switch command timeout - Fix invalid vdd in voltage switch power cycle for SDIO MMC host: - sdhci: Restore behavior when setting VDD via external regulator - sdhci: A couple of changes/fixes related to the dma support - sdhci-tegra: Add Tegra210 support - sdhci-tegra: Support for UHS-I cards including tuning support - sdhci-of-at91: Add PM support - sh_mmcif: Rework dma channel handling - mvsdio: Delete platform data code path" * tag 'mmc-v4.5' of git://git.linaro.org/people/ulf.hansson/mmc: (52 commits) mmc: dw_mmc: remove the unused quirks mmc: sdhci-pci: use to_pci_dev() mmc: cb710: use to_platform_device() mmc: tegra: use correct accessor for misc ctrl register mmc: tegra: enable UHS-I modes mmc: tegra: implement UHS tuning mmc: tegra: disable SPI_MODE_CLKEN mmc: tegra: implement module external clock change mmc: sdhci: restore behavior when setting VDD via external regulator mmc: It is not an error for the card to be removed while suspended mmc: block: Allow more than 8 partitions per card mmc: core: Optimize boot time by detecting cards simultaneously mmc: dw_mmc: use resource_size_t to store physical address mmc: core: fix __mmc_switch timeout caused by preempt mmc: usdhi6rol0: handle NULL data in timeout mmc: of_mmc_spi: Add IRQF_ONESHOT to interrupt flags mmc: mediatek: change some dev_err to dev_dbg mmc: enable MMC/SD/SDIO device to suspend/resume asynchronously mmc: sdhci: Fix sdhci_runtime_pm_bus_on/off() mmc: sdhci: 64-bit DMA actually has 4-byte alignment ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata由 Linus Torvalds 提交于
Pull libata updates from Tejun Heo: "Mostly low level driver specific changes. Two changes are somewhat noteworthy. First, Dan's patchset to support per-port msix interrupt handling for ahci, which was tried last cycle but had to be backed out due to a couple issues, is back and seems to be working fine. Second, libata exception handling now uses usleep_range() instead of msleep() for sleeps < 20ms which can make things snappier in some corner cases" * 'for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: skip debounce delay on link resume ata: ahci_brcmstb: disable DIPM support ata: ahci_brcmstb: enable support for ALPM drivers: libata-core: Use usleep_range() instead of msleep() for short sleeps (<20 ms) sata_sx4: correctly handling failed allocation ata: ahci_brcmstb: add support for MIPS-based platforms ahci: qoriq: Adjust the default register values on ls1021a ahci: qoriq: Update the default Rx watermark value ahci: qoriq: Adjust the default register values on ls1043a ahci: compile out msi/msix infrastructure ata: core: fix irq description on AHCI single irq systems ata: ahci_brcmstb: remove unused definitions ata: ahci_brcmstb: add a quirk for MIPS-based platforms ata: ahci_brcmstb: disable NCQ for MIPS-based platforms ata: sata_rcar: Remove obsolete platform_device_id entries sata_rcar: Add compatible string for r8a7795 ahci: kill 'intr_status' ahci: switch from 'threaded' to 'hardirq' interrupt handling ahci: per-port msix support
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu由 Linus Torvalds 提交于
Pull percpu updates from Tejun Heo: "Two trivial percpu patches for v4.5-rc1" * 'for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: remove PERCPU_ENOUGH_ROOM which is stale definition percpu: Remove unneeded return from void function
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq由 Linus Torvalds 提交于
Pull workqueue update from Tejun Heo: "Workqueue changes for v4.5. One cleanup patch and three to improve the debuggability. Workqueue now has a stall detector which dumps workqueue state if any worker pool hasn't made forward progress over a certain amount of time (30s by default) and also triggers a warning if a workqueue which can be used in memory reclaim path tries to wait on something which can't be. These should make workqueue hangs a lot easier to debug." * 'for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: simplify the apply_workqueue_attrs_locked() workqueue: implement lockup detector watchdog: introduce touch_softlockup_watchdog_sched() workqueue: warn if memory reclaim tries to flush !WQ_MEM_RECLAIM workqueue
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq updates from Thomas Gleixner: "The irq department provides: - Support for MSI to wire bridges and a first user of it - More ACPI support for ARM/GIC - A new TS-4800 interrupt controller driver - RCU based free of interrupt descriptors to support the upcoming Intel VMD technology without introducing a locking nightmare - The usual pile of fixes and updates to drivers and core code" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits) irqchip/omap-intc: Add support for spurious irq handling irqchip/zevio: Use irq_data_get_chip_type() helper irqchip/omap-intc: Remove duplicate setup for IRQ chip type handler irqchip/ts4800: Add TS-4800 interrupt controller irqchip/ts4800: Add documentation for TS-4800 interrupt controller irq/platform-MSI: Increase the maximum MSIs the MSI framework can support irqchip/gicv2m: Miscellaneous fixes for v2m resources and SPI ranges irqchip/bcm2836: Make code more readable irqchip/bcm2836: Tolerate IRQs while no flag is set in ISR irqchip/bcm2836: Add SMP support for the 2836 irqchip/bcm2836: Fix initialization of the LOCAL_IRQ_CNT timers irqchip/gic-v2m: acpi: Introducing GICv2m ACPI support irqchip/gic-v2m: Refactor to prepare for ACPI support irqdomain: Introduce is_fwnode_irqchip helper acpi: pci: Setup MSI domain for ACPI based pci devices genirq/msi: Export functions to allow MSI domains in modules irqchip/mbigen: Implement the mbigen irq chip operation functions irqchip/mbigen: Create irq domain for each mbigen device irqchip/mgigen: Add platform device driver for mbigen device dt-bindings: Documents the mbigen bindings ...
