- 04 7月, 2015 1 次提交
-
-
由 Ingo Molnar 提交于
Jan Kara and Thomas Gleixner reported boot crashes in the FPU code: general protection fault: 0000 [#1] SMP RIP: 0010:[<ffffffff81048a6c>] [<ffffffff81048a6c>] mxcsr_feature_mask_init+0x1c/0x40 2b:* 0f ae 85 00 fe ff ff fxsave -0x200(%rbp) and bisected it down to the following FPU commit: 91a8c2a5 ("x86/fpu: Clean up and fix MXCSR handling") The reason is that the on-stack FPU registers state variable, used by the FXSAVE instruction, did not have the required minimum alignment of 16 bytes, causing the general protection fault. This is most likely a GCC bug in older GCC versions, but the offending commit also added a bogus extra 32-byte alignment (which GCC ignored too). So fix this bug by making the variable static again, but also mark it __initdata this time, because fpu__init_system_mxcsr() is now an __init function. Reported-and-bisected-by: NJan Kara <jack@suse.cz> Reported-bisected-and-tested-by: NThomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Kara <jack@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150704075819.GA9201@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 02 7月, 2015 1 次提交
-
-
由 James C Boyd 提交于
The paths mentioned in this file weren't updated through some file rename commits. Fix them to refer to the correct path. Signed-off-by: NJames C Boyd <jcboyd.dev@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: corbet@lwn.net Cc: trivial@kernel.org Link: http://lkml.kernel.org/r/1435781606-3037-1-git-send-email-jcboyd.dev@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 30 6月, 2015 2 次提交
-
-
由 Ingo Molnar 提交于
Merge branch that got ready. Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
Mike Galbraith reported: " My i7-4790 box is having one hell of a time with this merge window, dead in the water. BIOS setting "Limit CPUID Maximum" upsets new fpu code mightily. " It turns out that Linux does a double workaround here, as per: 066941bd ("x86: unmask CPUID levels on Intel CPUs") it undoes the BIOS workaround - but as a side effect the CPUID state is not completely constant during early init anymore, and the new FPU init code did not take this into account. So what happened is that the xstate init code did not have full CPUID available, which broke subsequent attempts to use xstate features. Fix this by ordering the early FPU init code to after we've stabilized the CPUID state. Reported-bisected-and-tested-by: NMike Galbraith <umgwanakikbuti@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150627082514.GA10894@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 23 6月, 2015 18 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq updates from Thomas Gleixner: "The irq departement delivers: - plug a potential race related to chained interrupt handlers - core updates which address the needs of the x86 irqdomain conversion - new irqchip callback to support affinity settings for VCPUs - the usual pile of updates to interrupt chip drivers - a few helper functions to allow further cleanups and simplifications I have a largish pile of coccinelle scripted/verified cleanups and simplifications pending on top of that, but I prefer to send that towards the end of the merge window when the arch/driver changes have hit your tree to avoid API change wreckage as far as possible" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits) genirq: Remove bogus restriction in irq_move_mask_irq() irqchip: atmel-aic5: Add sama5d2 support irq: spear-shirq: Fix race in installing chained IRQ handler irq: irq-keystone: Fix race in installing chained IRQ handler gpio: gpio-tegra: Fix race in installing chained IRQ handler gpio: gpio-mxs: Fix race in installing chained IRQ handler gpio: gpio-mxc: Fix race in installing chained IRQ handler ARM: gemini: Fix race in installing GPIO chained IRQ handler GPU: ipu: Fix race in installing IPU chained IRQ handler ARM: sa1100: convert SA11x0 related code to use new chained handler helper irq: Add irq_set_chained_handler_and_data() irqchip: exynos-combiner: Save IRQ enable set on suspend genirq: Introduce helper function irq_data_get_affinity_mask() genirq: Introduce helper function irq_data_get_node() genirq: Introduce struct irq_common_data to host shared irq data genirq: Prevent crash in irq_move_irq() genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain irqchip: gic: Simplify gic_configure_irq by using IRQCHIP_SET_TYPE_MASKED irqchip: renesas: intc-irqpin: Improve binding documentation genirq: Set IRQCHIP_SKIP_SET_WAKE for no_irq_chip ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull NOHZ updates from Thomas Gleixner: "A few updates to the nohz infrastructure: - recursion protection for context tracking - make the TIF_NOHZ inheritance smarter - isolate cpus which belong to the NOHZ full set" * 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: nohz: Set isolcpus when nohz_full is set nohz: Add tick_nohz_full_add_cpus_to() API context_tracking: Inherit TIF_NOHZ through forks instead of context switches context_tracking: Protect against recursion
