Pull target fix from Nicholas Bellinger:
 "So just a single target fix for v3.7.0 this time around from Roland to
  address a aborted command bug w/ tcm_qla2xxx fabric ports.

  Also, there is one outstanding IBLOCK + virtio-blk bug that is still
  being tracked down effecting v3.6.x, but AFAICT thus far this appears
  to be a bug outside of target code."

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: Fix handling of aborted commands

Pull DRM fixes from Dave Airlie:
 "Just driver fixes, nothing major, except maybe the Ironlake rc6
  disable:

   - intel:
     * revert ironlake rc6 - we still have one ilk regression, but this
       gets rid of one big one
     * turn off cloning
     * a directed fix for Apple edp
   - radeon: one modesetting fix
   - exynos: minor fixes"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  radeon: fix pll/ctrc mapping on dce2 and dce3 hardware
  Revert "drm/i915: enable rc6 on ilk again"
  drm/i915: do not default to 18 bpp for eDP if missing from VBT
  drm/exynos: Fix potential NULL pointer dereference in exynos_drm_encoder.c
  drm/exynos: Make exynos4/5_fimd_driver_data static
  drm/exynos: fix overlay updating issue
  drm/exynos: remove unnecessary code.
  drm/exynos: fix linux framebuffer address setting.
  drm/i915: disable cloning on sdvo

Merge misc fixes from Andrew Morton:
 "Seven fixes, some of them fingers-crossed :("

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (7 patches)
  drivers/rtc/rtc-tps65910.c: fix invalid pointer access on _remove()
  mm: soft offline: split thp at the beginning of soft_offline_page()
  mm: avoid waking kswapd for THP allocations when compaction is deferred or contended
  revert "Revert "mm: remove __GFP_NO_KSWAPD""
  mm: vmscan: fix endless loop in kswapd balancing
  mm/vmemmap: fix wrong use of virt_to_page
  mm: compaction: fix return value of capture_free_page()

Pull ARM SoC fixes from Arnd Bergmann:
 "These are three fixes for the Marvell EBU family and one for the
  Samsung s3c platforms.  All of them are obvious should still make it
  into 3.7."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: Kirkwood: Update PCI-E fixup
  Dove: Fix irq_to_pmu()
  Dove: Attempt to fix PMU/RTC interrupts
  ARM: S3C24XX: Fix potential NULL pointer dereference error

Pull ARM ixp4xx bug fixes from Arnd Bergmann:
 "These were originally prepared by Krzysztof Halasa but not submitted
  in time for v3.7 due to some confusion about how ixp4xx patches should
  be handled.  Jason Cooper thankfully offered to help out sending the
  patches upstream through arm-soc now, but given the timing, we could
  as well delay them for 3.8."

* tag 'ixp4xx-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  IXP4xx: use __iomem for MMIO
  IXP4xx: map CPU config registers within VMALLOC region.
  IXP4xx: Always ioremap() Queue Manager MMIO region at boot.
  ixp4xx: Declare MODULE_FIRMWARE usage
  IXP4xx crypto: MOD_AES{128,192,256} already include key size.
  WAN: Remove redundant HDLC info printed by IXP4xx HSS driver.
  IXP4xx: Remove time limit for PCI TRDY to enable use of slow devices.
  IXP4xx: ixp4xx_crypto driver requires Queue Manager and NPE drivers.
  IXP4xx: HW pseudo-random generator is available on IXP45x/46x only.
  IXP4xx: Fix off-by-one bug in Goramo MultiLink platform.
  IXP4xx: Fix Goramo MultiLink platform compilation.

Pull final ARM fix from Russell King:
 "One final fix, spotted by Will, to do with what happens when we boot a
  SMP kernel on UP."

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7586/1: sp804: set cpumask to cpu_possible_mask for clock event device

The tps65910_rtc data is registered as the platform driver data in
_probe(= ).  Therefore the tps65910_rtc should be used on unregistering
the rtc device.  And device pointer should be retrieved from the
platform_device structure.