-
由 Linus Torvalds 提交于
Merge branches 'timers-core-for-linus' and 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates - and a leftover fix - from Thomas Gleixner: "A rather large (commit wise) update from the timer side: - A bulk update to make compile tests work in the clocksource drivers - An overhaul of the h8300 timers - Some more Y2038 work - A few overflow prevention checks in the timekeeping/ntp code - The usual pile of fixes and improvements to the various clocksource/clockevent drivers and core code" Also: "A single fix for the posix-clock poll code which did not make it into 4.4" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (84 commits) clocksource/drivers/acpi_pm: Convert to pr_* macros clocksource: Make clocksource validation work for all clocksources timekeeping: Cap adjustments so they don't exceed the maxadj value ntp: Fix second_overflow's input parameter type to be 64bits ntp: Change time_reftime to time64_t and utilize 64bit __ktime_get_real_seconds timekeeping: Provide internal function __ktime_get_real_seconds clocksource/drivers/h8300: Use ioread / iowrite clocksource/drivers/h8300: Initializer cleanup. clocksource/drivers/h8300: Simplify delta handling clocksource/drivers/h8300: Fix timer not overflow case clocksource/drivers/h8300: Change to overflow interrupt clocksource/drivers/lpc32: Correct pr_err() output format clocksource/drivers/arm_global_timer: Fix suspend resume clocksource/drivers/pistachio: Fix wrong calculated clocksource read value clockevents/drivers/arm_global_timer: Use writel_relaxed in gt_compare_set clocksource/drivers/dw_apb_timer: Inline apbt_readl and apbt_writel clocksource/drivers/dw_apb_timer: Use {readl|writel}_relaxed in critical path clocksource/drivers/dw_apb_timer: Fix apbt_readl return types clocksource/drivers/tango-xtal: Replace code by clocksource_mmio_init clocksource/drivers/h8300: Increase the compilation test coverage ... * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-clock: Fix return code on the poll method's error path
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 platform updates from Ingo Molnar: "Two changes: - one to quirk-save/restore certain system MSRs across suspend/resume, to make certain Intel systems work better (Chen Yu) - and also to constify a read only structure (Julia Lawall)" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/platform/calgary: Constify cal_chipset_ops structures x86/pm: Introduce quirk framework to save/restore extra MSR registers around suspend/resume
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 mm updates from Ingo Molnar: "The main changes in this cycle were: - make the debugfs 'kernel_page_tables' file read-only, as it only has read ops. (Borislav Petkov) - micro-optimize clflush_cache_range() (Chris Wilson) - swiotlb enhancements, which fixes certain KVM emulated devices (Igor Mammedov) - fix an LDT related debug message (Jan Beulich) - modularize CONFIG_X86_PTDUMP (Kees Cook) - tone down an overly alarming warning (Laura Abbott) - Mark variable __initdata (Rasmus Villemoes) - PAT additions (Toshi Kani)" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Micro-optimise clflush_cache_range() x86/mm/pat: Change free_memtype() to support shrinking case x86/mm/pat: Add untrack_pfn_moved for mremap x86/mm: Drop WARN from multi-BAR check x86/LDT: Print the real LDT base address x86/mm/64: Enable SWIOTLB if system has SRAT memory regions above MAX_DMA32_PFN x86/mm: Introduce max_possible_pfn x86/mm/ptdump: Make (debugfs)/kernel_page_tables read-only x86/mm/mtrr: Mark the 'range_new' static variable in mtrr_calc_range_state() as __initdata x86/mm: Turn CONFIG_X86_PTDUMP into a module
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fpu updates from Ingo Molnar: "This cleans up the FPU fault handling methods to be more robust, and moves eligible variables to .init.data" * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu: Put a few variables in .init.data x86/fpu: Get rid of xstate_fault() x86/fpu: Add an XSTATE_OP() macro
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 cpu updates from Ingo Molnar: "The main changes in this cycle were: - Improved CPU ID handling code and related enhancements (Borislav Petkov) - RDRAND fix (Len Brown)" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Replace RDRAND forced-reseed with simple sanity check x86/MSR: Chop off lower 32-bit value x86/cpu: Fix MSR value truncation issue x86/cpu/amd, kvm: Satisfy guest kernel reads of IC_CFG MSR kvm: Add accessors for guest CPU's family, model, stepping x86/cpu: Unify CPU family, model, stepping calculation
