- 22 11月, 2009 13 次提交
-
-
由 Michael S. Tsirkin 提交于
On error, suggest installing static libraries along with shared libraries. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091122131311.GA24318@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Michael S. Tsirkin 提交于
Make standard error show up on console when V=2 is set. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091122112726.GC13644@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Fix: ERROR: "perf_swevent_put_recursion_context" [fs/ext4/ext4.ko] undefined! ERROR: "perf_swevent_get_recursion_context" [fs/ext4/ext4.ko] undefined! Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Jason Baron <jbaron@redhat.com> LKML-Reference: <1258864015-10579-1-git-send-email-fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Pekka Enberg 提交于
The write_event() function in builtin-record.c writes out all mmap()'d DSOs including non-ELF files like GNOME resource files and such. Therefore, check for ELF_K_ELF in filename__read_build_id() before attempting to read the ELF header with gelf_getehdr(). Fixes the following error messages when running "perf kmem record": penberg@penberg-laptop:~/src/linux/tools/perf$ perf kmem record ^C[ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.753 MB perf.data (~32885 samples) ] filename__read_build_id: cannot get elf header. filename__read_build_id: cannot get elf header. filename__read_build_id: cannot get elf header. filename__read_build_id: cannot get elf header. filename__read_build_id: cannot get elf header. filename__read_build_id: cannot get elf header. filename__read_build_id: cannot get elf header. filename__read_build_id: cannot get elf header. filename__read_build_id: cannot get elf header. Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1258885784-11709-1-git-send-email-penberg@cs.helsinki.fi> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Pekka Enberg 提交于
This patch adds support for "--sort hit" and "--sort frag" to the "perf kmem" tool. The former was already mentioned in the help text and the latter is useful for finding call-sites that exhibit worst case behavior for SLAB allocators. Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: linux-mm@kvack.org <linux-mm@kvack.org> LKML-Reference: <1258883880-7149-1-git-send-email-penberg@cs.helsinki.fi> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Márton Németh 提交于
The buffer is first zeroed out by memset(). Then strncpy() is used to fill the content. The strncpy() function also pads the string till the end of the specified length, which is redundant. The strncpy() does not ensures that the string will be properly closed with 0. Use strlcpy() instead. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression buffer; expression size; expression str; @@ memset(buffer, 0, size); ... - strncpy( + strlcpy( buffer, str, sizeof(buffer) ); @@ expression buffer; expression size; expression str; @@ memset(&buffer, 0, size); ... - strncpy( + strlcpy( &buffer, str, sizeof(buffer)); @@ expression buffer; identifier field; expression size; expression str; @@ memset(buffer, 0, size); ... - strncpy( + strlcpy( buffer->field, str, sizeof(buffer->field) ); @@ expression buffer; identifier field; expression size; expression str; @@ memset(&buffer, 0, size); ... - strncpy( + strlcpy( buffer.field, str, sizeof(buffer.field)); // </smpl> On strncpy() vs strlcpy() see http://www.gratisoft.us/todd/papers/strlcpy.html . Signed-off-by: NMárton Németh <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <4B086547.5040100@freemail.hu> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Frederic Weisbecker 提交于
So that we can include this header from userspace tools, like perf tools, to get the breakpoint types and len definitions. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Prasad <prasad@linux.vnet.ibm.com> LKML-Reference: <1258863695-10464-4-git-send-email-fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Frederic Weisbecker 提交于
Remove asm/processor.h and asm/debugreg.h as these headers are not used anymore in the hw-breakpoints core file. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Prasad <prasad@linux.vnet.ibm.com> LKML-Reference: <1258863695-10464-3-git-send-email-fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Frederic Weisbecker 提交于
We are never in an NMI context when we commit a syscall trace to perf. So just forget about the nmi buffer there. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jason Baron <jbaron@redhat.com> LKML-Reference: <1258863695-10464-2-git-send-email-fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Frederic Weisbecker 提交于
When we commit a trace to perf, we first check if we are recursing in the same buffer so that we don't mess-up the buffer with a recursing trace. But later on, we do the same check from perf to avoid commit recursion. The recursion check is desired early before we touch the buffer but we want to do this check only once. Then export the recursion protection from perf and use it from the trace events before submitting a trace. v2: Put appropriate Reported-by tag Reported-by: NPeter Zijlstra <peterz@infradead.org> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Jason Baron <jbaron@redhat.com> LKML-Reference: <1258864015-10579-1-git-send-email-fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnaldo Carvalho de Melo 提交于
