- 24 3月, 2020 7 次提交
-
-
由 Josef Bacik 提交于
We can wander into a different root, so grab a ref on the root we look up. Later on we make root = fs_info->tree_root so we need this separate out label to make sure we do the right cleanup only in the case we're looking up a different root. Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
We look up an arbitrary fs root, we need to hold a ref on it while we're doing our search. Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
We lookup a arbitrary fs root, we need to hold a ref on that root. If we're using our own inodes root then grab a ref on that as well to make the cleanup easier. Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
We're creating the new root here, but we should hold the ref until after we've initialized the inode for it. Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
All this does is call btrfs_get_fs_root() with check_ref == true. Just use btrfs_get_fs_root() so we don't have a bunch of different helpers that do the same thing. Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
Now that we have a safe way to update the i_size, replace all uses of btrfs_ordered_update_i_size with btrfs_inode_safe_disk_i_size_write. Reviewed-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
We were using btrfs_i_size_write(), which unconditionally jacks up inode->disk_i_size. However since clone can operate on ranges we could have pending ordered extents for a range prior to the start of our clone operation and thus increase disk_i_size too far and have a hole with no file extent. Fix this by using the btrfs_ordered_update_i_size helper which will do the right thing in the face of pending ordered extents outside of our clone range. Reviewed-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 24 1月, 2020 1 次提交
-
-
由 Filipe Manana 提交于
Since btrfs was migrated to use the generic VFS helpers for clone and deduplication, it stopped allowing for the last block of a file to be deduplicated when the source file size is not sector size aligned (when eof is somewhere in the middle of the last block). There are two reasons for that: 1) The generic code always rounds down, to a multiple of the block size, the range's length for deduplications. This means we end up never deduplicating the last block when the eof is not block size aligned, even for the safe case where the destination range's end offset matches the destination file's size. That rounding down operation is done at generic_remap_check_len(); 2) Because of that, the btrfs specific code does not expect anymore any non-aligned range length's for deduplication and therefore does not work if such nona-aligned length is given. This patch addresses that second part, and it depends on a patch that fixes generic_remap_check_len(), in the VFS, which was submitted ealier and has the following subject: "fs: allow deduplication of eof block into the end of the destination file" These two patches address reports from users that started seeing lower deduplication rates due to the last block never being deduplicated when the file size is not aligned to the filesystem's block size. Link: https://lore.kernel.org/linux-btrfs/2019-1576167349.500456@svIo.N5dq.dFFD/ CC: stable@vger.kernel.org # 5.1+ Reviewed-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NFilipe Manana <fdmanana@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 20 1月, 2020 1 次提交
-
-
由 Omar Sandoval 提交于
We only pass this as 1 from __extent_writepage_io(). The parameter basically means "pretend I didn't pass in a page". This is silly since we can simply not pass in the page. Get rid of the parameter from btrfs_get_extent(), and since it's used as a get_extent_t callback, remove it from get_extent_t and btree_get_extent(), neither of which need it. While we're here, let's document btrfs_get_extent(). Signed-off-by: NOmar Sandoval <osandov@fb.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 17 1月, 2020 1 次提交
-
-
由 Filipe Manana 提交于
If scrub returns an error we are not copying back the scrub arguments structure to user space. This prevents user space to know how much progress scrub has done if an error happened - this includes -ECANCELED which is returned when users ask for scrub to stop. A particular use case, which is used in btrfs-progs, is to resume scrub after it is canceled, in that case it relies on checking the progress from the scrub arguments structure and then use that progress in a call to resume scrub. So fix this by always copying the scrub arguments structure to user space, overwriting the value returned to user space with -EFAULT only if copying the structure failed to let user space know that either that copying did not happen, and therefore the structure is stale, or it happened partially and the structure is probably not valid and corrupt due to the partial copy. Reported-by: NGraham Cobb <g.btrfs@cobb.uk.net> Link: https://lore.kernel.org/linux-btrfs/d0a97688-78be-08de-ca7d-bcb4c7fb397e@cobb.uk.net/ Fixes: 06fe39ab ("Btrfs: do not overwrite scrub error with fault error in scrub ioctl") CC: stable@vger.kernel.org # 5.1+ Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: NQu Wenruo <wqu@suse.com> Tested-by: NGraham Cobb <g.btrfs@cobb.uk.net> Signed-off-by: NFilipe Manana <fdmanana@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 13 12月, 2019 2 次提交
-
-
由 Josef Bacik 提交于
We can just abort the transaction here, and in fact do that for every other failure in this function except these two cases. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: NFilipe Manana <fdmanana@suse.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Filipe Manana 提交于
Normally when cloning a file range if we find an implicit hole at the end of the range we assume it is because the NO_HOLES feature is enabled. However that is not always the case. One well known case [1] is when we have a power failure after mixing buffered and direct IO writes against the same file. In such cases we need to punch a hole in the destination file, and if the NO_HOLES feature is not enabled, we need to insert explicit file extent items to represent the hole. After commit 690a5dbf ("Btrfs: fix ENOSPC errors, leading to transaction aborts, when cloning extents"), we started to insert file extent items representing the hole with an item size of 0, which is invalid and should be 53 bytes (the size of a btrfs_file_extent_item structure), resulting in all sorts of corruptions and invalid memory accesses. This is detected by the tree checker when we attempt to write a leaf to disk. The problem can be sporadically triggered by test case generic/561 from fstests. That test case does not exercise power failure and creates a new filesystem when it starts, so it does not use a filesystem created by any previous test that tests power failure. However the test does both buffered and direct IO writes (through fsstress) and it's precisely that which is creating the implicit holes in files. That happens even before the commit mentioned earlier. I need to investigate why we get those implicit holes to check if there is a real problem or not. For now this change fixes the regression of introducing file extent items with an item size of 0 bytes. Fix the issue by calling btrfs_punch_hole_range() without passing a btrfs_clone_extent_info structure, which ensures file extent items are inserted to represent the hole with a correct item size. We were passing a btrfs_clone_extent_info with a value of 0 for its 'item_size' field, which was causing the insertion of file extent items with an item size of 0. [1] https://www.spinics.net/lists/linux-btrfs/msg75350.htmlReported-by: NDavid Sterba <dsterba@suse.com> Fixes: 690a5dbf ("Btrfs: fix ENOSPC errors, leading to transaction aborts, when cloning extents") Signed-off-by: NFilipe Manana <fdmanana@suse.com> Reviewed-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 19 11月, 2019 3 次提交
-
-
由 David Sterba 提交于
The type name is misleading, a single entry is named 'cache' while this normally means a collection of objects. Rename that everywhere. Also the identifier was quite long, making function prototypes harder to format. Suggested-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NQu Wenruo <wqu@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
The on-disk format of block group item makes use of the key that stores the offset and length. This is further used in the code, although this makes thing harder to understand. The key is also packed so the offset/length is not properly aligned as u64. Add start (key.objectid) and length (key.offset) members to block group and remove the embedded key. When the item is searched or written, a local variable for key is used. Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Reviewed-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NQu Wenruo <wqu@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
For unknown reasons, the member 'used' in the block group struct is stored in the b-tree item and accessed everywhere using the special accessor helper. Let's unify it and make it a regular member and only update the item before writing it to the tree. The item is still being used for flags and chunk_objectid, there's some duplication until the item is removed in following patches. Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Reviewed-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NQu Wenruo <wqu@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 18 11月, 2019 4 次提交
-
-
由 Marcos Paulo de Souza 提交于
Some functions are doing some unnecessary indirection to reach the btrfs_fs_info struct. Change these functions to receive a btrfs_fs_info struct instead of a *file. Reviewed-by: NAnand Jain <anand.jain@oracle.com> Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NMarcos Paulo de Souza <mpdesouza@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Chengguang Xu 提交于
The compression type upper limit constant is the same as the last value and this is confusing. In order to keep coding style consistent, use BTRFS_NR_COMPRESS_TYPES as the total number that follows the idom of 'NR' being one more than the last value. Signed-off-by: NChengguang Xu <cgxu519@mykernel.net> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
The attribute is more relaxed than const and the functions could dereference pointers, as long as the observable state is not changed. We do have such functions, based on -Wsuggest-attribute=pure . The visible effects of this patch are negligible, there are differences in the assembly but hard to summarize. Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