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 cleanups from Ingo Molnar: "The main changes in this cycle were: - code patching and cpu_has cleanups (Borislav Petkov) - paravirt cleanups (Juergen Gross) - TSC cleanup (Thomas Gleixner) - ptrace cleanup (Chen Gang)" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: arch/x86/kernel/ptrace.c: Remove unused arg_offs_table x86/mm: Align macro defines x86/cpu: Provide a config option to disable static_cpu_has x86/cpufeature: Remove unused and seldomly used cpu_has_xx macros x86/cpufeature: Cleanup get_cpu_cap() x86/cpufeature: Move some of the scattered feature bits to x86_capability x86/paravirt: Remove paravirt ops pmd_update[_defer] and pte_update_defer x86/paravirt: Remove unused pv_apic_ops structure x86/tsc: Remove unused tsc_pre_init() hook x86: Remove unused function cpu_has_ht_siblings() x86/paravirt: Kill some unused patching functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull small x86 boot update from Ingo Molnar: "A single update to the MAINTAINERS file" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tboot: Update maintainer list for Intel TXT
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 asm updates from Ingo Molnar: "The main changes in this cycle were: - vDSO and asm entry improvements (Andy Lutomirski) - Xen paravirt entry enhancements (Boris Ostrovsky) - asm entry labels enhancement (Borislav Petkov) - and other misc changes (Thomas Gleixner, me)" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vsdo: Fix build on PARAVIRT_CLOCK=y, KVM_GUEST=n Revert "x86/kvm: On KVM re-enable (e.g. after suspend), update clocks" x86/entry/64_compat: Make labels local x86/platform/uv: Include clocksource.h for clocksource_touch_watchdog() x86/vdso: Enable vdso pvclock access on all vdso variants x86/vdso: Remove pvclock fixmap machinery x86/vdso: Get pvclock data from the vvar VMA instead of the fixmap x86, vdso, pvclock: Simplify and speed up the vdso pvclock reader x86/kvm: On KVM re-enable (e.g. after suspend), update clocks x86/entry/64: Bypass enter_from_user_mode on non-context-tracking boots x86/asm: Add asm macros for static keys/jump labels x86/asm: Error out if asm/jump_label.h is included inappropriately context_tracking: Switch to new static_branch API x86/entry, x86/paravirt: Remove the unused usergs_sysret32 PV op x86/paravirt: Remove the unused irq_enable_sysexit pv op x86/xen: Avoid fast syscall path for Xen PV guests
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 apic updates from Ingo Molnar: "The main changes in this cycle were: - introduce optimized single IPI sending methods on modern APICs (Linus Torvalds, Thomas Gleixner) - kexec/crash APIC handling fixes and enhancements (Hidehiro Kawai) - extend lapic vector saving/restoring to the CMCI (MCE) vector as well (Juergen Gross) - various fixes and enhancements (Jake Oshins, Len Brown)" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) x86/irq: Export functions to allow MSI domains in modules Documentation: Document kernel.panic_on_io_nmi sysctl x86/nmi: Save regs in crash dump on external NMI x86/apic: Introduce apic_extnmi command line parameter kexec: Fix race between panic() and crash_kexec() panic, x86: Allow CPUs to save registers even if looping in NMI context panic, x86: Fix re-entrance problem due to panic on NMI x86/apic: Fix the saving and restoring of lapic vectors during suspend/resume x86/smpboot: Re-enable init_udelay=0 by default on modern CPUs x86/smp: Remove single IPI wrapper x86/apic: Use default send single IPI wrapper x86/apic: Provide default send single IPI wrapper x86/apic: Implement single IPI for apic_noop x86/apic: Wire up single IPI for apic_numachip x86/apic: Wire up single IPI for x2apic_uv x86/apic: Implement single IPI for x2apic_phys x86/apic: Wire up single IPI for bigsmp_apic x86/apic: Remove pointless indirections from bigsmp_apic x86/apic: Wire up single IPI for apic_physflat x86/apic: Remove pointless indirections from apic_physflat ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler updates from Ingo Molnar: "The main changes in this cycle were: - tickless load average calculation enhancements (Byungchul Park) - vtime handling enhancements (Frederic Weisbecker) - scalability improvement via properly aligning a key structure field (Jiri Olsa) - various stop_machine() fixes (Oleg Nesterov) - sched/numa enhancement (Rik van Riel) - various