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer updates from Thomas Gleixner: "A rather largish update for everything time and timer related: - Cache footprint optimizations for both hrtimers and timer wheel - Lower the NOHZ impact on systems which have NOHZ or timer migration disabled at runtime. - Optimize run time overhead of hrtimer interrupt by making the clock offset updates smarter - hrtimer cleanups and removal of restrictions to tackle some problems in sched/perf - Some more leap second tweaks - Another round of changes addressing the 2038 problem - First step to change the internals of clock event devices by introducing the necessary infrastructure - Allow constant folding for usecs/msecs_to_jiffies() - The usual pile of clockevent/clocksource driver updates The hrtimer changes contain updates to sched, perf and x86 as they depend on them plus changes all over the tree to cleanup API changes and redundant code, which got copied all over the place. The y2038 changes touch s390 to remove the last non 2038 safe code related to boot/persistant clock" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits) clocksource: Increase dependencies of timer-stm32 to limit build wreckage timer: Minimize nohz off overhead timer: Reduce timer migration overhead if disabled timer: Stats: Simplify the flags handling timer: Replace timer base by a cpu index timer: Use hlist for the timer wheel hash buckets timer: Remove FIFO "guarantee" timers: Sanitize catchup_timer_jiffies() usage hrtimer: Allow hrtimer::function() to free the timer seqcount: Introduce raw_write_seqcount_barrier() seqcount: Rename write_seqcount_barrier() hrtimer: Fix hrtimer_is_queued() hole hrtimer: Remove HRTIMER_STATE_MIGRATE selftest: Timers: Avoid signal deadlock in leap-a-day timekeeping: Copy the shadow-timekeeper over the real timekeeper last clockevents: Check state instead of mode in suspend/resume path selftests: timers: Add leap-second timer edge testing to leap-a-day.c ntp: Do leapsecond adjustment in adjtimex read path time: Prevent early expiry of hrtimers[CLOCK_REALTIME] at the leap second edge ntp: Introduce and use SECS_PER_DAY macro instead of 86400 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 core updates from Ingo Molnar: "There were so many changes in the x86/asm, x86/apic and x86/mm topics in this cycle that the topical separation of -tip broke down somewhat - so the result is a more traditional architecture pull request, collected into the 'x86/core' topic. The topics were still maintained separately as far as possible, so bisectability and conceptual separation should still be pretty good - but there were a handful of merge points to avoid excessive dependencies (and conflicts) that would have been poorly tested in the end. The next cycle will hopefully be much more quiet (or at least will have fewer dependencies). The main changes in this cycle were: * x86/apic changes, with related IRQ core changes: (Jiang Liu, Thomas Gleixner) - This is the second and most intrusive part of changes to the x86 interrupt handling - full conversion to hierarchical interrupt domains: [IOAPIC domain] ----- | [MSI domain] --------[Remapping domain] ----- [ Vector domain ] | (optional) | [HPET MSI domain] ----- | | [DMAR domain] ----------------------------- | [Legacy domain] ----------------------------- This now reflects the actual hardware and allowed us to distangle the domain specific code from the underlying parent domain, which can be optional in the case of interrupt remapping. It's a clear separation of functionality and removes quite some duct tape constructs which plugged the remap code between ioapic/msi/hpet and the vector management. - Intel IOMMU IRQ remapping enhancements, to allow direct interrupt injection into guests (Feng Wu) * x86/asm changes: - Tons of cleanups and small speedups, micro-optimizations. This is in preparation to move a good chunk of the low level entry code from assembly to C code (Denys Vlasenko, Andy Lutomirski, Brian Gerst) - Moved all system entry related code to a new home under arch/x86/entry/ (Ingo Molnar) - Removal of the fragile and ugly CFI dwarf debuginfo annotations. Conversion to C will reintroduce many of them - but meanwhile they are only getting in the way, and the upstream kernel does not rely on them (Ingo Molnar) - NOP handling refinements. (Borislav Petkov) * x86/mm changes: - Big PAT and MTRR rework: making the code more robust and preparing to phase out exposing direct MTRR interfaces to drivers - in favor of using PAT driven interfaces (Toshi Kani, Luis R Rodriguez, Borislav Petkov) - New ioremap_wt()/set_memory_wt() interfaces to support Write-Through cached memory mappings. This is especially important for good performance on NVDIMM hardware (Toshi Kani) * x86/ras changes: - Add support for deferred errors on AMD (Aravind Gopalakrishnan) This is an important RAS feature which adds hardware