It better propagate errors, also if we do a simple: [root@doppio linux-2.6-tip]# perf record -R -a -f sleep 3s ; perf trace [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.182 MB perf.data (~7972 samples) ] Fatal: not an trace data file [root@doppio linux-2.6-tip]# That is what is expected, right? I.e. as we didn't specify any tracepoint event via -e, it should gracefully bail out and not SEGFAULT. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1258821086-11521-3-git-send-email-acme@infradead.org> [ Fixed the error messages some more ] Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1258821086-11521-2-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnaldo Carvalho de Melo 提交于
We better call this routine after both the kernel and modules are loaded, because as it was if there weren't modules it would not be called, resulting in kernel_map->end remaining at zero, so no map would be found and consequently the kernel symtab wouldn't get loaded, i.e. no kernel symbols would be resolved. Also this fixes another case, that is when we _have_ modules, but the last map would have its ->end address not set before we loaded its symbols, which would never happen because ->end was not set. Reported-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1258821086-11521-1-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 21 11月, 2009 23 次提交
-
-
由 Stephane Eranian 提交于
This patch fixes the default watermark value for the sampling buffer. With the existing calculation (watermark = max(PAGE_SIZE, max_size / 2)), no notification was ever received when the buffer was exactly 1 page. This was because you would never cross the threshold (there is no partial samples). In certain configuration, there was no possibilty detecting the problem because there was not enough space left to store the LOST record.In fact, there may be a more generic problem here. The kernel should ensure that there is alaways enough space to store one LOST record. This patch sets the default watermark to half the buffer size. With such limit, we are guaranteed to get a notification even with a single page buffer assuming no sample is bigger than a page. Signed-off-by: NStephane Eranian <eranian@gmail.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212509.344964101@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu> LKML-Reference: <1256302576-6169-1-git-send-email-eranian@gmail.com>
-
由 Peter Zijlstra 提交于
We should hold event->child_mutex when iterating the inherited counters, we should hold ctx->mutex when iterating siblings. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212509.251030114@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Properly account the full hierarchy of counters for both the count (we already did so) and the scale times (new). Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212509.153379276@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Most sites updating ctx->time and event times do so under ctx->lock, make sure they all do. This was made possible by removing the __perf_event_read() call from __perf_event_sync_stat(), which already had this lock taken. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212509.102316434@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
cpuctx is always active, task context is always active for current the previous condition verifies that if its a task context its for current, hence we can assume ctx->is_active. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212509.000272254@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Removes constraints from __perf_event_read() by leaving it with a single callsite; this callsite had ctx->lock held, the other one does not. Removes some superfluous code from __perf_event_sync_stat(). Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212508.918544317@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Both callers actually have IRQs disabled, no need doing so again. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212508.863685796@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Remove an update_context_time() call from the perf_event_task_sched_out() path and into the branch its needed. The call was both superfluous, because __perf_event_sched_out() already does it, and wrong, because it was done without holding ctx->lock. Place it in perf_event_sync_stat(), which is the only place it is needed and which does already hold ctx->lock. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212508.779516394@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