fixes and improvements (Andi Kleen, Dietmar Eggemann, Geliang Tang, Hiroshi Shimamoto, Joonwoo Park, Peter Zijlstra, Waiman Long, Wanpeng Li, Yuyang Du)" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits) sched/fair: Fix new task's load avg removed from source CPU in wake_up_new_task() sched/core: Move sched_entity::avg into separate cache line x86/fpu: Properly align size in CHECK_MEMBER_AT_END_OF() macro sched/deadline: Fix the earliest_dl.next logic sched/fair: Disable the task group load_avg update for the root_task_group sched/fair: Move the cache-hot 'load_avg' variable into its own cacheline sched/fair: Avoid redundant idle_cpu() call in update_sg_lb_stats() sched/core: Move the sched_to_prio[] arrays out of line sched/cputime: Convert vtime_seqlock to seqcount sched/cputime: Introduce vtime accounting check for readers sched/cputime: Rename vtime_accounting_enabled() to vtime_accounting_cpu_enabled() sched/cputime: Correctly handle task guest time on housekeepers sched/cputime: Clarify vtime symbols and document them sched/cputime: Remove extra cost in task_cputime() sched/fair: Make it possible to account fair load avg consistently sched/fair: Modify the comment about lock assumptions in migrate_task_rq_fair() stop_machine: Clean up the usage of the preemption counter in cpu_stopper_thread() stop_machine: Shift the 'done != NULL' check from cpu_stop_signal_done() to callers stop_machine: Kill cpu_stop_done->executed stop_machine: Change __stop_cpus() to rely on cpu_stop_queue_work() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull RAS updates from Ingo Molnar: "Various x86 MCE fixes and small enhancements" * 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Make usable address checks Intel-only x86/mce: Add the missing memory error check on AMD x86/RAS: Remove mce.usable_addr x86/mce: Do not enter deferred errors into the generic pool twice
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf updates from Ingo Molnar: "Kernel side changes: - Intel Knights Landing support. (Harish Chegondi) - Intel Broadwell-EP uncore PMU support. (Kan Liang) - Core code improvements. (Peter Zijlstra.) - Event filter, LBR and PEBS fixes. (Stephane Eranian) - Enable cycles:pp on Intel Atom. (Stephane Eranian) - Add cycles:ppp support for Skylake. (Andi Kleen) - Various x86 NMI overhead optimizations. (Andi Kleen) - Intel PT enhancements. (Takao Indoh) - AMD cache events fix. (Vince Weaver) Tons of tooling changes: - Show random perf tool tips in the 'perf report' bottom line (Namhyung Kim) - perf report now defaults to --group if the perf.data file has grouped events, try it with: # perf record -e '{cycles,instructions}' -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.093 MB perf.data (1247 samples) ] # perf report # Samples: 1K of event 'anon group { cycles, instructions }' # Event count (approx.): 1955219195 # # Overhead Command Shared Object Symbol 2.86% 0.22% swapper [kernel.kallsyms] [k] intel_idle 1.05% 0.33% firefox libxul.so [.] js::SetObjectElement 1.05% 0.00% kworker/0:3 [kernel.kallsyms] [k] gen6_ring_get_seqno 0.88% 0.17% chrome chrome [.] 0x0000000000ee27ab 0.65% 0.86% firefox libxul.so [.] js::ValueToId<(js::AllowGC)1> 0.64% 0.23% JS Helper libxul.so [.] js::SplayTree<js::jit::LiveRange*, js::jit::LiveRange>::splay 0.62% 1.27% firefox libxul.so [.] js::GetIterator 0.61% 1.74% firefox libxul.so [.] js::NativeSetProperty 0.61% 0.31% firefox libxul.so [.] js::SetPropertyByDefining - Introduce the 'perf stat record/report' workflow: Generate perf.data files from 'perf stat', to tap into the scripting capabilities perf has instead of defining a 'perf stat' specific scripting support to calculate event ratios, etc. Simple example: $ perf stat record -e cycles usleep 1 Performance counter stats for 'usleep 1': 1,134,996 cycles 0.000670644 seconds time elapsed $ perf stat report Performance counter stats for '/home/acme/bin/perf stat record -e cycles usleep 1': 1,134,996 cycles 0.000670644 seconds time elapsed $ It generates PERF_RECORD_ userspace records to store the details: $ perf report -D | grep PERF_RECORD 0xf0 [0x28]: PERF_RECORD_THREAD_MAP nr: 1 thread: 27637 0x118 [0x12]: PERF_RECORD_CPU_MAP nr: 1 cpu: 65535 0x12a [0x40]: PERF_RECORD_STAT_CONFIG 0x16a [0x30]: PERF_RECORD_STAT -1 -1 0x19a [0x40]: PERF_RECORD_MMAP -1/0: [0xffffffff81000000(0x1f000000) @ 0xffffffff81000000]: x [kernel.kallsyms]_text 0x1da [0x18]: PERF_RECORD_STAT_ROUND [acme@ssdandy linux]$ An effort was made to make perf.data files generated