support for poisoned data. That means roughly that the hardware marks data which it has detected as corrupted but wasn't able to correct, as poisoned data and raises an APIC interrupt to signal that in the form of a deferred error. It is the OS's responsibility then to take proper recovery action and thus prolonge system lifetime as far as possible. - Add support for Intel "Local MCE"s: upcoming CPUs will support CPU-local MCE interrupts, as opposed to the traditional system- wide broadcasted MCE interrupts (Ashok Raj) - Misc cleanups (Borislav Petkov) * x86/platform changes: - Intel Atom SoC updates ... and lots of other cleanups, fixlets and other changes - see the shortlog and the Git log for details" * 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (222 commits) x86/hpet: Use proper hpet device number for MSI allocation x86/hpet: Check for irq==0 when allocating hpet MSI interrupts x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabled x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled x86/platform/intel/baytrail: Add comments about why we disabled HPET on Baytrail genirq: Prevent crash in irq_move_irq() genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain iommu, x86: Properly handle posted interrupts for IOMMU hotplug iommu, x86: Provide irq_remapping_cap() interface iommu, x86: Setup Posted-Interrupts capability for Intel iommu iommu, x86: Add cap_pi_support() to detect VT-d PI capability iommu, x86: Avoid migrating VT-d posted interrupts iommu, x86: Save the mode (posted or remapped) of an IRTE iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip iommu: dmar: Provide helper to copy shared irte fields iommu: dmar: Extend struct irte for VT-d Posted-Interrupts iommu: Add new member capability to struct irq_remap_ops x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode code x86/asm/entry/32: Shorten __audit_syscall_entry() args preparation x86/asm/entry/32: Explain reloading of registers after __audit_syscall_entry() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 warning fixlet from Ingo Molnar: "A build fix for certain (rare) variants of binutils that did not make it into v4.1" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Fix overflow warning with 32-bit binutils
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pul x86 microcode updates from Ingo Molnar: "x86 microcode loader updates from Borislav Petkov: - early parsing of the built-in microcode - cleanups - misc smaller fixes" * 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode: Correct CPU family related variable types x86/microcode: Disable builtin microcode loading on 32-bit for now x86/microcode/intel: Rename get_matching_sig() x86/microcode/intel: Simplify get_matching_sig() x86/microcode/intel: Simplify update_match_cpu() x86/microcode/intel: Rename get_matching_microcode x86/cpu/microcode: Zap changelog x86/microcode: Parse built-in microcode early x86/microcode/intel: Remove unused @rev arg of get_matching_sig() x86/microcode/intel: Get rid of revision_is_newer()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 kdump updates from Ingo Molnar: "Three kdump robustness related improvements (Joerg Roedel)" * 'x86-kdump-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/crash: Allocate enough low memory when crashkernel=high x86/swiotlb: Try coherent allocations with __GFP_NOWARN swiotlb: Warn on allocation failure in swiotlb_alloc_coherent()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 FPU updates from Ingo Molnar: "This tree contains two main changes: - The big FPU code rewrite: wide reaching cleanups and reorganization that pulls all the FPU code together into a clean base in arch/x86/fpu/. The resulting code is leaner and faster, and much easier to understand. This enables future work to further simplify the FPU code (such as removing lazy FPU restores). By its nature these changes have a substantial regression risk: FPU code related bugs are long lived, because races are often subtle and bugs mask as user-space failures that are difficult to track back to kernel side backs. I'm aware of no unfixed (or even suspected) FPU related regression so far. - MPX support rework/fixes. As this is still not a released CPU feature, there were some buglets in the code - should be much more robust now (Dave Hansen)" * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (250 commits) x86/fpu: Fix double-increment in setup_xstate_features() x86/mpx: Allow 32-bit binaries on 64-bit kernels again x86/mpx: Do not count MPX VMAs as neighbors when unmapping x86/mpx: Rewrite the unmap code x86/mpx: Support 32-bit binaries on 64-bit kernels x86/mpx: Use 32-bit-only cmpxchg() for 32-bit apps x86/mpx: Introduce new 'directory entry' to 'addr' helper function x86/mpx: Add temporary variable to reduce masking x86: Make is_64bit_mm() widely available x86/mpx: Trace allocation of new bounds tables x86/mpx: Trace the attempts to find bounds tables x86/mpx: Trace entry to bounds exception paths x86/mpx: Trace #BR exceptions x86/mpx: Introduce a boot-time disable flag x86/mpx: Restrict the mmap() size check to bounds tables x86/mpx: Remove redundant MPX_BNDCFG_ADDR_MASK x86/mpx: Clean up the code by not passing a task pointer around when unnecessary x86/mpx: Use the new get_xsave_field_ptr()API x86/fpu/xstate: Wrap get_xsave_addr() to make it safer x86/fpu/xstate: Fix up bad get_xsave_addr() assumptions ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 EFI updates from Ingo Molnar: "EFI changes: - Use idiomatic negative error values in efivar_create_sysfs_entry() instead of returning '1' to indicate error (Dan Carpenter) - Implement new support to expose the EFI System Resource Tables in sysfs, which provides information for performing firmware updates (Peter Jones) - Documentation cleanup in the EFI handover protocol section which falsely claimed that 'cmdline_size' needed to be filled out by the boot loader (Alex Smith) - Align the order of SMBIOS tables in /sys/firmware/efi/systab to match the way that we do things for ACPI and add documentation to Documentation/ABI (Jean Delvare)" * 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: Work around ia64 build problem with ESRT driver efi: Add 'systab' information to Documentation/ABI efi: dmi: List SMBIOS3 table before SMBIOS table efi/esrt: Fix some compiler warnings x86, doc: Remove cmdline_size from list of fields to be filled in for EFI handover efi: Add esrt support efi: efivar_create_sysfs_entry() should return negative error codes
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 debugging documentation updates from Ingo Molnar: "Documentation updates about x86 kernel stacks" * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/Documentation: Adapt Ingo's explanation on printing backtraces x86/Documentation: Remove STACKFAULT_STACK bulletpoint x86/Documentation: Move kernel-stacks doc one level up
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 CPU features from Ingo Molnar: "Various CPU feature support related changes: in particular the /proc/cpuinfo model name sanitization change should be monitored, it has a chance to break stuff. (but really shouldn't and there are no regression reports)" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu/amd: Give access to the number of nodes in a physical package x86/cpu: Trim model ID whitespace x86/cpu: Strip any /proc/cpuinfo model name field whitespace x86/cpu/amd: Set X86_FEATURE_EXTD_APICID for future processors x86/gart: Check for GART support before accessing GART registers
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 cleanups from Ingo Molnar: "Misc cleanups" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Clean up types in xlate_dev_mem_ptr() some more x86: Deinline dma_free_attrs() x86: Deinline dma_alloc_attrs() x86: Remove unused TI_cpu x86: Merge common 32-bit values in asm-offsets.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler updates from Ingo Molnar: "The main changes are: - lockless wakeup support for futexes and IPC message queues (Davidlohr Bueso, Peter Zijlstra) - Replace spinlocks with atomics in thread_group_cputimer(), to improve scalability (Jason Low) - NUMA balancing improvements (Rik van Riel) - SCHED_DEADLINE improvements (Wanpeng Li) - clean up and reorganize preemption helpers (Frederic Weisbecker) - decouple page fault disabling machinery from the preemption counter, to improve debuggability and robustness (David Hildenbrand) - SCHED_DEADLINE documentation updates (Luca Abeni) - topology CPU masks cleanups (Bartosz Golaszewski) - /proc/sched_debug improvements (Srikar Dronamraju)" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (79 commits) sched/deadline: Remove needless parameter in dl_runtime_exceeded() sched: Remove superfluous resetting of the p->dl_throttled flag sched/deadline: Drop duplicate init_sched_dl_class() declaration sched/deadline: Reduce rq lock contention by eliminating locking of non-feasible target sched/deadline: Make init_sched_dl_class() __init sched/deadline: Optimize pull_dl_task() sched/preempt: Add static_key() to preempt_notifiers sched/preempt: Fix preempt notifiers documentation about hlist_del() within unsafe iteration sched/stop_machine: Fix deadlock between multiple stop_two_cpus() sched/debug: Add sum_sleep_runtime to /proc/<pid>/sched sched/debug: Replace vruntime with wait_sum in /proc/sched_debug sched/debug: Properly format runnable tasks in /proc/sched_debug sched/numa: Only consider less busy nodes as numa balancing destinations Revert 095bebf6 ("sched/numa: Do not move past the balance point if unbalanced") sched/fair: Prevent throttling in early pick_next_task_fair() preempt: Reorganize the notrace definitions a bit preempt: Use preempt_schedule_context() as the official tracing preemption point sched: Make preempt_schedule_context() function-tracing safe x86: Remove cpu_sibling_mask() and cpu_core_mask() x86: Replace cpu_**_mask() with topology_**_cpumask() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "These are the left over fixes from the v4.1 cycle" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Fix build breakage if prefix= is specified perf/x86: Honor the architectural performance monitoring version perf/x86/intel: Fix PMI handling for Intel PT perf/x86/intel/bts: Fix DS area sharing with x86_pmu events perf/x86: Add more Broadwell model numbers perf: Fix ring_buffer_attach() RCU sync, again
