- 02 8月, 2010 27 次提交
-
-
由 Dave Airlie 提交于
This interface allows userspace to request hyperz support, it probably needs more locking, and really reporting that you can have hyperz is racy since someone else might get it before you do. v2: modify so we pass 0 valued packets to let DDX/r300c keep working. also fixed incorrect 0x4f1c reference. v3: fixup zb_bw_cntl so older drivers keep working v4: add locking, fixup SC_HYPERZ_EN - patch stream to disable hiz Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
This migrates a bunch of DRM_DEBUG->DRM_DEBUG_KMS so we can get more modesetting related info without all the other ioctl handling easily. Also the PM code moves to DRM_DEBUG_DRIVER mostly. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Rafał Miłecki 提交于
Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
We aren't using it, so no need. Save additional dwords. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
group state that is emitted sequentially into fewer packets. This saves a number of dwords. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Saves lots of dwords in blit emit Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
group state that is emitted sequentially into fewer packets. This saves a number of dwords. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Use of HDP_*_COHERENCY_FLUSH_CNTL can cause a hang in certain situations. Add workaround. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
We used to limit the rs4xx gart aperture to 32 MB, but I suspect that was due to not meeting the alignment requirements of the aperture. This patch should only be applied after: "drm/radeon/kms: fix gtt MC base alignment on rs4xx/rs690/rs740 asics" has been applied. This patch should probably soak for a bit in d-r-t. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dan Carpenter 提交于
The "error" variable is unsigned so it's never less than zero. I changed it to check if (freq < current_freq) directly. "best_error" is also unsigned so "best_error - 100" could be a large number instead of a negative. Since "error" is unsigned it is never less than a negative and so the cases where "best_error" is less than or equal to 100 are false. Signed-off-by: NDan Carpenter <error27@gmail.com> Reviewed-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
On systems using kexec, the new kernel is booted straight from the old kernel, without any warning to the graphics driver. So the GPU is basically left as-is in a running state, however the CPU side is completly reset. Without stating the saneness of anyone using kexec on live systems, we should at least try not to crash the GPU. This patch resets 3 registers to 0 that could cause bad things to happen to the running system. This allows kexec to work on a Power6/RN50 system. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Michel Dänzer 提交于
This fixes a problem where on low VRAM cards we'd run out of space for validation. [airlied: Tested on my M7, Thinkpad T42, compiz works with no problems.] Signed-off-by: NMichel Dänzer <daenzer@vmware.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
This is required for the NB_MISC regs on rs780/rs880 which means HDMI/DVI/DP ports using PCIEPHY won't work without it. It might also help with s/r (asic init) issues on other atombios cards. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=28774 and similar issues reported by Alberto Milone. [airlied: Squash io fix patch] Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Tested-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Rafał Miłecki 提交于
We will need method of selecting encoder that should receive HDMI block. For now we assign HDMI block to first enabled encoder. Hopefully there are not many RS6x0 chips with two digital encoders. [airlied: add RS740 checks as per Alex suggestion.] Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Rafał Miłecki 提交于
This is needed to enable audio support on devices using polling. In case user decides to disable audio (module parameter) we still will try to use timer in r600_audio_enable_polling. This would lead to BUG in kernel/timer.c. Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Userspace needs this information to access tiled buffers via the CPU. v2: rebased on evergreen accel changes Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Covers depth, cb, and textures. Hopefully I got this right. v2: - fix bugs: https://bugs.freedesktop.org/show_bug.cgi?id=28327 https://bugs.freedesktop.org/show_bug.cgi?id=28381 - use ALIGNED(), IS_ALIGNED() macros Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Check for relocs for DB_DEPTH_INFO, CB_COLOR*_INFO, and texture resources. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Needed for scanning out of a tiled buffer. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Needed for scanning out of a tiled buffer. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
rv6xx/rv7xx/evergreen families supported; older asics did not have an internal thermal sensor. Note, not all oems use the internal thermal sensor, so it's only exposed in cases where it is used. Note also, that most laptops use an oem specific ACPI solution for GPU thermal information rather than using the internal thermal sensor directly. v2: export millidegrees celsius, use hwmon device properly. v3: fix Kconfig Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alberto Milone 提交于
By calling the ATIF method in the radeon driver we can make sure that hotkeys such as the video switch key emit ACPI events when pressed. agd5f: fix warning Signed-off-by: NAlberto Milone <alberto.milone@canonical.com> Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Some tables have delays that can cause the timeout to hit even when not intended. Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=27744 and related bugs. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
- Make the logic in r100_pll_errata_after_index() match the other errata functions - Use rdev->family rather than rdev->flags & RADEON_FAMILY_MASK for kms - replace rn50 check using ids with ASIC_IS_RN50 convenience macro Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 22 7月, 2010 4 次提交
-
-
由 Alex Deucher 提交于
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=29062Reported-by: NAndres Cimmarusti <acimmarusti@gmail.com> Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Return the crtc_id, not the counter value. They are not necessarily the same. Cc: Jerome Glisse <glisse@freedesktop.org> Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Add delay after turning off the LVDS encoder. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=16389Tested-by: NJan Kreuzer <kontrollator@gmx.de> Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
We only add/remove crtcs at driver load, you cannot remove when the GPU is running a CS packet since the fd is open, when GPU hotplugging on radeons actually is needed all this locking needs a review and I've started re-working kms core locking to deal with this better. But for now avoid long delays in CS processing when hotplug detect is happening in a different thread. this fixes a regression introduced with hotplug detection. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 21 7月, 2010 4 次提交
-
-
由 Alex Deucher 提交于
Disables the crts as per dpms and also disables the ppll associated with the crtc. This should save additional power. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Reported-by: NAlexander Y. