Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256927305-4628-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

commit fce29d15
("tracing/filters: Refactor subsystem filter code")
broke system filter accidentally.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4AE810BD.3070009@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

So that we can have a quicker start on perf top and even
speedups in the other tools, as we can have maps with no hits,
so no need to load its symtabs.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256773881-4191-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Writing to stdout is probably the expected behavior because the
user explicitly asked for a list.
Signed-off-by: NMarti Raudsepp <marti@juffo.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4ebb59420ef057972167.1256603585@localhost>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Previously no indication was given about what went wrong.
Signed-off-by: NMarti Raudsepp <marti@juffo.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <03ec9ee96f17cef05424.1256603584@localhost>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Example:

Compiling the kernel with 'make -k 22 allyesconfig'

[root@emilia linux-2.6-tip]# perf top -r 90
------------------------------------------------------------------------------
   PerfTop:    3669 irqs/sec  kernel:59.9% [1000Hz cycles],  (all, 8 CPUs)
------------------------------------------------------------------------------

             samples  pcnt function                                 DSO
             _______ _____ ________________________________ ________________

             3062.00  6.5% clear_page_c                     [kernel]
             2233.00  4.8% _int_malloc                      /lib64/libc-2.5.so
             2100.00  4.5% yylex                            /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms
             2029.00  4.3% memset                           /lib64/libc-2.5.so
             1224.00  2.6% page_fault                       [kernel]
             1075.00  2.3% __GI_strlen                      /lib64/libc-2.5.so
              863.00  1.8% sub_preempt_count                [kernel]
              822.00  1.8% __GI_memcpy                      /lib64/libc-2.5.so
              810.00  1.7% __GI_vfprintf                    /lib64/libc-2.5.so
              786.00  1.7% _int_free                        /lib64/libc-2.5.so
              775.00  1.7% __GI_strcmp                      /lib64/libc-2.5.so
              748.00  1.6% _spin_lock                       [kernel]
              699.00  1.5% main                             /home/acme/git/build/allyesconfig/scripts/basic/fixdep
              659.00  1.4% add_preempt_count                [kernel]
              649.00  1.4% yyparse                          /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms
              645.00  1.4% preempt_trace                    [kernel]
              635.00  1.4% __GI___libc_free                 /lib64/libc-2.5.so
              597.00  1.3% trace_preempt_on                 [kernel]
              551.00  1.2% __GI___libc_malloc               /lib64/libc-2.5.so
              516.00  1.1% _spin_lock_irqsave               [kernel]
              481.00  1.0% copy_user_generic_string         [kernel]
              479.00  1.0% unmap_vmas                       [kernel]
              429.00  0.9% _IO_file_xsputn_internal         /lib64/libc-2.5.so
              425.00  0.9% __GI_strncpy                     /lib64/libc-2.5.so
              416.00  0.9% get_page_from_freelist           [kernel]
              414.00  0.9% malloc_consolidate               /lib64/libc-2.5.so
              406.00  0.9% get_parent_ip                    [kernel]
              362.00  0.8% __rmqueue                        [kernel]
              347.00  0.7% in_lock_functions                [kernel]
              316.00  0.7% __d_lookup                       [kernel]

[root@emilia linux-2.6-tip]#

More polishing is needed to print just DSO basename when not
--verbose, etc.

Supporting a 'comm' column requires some more reworking of 'perf
top' internals as we will need to use something like the hist
entries 'perf report' uses and will be done in another patch.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256592199-9608-3-git-send-email-acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Because we will need it in 'perf top' to support userspace
symbols for existing threads.