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf updates from Ingo Molnar: "Kernel side changes mostly consist of work on x86 PMU drivers: - x86 Intel PT (hardware CPU tracer) improvements (Alexander Shishkin) - x86 Intel CQM (cache quality monitoring) improvements (Thomas Gleixner) - x86 Intel PEBSv3 support (Peter Zijlstra) - x86 Intel PEBS interrupt batching support for lower overhead sampling (Zheng Yan, Kan Liang) - x86 PMU scheduler fixes and improvements (Peter Zijlstra) There's too many tooling improvements to list them all - here are a few select highlights: 'perf bench': - Introduce new 'perf bench futex' benchmark: 'wake-parallel', to measure parallel waker threads generating contention for kernel locks (hb->lock). (Davidlohr Bueso) 'perf top', 'perf report': - Allow disabling/enabling events dynamicaly in 'perf top': a 'perf top' session can instantly become a 'perf report' one, i.e. going from dynamic analysis to a static one, returning to a dynamic one is possible, to toogle the modes, just press 'f' to 'freeze/unfreeze' the sampling. (Arnaldo Carvalho de Melo) - Make Ctrl-C stop processing on TUI, allowing interrupting the load of big perf.data files (Namhyung Kim) 'perf probe': (Masami Hiramatsu) - Support glob wildcards for function name - Support $params special probe argument: Collect all function arguments - Make --line checks validate C-style function name. - Add --no-inlines option to avoid searching inline functions - Greatly speed up 'perf probe --list' by caching debuginfo. - Improve --filter support for 'perf probe', allowing using its arguments on other commands, as --add, --del, etc. 'perf sched': - Add option in 'perf sched' to merge like comms to lat output (Josef Bacik) Plus tons of infrastructure work - in particular preparation for upcoming threaded perf report support, but also lots of other work - and fixes and other improvements. See (much) more details in the shortlog and in the git log" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (305 commits) perf tools: Configurable per thread proc map processing time out perf tools: Add time out to force stop proc map processing perf report: Fix sort__sym_cmp to also compare end of symbol perf hists browser: React to unassigned hotkey pressing perf top: Tell the user how to unfreeze events after pressing 'f' perf hists browser: Honour the help line provided by builtin-{top,report}.c perf hists browser: Do not exit when 'f' is pressed in 'report' mode perf top: Replace CTRL+z with 'f' as hotkey for enable/disable events perf annotate: Rename source_line_percent to source_line_samples perf annotate: Display total number of samples with --show-total-period perf tools: Ensure thread-stack is flushed perf top: Allow disabling/enabling events dynamicly perf evlist: Add toggle_enable() method perf trace: Fix race condition at the end of started workloads perf probe: Speed up perf probe --list by caching debuginfo perf probe: Show usage even if the last event is skipped perf tools: Move libtraceevent dynamic list to separated LDFLAGS variable perf tools: Fix a problem when opening old perf.data with different byte order perf tools: Ignore .config-detected in .gitignore perf probe: Fix to return error if no probe is added ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull locking updates from Ingo Molnar: "The main changes are: - 'qspinlock' support, enabled on x86: queued spinlocks - these are now the spinlock variant used by x86 as they outperform ticket spinlocks in every category. (Waiman Long) - 'pvqspinlock' support on x86: paravirtualized variant of queued spinlocks. (Waiman Long, Peter Zijlstra) - 'qrwlock' support, enabled on x86: queued rwlocks. Similar to queued spinlocks, they are now the variant used by x86: CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y CONFIG_QUEUED_SPINLOCKS=y CONFIG_ARCH_USE_QUEUED_RWLOCKS=y CONFIG_QUEUED_RWLOCKS=y - various lockdep fixlets - various locking primitives cleanups, further WRITE_ONCE() propagation" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) locking/lockdep: Remove hard coded array size dependency locking/qrwlock: Don't contend with readers when setting _QW_WAITING lockdep: Do not break user-visible string locking/arch: Rename set_mb() to smp_store_mb() locking/arch: Add WRITE_ONCE() to set_mb() rtmutex: Warn if trylock is called from hard/softirq context arch: Remove __ARCH_HAVE_CMPXCHG locking/rtmutex: Drop usage of __HAVE_ARCH_CMPXCHG locking/qrwlock: Rename QUEUE_RWLOCK to QUEUED_RWLOCKS locking/pvqspinlock: Rename QUEUED_SPINLOCK to QUEUED_SPINLOCKS locking/pvqspinlock: Replace xchg() by the more descriptive set_mb() locking/pvqspinlock, x86: Enable PV qspinlock for Xen locking/pvqspinlock, x86: Enable PV qspinlock for KVM locking/pvqspinlock, x86: Implement the paravirt qspinlock call patching locking/pvqspinlock: Implement simple paravirt support for the qspinlock locking/qspinlock: Revert to test-and-set on hypervisors locking/qspinlock: Use a simple write to grab the lock locking/qspinlock: Optimize for smaller NR_CPUS locking/qspinlock: Extract out code snippets for the next patch locking/qspinlock: Add pending bit ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull RCU updates from Ingo Molnar: - Continued initialization/Kconfig updates: hide most Kconfig options from unsuspecting users. There's now a single high level configuration option: * * RCU Subsystem * Make expert-level adjustments to RCU configuration (RCU_EXPERT) [N/y/?] (NEW) Which if answered in the negative, leaves us with a single interactive configuration option: Offload RCU callback processing from boot-selected CPUs (RCU_NOCB_CPU) [N/y/?] (NEW) All the rest of the RCU options are configured automatically. Later on we'll remove this single leftover configuration option as well. - Remove all uses of RCU-protected array indexes: replace the rcu_[access|dereference]_index_check() APIs with READ_ONCE() and rcu_lockdep_assert() - RCU CPU-hotplug cleanups - Updates to Tiny RCU: a race fix and further code shrinkage. - RCU torture-testing updates: fixes, speedups, cleanups and documentation updates. - Miscellaneous fixes - Documentation updates * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits) rcutorture: Allow repetition factors in Kconfig-fragment lists rcutorture: Display "make oldconfig" errors rcutorture: Update TREE_RCU-kconfig.txt rcutorture: Make rcutorture scripts force RCU_EXPERT rcutorture: Update configuration fragments for rcutree.rcu_fanout_exact rcutorture: TASKS_RCU set directly, so don't explicitly set it rcutorture: Test SRCU cleanup code path rcutorture: Replace barriers with smp_store_release() and smp_load_acquire() locktorture: Change longdelay_us to longdelay_ms rcutorture: Allow negative values of nreaders to oversubscribe rcutorture: Exchange TREE03 and TREE08 NR_CPUS, speed up CPU hotplug rcutorture: Exchange TREE03 and TREE04 geometries locktorture: fix deadlock in 'rw_lock_irq' type rcu: Correctly handle non-empty Tiny RCU callback list with none ready rcutorture: Test both RCU-sched and RCU-bh for Tiny RCU rcu: Further shrink Tiny RCU by making empty functions static inlines rcu: Conditionally compile RCU's eqs warnings rcu: Remove prompt for RCU implementation rcu: Make RCU able to tolerate undefined CONFIG_RCU_KTHREAD_PRIO rcu: Make RCU able to tolerate undefined CONFIG_RCU_FANOUT_LEAF ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs updates from Al Viro: "In this pile: pathname resolution rewrite. - recursion in link_path_walk() is gone. - nesting limits on symlinks are gone (the only limit remaining is that the total amount of symlinks is no more than 40, no matter how nested). - "fast" (inline) symlinks are handled without leaving rcuwalk mode. - stack footprint (independent of the nesting) is below kilobyte now, about on par with what it used to be with one level of nested symlinks and ~2.8 times lower than it used to be in the worst case. - struct nameidata is entirely private to fs/namei.c now (not even opaque pointers are being passed around). - ->follow_link() and ->put_link() calling conventions had been changed; all in-tree filesystems converted, out-of-tree should be able to follow reasonably easily. For out-of-tree conversions, see Documentation/filesystems/porting for details (and in-tree filesystems for examples of conversion). That has sat in -next since mid-May, seems to survive all testing without regressions and merges clean with v4.1" * 'for-linus-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (131 commits) turn user_{path_at,path,lpath,path_dir}() into static inlines namei: move saved_nd pointer into struct nameidata inline user_path_create() inline user_path_parent() namei: trim do_last() arguments namei: stash dfd and name into nameidata namei: fold path_cleanup() into terminate_walk() namei: saner calling conventions for filename_parentat() namei: saner calling conventions for filename_create() namei: shift nameidata down into filename_parentat() namei: make filename_lookup() reject ERR_PTR() passed as name namei: shift nameidata inside filename_lookup() namei: move putname() call into filename_lookup() namei: pass the struct path to store the result down into path_lookupat() namei: uninline set_root{,_rcu}() namei: be careful with mountpoint crossings in follow_dotdot_rcu() Documentation: remove outdated information from automount-support.txt get rid of assorted nameidata-related debris lustre: kill unused helper lustre: kill unused macro (LOOKUP_CONTINUE) ...
