- 12 10月, 2007 10 次提交
-
-
由 Ilpo Järvinen 提交于
This addition of lost_retrans_low to tcp_sock might be unnecessary, it's not clear how often lost_retrans worker is executed when there wasn't work to do. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Detection implemented with lost_retrans must work also when fastpath is taken, yet most of the queue is skipped including (very likely) those retransmitted skb's we're interested in. This problem appeared when the hints got added, which removed a need to always walk over the whole write queue head. Therefore decicion for the lost_retrans worker loop entry must be separated from the sacktag processing more than it was necessary before. It turns out to be problematic to optimize the worker loop very heavily because ack_seqs of skb may have a number of discontinuity points. Maybe similar approach as currently is implemented could be attempted but that's becoming more and more complex because the trend is towards less skb walking in sacktag marker. Trying a simple work until all rexmitted skbs heve been processed approach. Maybe after(highest_sack_end_seq, tp->high_seq) checking is not sufficiently accurate and causes entry too often in no-work-to-do cases. Since that's not known, I've separated solution to that from this patch. Noticed because of report against a related problem from TAKANO Ryousei <takano@axe-inc.co.jp>. He also provided a patch to that part of the problem. This patch includes solution to it (though this patch has to use somewhat different placement). TAKANO's description and patch is available here: http://marc.info/?l=linux-netdev&m=119149311913288&w=2 ...In short, TAKANO's problem is that end_seq the loop is using not necessarily the largest SACK block's end_seq because the current ACK may still have higher SACK blocks which are later by the loop. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Both sacked_out and fackets_out are directly known from how parameter. Since fackets_out is accurate, there's no need for recounting (sacked_out was previously unnecessarily counted in the loop anyway). Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
This is necessary for upcoming DSACK bugfix. Reduces sacktag length which is not very sad thing at all... :-) Notice that there's a need to handle out-of-mem at caller's place. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
It's on the way for future cutting of that function. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
This condition (plain R) can arise at least in recovery that is triggered after tcp_undo_loss. There isn't any reason why they should not be marked as lost, not marking makes in_flight estimator to return too large values. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
I was reading tcp_enter_loss while looking for Cedric's bug and noticed bytes_acked adjustment is missing from FRTO side. Since bytes_acked will only be used in tcp_cong_avoid, I think it's safe to assume RTO would be spurious. During FRTO cwnd will be not controlled by tcp_cong_avoid and if FRTO calls for conventional recovery, cwnd is adjusted and the result of wrong assumption is cleared from bytes_acked. If RTO was in fact spurious, we did normal ABC already and can continue without any additional adjustments. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Brian Haley 提交于
From RFC 3493, Section 5.2: IPV6_MULTICAST_IF Set the interface to use for outgoing multicast packets. The argument is the index of the interface to use. If the interface index is specified as zero, the system selects the interface (for example, by looking up the address in a routing table and using the resulting interface). This patch adds support for (index == 0) to reset the value to it's original state, allowing the system to choose the best interface. IPv4 already behaves this way. Signed-off-by: NBrian Haley <brian.haley@hp.com> Acked-by: NDavid L Stevens <dlstevens@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
The patch will add MODULE_ALIAS("ip6t_<modulename>") where missing, otherwise you will get ip6tables: No chain/target/match by that name when xt_<modulename> is not already loaded. Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jozsef Kadlecsik 提交于
With your description I could reproduce the bug and actually you were completely right: the code above is incorrect. Somehow I was able to misread RFC1122 and mixed the roles :-(: When a connection is >>closed actively<<, it MUST linger in TIME-WAIT state for a time 2xMSL (Maximum Segment Lifetime). However, it MAY >>accept<< a new SYN from the remote TCP to reopen the connection directly from TIME-WAIT state, if it: [...] The fix is as follows: if the receiver initiated an active close, then the sender may reopen the connection - otherwise try to figure out if we hold a dead connection. Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu> Tested-by: NKrzysztof Piotr Oledzki <ole@ans.pl> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 10月, 2007 30 次提交
-
-
由 David S. Miller 提交于
1) fibnl needs to be declared outside of config ifdefs, and also should not be explicitly initialized to NULL 2) nl_fib_input() args are wrong for netlink_kernel_create() input method Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pierre Ynard 提交于