like this to not generate cryptic messages when processed by older tools. The 'perf script' bits need rebasing, will go up later. - Make command line options always available, even when they depend on some feature being enabled, warning the user about use of such options (Wang Nan) - Support hw breakpoint events (mem:0xAddress) in the default output mode in 'perf script' (Wang Nan) - Fixes and improvements for supporting annotating ARM binaries, support ARM call and jump instructions, more work needed to have arch specific stuff separated into tools/perf/arch/*/annotate/ (Russell King) - Add initial 'perf config' command, for now just with a --list command to the contents of the configuration file in use and a basic man page describing its format, commands for doing edits and detailed documentation are being reviewed and proof-read. (Taeung Song) - Allows BPF scriptlets specify arguments to be fetched using DWARF info, using a prologue generated at compile/build time (He Kuang, Wang Nan) - Allow attaching BPF scriptlets to module symbols (Wang Nan) - Allow attaching BPF scriptlets to userspace code using uprobe (Wang Nan) - BPF programs now can specify 'perf probe' tunables via its section name, separating key=val values using semicolons (Wang Nan) Testing some of these new BPF features: Use case: get callchains when receiving SSL packets, filter then in the kernel, at arbitrary place. # cat ssl.bpf.c #define SEC(NAME) __attribute__((section(NAME), used)) struct pt_regs; SEC("func=__inet_lookup_established hnum") int func(struct pt_regs *ctx, int err, unsigned short port) { return err == 0 && port == 443; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; # # perf record -a -g -e ssl.bpf.c ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.787 MB perf.data (3 samples) ] # perf script | head -30 swapper 0 [000] 58783.268118: perf_bpf_probe:func: (ffffffff816a0f60) hnum=0x1bb 8a0f61 __inet_lookup_established (/lib/modules/4.3.0+/build/vmlinux) 896def ip_rcv_finish (/lib/modules/4.3.0+/build/vmlinux) 8976c2 ip_rcv (/lib/modules/4.3.0+/build/vmlinux) 855eba __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux) 8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux) 8572a8 process_backlog (/lib/modules/4.3.0+/build/vmlinux) 856b11 net_rx_action (/lib/modules/4.3.0+/build/vmlinux) 2a284b __do_softirq (/lib/modules/4.3.0+/build/vmlinux) 2a2ba3 irq_exit (/lib/modules/4.3.0+/build/vmlinux) 96b7a4 do_IRQ (/lib/modules/4.3.0+/build/vmlinux) 969807 ret_from_intr (/lib/modules/4.3.0+/build/vmlinux) 2dede5 cpu_startup_entry (/lib/modules/4.3.0+/build/vmlinux) 95d5bc rest_init (/lib/modules/4.3.0+/build/vmlinux) 1163ffa start_kernel ([kernel.vmlinux].init.text) 11634d7 x86_64_start_reservations ([kernel.vmlinux].init.text) 1163623 x86_64_start_kernel ([kernel.vmlinux].init.text) qemu-system-x86 9178 [003] 58785.792417: perf_bpf_probe:func: (ffffffff816a0f60) hnum=0x1bb 8a0f61 __inet_lookup_established (/lib/modules/4.3.0+/build/vmlinux) 896def ip_rcv_finish (/lib/modules/4.3.0+/build/vmlinux) 8976c2 ip_rcv (/lib/modules/4.3.0+/build/vmlinux) 855eba __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux) 8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux) 856660 netif_receive_skb_internal (/lib/modules/4.3.0+/build/vmlinux) 8566ec netif_receive_skb_sk (/lib/modules/4.3.0+/build/vmlinux) 430a br_handle_frame_finish ([bridge]) 48bc br_handle_frame ([bridge]) 855f44 __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux) 8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux) # - Use 'perf probe' various options to list functions, see what variables can be collected at any given point, experiment first collecting without a filter, then filter, use it together with 'perf trace', 'perf top', with or without callchains, if it explodes, please tell us! - Introduce a new callchain mode: "folded", that will list per line representations of all callchains for a give histogram entry, facilitating 'perf report' output processing by other tools, such as Brendan Gregg's flamegraph tools (Namhyung Kim) E.g: # perf report | grep -v ^# | head 18.37% 0.00% swapper [kernel.kallsyms] [k] cpu_startup_entry | ---cpu_startup_entry | |--12.07%--start_secondary | --6.30%--rest_init start_kernel x86_64_start_reservations x86_64_start_kernel # Becomes, in "folded" mode: # perf report -g folded | grep -v ^# | head -5 18.37% 0.00% swapper [kernel.kallsyms] [k] cpu_startup_entry 12.07% cpu_startup_entry;start_secondary 6.30% cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel 16.90% 0.00% swapper [kernel.kallsyms] [k] call_cpuidle 11.23% call_cpuidle;cpu_startup_entry;start_secondary 5.67% call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel 16.90% 0.00% swapper [kernel.kallsyms] [k] cpuidle_enter 11.23% cpuidle_enter;call_cpuidle;cpu_startup_entry;start_secondary 5.67% cpuidle_enter;call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel 15.12% 0.00% swapper [kernel.kallsyms] [k] cpuidle_enter_state # The user can also select one of "count", "period" or "percent" as the first column. ... and lots of infrastructure enhancements, plus fixes and other changes, features I failed to list - see the shortlog and the git log for details" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (271 commits) perf evlist: Add --trace-fields option to show trace fields perf record: Store data mmaps for dwarf unwind perf libdw: Check for mmaps also in MAP__VARIABLE tree perf unwind: Check for mmaps also in MAP__VARIABLE tree perf unwind: Use find_map function in access_dso_mem perf evlist: Remove perf_evlist__(enable|disable)_event functions perf evlist: Make perf_evlist__open() open evsels with their cpus and threads (like perf record does) perf report: Show random usage tip on the help line perf hists: Export a couple of hist functions perf diff: Use perf_hpp__register_sort_field interface perf tools: Add overhead/overhead_children keys defaults via string perf tools: Remove list entry from struct sort_entry perf tools: Include all tools/lib directory for tags/cscope/TAGS targets perf script: Align event name properly perf tools: Add missing headers in perf's MANIFEST perf tools: Do not show trace command if it's not compiled in perf report: Change default to use event group view perf top: Decay periods in callchains tools lib: Move bitmap.[ch] from tools/perf/ to tools/{lib,include}/ tools lib: Sync tools/lib/find_bit.c with the kernel ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull locking updates from Ingo Molnar: "So we have a laundry list of locking subsystem changes: - continuing barrier API and code improvements - futex enhancements - atomics API improvements - pvqspinlock enhancements: in particular lock stealing and adaptive spinning - qspinlock micro-enhancements" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op futex: Cleanup the goto confusion in requeue_pi() futex: Remove pointless put_pi_state calls in requeue() futex: Document pi_state refcounting in requeue code futex: Rename free_pi_state() to put_pi_state() futex: Drop refcount if requeue_pi() acquired the rtmutex locking/barriers, arch: Remove ambiguous statement in the smp_store_mb() documentation lcoking/barriers, arch: Use smp barriers in smp_store_release() locking/cmpxchg, arch: Remove tas() definitions locking/pvqspinlock: Queue node adaptive spinning locking/pvqspinlock: Allow limited lock stealing locking/pvqspinlock: Collect slowpath lock statistics sched/core, locking: Document Program-Order guarantees locking, sched: Introduce smp_cond_acquire() and use it locking/pvqspinlock, x86: Optimize the PV unlock code path locking/qspinlock: Avoid redundant read of next pointer locking/qspinlock: Prefetch the next node cacheline locking/qspinlock: Use _acquire/_release() versions of cmpxchg() & xchg() atomics: Add test for atomic operations with _relaxed variants
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull RCU updates from Ingo Molnar: "The changes in this cycle were: - Adding transitivity uniformly to rcu_node structure ->lock acquisitions. (This is implemented by the first two commits on top of v4.4-rc2 due to the pervasive nature of this change.) - Documentation updates, including RCU requirements. - Expedited grace-period changes. - Miscellaneous fixes. - Linked-list fixes, courtesy of KTSAN. - Torture-test updates. - Late-breaking fix to sysrq-generated crash. One thing I should note is that these pieces of documentation are fairly large files: .../RCU/Design/Requirements/Requirements.html | 2897 ++++++++++++++++++++ .../RCU/Design/Requirements/Requirements.htmlx | 2741 ++++++++++++++++++ and are written in HTML, not the usual .txt style. I hope they are fine" Paul McKenney explains the html docs: "For whatever it is worth, the reason for this unconventional choice was that attempts to do the diagrams in ASCII art failed miserably. And attempts to do ASCII art for the upcoming documentation of the data structures failed even more miserably" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits) sysrq: Fix warning in sysrq generated crash. list: Add lockless list traversal primitives rcu: Make rcu_gp_init() be bool rather than int rcu: Move wakeup out from under rnp->lock rcu: Fix comment for rcu_dereference_raw_notrace rcu: Don't redundantly disable irqs in rcu_irq_{enter,exit}() rcu: Make cpu_needs_another_gp() be bool rcu: Eliminate unused rcu_init_one() argument rcu: Remove TINY_RCU bloat from pointless boot parameters torture: Place console.log files correctly from the get-go torture: Abbreviate console error dump rcutorture: Print symbolic name for ->gp_state rcutorture: Print symbolic name for rcu_torture_writer_state rcutorture: Remove CONFIG_RCU_USER_QS from rcutorture selftest doc rcutorture: Default grace period to three minutes, allow override rcutorture: Dump stack when GP kthread stalls rcutorture: Flag nonexistent RCU GP kthread rcutorture: Add batch number to script printout Documentation/memory-barriers.txt: Fix ACCESS_ONCE thinko documentation: Update RCU requirements based on expedited changes ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs xattr updates from Al Viro: "Andreas' xattr cleanup series. It's a followup to his xattr work that went in last cycle; -0.5KLoC" * 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: xattr handlers: Simplify list operation ocfs2: Replace list xattr handler operations nfs: Move call to security_inode_listsecurity into nfs_listxattr xfs: Change how listxattr generates synthetic attributes tmpfs: listxattr should include POSIX ACL xattrs tmpfs: Use xattr handler infrastructure btrfs: Use xattr handler infrastructure vfs: Distinguish between full xattr names and proper prefixes posix acls: Remove duplicate xattr name definitions gfs2: Remove gfs2_xattr_acl_chmod vfs: Remove vfs_xattr_cmp
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs RCU symlink updates from Al Viro: "Replacement of ->follow_link/->put_link, allowing to stay in RCU mode even if the symlink is not an embedded one. No changes since the mailbomb on Jan 1" * 'work.symlinks' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: switch ->get_link() to delayed_call, kill ->put_link() kill free_page_put_link() teach nfs_get_link() to work in RCU mode teach proc_self_get_link()/proc_thread_self_get_link() to work in RCU mode teach shmem_get_link() to work in RCU mode teach page_get_link() to work in RCU mode replace ->follow_link() with new method that could stay in RCU mode don't put symlink bodies in pagecache into highmem namei: page_getlink() and page_follow_link_light() are the same thing ufs: get rid of ->setattr() for symlinks udf: don't duplicate page_symlink_inode_operations logfs: don't duplicate page_symlink_inode_operations switch befs long symlinks to page_symlink_operations
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs compat_ioctl fixes from Al Viro: "This is basically Jann's patches from last week. I have _not_ included the stuff like switching i2c to ->compat_ioctl() into this one - those need more testing. Ideally I would like fs/compat_ioctl.c shrunk a lot, but that's a separate story" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: compat_ioctl: don't call do_ioctl under set_fs(KERNEL_DS) compat_ioctl: don't pass fd around when not needed compat_ioctl: don't look up the fd twice
-
- 11 1月, 2016 2 次提交
-
-
由 Mauro Carvalho Chehab 提交于
* patchwork: (204 commits) [media] rc: sunxi-cir: Initialize the spinlock properly [media] rtl2832: do not filter out slave TS null packets [media] rtl2832: print reg number on error case [media] rtl28xxu: return demod reg page from driver cache [media] coda: enable MPEG-2 ES decoding [media] coda: don't start streaming without queued buffers [media] coda: hook up vidioc_prepare_buf [media] coda: relax coda_jpeg_check_buffer for trailing bytes [media] coda: make to_coda_video_device static [media] s5p-mfc: remove volatile attribute from MFC register addresses [media] s5p-mfc: merge together s5p_mfc_hw_call and s5p_mfc_hw_call_void [media] s5p-mfc: use spinlock to protect MFC context [media] s5p-mfc: remove unnecessary callbacks [media] s5p-mfc: make queue cleanup code common [media] s5p-mfc: use one implementation of s5p_mfc_get_new_ctx [media] s5p-mfc: constify s5p_mfc_codec_ops structures [media] au8522: Avoid memory leak for device config data [media] ir-lirc-codec.c: don't leak lirc->drv-rbuf [media] uvcvideo: small cleanup in uvc_video_clock_update() [media] uvcvideo: Fix reading the current exposure value of UVC ...