Now we pass a callback that will receive the synthesized event
and then write it to the output file in 'perf record' and in the
upcoming patch for 'perf top' we will just immediatelly create
the in memory representation of threads and maps.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256592199-9608-2-git-send-email-acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256592199-9608-1-git-send-email-acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

For the perf tool the patch implements an Alpha specific section
in the perf.h header file.
Signed-off-by: NMichael Cree <mcree@orcon.net.nz>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1256545926-6972-1-git-send-email-mcree@orcon.net.nz>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We were using eprintf in some places, that looks at a global
'verbose' level, and at other places passing a 'v' parameter to
specify the verbosity level, unify it by introducing
pr_{err,warning,debug,etc}, just like in the kernel.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256153646-10097-1-git-send-email-acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Wrapping the kernel headers is dangerous when it comes to arch
headers. Once we wrap asm/types.h, it will also replace the
glibc asm/types.h, not only the kernel one.

This results in build errors on some machines.

Drop this wrapper and do its work from linux/types.h wrapper,
also the glibc asm/types.h can already handle most of the type
definition it was doing (typedef __u64, __u32, etc...).

Todo: Check the others asm/*.h wrappers to prevent from other
conflicts.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
LKML-Reference: <1256246604-17156-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Currently, the callchains are displayed using a constant left
margin. So depending on the current sort dimension
configuration, callchains may appear to be well attached to the
first sort dimension column field which is mostly the case,
except when the first dimension of sorting is done by comm,
because these are right aligned.

This patch binds the callchain to the first letter in the first
column, whatever type of column it is (dso, comm, symbol).
Before:

     0.80%             perf  [k] __lock_acquire
             __lock_acquire
             lock_acquire
             |
             |--58.33%-- _spin_lock
             |          |
             |          |--28.57%-- inotify_should_send_event
             |          |          fsnotify
             |          |          __fsnotify_parent

After:

     0.80%             perf  [k] __lock_acquire
                       __lock_acquire
                       lock_acquire
                       |
                       |--58.33%-- _spin_lock
                       |          |
                       |          |--28.57%-- inotify_should_send_event
                       |          |          fsnotify
                       |          |          __fsnotify_parent

Also, for clarity, we don't put anymore the callchain as is but:

- If we have a top level ancestor in the callchain, start it
  with a first ascii hook.

  Before:

     0.80%             perf  [kernel]                        [k] __lock_acquire
                       __lock_acquire
                         lock_acquire
                       |
                       |--58.33%-- _spin_lock
                       |          |
                       |          |--28.57%-- inotify_should_send_event
                       |          |          fsnotify
                      [..]       [..]

   After:

     0.80%             perf  [kernel]                         [k] __lock_acquire
                       |
                       --- __lock_acquire
                           lock_acquire
                          |
                          |--58.33%-- _spin_lock
                          |          |
                          |          |--28.57%-- inotify_should_send_event
                          |          |          fsnotify
                         [..]       [..]

- Otherwise, if we have several top level ancestors, then
  display these like we did before:

       1.69%           Xorg
                       |
                       |--21.21%-- vread_hpet
                       |          0x7fffd85b46fc
                       |          0x7fffd85b494d
                       |          0x7f4fafb4e54d
                       |
                       |--15.15%-- exaOffscreenAlloc
                       |
                       |--9.09%-- I830WaitLpRing
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
LKML-Reference: <1256246604-17156-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

While recursively printing the branches of each callchains, we
forget to display the root. It is never printed.

Say we have:

    symbol
    f1
    f2
     |
     -------- f3
     |        f4
     |
     ---------f5
              f6

Actually we never see that, instead it displays:

    symbol
    |
    --------- f3
    |         f4
    |
    --------- f5
              f6

However f1 is always the same than "symbol" and if we are
sorting by symbols first then "symbol", f1 and f2 will be well
aligned like in the above example, so displaying f1 looks
redundant here.

But if we are sorting by something else first (dso, comm,
etc...), displaying f1 doesn't look redundant but rather
necessary because the symbol is not well aligned anymore with
its callchain:

     comm     dso        symbol
     f1
     f2
     |
     --------- [...]