This patch fixes the below oops:

 Unable to handle kernel NULL pointer dereference at virtual address 00000008
 Modules linked in: rtc_tps65910(-)
 CPU: 0    Not tainted  (3.7.0-rc7-next-20121128-g6b1f974-dirty #7)
 PC is at tps65910_rtc_alarm_irq_enable+0x20/0x2c [rtc_tps65910]
     (tps65910_rtc_alarm_irq_enable+0x20/0x2c [rtc_tps65910])
     (tps65910_rtc_remove+0x18/0x28 [rtc_tps65910])
     (platform_drv_remove+0x18/0x1c)
     (__device_release_driver+0x70/0xcc)
     (driver_detach+0xb4/0xb8)
     (bus_remove_driver+0x7c/0xc0)
     (sys_delete_module+0x148/0x21c)
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When we try to soft-offline a thp tail page, put_page() is called on the
tail page unthinkingly and VM_BUG_ON is triggered in put_compound_page().

This patch splits thp before going into the main body of soft-offlining.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With "mm: vmscan: scale number of pages reclaimed by reclaim/compaction
based on failures" reverted, Zdenek Kabelac reported the following

  Hmm,  so it's just took longer to hit the problem and observe
  kswapd0 spinning on my CPU again - it's not as endless like before -
  but still it easily eats minutes - it helps to turn off  Firefox
  or TB  (memory hungry apps) so kswapd0 stops soon - and restart
  those apps again.  (And I still have like >1GB of cached memory)

  kswapd0         R  running task        0    30      2 0x00000000
  Call Trace:
    preempt_schedule+0x42/0x60
    _raw_spin_unlock+0x55/0x60
    put_super+0x31/0x40
    drop_super+0x22/0x30
    prune_super+0x149/0x1b0
    shrink_slab+0xba/0x510

The sysrq+m indicates the system has no swap so it'll never reclaim
anonymous pages as part of reclaim/compaction.  That is one part of the
problem but not the root cause as file-backed pages could also be
reclaimed.

The likely underlying problem is that kswapd is woken up or kept awake
for each THP allocation request in the page allocator slow path.

If compaction fails for the requesting process then compaction will be
deferred for a time and direct reclaim is avoided.  However, if there
are a storm of THP requests that are simply rejected, it will still be
the the case that kswapd is awake for a prolonged period of time as
pgdat->kswapd_max_order is updated each time.  This is noticed by the
main kswapd() loop and it will not call kswapd_try_to_sleep().  Instead
it will loopp, shrinking a small number of pages and calling
shrink_slab() on each iteration.

This patch defers when kswapd gets woken up for THP allocations.  For
!THP allocations, kswapd is always woken up.  For THP allocations,
kswapd is woken up iff the process is willing to enter into direct
reclaim/compaction.

[akpm@linux-foundation.org: fix typo in comment]
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: Zdenek Kabelac <zkabelac@redhat.com>
Cc: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Robert Jennings <rcj@linux.vnet.ibm.com>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Glauber Costa <glommer@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It apepars that this patch was innocent, and we hope that "mm: avoid
waking kswapd for THP allocations when compaction is deferred or
contended" will fix the final kswapd-spinning cause.

Cc: Zdenek Kabelac <zkabelac@redhat.com>
Cc: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Robert Jennings <rcj@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Kswapd does not in all places have the same criteria for a balanced
zone.  Zones are only being reclaimed when their high watermark is
breached, but compaction checks loop over the zonelist again when the
zone does not meet the low watermark plus two times the size of the
allocation.  This gets kswapd stuck in an endless loop over a small
zone, like the DMA zone, where the high watermark is smaller than the
compaction requirement.

Add a function, zone_balanced(), that checks the watermark, and, for
higher order allocations, if compaction has enough free memory.  Then
use it uniformly to check for balanced zones.

This makes sure that when the compaction watermark is not met, at least
reclaim happens and progress is made - or the zone is declared
unreclaimable at some point and skipped entirely.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reported-by: NGeorge Spelvin <linux@horizon.com>
Reported-by: NJohannes Hirte <johannes.hirte@fem.tu-ilmenau.de>
Reported-by: NTomas Racek <tracek@redhat.com>
Tested-by: NJohannes Hirte <johannes.hirte@fem.tu-ilmenau.de>
Reviewed-by: NRik van Riel <riel@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I enable CONFIG_DEBUG_VIRTUAL and CONFIG_SPARSEMEM_VMEMMAP, when doing
memory hotremove, there is a kernel BUG at arch/x86/mm/physaddr.c:20.

It is caused by free_section_usemap()->virt_to_page(), virt_to_page() is
only used for kernel direct mapping address, but sparse-vmemmap uses
vmemmap address, so it is going wrong here.