As discussed before, this patch provides userland with a way to access relevant options in Router Advertisements, after they are processed and validated by the kernel. Extra options are processed in a generic way; this patch only exports RDNSS options described in RFC5006, but support to control which options are exported could be easily added. A new rtnetlink message type is defined, to transport Neighbor Discovery options, along with optional context information. At the moment only the address of the router sending an RDNSS option is included, but additional attributes may be later defined, if needed by new use cases. Signed-off-by: NPierre Ynard <linkfanel@yahoo.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
This patch make processing netlink user -> kernel messages synchronious. This change was inspired by the talk with Alexey Kuznetsov about current netlink messages processing. He says that he was badly wrong when introduced asynchronious user -> kernel communication. The call netlink_unicast is the only path to send message to the kernel netlink socket. But, unfortunately, it is also used to send data to the user. Before this change the user message has been attached to the socket queue and sk->sk_data_ready was called. The process has been blocked until all pending messages were processed. The bad thing is that this processing may occur in the arbitrary process context. This patch changes nlk->data_ready callback to get 1 skb and force packet processing right in the netlink_unicast. Kernel -> user path in netlink_unicast remains untouched. EINTR processing for in netlink_run_queue was changed. It forces rtnl_lock drop, but the process remains in the cycle until the message will be fully processed. So, there is no need to use this kludges now. Signed-off-by: NDenis V. Lunev <den@openvz.org> Acked-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
There are currently two ways to determine whether the netlink socket is a kernel one or a user one. This patch creates a single inline call for this purpose and unifies all the calls in the af_netlink.c No similar calls are found outside af_netlink.c. Signed-off-by: NDenis V. Lunev <den@openvz.org> Acked-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
netlink_sendskb does not use third argument. Clean it and save a couple of bytes. Signed-off-by: NDenis V. Lunev <den@openvz.org> Acked-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
The code in netfilter/nfnetlink.c and in ./net/netlink/genetlink.c looks like outdated copy/paste from rtnetlink.c. Push them into sync with the original. Changes from v1: - deleted comment in nfnetlink_rcv_msg by request of Patrick McHardy Signed-off-by: NDenis V. Lunev <den@openvz.org> Acked-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
There is no need to process outstanding netlink user->kernel packets during rtnl_unlock now. There is no rtnl_trylock in the rtnetlink_rcv anymore. Normal code path is the following: netlink_sendmsg netlink_unicast netlink_sendskb skb_queue_tail netlink_data_ready rtnetlink_rcv mutex_lock(&rtnl_mutex); netlink_run_queue(sk, qlen, &rtnetlink_rcv_msg); mutex_unlock(&rtnl_mutex); So, it is possible, that packets can be present in the rtnl->sk_receive_queue during rtnl_unlock, but there is no need to process them at that moment as rtnetlink_rcv for that packet is pending. Signed-off-by: NDenis V. Lunev <den@openvz.org> Acked-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tony Battersby 提交于
If kernel_accept() returns an error, it may pass back a pointer to freed memory (which the caller should ignore). Make it pass back NULL instead for better safety. Signed-off-by: NTony Battersby <tonyb@cybernetics.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Expansion of original idea from Denis V. Lunev <den@openvz.org> Add robustness and locking to the local_port_range sysctl. 1. Enforce that low < high when setting. 2. Use seqlock to ensure atomic update. The locking might seem like overkill, but there are cases where sysadmin might want to change value in the middle of a DoS attack. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Add port randomization rather than a simple fixed rover for use with SCTP. This makes it act similar to TCP, UDP, DCCP when allocating ports. No longer need port_alloc_lock as well (suggestion by Brian Haley). Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
The fourth parameter of /proc/net/psched is supposed to show the timer resultion and is used by HTB userspace to calculate the necessary burst rate. Currently we show the clock resolution, which results in a too low burst rate when the two differ. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch makes the IPv4 x->type->input functions return the next protocol instead of setting it directly. This is identical to how we do things in IPv6 and will help us merge common code on the input path. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch moves the setting of the IP length and checksum fields out of the transforms and into the xfrmX_output functions. This would help future efforts in merging the transforms themselves. It also adds an optimisation to ipcomp due to the fact that the transport offset is guaranteed to be zero. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch removes the duplicate ipv6_{auth,esp,comp}_hdr structures since they're identical to the IPv4 versions. Duplicating them would only create problems for ourselves later when we need to add things like extended sequence numbers. I've also added transport header type conversion headers for these types which are now used by the transforms. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
