- 17 1月, 2010 2 次提交
-
-
由 Roel Kluin 提交于
With `while (timeout++ < MAX_TIMEOUT)' timeout reaches MAX_TIMEOUT + 1 after the loop. This is probably unlikely to produce a problem. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Tobias Klauser 提交于
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 16 1月, 2010 7 次提交
-
-
git://git.fluff.org/bjdooks/linux由 Linus Torvalds 提交于
* 'for-linus/samsung' of git://git.fluff.org/bjdooks/linux: ARM: MINI2440: Fixup __initdata usage ARM: MINI2440: Fix crash on boot due to improper __initdata qualifier ARM: SMDK6410: Specify no GPIO for B_PWR_5V regulator ARM: S3C: NAND: Check the existence of nr_map before copying
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Ensure index stays within bounds in amd64_get_scrub_rate
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: sentelic - fix left/right horizontal scroll mapping Input: pmouse - move Sentelic probe down the list Input: add compat support for sysfs and /proc capabilities output Input: i8042 - add Dritek quirk for Acer Aspire 5610. Input: xbox - do not use GFP_KERNEL under spinlock Input: psmouse - fix Synaptics detection when protocol is disabled Input: bcm5974 - report ABS_MT events Input: davinci_keyscan - add device_enable method to platform data Input: evdev - be less aggressive about sending SIGIO notifies Input: atkbd - fix canceling event_work in disconnect Input: serio - fix potential deadlock when unbinding drivers Input: gf2k - fix &&/|| confusion in gf2k_connect()
-
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6: alpha: cpumask_of_node() should handle -1 as a node alpha: add myself as a maintainer, and drop mention of 2.4
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* 'sh/for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: serial: sh-sci: using correct fifo size for SCIF and SCIFA ports. sh: mach-ecovec24: Add motion sensor driver support.
-
由 Eric Paris 提交于
inotify will WARN() if it finds that the idr and the fsnotify internals somehow got out of sync. It was only supposed to do this once but due to this stupid bug it would warn every single time a problem was detected. Signed-off-by: NEric Paris <eparis@redhat.com> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Paris 提交于
Since commit 7e790dd5 ("inotify: fix error paths in inotify_update_watch") inotify changed the manor in which it gave watch descriptors back to userspace. Previous to this commit inotify acted like the following: inotify_add_watch(X, Y, Z) = 1 inotify_rm_watch(X, 1); inotify_add_watch(X, Y, Z) = 2 but after this patch inotify would return watch descriptors like so: inotify_add_watch(X, Y, Z) = 1 inotify_rm_watch(X, 1); inotify_add_watch(X, Y, Z) = 1 which I saw as equivalent to opening an fd where open(file) = 1; close(1); open(file) = 1; seemed perfectly reasonable. The issue is that quite a bit of userspace apparently relies on the behavior in which watch descriptors will not be quickly reused. KDE relies on it, I know some selinux packages rely on it, and I have heard complaints from other random sources such as debian bug 558981. Although the man page implies what we do is ok, we broke userspace so this patch almost reverts us to the old behavior. It is still slightly racey and I have patches that would fix that, but they are rather large and this will fix it for all real world cases. The race is as follows: - task1 creates a watch and blocks in idr_new_watch() before it updates the hint. - task2 creates a watch and updates the hint. - task1 updates the hint with it's older wd - task removes the watch created by task2 - task adds a new watch and will reuse the wd originally given to task2 it requires moving some locking around the hint (last_wd) but this should solve it for the real world and be -stable safe. As a side effect this patch papers over a bug in the lib/idr code which is causing a large number WARN's to pop on people's system and many reports in kerneloops.org. I'm working on the root cause of that idr bug seperately but this should make inotify immune to that issue. Signed-off-by: NEric Paris <eparis@redhat.com> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 1月, 2010 10 次提交
-
-
由 Roel Kluin 提交于
Add a missing iterator variable thus fixing the conditional of the for-loop in amd64_get_scrub_rate(). Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
-
由 Ben Dooks 提交于
Remove some of the __initdata tags which are currently inappropriate for platform_device and some of the platform data. These can be returned once support for copying platform devices and data is added. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Uri Yosef 提交于
This patch fix mini2440 crash on boot due to improper __initdata qualifier on mini2440_led1_pdata. Signed-off-by: NUri Yosef <uri.yosef@gmail.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Mark Brown 提交于
Since the fixed voltage regulator grew support for GPIO based enables and GPIO 0 is valid on some systems we need to specify that there is no valid GPIO enable control. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Markus Pietrek 提交于
The sh-sci driver used the wrong fifosize for PORT_SCIFA and PORT_SCIF ports. If an incorrect size is used, the serial core will enforce an early shutdown on the port, especially with baudrates < 9600. Signed-off-by: NMarkus Pietrek <Markus.Pietrek@emtrion.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 NISHIMOTO Hiroki 提交于
This patch adds support for the lis3lv02d motion sensor connected via i2c on the Ecovec board. Tested with evtest. Signed-off-by: NNISHIMOTO Hiroki <nishimoto.hiroki@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Anton Blanchard 提交于