  ------------[ cut here ]------------
  kernel BUG at arch/x86/mm/physaddr.c:20!
  invalid opcode: 0000 [#1] SMP
  Modules linked in: acpihp_drv acpihp_slot edd cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq mperf fuse vfat fat loop dm_mod coretemp kvm crc32c_intel ipv6 ixgbe igb iTCO_wdt i7core_edac edac_core pcspkr iTCO_vendor_support ioatdma microcode joydev sr_mod i2c_i801 dca lpc_ich mfd_core mdio tpm_tis i2c_core hid_generic tpm cdrom sg tpm_bios rtc_cmos button ext3 jbd mbcache usbhid hid uhci_hcd ehci_hcd usbcore usb_common sd_mod crc_t10dif processor thermal_sys hwmon scsi_dh_alua scsi_dh_hp_sw scsi_dh_rdac scsi_dh_emc scsi_dh ata_generic ata_piix libata megaraid_sas scsi_mod
  CPU 39
  Pid: 6454, comm: sh Not tainted 3.7.0-rc1-acpihp-final+ #45 QCI QSSC-S4R/QSSC-S4R
  RIP: 0010:[<ffffffff8103c908>]  [<ffffffff8103c908>] __phys_addr+0x88/0x90
  RSP: 0018:ffff8804440d7c08  EFLAGS: 00010006
  RAX: 0000000000000006 RBX: ffffea0012000000 RCX: 000000000000002c
  ...
Signed-off-by: NJianguo Wu <wujianguo@huawei.com>
Signed-off-by: NJiang Liu <jiang.liu@huawei.com>
Reviewd-by: NWen Congyang <wency@cn.fujitsu.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit ef6c5be6 ("fix incorrect NR_FREE_PAGES accounting (appears
like memory leak)") fixes a NR_FREE_PAGE accounting leak but missed the
return value which was also missed by this reviewer until today.

That return value is used by compaction when adding pages to a list of
isolated free pages and without this follow-up fix, there is a risk of
free list corruption.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'v3.7-samsung-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes

From Kukjin Kim <kgene.kim@samsung.com>:

Samsung fixes for v3.7

* 'v3.7-samsung-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S3C24XX: Fix potential NULL pointer dereference error

This would have been ok to delay to 3.8 according to Kukjin, but since
it's an obvious bug fix and a potential NULL pointer dereference, it
seem appropriate for a late 3.7 submission.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Pull networking fixes from David Miller:
 "Some more fixes trickled in over the past few days:

   1) PIM device names can overflow the IFNAMSIZ buffer unless we
      properly limit the allowed indexes, fix from Eric Dumazet.

   2) Under heavy load we can OOPS in icmp reply processing due to an
      unchecked inet_putpeer() call.  Fix from Neal Cardwell.

   3) SCTP round trip calculations need to use 64-bit math to avoid
      overflows, fix from Schoch Christian.

   4) Fix a memory leak and an error return flub in SCTP and IRDA
      triggerable by userspace.  Fix from Tommi Rantala and found by the
      syscall fuzzer (trinity).

   5) MLX4 driver gives bogus size to memcpy() call, fix from Amir
      Vadai.

   6) Fix length calculation in VHOST descriptor translation, from
      Michael S Tsirkin.

   7) Ambassador ATM driver loops forever while loading firmware, fix
      from Dan Carpenter.

   8) Over MTU packets in openvswitch warn about wrong device, fix from
      Jesse Gross.

   9) Netfilter IPSET's netlink code can overrun a string buffer because
      it's not properly limited to IFNAMSIZ.  Fix from Florian Westphal.

  10) PCAN USB driver sets wrong timestamp in SKB, from Oliver Hartkopp.

  11) Make sure the RX ifindex always has a valid value in the CAN BCM
      driver, even if we haven't received a frame yet.  Fix also from
      Oliver Hartkopp."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  team: fix hw_features setup
  atm: forever loop loading ambassador firmware
  vhost: fix length for cross region descriptor
  irda: irttp: fix memory leak in irttp_open_tsap() error path
  net: qmi_wwan: add Huawei E173
  net/mlx4_en: Can set maxrate only for TC0
  sctp: Error in calculation of RTTvar
  sctp: fix -ENOMEM result with invalid user space pointer in sendto() syscall
  sctp: fix memory leak in sctp_datamsg_from_user() when copy from user space fails
  net: ipmr: limit MRT_TABLE identifiers
  ipv4: avoid passing NULL to inet_putpeer() in icmpv4_xrlim_allow()
  can: bcm: initialize ifindex for timeouts without previous frame reception
  can: peak_usb: fix hwtstamp assignment
  netfilter: ipset: fix netiface set name overflow
  openvswitch: Store flow key len if ARP opcode is not request or reply.
  openvswitch: Print device when warning about over MTU packets.

Two small openswitch fixes from Jesse Gross.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Do this in the same way bonding does. This fixed setup resolves performance
issues when using some cards with certain offloading.
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There was a forever loop introduced here when we converted this to
request_firmware() back in 2008.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NChas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

An interface name overflow fix in netfilter via Pablo Neira Ayuso.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If a single descriptor crosses a region, the
second chunk length should be decremented
by size translated so far, instead it includes
the full descriptor length.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Cleanup the memory we allocated earlier in irttp_open_tsap() when we hit
this error path. The leak goes back to at least 1da177e4
("Linux-2.6.12-rc2").

Discovered with Trinity (the syscall fuzzer).
Signed-off-by: NTommi Rantala <tt.rantala@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Huawei E173 is a QMI/wwan device which normally appear
as 12d1:1436 in Linux. The descriptors displayed in that
mode will be picked up by cdc_ether.  But the modem has
another mode with a different device ID and a slightly
different set of descriptors. This is the mode used by
Windows like this:

3Modem:      USB\VID_12D1&PID_140C&MI_00\6&3A1D2012&0&0000
Networkcard: USB\VID_12D1&PID_140C&MI_01\6&3A1D2012&0&0001
Appli.Inter: USB\VID_12D1&PID_140C&MI_02\6&3A1D2012&0&0002
PC UI Inter: USB\VID_12D1&PID_140C&MI_03\6&3A1D2012&0&0003
Reported-by: NThomas Schäfer <tschaefer@t-online.de>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Had a typo in memcpy.
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The calculation of RTTVAR involves the subtraction of two unsigned
numbers which
may causes rollover and results in very high values of RTTVAR when RTT > SRTT.
With this patch it is possible to set RTOmin = 1 to get the minimum of RTO at
4 times the clock granularity.

Change Notes:

v2)
        *Replaced abs() by abs64() and long by __s64, changed patch
description.
Signed-off-by: NChristian Schoch <e0326715@student.tuwien.ac.at>
CC: Vlad Yasevich <vyasevich@gmail.com>
CC: Sridhar Samudrala <sri@us.ibm.com>
CC: Neil Horman <nhorman@tuxdriver.com>
CC: linux-sctp@vger.kernel.org
Acked-by: NVlad Yasevich <vyasevich@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Consider the following program, that sets the second argument to the
sendto() syscall incorrectly:

 #include <string.h>
 #include <arpa/inet.h>
 #include <sys/socket.h>

 int main(void)
 {
         int fd;
         struct sockaddr_in sa;

         fd = socket(AF_INET, SOCK_STREAM, 132 /*IPPROTO_SCTP*/);
         if (fd < 0)
                 return 1;

         memset(&sa, 0, sizeof(sa));
         sa.sin_family = AF_INET;
         sa.sin_addr.s_addr = inet_addr("127.0.0.1");
         sa.sin_port = htons(11111);

         sendto(fd, NULL, 1, 0, (struct sockaddr *)&sa, sizeof(sa));

         return 0;
 }

We get -ENOMEM:

 $ strace -e sendto ./demo
 sendto(3, NULL, 1, 0, {sa_family=AF_INET, sin_port=htons(11111), sin_addr=inet_addr("127.0.0.1")}, 16) = -1 ENOMEM (Cannot allocate memory)

Propagate the error code from sctp_user_addto_chunk(), so that we will
tell user space what actually went wrong:

 $ strace -e sendto ./demo
 sendto(3, NULL, 1, 0, {sa_family=AF_INET, sin_port=htons(11111), sin_addr=inet_addr("127.0.0.1")}, 16) = -1 EFAULT (Bad address)

Noticed while running Trinity (the syscall fuzzer).
Signed-off-by: NTommi Rantala <tt.rantala@gmail.com>
Acked-by: NVlad Yasevich <vyasevich@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Trinity (the syscall fuzzer) discovered a memory leak in SCTP,
reproducible e.g. with the sendto() syscall by passing invalid
user space pointer in the second argument:

 #include <string.h>
 #include <arpa/inet.h>
 #include <sys/socket.h>

 int main(void)
 {
         int fd;
         struct sockaddr_in sa;

         fd = socket(AF_INET, SOCK_STREAM, 132 /*IPPROTO_SCTP*/);
         if (fd < 0)
                 return 1;

         memset(&sa, 0, sizeof(sa));
         sa.sin_family = AF_INET;
         sa.sin_addr.s_addr = inet_addr("127.0.0.1");
         sa.sin_port = htons(11111);

         sendto(fd, NULL, 1, 0, (struct sockaddr *)&sa, sizeof(sa));

         return 0;
 }

As far as I can tell, the leak has been around since ~2003.
Signed-off-by: NTommi Rantala <tt.rantala@gmail.com>
Acked-by: NVlad Yasevich <vyasevich@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use synchronize_sched_expedited() instead of synchronize_sched()
to improve mount speed.

This patch improves mount time from 0.500s to 0.013s for Jeff's
test-case.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Reported-and-tested-by: NJeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The SP804 driver statically initialises the cpumask of the clock event
device to be cpu_all_mask, which is derived from the compile-time
constant NR_CPUS. This breaks SMP_ON_UP systems where the interrupt
controller handling the sp804 doesn't have the irq_set_affinity callback
on the irq_chip, because the common timer code fails to identify the
device as cpu-local and ends up treating it as a broadcast device
instead.

This patch fixes the problem by using cpu_possible_mask at runtime,
which will correctly represent the possible CPUs when SMP_ON_UP is being
used.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Just a single pll/crtc regression fix.

* 'drm-fixes-3.7' of git://people.freedesktop.org/~agd5f/linux:
  radeon: fix pll/ctrc mapping on dce2 and dce3 hardware

This fix black screen on resume issue that some people are
experiencing. There is a bug in the atombios code regarding
pll/crtc mapping. The atombios code reverse the logic for
the pll and crtc mapping.

agd5f: drop unnecessary crtc id check, cc stable in case
we miss 3.7.

This fixes the root cause that was worked around by commits:
drm/radeon: allocate PPLLs from low to high
drm/radeon/dce3: switch back to old pll allocation order for discrete
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Pull media fixes from Mauro Carvalho Chehab:
 "For some media fixes:
   - dvb_usb_v2: some fixes at the core
   - Some fixes on some embedded drivers: soc_camera, adv7604, omap3isp,
     exynos/s5p
   - Several Exynos4/5 camera fixes
   - a fix at stv0900 driver
   - a few USB ID additions to detect more variants of rtl28xxu-based
     sticks"

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (25 commits)
  [media] rtl28xxu: 0ccd:00d7 TerraTec Cinergy T Stick+
  [media] rtl28xxu: 1d19:1102 Dexatek DK mini DVB-T Dongle
  [media] mt9v022: fix the V4L2_CID_EXPOSURE control
  [media] mx2_camera: fix missing unlock on error in mx2_start_streaming()
  [media] media: omap1_camera: fix const cropping related warnings
  [media] media: mx1_camera: use the default .set_crop() implementation
  [media] media: mx2_camera: fix const cropping related warnings
  [media] media: mx3_camera: fix const cropping related warnings
  [media] media: pxa_camera: fix const cropping related warnings
  [media] media: sh_mobile_ceu_camera: fix const cropping related warnings
  [media] media: sh_vou: fix const cropping related warnings
  [media] adv7604: restart STDI once if format is not found
  [media] adv7604: use presets where possible
  [media] adv7604: Replace prim_mode by mode
  [media] adv7604: cleanup references
  [media] dvb_usb_v2: switch interruptible mutex to normal
  [media] dvb_usb_v2: fix pid_filter callback error logging
  [media] exynos-gsc: change driver compatible string
  [media] omap3isp: Fix warning caused by bad subdev events operations prototypes
  [media] omap3isp: video: Fix warning caused by bad vidioc_s_crop prototype
  ...

Inki writes:
This pull request fixes minor issues and includes code cleanup.

* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: Fix potential NULL pointer dereference in exynos_drm_encoder.c
  drm/exynos: Make exynos4/5_fimd_driver_data static
  drm/exynos: fix overlay updating issue
  drm/exynos: remove unnecessary code.
  drm/exynos: fix linux framebuffer address setting.