As Corey reported, the total_enabled and total_running times could occasionally be 0, even though there were events counted. It turns out this is because we record the times before reading the counter while the latter updates the times. This patch corrects that. While looking at this code I found that there is a lot of locking iffyness around, the following patches correct most of that. Reported-by: NCorey Ashford <cjashfor@linux.vnet.ibm.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212508.685559857@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Remove a rcu_read_{,un}lock() pair and a few conditionals. We can remove the rcu_read_lock() by increasing the scope of one in the calling function. We can do away with the system_state check if the machine still boots after this patch (seems to be the case). We can do away with the list_empty() check because the bare list_for_each_entry_rcu() reduces to that now that we've removed everything else. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212508.606459548@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Remove a rcu_read_{,un}lock() pair and a few conditionals. We can remove the rcu_read_lock() by increasing the scope of one in the calling function. We can do away with the system_state check if the machine still boots after this patch (seems to be the case). We can do away with the list_empty() check because the bare list_for_each_entry_rcu() reduces to that now that we've removed everything else. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212508.527608793@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Remove a rcu_read_{,un}lock() pair and a few conditionals. We can remove the rcu_read_lock() by increasing the scope of one in the calling function. We can do away with the system_state check if the machine still boots after this patch (seems to be the case). We can do away with the list_empty() check because the bare list_for_each_entry_rcu() reduces to that now that we've removed everything else. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212508.452227115@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Remove a rcu_read_{,un}lock() pair and a few conditionals. We can remove the rcu_read_lock() by increasing the scope of one in the calling function. We can do away with the system_state check if the machine still boots after this patch (seems to be the case). We can do away with the list_empty() check because the bare list_for_each_entry_rcu() reduces to that now that we've removed everything else. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212508.378188589@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Avoid the rather expensive perf_swevent_set_period() if we know we have to sample every single event anyway. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212508.299508332@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
in-kernel perf users might wish to have custom actions on the sample interrupt. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212508.222339539@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnaldo Carvalho de Melo 提交于
So that the user have a clearer indication about the source of the symbols, as we only state buildid mismatches in verbose mode, because 'perf top' would overwrite such warning anyway. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1258757489-5978-6-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnaldo Carvalho de Melo 提交于
E.g.: [root@doppio linux-2.6-tip]# perf top -v --vmlinux ../build/tip/vmlinux > /dev/null build_id in vmlinux is e96699725a47413a50c231864a8e7a8ced40a31b while expected is 18e7cc53db62a7d35e9d6f6c9ddc23017d38ee9a, ignoring it I.e. perf top was told to use a vmlinux file that is not the one currently running on the machine, it ignores it and falls back to using /proc/kallsyms. This solves many, at first, mysterious results when people have a stale vmlinux file while keeping the default of trying to use the vmlinux file in the current directory in things like 'perf annotate' where the DWARF info is required and thus we can't use just /proc/kallsyms. Modules buildids are already being checked as of the previous changeset in this series, because we are using the default dso__load routine, that will look at a series of places looking for the best file with a matching buildid, starting in the -debuginfo directories. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1258757489-5978-5-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnaldo Carvalho de Melo 提交于
Just like we do with the other DSOs. This also simplifies the kernel_maps setup process, now all that the tools need to do is to call kernel_maps__init and the maps for the modules and kernel will be created, then, later, when kernel_maps__find_symbol() is used, it will also call maps__find_symbol that already checks if the symtab was loaded, loading it if needed. Now if one does 'perf top --hide_kernel_symbols' we won't pay the price of loading the (many) symbols in /proc/kallsyms or vmlinux. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1258757489-5978-4-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnaldo Carvalho de Melo 提交于
Will be used in more places. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1258757489-5978-3-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnaldo Carvalho de Melo 提交于
In the kernel we have more than one notes section, so the linker script combines all and puts them into a ".notes" combined section. So we need to look at both sections and also traverse them looking at multiple GElf_Nhdr entries till we find the one we want, with the build_id. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1258757489-5978-2-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnaldo Carvalho de Melo 提交于