And we want the callchain to be obvious.
So we fix the bug by printing the root branch, but we also
filter its first entry if we are sorting by symbols first.
Reported-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1256246604-17156-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The second argument in the strtok_r() function is not to be used
generically and can have different implementations. Currently
the function parsing of the perf trace code uses the second
argument to copy data from. This can crash the tool or just have
unpredictable results.

The correct solution is to use strsep() which has a defined
result.

I also added a check to see if the result was correct, and will
break out of the loop in case it fails to parse as expected.
Reported-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091020232034.237814877@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When using gdb to debug perf, it is practically impossible to
use when perf is compiled with -O6. For developers, this patch
adds the DEBUG feature to the make command line so that a
developer can easily remove the optimization flag.

LKML-Reference: <1255590330.8392.446.camel@twins>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091020232033.984323261@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We need to use map->unmap_ip() here too to match section
relative symbol address to the absolute address needed to match
objdump -dS addresses.
Reported-by: NMike Galbraith <efault@gmx.de>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1256061295-19835-1-git-send-email-acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

If the user doesn't pass a symbol name to annotate, it will
annotate all the symbols that have hits, in order, just like
'perf report -s comm,dso,symbol'.

This is a natural followup patch to the one that uses
output_hists to find the symbols with hits.

The common case is to annotate the first few entries at the top
of a perf report, so lets type less characters.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256058509-19678-1-git-send-email-acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We have this sym_priv_size mechanism for attaching private areas
to struct symbol entries but annotate wasn't using it, adding
private areas to struct symbol in addition to a ->priv pointer.

Scrap all that and use the sym_priv_size mechanism.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256055940-19511-1-git-send-email-acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We need this because we get section relative addresses when
reading the symtabs, but when a tool like 'perf annotate' needs
to match these address to what 'objdump -dS' produces we need
the address + section back again.

So in annotate now we look at the 'struct hist_entry' instances
(that weren't really being used) so that we iterate only over
the symbols that had some hit and get the map where that
particular hit happened so that we can get the right address to
match with annotate.

Verified that at least:

 perf annotate mmap_read_counter # Uses the ~/bin/perf binary
 perf annotate --vmlinux /home/acme/git/build/perf/vmlinux intel_pmu_enable_all

on a 'perf record perf top' session seems to work.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1255979877-12533-1-git-send-email-acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

During the Kernel Summit demo of perf/ftrace/timechart, there
was a feature request to have a process filter for timechart so
that you can zoom into one or a few processes that you are
really interested in.

This patch adds basic support for this feature, the -p
(--process) option now can select a PID or a process name to be
shown. Multiple -p options are allowed, and the combined set
will be included in the output.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091020070939.7d0fb8a7@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Merge reason: Queue up dependent patch.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

[from KS feedback]

Currently, scheduler delays are shown in a mostly transparent,
light yellow color. This color is rather hard to see on several
screens, especially projectors.

This patch changes the color of the scheduler delays to be a
much more "hard" yellow that survived the kernel summit
projector.
Reported-by: NLinus Torvalds <torvalds@osdl.org>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091020064731.20ae126a@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The timechart wakeup arrows currently show no process
information when the waker/wakee are processes that are not
actually chosen to be shown on the timechart.

This patch fixes this oversight, by looking through all
processes (after giving preference to visible processes) as well
as falling back to just showing the PID if no name for the
process can be resolved.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091020064649.0e4959b2@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Build dependencies were not properly mapped out.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1255973491-11626-1-git-send-email-acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

To cure a bunch of:

In file included from util/include/linux/bitmap.h:1,
                 from util/header.h:8,
                 from builtin-trace.c:7:
util/include/../../../../include/linux/bitmap.h:8:26: error:
linux/string.h: No such file or directory make: ***
[builtin-trace.o] Error 1 make: *** Waiting for unfinished
jobs....
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1255972296-11500-1-git-send-email-acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Count branches first, cache-misses second. The reason is that
on x86 branches are not counted by all counters on all CPUs.