-
- 22 6月, 2015 3 次提交
-
-
由 Ingo Molnar 提交于
Merge branches 'x86/apic', 'x86/asm', 'x86/mm' and 'x86/platform' into x86/core, to merge last updates Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Linus Torvalds 提交于
-
由 Paul Gortmaker 提交于
This driver leaks out into arch/parisc builds that don't have CONFIG_GENERIC_CLOCKEVENTS, leading to the following (truncated) wreckage: CC drivers/clocksource/timer-stm32.o drivers/clocksource/timer-stm32.c:38:28: error: field 'evtdev' has incomplete type drivers/clocksource/timer-stm32.c:44:19: warning: 'enum clock_event_mode' declared inside parameter list drivers/clocksource/timer-stm32.c:44:19: warning: its scope is only this definition or declaration, which is probably not what you want drivers/clocksource/timer-stm32.c:43:62: error: parameter 1 ('mode') has incomplete type drivers/clocksource/timer-stm32.c:43:13: error: function declaration isn't a prototype drivers/clocksource/timer-stm32.c: In function 'stm32_clock_event_set_mode': drivers/clocksource/timer-stm32.c:47:3: error: type defaults to 'int' in declaration of '__mptr' drivers/clocksource/timer-stm32.c:47:3: warning: initialization from incompatible pointer type drivers/clocksource/timer-stm32.c:51:7: error: 'CLOCK_EVT_MODE_PERIODIC' undeclared (first use in this function) drivers/clocksource/timer-stm32.c:51:7: note: each undeclared identifier is reported only once for each function it appears in drivers/clocksource/timer-stm32.c:56:7: error: 'CLOCK_EVT_MODE_ONESHOT' undeclared (first use in this function) Tighten up the dependencies to limit where it gets built by copying the style of the Kconfig line for CLKSRC_EFM32 a few lines above. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: http://lkml.kernel.org/r/1434841352-24300-1-git-send-email-paul.gortmaker@windriver.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 21 6月, 2015 5 次提交
-
-
由 Thomas Gleixner 提交于
hpet_assign_irq() is called with hpet_device->num as "hardware interrupt number", but hpet_device->num is initialized after the interrupt has been assigned, so it's always 0. As a consequence only the first MSI allocation succeeds, the following ones fail because the "hardware interrupt number" already exists. Move the initialization of dev->num and other fields before the call to hpet_assign_irq(), which is the ordering before the offending commit which introduced that regression. Fixes: "3cb96f0c x86/hpet: Enhance HPET IRQ to support hierarchical irqdomains" Reported-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1506211635010.4107@nanos Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull scsi target fixes from Nicholas Bellinger: "Apologies for the late pull request. Here are the outstanding target-pending fixes for v4.1 code. The series contains three patches from Sagi + Co that address a few iser-target issues that have been uncovered during recent testing at Mellanox. Patch #1 has a v3.16+ stable tag, and #2-3 have v3.10+ stable tags" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iser-target: Fix possible use-after-free iser-target: release stale iser connections iser-target: Fix variable-length response error completion
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "A smattering of fixes, mgag200: don't accept modes that aren't aligned properly as hw can't do it i915: two regression fixes radeon: one query to allow userspace fixes one oops fixer for older hw with new options enabled" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: don't probe MST on hw we don't support it on drm/radeon: Add RADEON_INFO_VA_UNMAP_WORKING query drm/mgag200: Reject non-character-cell-aligned mode widths Revert "drm/i915: Don't skip request retirement if the active list is empty" drm/i915: Always reset vma->ggtt_view.pages cache on unbinding
-
由 Thomas Gleixner 提交于
Get the infrastructure patches which are required for x86/apic into core
-
由 Thomas Gleixner 提交于
If an interrupt is marked with the no balancing flag, we still allow setting the affinity for such an interrupt from the kernel itself, but for interrupts which move the affinity from interrupt context via irq_move_mask_irq() this runs into a check for the no balancing flag, which in turn ends up with an endless storm of stack dumps because the move pending flag is not reset. Allow the move for interrupts which have the no balancing flag set and clear the move pending bit before checking for interrupts with the per cpu flag set. Reported-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1506201002570.4107@nanosSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 20 6月, 2015 10 次提交
-
-
由 Jiang Liu 提交于