Daniel writes:
- Unbreak mbp retina, this time with a much more fine-grained approach
   (since the previous "completely ignore edp vbt bpp value" regressed some
   machines even after fixing a bug in our dp bw code).
- Disable cloning on sdvo. It just doesn't work (yeah took us a while to
   figure out), leading to jittery outputs in the best case.
- Revert rc6 for ilk again. It seems to help a few of the gpu hang
  reporters at least, and it's definitely the best we've got.
  Head-against-the-wall-banging is still ongoing for what really breaks
  (and how we can reproduce the non-rc6 hangs and how to reproduce on
  gen4).
* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
  Revert "drm/i915: enable rc6 on ilk again"
  drm/i915: do not default to 18 bpp for eDP if missing from VBT
  drm/i915: disable cloning on sdvo

Merge misc fixes from Andrew Morton:
 "8 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (8 patches)
  futex: avoid wake_futex() for a PI futex_q
  watchdog: using u64 in get_sample_period()
  writeback: put unused inodes to LRU after writeback completion
  mm: vmscan: check for fatal signals iff the process was throttled
  Revert "mm: remove __GFP_NO_KSWAPD"
  proc: check vma->vm_file before dereferencing
  UAPI: strip the _UAPI prefix from header guards during header installation
  include/linux/bug.h: fix sparse warning related to BUILD_BUG_ON_INVALID

Pull TTY fix from Greg Kroah-Hartman:
 "Here is a single fix for a reported regression in 3.7-rc5 for the tty
  layer.  This fix has been in the linux-next tree and solves the
  reported problem.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'tty-3.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty vt: Fix a regression in command line edition

Pull MFD fixes from Samuel Ortiz:

 - A twl fix preventing a buffer overflow.

 - A wm5102 register patch fix.

 - A wm5110 error misreport fix.

 - Arizona fixes: Use the right array size when adding subdevices,
   correctly report underclocked events, synchronize register cache
   after reset.

 - A twl4030 fix for preventing the system to hang from an interrupt
   flood.

* tag 'mfd-for-linus-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: twl4030: Fix chained irq handling on resume from suspend
  mfd: arizona: Sync regcache after reset
  mfd: arizona: Correctly report when AIF2/AIF1 is underclocked
  mfd: arizona: Use correct array for ARRAY_SIZE in mfd_add_devices call
  mfd: wm5110: Disable control interface error report for WM5110 rev B
  mfd: wm5102: Update register patch for latest evaluation
  mfd: twl-core: Fix chip ID for the twl6030-pwm module

Pull ARM fixes from Russell King:
 "Not much here, just a couple minor/cosmetic fixes and a patch for the
  decompressor which fixes problems with modern GCC and CPUs."

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7583/1: decompressor: Enable unaligned memory access for v6 and above
  ARM: 7572/1: proc-v6.S: fix comment
  ARM: 7570/1: quiet down the non make -s output

Pull ext3 regression fix from Jan Kara:
 "Fix an ext3 regression introduced during 3.7 merge window.  It leads
  to deadlock if you stress the filesystem in the right way (luckily
  only if blocksize < pagesize)."

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  jbd: Fix lock ordering bug in journal_unmap_buffer()

Dave Jones reported a bug with futex_lock_pi() that his trinity test
exposed.  Sometime between queue_me() and taking the q.lock_ptr, the
lock_ptr became NULL, resulting in a crash.

While futex_wake() is careful to not call wake_futex() on futex_q's with
a pi_state or an rt_waiter (which are either waiting for a
futex_unlock_pi() or a PI futex_requeue()), futex_wake_op() and
futex_requeue() do not perform the same test.

Update futex_wake_op() and futex_requeue() to test for q.pi_state and
q.rt_waiter and abort with -EINVAL if detected.  To ensure any future
breakage is caught, add a WARN() to wake_futex() if the same condition
is true.

This fix has seen 3 hours of testing with "trinity -c futex" on an
x86_64 VM with 4 CPUS.

[akpm@linux-foundation.org: tidy up the WARN()]
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
Reported-by: NDave Jones <davej@redat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: John Kacur <jkacur@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In get_sample_period(), unsigned long is not enough:

  watchdog_thresh * 2 * (NSEC_PER_SEC / 5)

case1:
  watchdog_thresh is 10 by default, the sample value will be: 0xEE6B2800

case2:
 set watchdog_thresh is 20, the sample value will be: 0x1 DCD6 5000

In case2, we need use u64 to express the sample period.  Otherwise,
changing the threshold thru proc often can not be successful.
Signed-off-by: Nliu chuansheng <chuansheng.liu@intel.com>
Acked-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>