The IPv6 calling convention for x->mode->output is more general and could help an eventual protocol-generic x->type->output implementation. This patch adopts it for IPv4 as well and modifies the IPv4 type output functions accordingly. It also rewrites the IPv6 mac/transport header calculation to be based off the network header where practical. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch changes the calling convention so that on entry from x->mode->output and before entry into x->type->output skb->data will point to the payload instead of the IP header. This is essentially a redistribution of skb_push/skb_pull calls with the aim of minimising them on the common path of tunnel + ESP. It'll also let us use the same calling convention between IPv4 and IPv6 with the next patch. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
The beet output function completely kills any extension headers by replacing them with the IPv6 header. This is because it essentially ignores the result of ip6_find_1stfragopt by simply acting as if there aren't any extension headers. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
I pointed this out back when this patch was first proposed but it looks like it got lost along the way. The checksum only needs to be ignored for NAT-T in transport mode where we lose the original inner addresses due to NAT. With BEET the inner addresses will be intact so the checksum remains valid. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mitsuru Chinen 提交于
To judge the timing for DAD, netif_carrier_ok() is used. However, there is a possibility that dev->qdisc stays noop_qdisc even if netif_carrier_ok() returns true. In that case, DAD NS is not sent out. We need to defer the IPv6 device initialization until a valid qdisc is specified. Signed-off-by: NMitsuru Chinen <mitch@linux.vnet.ibm.com> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The unregister_netdevice() and dev_change_net_namespace() both check for dev->flags to be IFF_UP before calling the dev_close(), but the dev_close() checks for IFF_UP itself, so remove those unneeded checks. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Follows own function for each task principle, this is really somewhat separate task being done in sacktag. Also reduces indentation. In addition, added ack_seq local var to break some long lines & fixed coding style things. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Just switch to the consolidated code. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Just switch to the consolidated code Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Just switch to the consolidated code. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Just switch to the consolidated calls. ipt_recent() has to initialize the private, so use the __seq_open_private() helper. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
This concerns the ipv4 and ipv6 code mostly, but also the netlink and unix sockets. The netlink code is an example of how to use the __seq_open_private() call - it saves the net namespace on this private. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mattias Nissler 提交于
The decryption handlers will skip the frame if the RX_FLAG_DECRYPTED flag is set, so the early flag setting introduced by Johannes breaks decryption. To work around this, call the handlers first and then set the flag. Signed-off-by: NMattias Nissler <mattias.nissler@gmx.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
Problem description by Daniel Drake <dsd@gentoo.org>: "This sequence of events causes loss of connectivity: <plug in> <associate as normal in managed mode> ifconfig eth7 down iwconfig eth7 mode monitor ifconfig eth7 up ifconfig eth7 down iwconfig eth7 mode managed <associate as normal> At this point you are associated but TX does not work. This is because the eth7 hard_start_xmit is still ieee80211_monitor_start_xmit." The problem is caused by ieee80211_if_set_type checking for a non-zero hard_start_xmit pointer value in order to avoid changing that value for master devices. The fix is to make that check more explicitly linked to master devices rather than simply checking if the value has been previously set. CC: Daniel Drake <dsd@gentoo.org> Acked-by: NMichael Wu <flamingice@sourmilk.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Herbert Xu 提交于
This patch releases the lock on the state before calling x->type->output. It also adds the lock to the spots where they're currently needed. Most of those places (all except mip6) are expected to disappear with async crypto. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch adds locking so that when we're copying non-atomic fields such as life-time or coaddr to user-space we don't get a partial result. For af_key I've changed every instance of pfkey_xfrm_state2msg apart from expiration notification to include the keys and life-times. This is in-line with XFRM behaviour. The actual cases affected are: * pfkey_getspi: No change as we don't have any keys to copy. * key_notify_sa: + ADD/UPD: This wouldn't work otherwise. + DEL: It can't hurt. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-