irq == 0 is not a valid irq for a irqdomain MSI allocation, but hpet code checks only for negative return values. Reported-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/558447AF.30703@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - Replace CTRL+z with 'f' as hotkey for enable/disable events (Arnaldo Carvalho de Melo) - Do not exit when 'f' is pressed in 'report' mode (Arnaldo Carvalho de Melo) - Tell the user how to unfreeze events after pressing 'f' in 'perf top' (Arnaldo Carvalho de Melo) - React to unassigned hotkey pressing in 'top/report' (Arnaldo Carvalho de Melo) - Display total number of samples with --show-total-period in 'annotate' (Martin Liška) - Add timeout to make procfs mmap processing more robust (Kan Liang) - Fix sort__sym_cmp to also compare end of symbol (Yannick Brosseau) Infrastructure changes: - Ensure thread-stack is flushed (Adrian Hunter) Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fix from Arnaldo Carvalho de Melo: - Fix build breakage if prefix= is specified, this introduced a regression for a build idiom used by the Debian "linux-tools" package, that does: MAKE_PERF := $(MAKE) prefix=/usr V=1 ARCH=$(KERNEL_ARCH_PERF) ... Fix it. (Lukas Wunner) Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Kan Liang 提交于
The time out to limit the individual proc map processing was hard code to 500ms. This patch introduce a new option --proc-map-timeout to make the time limit configurable. Signed-off-by: NKan Liang <kan.liang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ying Huang <ying.huang@intel.com> Link: http://lkml.kernel.org/r/1434549071-25611-2-git-send-email-kan.liang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Kan Liang 提交于
System wide sampling like 'perf top' or 'perf record -a' read all threads /proc/xxx/maps before sampling. If there are any threads which generating a keeping growing huge maps, perf will do infinite loop during synthesizing. Nothing will be sampled. This patch fixes this issue by adding per-thread timeout to force stop this kind of endless proc map processing. PERF_RECORD_MISC_PROC_MAP_PARSE_TIME_OUT is introduced to indicate that the mmap record are truncated by time out. User will get warning notification when truncated mmap records are detected. Reported-by: NYing Huang <ying.huang@intel.com> Signed-off-by: NKan Liang <kan.liang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ying Huang <ying.huang@intel.com> Link: http://lkml.kernel.org/r/1434549071-25611-1-git-send-email-kan.liang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Yannick Brosseau 提交于
When using a map file from a JIT, due to memory reuse, we can obtain multiple symbols with the same start address but a different length. The symbols__find does check for the end so not doing it in sort__sym_cmp was causing the hist_entry in the annotate part of a report to match to the wrong entry, causing a fatal error. Signed-off-by: NYannick Brosseau <scientist@fb.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/1434584470-17771-1-git-send-email-scientist@fb.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
When that happens we were just ignoring the key press, now this message is presented in the bottom line (the help line): "Press '?' for help on key bindings" Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-iyma2j5kj3q9i1stl4mfh90n@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
When the user presses 'f' to disable events the visual cues are, well, the percentages not changing and the number of events freezing. Be more explicit by changing the help line at the bottom of the screen to show the following messages when 'f' is pressed: "Press 'f' again to re-enable the events" And then, when 'f' is pressed again: "Press 'f' to disable the events or 'h' Suggested-by: NIngo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-uhiswg9a9rxm5gxg7ptjskjn@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
The hists_browser was replacing whatever helpline provided by 'top' or 'report' with a static "Press '?' for help on key bindings", fix it. Now the message passed by top appears at the bottom of the screen: "For a higher level overview, try: perf top --sort comm,dso" As well the message that will be added when the user presses 'f' to disable the events, something along the lines of "press f again to re-enable...". Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-dacaja70mbfz3a0yj1n180gx@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
The 'f' hotkey is only used when in 'top', dynamic mode, to enable/disable events, currently not making sense in the 'report', static mode, where we can't go from showing the histogram entries created from a perf.data file to adding more events after recreating the evlist created from the perf.data file, albeit possible, this is not implemented right now. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-lholzf472pu98dkkijggwx2m@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-