- 10 5月, 2007 40 次提交
-
-
由 Martin Schwidefsky 提交于
Disable some configuration options in the common Kconfig files that are of no interest to a s390 machine. Enable hangcheck timer. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Disable some more menus in the configuration files that are of no interest to a s390 machine. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Add "depends on HAS_IOMEM" to a number of menus to make them disappear for s390 which does not have I/O memory. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Refine some depends statements to limit their visibility to the environments that are actually supported. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
arch/s390/mm/fault.c: In function `signal_return': arch/s390/mm/fault.c:256: warning: unused variable `compat' Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Ursula Braun 提交于
Statement has been inadvertently lost with commit 00c0c646. Signed-off-by: NUrsula Braun <braunu@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Monthly sparse warning avoidance patch. Sigh. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Cornelia Huck 提交于
Add missing export of dasd_generic_read_dev_chars(). Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
The function shouldn't have existed in the first place (not MSS-aware). Introduce a new function ccw_device_get_id() that extracts the ccw_dev_id structure of a ccw device and convert all users of _ccw_device_get_device_number to ccw_device_get_id. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
This patch fixes compilation on s390 after the removal of struct subsystem. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters IB: Put rlimit accounting struct in struct ib_umem IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules
-
由 Linus Torvalds 提交于
* 'usb-move' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: Move USB network drivers to drivers/net/usb.
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: Doc Fix: remove mention of combined mode-related kernel parameters libata: fix kernel-doc parameters Fix pata_qdi.c probe code pata_scc: fix compilation sata_via: add missing PM hooks sata_nv: fix ADMA freeze/thaw/irq_clear issues pata_pcmcia.c: add card ident for jvc cdrom sata_promise: SATAII-150/300 TX4 port numbering fix sata_promise: fix another error decode regression libata-acpi: fix _GTF command protocol for ATAPI devices
-
由 Linus Torvalds 提交于
This reverts commit 5b479c91. Quoth Neil Brown: "It causes an oops when auto-detecting raid arrays, and it doesn't seem easy to fix. The array may not be 'open' when do_md_run is called, so bdev->bd_disk might be NULL, so bd_set_size can oops. This whole approach of opening an md device before it has been assembled just seems to get more and more painful. I think I'm going to have to come up with something clever to provide both backward comparability with usage expectation, and sane integration into the rest of the kernel." Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Garzik 提交于
It is preferable to group drivers by usage (net, scsi, ATA, ...) than by bus. When reviewing drivers, the [PCI|USB|PCMCIA|...] maintainer is probably less qualified on networking issues than a networking maintainer. Also, from a practical standpoint, chips often appear on multiple buses, which is why we do not put drivers into drivers/pci/net. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jesse Barnes 提交于
Looks like you removed the combined_mode quirk (yay!) but didn't update kernel-parameters.txt... might confuse people. Here's a patch to remove mention of it from the documentation. Signed-off-by: NJesse Barnes <jesse.barnes@intel.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Randy Dunlap 提交于
Warning(linux-2.6.21-git4//drivers/ata/libata-core.c:904): No description found for parameter 'new_sectors' Warning(linux-2.6.21-git4//drivers/ata/libata-core.c:941): No description found for parameter 'new_sectors' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Samuel Thibault 提交于
There is a small typo in the probe code of pata_qdi.c, here is a patch. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
For some reason, sata_via is missing PM hooks. Add them. Spotted by Jeroen Janssen <jeroen.janssen@gmail.com>. Signed-off-by: NTejun Heo <htejun@gmail.com> Cc: Jeroen Janssen <jeroen.janssen@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Robert Hancock 提交于