It should just load kernel symbols, not load the list of modules. There are more stuff to move to other routines, but lets do it in several steps. End goal is to be able to defer symbol table loading till we find a hit for that map address range. So that the kernel & modules are handled just like all the other DSOs in the system. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1258757489-5978-1-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Conflicts: arch/x86/kernel/kprobes.c kernel/trace/Makefile Merge reason: hw-breakpoints perf integration is looking good in testing and in reviews, plus conflicts are mounting up - so merge & resolve. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Conflicts: tools/perf/util/symbol.c Merge reason: this fix will get merged in .33, not .32, plus resolve the conflict. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 20 11月, 2009 4 次提交
-
-
由 Li Zefan 提交于
This tool is mostly a perf version of kmemtrace-user. The following information is provided by this tool: - the total amount of memory allocated and fragmentation per call-site - the total amount of memory allocated and fragmentation per allocation - total memory allocated and fragmentation in the collected dataset - ... Sample output: # ./perf kmem record ^C # ./perf kmem --stat caller --stat alloc -l 10 ------------------------------------------------------------------------------ Callsite | Total_alloc/Per | Total_req/Per | Hit | Fragmentation ------------------------------------------------------------------------------ 0xc052f37a | 790528/4096 | 790528/4096 | 193 | 0.000% 0xc0541d70 | 524288/4096 | 524288/4096 | 128 | 0.000% 0xc051cc68 | 481600/200 | 481600/200 | 2408 | 0.000% 0xc0572623 | 297444/676 | 297440/676 | 440 | 0.001% 0xc05399f1 | 73476/164 | 73472/164 | 448 | 0.005% 0xc05243bf | 51456/256 | 51456/256 | 201 | 0.000% 0xc0730d0e | 31844/497 | 31808/497 | 64 | 0.113% 0xc0734c4e | 17152/256 | 17152/256 | 67 | 0.000% 0xc0541a6d | 16384/128 | 16384/128 | 128 | 0.000% 0xc059c217 | 13120/40 | 13120/40 | 328 | 0.000% 0xc0501ee6 | 11264/88 | 11264/88 | 128 | 0.000% 0xc04daef0 | 7504/682 | 7128/648 | 11 | 5.011% 0xc04e14a3 | 4216/191 | 4216/191 | 22 | 0.000% 0xc05041ca | 3524/44 | 3520/44 | 80 | 0.114% 0xc0734fa3 | 2104/701 | 1620/540 | 3 | 23.004% 0xc05ec9f1 | 2024/289 | 2016/288 | 7 | 0.395% 0xc06a1999 | 1792/256 | 1792/256 | 7 | 0.000% 0xc0463b9a | 1584/144 | 1584/144 | 11 | 0.000% 0xc0541eb0 | 1024/16 | 1024/16 | 64 | 0.000% 0xc06a19ac | 896/128 | 896/128 | 7 | 0.000% 0xc05721c0 | 772/12 | 768/12 | 64 | 0.518% 0xc054d1e6 | 288/57 | 280/56 | 5 | 2.778% 0xc04b562e | 157/31 | 154/30 | 5 | 1.911% 0xc04b536f | 80/16 | 80/16 | 5 | 0.000% 0xc05855a0 | 64/64 | 36/36 | 1 | 43.750% ------------------------------------------------------------------------------ ------------------------------------------------------------------------------ Alloc Ptr | Total_alloc/Per | Total_req/Per | Hit | Fragmentation ------------------------------------------------------------------------------ 0xda884000 | 1052672/4096 | 1052672/4096 | 257 | 0.000% 0xda886000 | 262144/4096 | 262144/4096 | 64 | 0.000% 0xf60c7c00 | 16512/128 | 16512/128 | 129 | 0.000% 0xf59a4118 | 13120/40 | 13120/40 | 328 | 0.000% 0xdfd4b2c0 | 11264/88 | 11264/88 | 128 | 0.000% 0xf5274600 | 7680/256 | 7680/256 | 30 | 0.000% 0xe8395000 | 5948/594 | 5464/546 | 10 | 8.137% 0xe59c3c00 | 5748/479 | 5712/476 | 12 | 0.626% 0xf4cd1a80 | 3524/44 | 3520/44 | 80 | 0.114% 0xe5bd1600 | 2892/482 | 2856/476 | 6 | 1.245% ... | ... | ... | ... | ... ------------------------------------------------------------------------------ SUMMARY ======= Total bytes requested: 2333626 Total bytes allocated: 2353712 Total bytes wasted on internal fragmentation: 20086 Internal fragmentation: 0.853375% TODO: - show sym+offset in 'callsite' column - show cross node allocation stats - collect more useful stats? - ... Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Acked-by: NPekka Enberg <penberg@cs.helsinki.fi> Acked-by: NPeter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: linux-mm@kvack.org <linux-mm@kvack.org> LKML-Reference: <4B064AF5.9060208@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Masami Hiramatsu 提交于
Since some instructions are not decoded correctly by older versions of objdump, it may cause false positive error in insn decoder posttest. This changes build error of insn decoder test to build warning. Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> LKML-Reference: <20091116230631.5250.41579.stgit@harusame> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnaldo Carvalho de Melo 提交于
Propagate the error, that, interestingly, are already handled by all callers :-) Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1258649757-17554-3-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnaldo Carvalho de Melo 提交于
This time in perf_header__adds_write, propagating the do_write error returns. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1258649757-17554-2-git-send-email-acme@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-