The parameter is now always set to NULL and could be dropped. The last user was get_default_root but that got reworked in 05dbe683 ("Btrfs: unify subvol= and subvolid= mounting") and the parameter became unused. Reviewed-by: NAnand Jain <anand.jain@oracle.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 05 11月, 2019 1 次提交
-
-
由 David Sterba 提交于
The two ioctls START_SYNC and WAIT_SYNC were mistakenly marked as deprecated and scheduled for removal but we actualy do use them for 'btrfs subvolume delete -C/-c'. The deprecated thing in ebc87351 should have been just the async flag for subvolume creation. The deprecation has been added in this development cycle, remove it until it's time. Fixes: ebc87351 ("btrfs: Deprecate BTRFS_SUBVOL_CREATE_ASYNC flag") Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 16 10月, 2019 1 次提交
-
-
由 Qu Wenruo 提交于
[Background] Btrfs qgroup uses two types of reserved space for METADATA space, PERTRANS and PREALLOC. PERTRANS is metadata space reserved for each transaction started by btrfs_start_transaction(). While PREALLOC is for delalloc, where we reserve space before joining a transaction, and finally it will be converted to PERTRANS after the writeback is done. [Inconsistency] However there is inconsistency in how we handle PREALLOC metadata space. The most obvious one is: In btrfs_buffered_write(): btrfs_delalloc_release_extents(BTRFS_I(inode), reserve_bytes, true); We always free qgroup PREALLOC meta space. While in btrfs_truncate_block(): btrfs_delalloc_release_extents(BTRFS_I(inode), blocksize, (ret != 0)); We only free qgroup PREALLOC meta space when something went wrong. [The Correct Behavior] The correct behavior should be the one in btrfs_buffered_write(), we should always free PREALLOC metadata space. The reason is, the btrfs_delalloc_* mechanism works by: - Reserve metadata first, even it's not necessary In btrfs_delalloc_reserve_metadata() - Free the unused metadata space Normally in: btrfs_delalloc_release_extents() |- btrfs_inode_rsv_release() Here we do calculation on whether we should release or not. E.g. for 64K buffered write, the metadata rsv works like: /* The first page */ reserve_meta: num_bytes=calc_inode_reservations() free_meta: num_bytes=0 total: num_bytes=calc_inode_reservations() /* The first page caused one outstanding extent, thus needs metadata rsv */ /* The 2nd page */ reserve_meta: num_bytes=calc_inode_reservations() free_meta: num_bytes=calc_inode_reservations() total: not changed /* The 2nd page doesn't cause new outstanding extent, needs no new meta rsv, so we free what we have reserved */ /* The 3rd~16th pages */ reserve_meta: num_bytes=calc_inode_reservations() free_meta: num_bytes=calc_inode_reservations() total: not changed (still space for one outstanding extent) This means, if btrfs_delalloc_release_extents() determines to free some space, then those space should be freed NOW. So for qgroup, we should call btrfs_qgroup_free_meta_prealloc() other than btrfs_qgroup_convert_reserved_meta(). The good news is: - The callers are not that hot The hottest caller is in btrfs_buffered_write(), which is already fixed by commit 336a8bb8 ("btrfs: Fix wrong btrfs_delalloc_release_extents parameter"). Thus it's not that easy to cause false EDQUOT. - The trans commit in advance for qgroup would hide the bug Since commit f5fef459 ("btrfs: qgroup: Make qgroup async transaction commit more aggressive"), when btrfs qgroup metadata free space is slow, it will try to commit transaction and free the wrongly converted PERTRANS space, so it's not that easy to hit such bug. [FIX] So to fix the problem, remove the @qgroup_free parameter for btrfs_delalloc_release_extents(), and always pass true to btrfs_inode_rsv_release(). Reported-by: NFilipe Manana <fdmanana@suse.com> Fixes: 43b18595 ("btrfs: qgroup: Use separate meta reservation type for delalloc") CC: stable@vger.kernel.org # 4.19+ Reviewed-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NQu Wenruo <wqu@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 09 9月, 2019 7 次提交
-
-
由 Omar Sandoval 提交于
Since commit fee187d9 ("Btrfs: do not set EXTENT_DIRTY along with EXTENT_DELALLOC"), we never set EXTENT_DIRTY in inode->io_tree, so we can simplify and stop trying to clear it. Reviewed-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NOmar Sandoval <osandov@fb.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
Support for asynchronous snapshot creation was originally added in 72fd032e ("Btrfs: add SNAP_CREATE_ASYNC ioctl") to cater for ceph's backend needs. However, since Ceph has deprecated support for btrfs there is no longer need for that support in btrfs. Additionally, this was never supported by btrfs-progs, the official userspace tools. Reviewed-by: NQu Wenruo <wqu@suse.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
In order to unexport the feature type array, add a helper for the enum-to-string conversion. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