This patch fixes some problems with ADMA-capable controllers with regard to freeze, thaw and irq_clear libata callbacks. Freeze and thaw didn't switch the ADMA-specific interrupts on or off, and more critically the irq_clear function didn't respect the restriction that the notifier clear registers for both ports have to be written at the same time even when only one port is being cleared. This could result in timeouts on one port when error handling (i.e. as a result of hotplug) occurred on the other port. As well, this fixes some issues in the interrupt handler: we shouldn't check any ADMA status if the port has ADMA switched off because of an ATAPI device, and it also checks to see if any ADMA interrupt has been raised even when we are in port-register mode. Signed-off-by: NRobert Hancock <hancockr@shaw.ca> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Richard Kennedy 提交于
update pata_pcmcia to add card ident for JVC MP-CDX1 cdrom drive card info: PRODID_1="KME" PRODID_2="KXLC005" PRODID_3="00" MANFID=0032,2904 Signed-off-by: NRichard Kennedy <richard@rsk.demon.co.uk> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Mikael Pettersson 提交于
There is a known problem with sata_promise on SATAII-150/300 TX4 controller cards: it enumerates drives in an order that differs from the port numbers printed on the controller cards. However, Promise's BIOS and Linux driver both get the order right. I investigated Promise's Linux driver (v1.01.0.23), and found that it explicitly changes the mapping from logical port number to ATA engine MMIO address on the SATAII TX4 cards. It does this on all SATAII TX4 cards, without inspecting revision etc. The SATAII TX2plus cards continue to use the same mapping that was used for the first-generation chips. This patch updates sata_promise to use the new port number to ATA engine mapping on SATAII TX4 cards, which fixes the drive enumeration order problem on those cards. Tested on several 1st and 2nd generation TX2plus and TX4 chips. Signed-off-by: NMikael Pettersson <mikpe@it.uu.se> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Mikael Pettersson 提交于
The sata_promise error decode update changed pdc_host_intr() to return and not complete the qc after detecting an error. Unfortunately not completing the qc:s causes them to always time out on error, which is wrong and has nasty side-effects. This patch updates pdc_error_intr() to call ata_port_abort(), similar to ahci and sata_sil24. Doing this is important as it makes EH see the original error and not a bogus timeout. Signed-off-by: NMikael Pettersson <mikpe@it.uu.se> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
_GTF command is never ATA_PROT_ATAPI_NODATA whether the device is ATAPI or not. It's always ATA_PROT_NODATA. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alexey Dobriyan 提交于
Copied from b44 driver, but it works: netconsole: device eth0 not up yet, forcing it atl1: eth0 link is up 100 Mbps full duplex netconsole: network logging started Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Paul Walmsley 提交于
Ejecting a PCMCIA IBM Token Ring card that has not had its dev->open() called will reliably trigger an uninitialized spinlock oops when spinlock debugging is enabled. The system then hangs, occasionally softlockup oopsing. Apparently ibmtr.c:tok_interrupt() doesn't expect to be called before tok_open(), but tok_interrupt() gets called anyway when the card is ejected. So, set an already-existing flag which causes tok_interrupt() to bail out early upon card ejection. Tested by inserting and removing the PCMCIA card several times. Signed-off-by: NPaul Walmsley <paul@booyaka.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
By default, the skge driver now enables wake on magic and wake on PHY. This is a bad default (bug), wake on PHY means machine will never shutdown if connected to a switch. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>a Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
Merge branch 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: ide: fix PIO setup on resume for ATAPI devices ide: legacy PCI bus order probing fixes ide: add ide_proc_register_port() ide: add "initializing" argument to ide_register_hw() ide: cable detection fixes (take 2) ide: move IDE settings handling to ide-proc.c ide: split off ioctl handling from IDE settings (v2) ide: make /proc/ide/ optional ide: add ide_tune_dma() helper ide: rework the code for selecting the best DMA transfer mode (v3) ide: fix UDMA/MWDMA/SWDMA masks (v3)
-
git://git.linux-nfs.org/pub/linux/nfs-2.6由 Linus Torvalds 提交于
* git://git.linux-nfs.org/pub/linux/nfs-2.6: NFS: Kill the obsolete NFS_PARANOIA NFS: use __set_current_state() sunrpc: fix crash in rpc_malloc() NFS: Clean up NFSv4 XDR error message NFS: NFS client underestimates how large an NFSv4 SETATTR reply can be SUNRPC: Fix pointer arithmetic bug recently introduced in rpc_malloc/free NFS: Remove redundant check in nfs_check_verifier() NFS: Fix a jiffie wraparound issue
-