Before:

 Performance counter stats for 'ls':

       0.756653  task-clock-msecs         #      0.802 CPUs
              0  context-switches         #      0.000 M/sec
              0  CPU-migrations           #      0.000 M/sec
            250  page-faults              #      0.330 M/sec
        2375725  cycles                   #   3139.781 M/sec
        1628129  instructions             #      0.685 IPC
          19643  cache-references         #     25.960 M/sec
           4608  cache-misses             #      6.090 M/sec
         342532  branches                 #    452.694 M/sec
  <not counted>  branch-misses

    0.000943356  seconds time elapsed

After:

 Performance counter stats for 'ls':

       1.056734  task-clock-msecs         #      0.859 CPUs
              0  context-switches         #      0.000 M/sec
              0  CPU-migrations           #      0.000 M/sec
            259  page-faults              #      0.245 M/sec
        3345932  cycles                   #   3166.295 M/sec
        3074090  instructions             #      0.919 IPC
         616928  branches                 #    583.806 M/sec
          39279  branch-misses            #      6.367 %
          21312  cache-references         #     20.168 M/sec
           3661  cache-misses             #      3.464 M/sec

    0.001230551  seconds time elapsed

(also prettify the printout of branch misses, in case it's
 getting scaled.)

Cc: Tim Blechmann <tim@klingt.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4ADC3975.8050109@klingt.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
---
 tools/perf/builtin-stat.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index c373683..95a55ea 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -59,6 +59,8 @@ static struct perf_event_attr default_attrs[] = {
   { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS	},
   { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES},
   { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES	},
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS},
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES	},

 };
---
 tools/perf/builtin-stat.c |   20 ++++++++++----------
 1 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index 95a55ea..90e0a26 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -50,17 +50,17 @@

 static struct perf_event_attr default_attrs[] = {

-  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK	},
-  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES},
-  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_MIGRATIONS	},
-  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_PAGE_FAULTS	},
-
-  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES	},
-  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS	},
-  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES},
-  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES	},
-  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS},
-  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES	},
+  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK		},
+  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES	},
+  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_MIGRATIONS		},
+  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_PAGE_FAULTS		},
+
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES		},
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS		},
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES	},
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES		},
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS	},
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES		},

 };

Clean up the array definition to be vertically aligned.

No functional effects.

Cc: Tim Blechmann <tim@klingt.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4ADC3975.8050109@klingt.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
---
 tools/perf/builtin-stat.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index c373683..95a55ea 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -59,6 +59,8 @@ static struct perf_event_attr default_attrs[] = {
   { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS	},
   { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES},
   { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES	},
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS},
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES	},

 };

Adds performance event information about branches
and branch misses to the default output of perf stat.
Signed-off-by: NTim Blechmann <tim@klingt.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4ADC3975.8050109@klingt.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Check for libelf headers and glibc headers separately so that
the error message correctly identifies which package
installation is missing/needed.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: paulus@samba.org
Cc: a.p.zijlstra@chello.nl
Cc: efault@gmx.de
Cc: fweisbec@gmail.com
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <4ADBCCE8.3060300@oracle.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add delay_secs sanity check to handle_keypress,
this fixes a division by zero crash.
Signed-off-by: NTim Blechmann <tim@klingt.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4AD9EBFD.106@klingt.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use DECLARE_BITMAP instead of an open coded array for our bitmap
of featured sections.

This makes the array an unsigned long instead of a u64 but since
we use a 256 bits bitmap, the array size shouldn't vary between
different boxes.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1255795038-13751-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This provides a new set of bitmasked headers. A new field is
added in the perf headers that implements a bitmap storing
optional features present in the perf.data file.

The layout can be pictured like this:

(Usual perf headers)(Features bitmap)[Feature 0][Feature
n][Feature 255]

If the bit n is set, then the feature n is used in this file.
They are all set in order. This brings a backward and forward
compatibility.