CC: Richard Henderson <rth@twiddle.net> CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: NMatt Turner <mattst88@gmail.com> CC: linux-alpha@vger.kernel.org CC: Rusty Russell <rusty@rustcorp.com.au> CC: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NAnton Blanchard <anton@samba.org>
-
由 Matt Turner 提交于
CC: Richard Henderson <rth@twiddle.net> CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru> CC: linux-alpha@vger.kernel.org Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
git://git390.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] tape_char: add missing compat_ptr conversion [S390] zcrypt: add sanity check before copy_from_user() [S390] unwire sys_recvmmsg again [S390] con3215: remove empty ioctl function [S390] dasd: add proper compat pointer conversion for symmetrix ioctl [S390] mmap: add missing compat_ptr conversion to both mmap compat syscalls [S390] bug: implement arch specific __WARN macro [S390] Move __cpu_logical_map to smp.c [S390] tape_block: remove ioctl function [S390] smp: remove volatile type quilifier from __cpu_logical_map [S390] smp: setup smp_processor_id early [S390] use helpers for rlimits [S390] fs3270: add missing compat ptr conversion [S390] vmcp: add missing compat ptr conversion [S390] cio: add missing compat ptr conversion [S390] dasd: add missing compat ptr conversion [S390] remove superfluous TIF_USEDFPU bit [S390] duplicate SIGTRAP on signal delivery. [S390] clear TIF_SINGLE_STEP for new process. [S390] fix loading of PER control registers for utrace.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits) net: fix build erros with CONFIG_BUG=n, CONFIG_GENERIC_BUG=n ipv6: skb_dst() can be NULL in ipv6_hop_jumbo(). tg3: Update copyright and driver version tg3: Disable 5717 serdes and B0 support tg3: Add reliable serdes detection for 5717 A0 tg3: Fix std rx prod ring handling tg3: Fix std prod ring nicaddr for 5787 and 57765 sfc: Fix conditions for MDIO self-test sfc: Fix polling for slow MCDI operations e1000e: workaround link issues on busy hub in half duplex on 82577/82578 e1000e: MDIO slow mode should always be done for 82577 ixgbe: update copyright dates ixgbe: Do not attempt to perform interrupts in netpoll when down cfg80211: fix refcount imbalance when wext is disabled mac80211: fix queue selection for data frames on monitor interfaces iwlwifi: silence buffer overflow warning iwlwifi: disable tx on beacon update notification iwlwifi: fix iwl_queue_used bug when read_ptr == write_ptr mac80211: fix endian error mac80211: add missing sanity checks for action frames ...
-
- 14 1月, 2010 21 次提交
-
-
由 Ramax Lo 提交于
Since the structure field nr_map is optional, we need to check whether the chip number map is provided to avoid unexpected NULL pointer exception. Signed-off-by: NRamax Lo <ramaxlo@gmail.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Octavian Purdila 提交于
Fixed build errors introduced by commit 7ad6848c (ip: fix mc_loop checks for tunnels with multicast outer addresses) Signed-off-by: NOctavian Purdila <opurdila@ixiacom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This fixes CERT-FI FICORA #341748 Discovered by Olli Jarva and Tuomo Untinen from the CROSS project at Codenomicon Ltd. Just like in CVE-2007-4567, we can't rely upon skb_dst() being non-NULL at this point. We fixed that in commit e76b2b25 ("[IPV6]: Do no rely on skb->dst before it is assigned.") However commit 483a47d2 ("ipv6: added net argument to IP6_INC_STATS_BH") put a new version of the same bug into this function. Complicating analysis further, this bug can only trigger when network namespaces are enabled in the build. When namespaces are turned off, the dev_net() does not evaluate it's argument, so the dereference would not occur. So, for a long time, namespaces couldn't be turned on unless SYSFS was disabled. Therefore, this code has largely been disabled except by people turning it on explicitly for namespace development. With help from Eugene Teo <eugene@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch updates the copyright notice for 2010 and updates the version number to 3.106. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
The B0 revision of the 5717 will not get enough testing by the time 2.6.33 ships. Since the kernel is already at RC3, serdes support will require too many patches to fix. For these reasons, this patch disables 5717 serdes support and will refuse to attach to all 5717 devices that are later than an A0 revision. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
The serdes status bit does not work as intended for the 5717 A0. This patch implements an alternative detection scheme that will only be valid for A0 revisions. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
There are some tg3 devices that require the driver to post new rx buffers in smaller increments. Commit 4361935a, "tg3: Consider rx_std_prod_idx a hw mailbox" changed how the driver tracks the rx producer ring updates, but it does not make any special considerations for the above-mentioned devices. For those devices, it is possible for the driver to hit the special case path, which updates the hardware mailbox register but skips updating the shadow software mailbox member. If the special case path represents the final mailbox update for this ISR iteration, the hardware and software mailbox values will be out of sync. Ultimately, this will cause the driver to use a stale mailbox value on the next iteration, which will appear to the hardware as a large rx buffer update. Bad things ensue. The fix is to update the software shadow mailbox member when the special case path is taken. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Reported-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