-
由 Linus Torvalds 提交于
-
- 10 1月, 2016 3 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fix from James Bottomley: "A single fix for machines with pages > 4k (PPC mostly). There's a bug in our optimal transfer size code where we don't account for pages > 4k and can set the transfer size to be less than the page size causing nasty failures" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: sd: Reject optimal transfer length smaller than page size
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI fixlet from Bjorn Helgaas: "This marks the TI DRA7xx host bridge driver as broken. Apparently it has never worked without some additional out-of-tree code, so I'm going to mark it broken now and remove it completely next cycle unless it's fixed" * tag 'pci-v4.4-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: dra7xx: Mark driver as broken
-
由 Ingo Molnar 提交于
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: New features: - Allow using trace events fields as sort order keys, making 'perf evlist --trace_fields' show those, and then the user can select a subset and use like: perf top -e sched:sched_switch -s prev_comm,next_comm That works as well in 'perf report' when handling files containing tracepoints. The default when just tracepoint events are found in a perf.data file is to format it like ftrace, using the libtraceevent formatters, plugins, etc (Namhyung Kim) - Add support in 'perf script' to process 'perf stat record' generated files, culminating in a python perf script that calculates CPI (Cycles per Instruction) (Jiri Olsa) - Show random perf tool tips in the 'perf report' bottom line (Namhyung Kim) - perf report now defaults to --group if the perf.data file has grouped events, try it with: # perf record -e '{cycles,instructions}' -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.093 MB perf.data (1247 samples) ] # perf report # Samples: 1K of event 'anon group { cycles, instructions }' # Event count (approx.): 1955219195 # # Overhead Command Shared Object Symbol 2.86% 0.22% swapper [kernel.kallsyms] [k] intel_idle 1.05% 0.33% firefox libxul.so [.] js::SetObjectElement 1.05% 0.00% kworker/0:3 [kernel.kallsyms] [k] gen6_ring_get_seqno 0.88% 0.17% chrome chrome [.] 0x0000000000ee27ab 0.65% 0.86% firefox libxul.so [.] js::ValueToId<(js::AllowGC)1> 0.64% 0.23% JS Helper libxul.so [.] js::SplayTree<js::jit::LiveRange*, js::jit::LiveRange>::splay 0.62% 1.27% firefox libxul.so [.] js::GetIterator 0.61% 1.74% firefox libxul.so [.] js::NativeSetProperty 0.61% 0.31% firefox libxul.so [.] js::SetPropertyByDefining User visible fixes: - Coect data mmaps so that the DWARF unwinder can handle usecases needing them, like softice (Jiri Olsa) - Decay callchains in fractal mode, fixing up cases where 'perf top -g' would show entries with more than 100% (Namhyung Kim) Infrastructure changes: - Sync tools/lib with the lib/ in the kernel sources for find_bit.c and move bitmap.[ch] from tools/perf/util/ to tools/lib/ (Arnaldo Carvalho de Melo) - No need to set attr.sample_freq in some 'perf test' entries that only want to deal with PERF_RECORD_ meta-events, improve a bit error output for CQM test (Arnaldo Carvalho de Melo) - Fix python binding build, adding some missing object files now required due to cpumap using find_bit stuff (Arnaldo Carvalho de Melo) - tools/build improvemnts (Jiri Olsa) - Add more files to cscope/ctags databases (Jiri Olsa) - Do not show 'trace' in 'perf help' if it is not compiled in (Jiri Olsa) - Make perf_evlist__open() open evsels with their cpus and threads, like perf record does, making them consistent (Adrian Hunter) - Fix pmu snapshot initialization bug (Stephane Eranian) - Add missing headers in perf's MANIFEST (Wang Nan) Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 09 1月, 2016 3 次提交
-
-
由 Guenter Roeck 提交于
Mitac microcode differs from Intel microcode. One key difference is that pwm values can be written. Detect vendor from customer ID field and no longer use DMI data to identify which microcode is running on the chip. Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Michal Hocko 提交于
kernel test robot has reported the following crash: BUG: unable to handle kernel NULL pointer dereference at 00000100 IP: [<c1074df6>] __queue_work+0x26/0x390 *pdpt = 0000000000000000 *pde = f000ff53f000ff53 *pde = f000ff53f000ff53 Oops: 0000 [#1] PREEMPT PREEMPT SMP SMP CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.4.0-rc4-00139-g373ccbe5 #1 Workqueue: events vmstat_shepherd task: cb684600 ti: cb7ba000 task.ti: cb7ba000 EIP: 0060:[<c1074df6>] EFLAGS: 00010046 CPU: 0 EIP is at __queue_work+0x26/0x390 EAX: 00000046 EBX: cbb37800 ECX: cbb37800 EDX: 00000000 ESI: 00000000 EDI: 00000000 EBP: cb7bbe68 ESP: cb7bbe38 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 CR0: 8005003b CR2: 00000100 CR3: 01fd5000 CR4: 000006b0 Stack: Call Trace: __queue_delayed_work+0xa1/0x160 queue_delayed_work_on+0x36/0x60 vmstat_shepherd+0xad/0xf0 process_one_work+0x1aa/0x4c0 worker_thread+0x41/0x440 kthread+0xb0/0xd0 ret_from_kernel_thread+0x21/0x40 The reason is that start_shepherd_timer schedules the shepherd work item which uses vmstat_wq (vmstat_shepherd) before setup_vmstat allocates that workqueue so if the further initialization takes more than HZ we might end up scheduling on a NULL vmstat_wq. This is really unlikely but not impossible. Fixes: 373ccbe5 ("mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress") Reported-by: Nkernel test robot <ying.huang@linux.intel.com> Signed-off-by: NMichal Hocko <mhocko@suse.com> Tested-by: NTetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jann Horn 提交于
This replaces all code in fs/compat_ioctl.c that translated ioctl arguments into a in-kernel structure, then performed do_ioctl under set_fs(KERNEL_DS), with code that allocates data on the user stack and can call the VFS ioctl handler under USER_DS. This is done as a hardening measure because the caller does not know what kind of ioctl handler will be invoked, only that no corresponding compat_ioctl handler exists and what the ioctl command number is. The accidental invocation of an unlocked_ioctl handler that unexpectedly calls copy_to_user could be a severe security issue. Signed-off-by: NJann Horn <jann@thejh.net> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-