This is prep work for moving all of the block group cache code into its own file. Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> [ minor comment updates ] Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Filipe Manana 提交于
The bulk of the work done when cloning extents, at ioctl.c:btrfs_clone(), is done inside an if statement that checks if the found key has the type BTRFS_EXTENT_DATA_KEY. That if statement is redundant however, because btrfs_search_slot() always leaves us in a leaf slot that points to a key that is always greater then or equals to the search key, and our search key here has that type, and because we bail out before that if statement if the key at the given leaf slot is greater then BTRFS_EXTENT_DATA_KEY. Therefore just remove that if statement, not only because it is useless but mostly because it increases the nesting/indentation level in this function which is quite big and makes things a bit awkward whenever I need to fix something that requires changing btrfs_clone() (and it has been like that for many years already). Signed-off-by: NFilipe Manana <fdmanana@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Eric Sandeen 提交于
I lifted the btrfs label get/set ioctls to the vfs some time ago, but never followed up to use those common definitions directly in btrfs. This patch does that. Signed-off-by: NEric Sandeen <sandeen@redhat.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Filipe Manana 提交于
When cloning extents (or deduplicating) we create a transaction with a space reservation that considers we will drop or update a single file extent item of the destination inode (that we modify a single leaf). That is fine for the vast majority of scenarios, however it might happen that we need to drop many file extent items, and adjust at most two file extent items, in the destination root, which can span multiple leafs. This will lead to either the call to btrfs_drop_extents() to fail with ENOSPC or the subsequent calls to btrfs_insert_empty_item() or btrfs_update_inode() (called through clone_finish_inode_update()) to fail with ENOSPC. Such failure results in a transaction abort, leaving the filesystem in a read-only mode. In order to fix this we need to follow the same approach as the hole punching code, where we create a local reservation with 1 unit and keep ending and starting transactions, after balancing the btree inode, when __btrfs_drop_extents() returns ENOSPC. So fix this by making the extent cloning call calls the recently added btrfs_punch_hole_range() helper, which is what does the mentioned work for hole punching, and make sure whenever we drop extent items in a transaction, we also add a replacing file extent item, to avoid corruption (a hole) if after ending a transaction and before starting a new one, the old transaction gets committed and a power failure happens before we finish cloning. A test case for fstests follows soon. Reported-by: NDavid Goodwin <david@codepoets.co.uk> Link: https://lore.kernel.org/linux-btrfs/a4a4cf31-9cf4-e52c-1f86-c62d336c9cd1@codepoets.co.uk/Reported-by: NSam Tygier <sam@tygier.co.uk> Link: https://lore.kernel.org/linux-btrfs/82aace9f-a1e3-1f0b-055f-3ea75f7a41a0@tygier.co.uk/ Fixes: b6f3409b ("Btrfs: reserve sufficient space for ioctl clone") Signed-off-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 04 7月, 2019 1 次提交
-
-
由 Josef Bacik 提交于
We have code for data and metadata reservations for delalloc. There's quite a bit of code here, and it's used in a lot of places so I've separated it out to it's own file. inode.c and file.c are already pretty large, and this code is complicated enough to live in its own space. Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 02 7月, 2019 1 次提交
-
-
由 Josef Bacik 提交于
Migrate the struct definition and the one helper that's in ctree.h into space-info.h Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 01 7月, 2019 3 次提交
-
-
由 Darrick J. Wong 提交于
Create a generic checking function for the incoming FS_IOC_FSSETXATTR fsxattr values so that we can standardize some of the implementation behaviors. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NJan Kara <jack@suse.cz>
-
由 Darrick J. Wong 提交于
Create a generic function to check incoming FS_IOC_SETFLAGS flag values and later prepare the inode for updates so that we can standardize the implementations that follow ext4's flag values. Note that the efivarfs implementation no longer fails a no-op SETFLAGS without CAP_LINUX_IMMUTABLE since that's the behavior in ext*. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NJan Kara <jack@suse.cz> Reviewed-by: NChristoph Hellwig <hch@lst.de> Acked-by: NDavid Sterba <dsterba@suse.com> Reviewed-by: NBob Peterson <rpeterso@redhat.com>
-
由 Qu Wenruo 提交于