Commit 87668d35, titled "tg3: Don't touch RCB nic addresses", tried to avoid assigning the nic address of the standard producer ring. Unfortunately, the default nic address is not correct for the 5787, the 5755M, or the 57765. This patch reenables the old behavior and opts out of the assignment only for the 5717. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Tested-by: NChow Loong Jin <hyperair@ubuntu.com> Tested-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
The MDIO self-test should not be run on boards without an MDIO PHY, such as SFN5122F-R3 and later revisions. It should also not try to address a specific MMD in an MDIO clause 22 PHY. Check the mode_support field to decide which mode to use, if any. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
When the interface is down and we are using polled mode for MCDI operations, we busy-wait for completion for approximately 1 jiffy using udelay() and then back off to schedule(). But the completion will not wake the task, since we are using polled mode! We must use schedule_timeout_uninterruptible() instead. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bruce Allan 提交于
This patch removes a delay in hardware after every received packet allowing more time for transmitted packets to go out in between received packets in half duplex. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bruce Allan 提交于
A previous 82577 workaround that set the MDIO access speed to slow mode for every PHY register read/write when the cable is unplugged should instead set the access mode to always be slow before any PHY register access. Since the mode bit gets cleared when the PHY is reset, set the mode after every PHY reset. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shannon Nelson 提交于
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch resolves issues seen when running netconsole and rebooting via reboot -f. The issue was due to the fact that we were attempting to perform interrupt actions when the q_vectors and rings had already been freed via the ixgbe_shutdown routines. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Acked-by: NMallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://xenbits.xensource.com/people/ianc/linux-2.6由 Linus Torvalds 提交于
* 'for-linus/bugfixes' of git://xenbits.xensource.com/people/ianc/linux-2.6: xen: fix hang on suspend.
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: change drm set mode messages as DRM_DEBUG drm: fix crtc no modes printf + typo drm/radeon/kms: only evict to GTT if CP is ready drm/radeon/kms: Fix crash getting TV info with no BIOS. drm/radeon/kms/rv100: reject modes > 135 Mhz on DVI (v2) drm/radeon/kms/r6xx+: make irq handler less verbose drm/radeon/kms: fix up LVDS handling on macs (v2)
-
由 Benjamin Herrenschmidt 提交于
Commit ac4c2a3b broke the build of all powerpc boot wrappers. It attempts to add an include of autoconf.h but used the wrong path for it. It also adds -D__KERNEL__ to our boot wrapper, both things that we pretty much didn't do on purpose so far. We want our boot wrapper to remain independent enough of the kernel for various reasons, one of them being that you can "wrap" an existing kernel at distro install time which allows to ship one kernel image and a set of boot wrappers for different platforms, the wrappers don't have to be built out of the same kernel build tree. It's also incorrect to do what the patch does in our boot environment since we may not have a proper alignment exception handler which means we may not be able to fixup the few cases where an unaligned access will need SW emulation (depends on the core variant, could be when crossing page or segment boundaries for example). This patch fixes it by putting the old code back in and using the new "fancy" variant only when CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is set, which happens not to be set on powerpc since we don't include autoconf.h. It also reverts the changes to our boot wrapper Makefile. This means that x86 should, afaik, keep the optimisations since its boot wrapper does include autoconf.h and define __KERNEL__ (though I doubt they make that much different outside of slow embedded processors). Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: wacom: Add BTN_TOOL_FINGER for pad button reporting HID: add device IDs for new model of Apple Wireless Keyboard HID: fix pad button definition in hid-wacom HID: Support 171 byte variant of Samsung USB IR receiver HID: blacklist ET&T TC5UH touchscreen controller
-
git://repo.or.cz/linux-kbuild由 Linus Torvalds 提交于
* 'for-33' of git://repo.or.cz/linux-kbuild: Makefile: do not override LC_CTYPE kbuild: really fix bzImage build with non-bash sh
-
由 OGAWA Hirofumi 提交于
If __block_prepare_write() was failed in block_write_begin(), the allocated blocks can be outside of ->i_size. But new truncate_pagecache() in vmtuncate() does nothing if new < old. It means the above usage is not working anymore. So, this patch fixes it by removing "new < old" check. It would need more cleanup/change. But, now -rc and truncate working is in progress, so, this tried to fix it minimum change. Acked-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
* fasync-helper: fasync: split 'fasync_helper()' into separate add/remove functions
-