PIO should be restored also for ATAPI devices during resume, fix it. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
IDE PCI host drivers should register themselves with IDE core only when IDE driver is built-in, otherwise (IDE driver is modular and thus IDE PCI host drivers are also modular) the code has no effect and just complicates the probing. Fix it by adding new config option CONFIG_IDEPCI_PCIBUS (defined only when needed and invisible to the user) and covering by #ifdef/#endif the code in question. It turned out that "ide=reverse" was silently accepted but did nothing in case when IDE driver was modular, this is fixed now. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* create_proc_ide_interfaces() tries to add /proc entries for every probed and initialized IDE port, replace it by ide_proc_register_port() which does it only for the given port (also rename destroy_proc_ide_interface() to ide_proc_unregister_port() for consistency) * convert {create,destroy}_proc_ide_interface[s]() users to use new functions * pmac driver depended on proc_ide_create() to add /proc port entries, fix it * au1xxx-ide, swarm and cs5520 drivers depended indirectly on ide-generic driver (CONFIG_IDE_GENERIC=y) to add port /proc entries, fix them * there is now no need to add /proc entries for IDE ports in proc_ide_create() so don't do it * proc_ide_create() needs now to be called before drivers are probed - fix it, while at it make proc_ide_create() create /proc "ide" directory Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Add "initializing" argument to ide_register_hw() and use it instead of ide.c wide variable of the same name. Update all users of ide_register_hw() accordingly. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Tejun's recent eighty_ninty_three() fix has inspired me to do more thorough review of the cable detection code... * print user-friendly warning about limiting the maximum transfer speed to UDMA33 (and the reason behind it) when 80-wire cable is not detected, also while at it cleanup eighty_ninty_three() a bit * use eighty_ninty_three() in ide_ata66_check(), this actually fixes 3 bugs: - bit 14 (word 93 validity check) == 1 && bit 13 (80-wire cable test) == 1 were used as 80-wire cable present test for CONFIG_IDEDMA_IVB=n case (please see FIXME comment in eighty_ninty_three() for more details) - CONFIG_IDEDMA_IVB=y/n cases were interchanged - check for SATA devices was missing * remove private cable warnings from pdc_202xx{old,new} drivers now that core code provides this functionality (plus, in pdc202xx_new case the test could give false warnings for ATAPI devices because pdc202xx_new driver doesn't even support ATAPI DMA) Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* move __ide_add_setting() ide_add_setting() __ide_remove_setting() auto_remove_settings() ide_find_setting_by_name() ide_read_setting() ide_write_setting() set_xfer_rate() ide_add_generic_settings() ide_register_subdriver() ide_unregister_subdriver() from ide.c to ide-proc.c * set_{io_32bit,pio_mode,using_dma}() cannot be marked static now, fix it * rename ide_[un]register_subdriver() to ide_proc_[un]register_driver(), update device drivers to use new names * add CONFIG_IDE_PROC_FS=n versions of ide_proc_[un]register_driver() and ide_add_generic_settings() * make ide_find_setting_by_name(), ide_{read,write}_setting() and ide_{add,remove}_proc_entries() static * cover IDE settings code in device drivers with CONFIG_IDE_PROC_FS #ifdef, also while at it cover with CONFIG_IDE_PROC_FS #ifdef ide_driver_t.proc * remove bogus comment from ide.h * cover with CONFIG_IDE_PROC_FS #ifdef .proc and .settings in ide_drive_t Besides saner code this patch results in the IDE core smaller by ~2 kB (on x86-32) and IDE disk driver by ~1 kB (ditto) when CONFIG_IDE_PROC_FS=n. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* do write permission and min/max checks in ide_procset_t functions * ide-disk.c: drive->id is always available so cleanup "multcount" setting accordingly * ide-disk.c: "address" setting was incorrectly defined as type TYPE_INTA, fix it by using type TYPE_BYTE and updating ide_drive_t->adressing field, the bug didn't trigger because this IDE setting uses custom ->set function * ide.c: add set_ksettings() for handling HDIO_SET_KEEPSETTINGS ioctl * ide.c: add set_unmaskirq() for handling HDIO_SET_UNMASKINTR ioctl * handle ioctls directly in generic_ide_ioclt() and idedisk_ioctl() instead of using IDE settings to deal with them * remove no longer needed ide_find_setting_by_ioctl() and {read,write}_ioctl fields from ide_settings_t, also remove now unused TYPE_INTA handling v2: * add missing EXPORT_SYMBOL_GPL(ide_setting_sem) needed now for ide-disk Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-