btrfs: Flush before reflinking any extent to prevent NOCOW write falling back to COW without data reservation [BUG] The following script can cause unexpected fsync failure: #!/bin/bash dev=/dev/test/test mnt=/mnt/btrfs mkfs.btrfs -f $dev -b 512M > /dev/null mount $dev $mnt -o nospace_cache # Prealloc one extent xfs_io -f -c "falloc 8k 64m" $mnt/file1 # Fill the remaining data space xfs_io -f -c "pwrite 0 -b 4k 512M" $mnt/padding sync # Write into the prealloc extent xfs_io -c "pwrite 1m 16m" $mnt/file1 # Reflink then fsync, fsync would fail due to ENOSPC xfs_io -c "reflink $mnt/file1 8k 0 4k" -c "fsync" $mnt/file1 umount $dev The fsync fails with ENOSPC, and the last page of the buffered write is lost. [CAUSE] This is caused by: - Btrfs' back reference only has extent level granularity So write into shared extent must be COWed even only part of the extent is shared. So for above script we have: - fallocate Create a preallocated extent where we can do NOCOW write. - fill all the remaining data and unallocated space - buffered write into preallocated space As we have not enough space available for data and the extent is not shared (yet) we fall into NOCOW mode. - reflink Now part of the large preallocated extent is shared, later write into that extent must be COWed. - fsync triggers writeback But now the extent is shared and therefore we must fallback into COW mode, which fails with ENOSPC since there's not enough space to allocate data extents. [WORKAROUND] The workaround is to ensure any buffered write in the related extents (not just the reflink source range) get flushed before reflink/dedupe, so that NOCOW writes succeed that happened before reflinking succeed. The workaround is expensive, we could do it better by only flushing NOCOW range, but that needs extra accounting for NOCOW range. For now, fix the possible data loss first. Reviewed-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NQu Wenruo <wqu@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 20 6月, 2019 1 次提交
-
-
由 Amir Goldstein 提交于
This will allow generating fsnotify delete events after the fsnotify_nameremove() hook is removed from d_delete(). Signed-off-by: NAmir Goldstein <amir73il@gmail.com> Acked-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NJan Kara <jack@suse.cz>
-
- 17 6月, 2019 1 次提交
-
-
由 Filipe Manana 提交于
After the recent series of cleanups in the properties and xattrs modules that landed in the 5.2 merge window, we ended up with a regression where after deleting the compression xattr property through the setflags ioctl, we don't set the BTRFS_INODE_COPY_EVERYTHING flag in the inode anymore. As a consequence, if the inode was fsync'ed when it had the compression property set, after deleting the compression property through the setflags ioctl and fsync'ing again the inode, the log will still contain the compression xattr, because the inode did not had that bit set, which made the fsync not delete all xattrs from the log and copy all xattrs from the subvolume tree to the log tree. This regression happens due to the fact that that series of cleanups made btrfs_set_prop() call the old function do_setxattr() (which is now named btrfs_setxattr()), and not the old version of btrfs_setxattr(), which is now called btrfs_setxattr_trans(). Fix this by setting the BTRFS_INODE_COPY_EVERYTHING bit in the current btrfs_setxattr() function and remove it from everywhere else, including its setup at btrfs_ioctl_setflags(). This is cleaner, avoids similar regressions in the future, and centralizes the setup of the bit. After all, the need to setup this bit should only be in the xattrs module, since it is an implementation of xattrs. Fixes: 04e6863b ("btrfs: split btrfs_setxattr calls regarding transaction") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 30 4月, 2019 5 次提交
-
-
由 Anand Jain 提交于
There isn't real use of making struct inode::i_mode a local copy, it saves a dereference one time, not much. Just use it directly. Signed-off-by: NAnand Jain <anand.jain@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Anand Jain 提交于
btrfs_inode_flags_to_fsflags() is copied into @old_fsflags and used only once. Instead used it directly. Signed-off-by: NAnand Jain <anand.jain@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Anand Jain 提交于
Instead of updating the binode::flags directly, update a local copy, and then at the point of no error, store copy it to the binode::flags. Signed-off-by: NAnand Jain <anand.jain@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Anand Jain 提交于
The patch ("btrfs: start transaction in btrfs_ioctl_setflags()") used btrfs_set_prop() instead of btrfs_set_prop_trans() by which now the inode::i_flags update functions such as btrfs_sync_inode_flags_to_i_flags() and btrfs_update_inode() is called in btrfs_ioctl_setflags() instead of btrfs_set_prop_trans()->btrfs_setxattr() as earlier. So the inode::i_flags remains unmodified until the thread has checked all the conditions. So drop the saved inode::i_flags in out_i_flags. Signed-off-by: NAnand Jain <anand.jain@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Anand Jain 提交于
Inode attribute can be set through the FS_IOC_SETFLAGS ioctl. This flags also includes compression attribute for which we would set/reset the compression extended attribute. While doing this there is a bit of duplicate code, the following things happens twice: - start/end_transaction - inode_inc_iversion() - current_time update to inode->i_ctime - and btrfs_update_inode() These are updated both at btrfs_ioctl_setflags() and btrfs_set_props() as well. This patch merges these two duplicate codes at btrfs_ioctl_setflags(). Signed-off-by: NAnand Jain <anand.jain@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-