The trace_info section has moved into such optional features,
this is the first and only one for now.

This is backward compatible with the .32 file version although
it doesn't support the previous separate trace.info file.

And finally it doesn't support the current interim development
version.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1255792354-11304-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use the kernel bitmap library for internal perf tools uses.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1255792354-11304-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When we count both branches and branch-misses it is useful to
print out the percentage of branch-misses:

 # perf stat -e branches -e branch-misses /bin/true

 Performance counter stats for '/bin/true':

         401684  branches                 #      0.000 M/sec
          23301  branch-misses            #      5.801 %
Signed-off-by: NAnton Blanchard <anton@samba.org>
Cc: paulus@samba.org
Cc: a.p.zijlstra@chello.nl
LKML-Reference: <20091018112923.GQ4808@kryten>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In each case, if the NULL test on thread is needed, then the
dereference should be after the NULL test.

A simplified version of the semantic match that detects this
problem is as follows (http://coccinelle.lip6.fr/):

// <smpl>
@match exists@
expression x, E;
identifier fld;
@@

* x->fld
  ... when != \(x = E\|&x\)
* x == NULL
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
LKML-Reference: <Pine.LNX.4.64.0910170842500.9213@ask.diku.dk>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We released the first version of perf with 0.0.1 in v2.6.31,
time to double our version number to 0.0.2 ;-)

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Now that we can filter based on fields via perf record, people
will start using filter expressions and will expect them to
be obvious.

The primary way to see which fields are available is by looking
at the trace output, such as:

  gcc-18676 [000]   343.011728: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.012727: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.032692: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.033690: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.034687: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.035686: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.036684: irq_handler_entry: irq=0 handler=timer

While 'irq==0' filters work, the 'handler==<x>' filter expression
does not work:

  $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1
   Error: failed to set filter with 22 (Invalid argument)

The problem is that while an 'irq' field exists and is recognized
as a filter field - 'handler' does not exist - its name is 'name'
in the output.

To solve this, we need to synchronize the printout and the field
names, wherever possible.

In cases where the printout prints a non-field, we enclose
that information in square brackets, such as:

  perf-1380  [013]   724.903505: softirq_exit: vec=9 [action=RCU]
  perf-1380  [013]   724.904482: softirq_exit: vec=1 [action=TIMER]

This way users can use filter expressions more intuitively: all
fields that show up as 'primary' (non-bracketed) information is
filterable.

This patch harmonizes the field names for all irq, bkl, power,
sched and timer events.

We might in fact think about dropping the print format bit of
generic tracepoints altogether, and just print the fields that
are being recorded.

Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Américo Wang noticed that we have a locking imbalance in the
error paths of ftrace_profile_set_filter(), causing potential
leakage of event_mutex.

Also clean up other error codepaths related to event_mutex
while at it.

Plus fix an initialized variable in the subsystem filter code.
Reported-by: NAmérico Wang <xiyou.wangcong@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <2375c9f90910150247u5ccb8e2at58c764e385ffa490@mail.gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add a new option "--filter <filter_str>" to perf record, and
it should be right after "-e trace_point":

 #./perf record -R -f -e irq:irq_handler_entry --filter irq==18
 ^C
 # ./perf trace
            perf-4303  ... irq_handler_entry: irq=18 handler=eth0
            init-0     ... irq_handler_entry: irq=18 handler=eth0
            init-0     ... irq_handler_entry: irq=18 handler=eth0
            init-0     ... irq_handler_entry: irq=18 handler=eth0
            init-0     ... irq_handler_entry: irq=18 handler=eth0

See Documentation/trace/events.txt for the syntax of filter
expressions.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4AD6955F.90602@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- Add an ioctl to allocate a filter for a perf event.

- Free the filter when the associated perf event is to be freed.

- Do the filtering in perf_swevent_match().
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4AD69546.8050401@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>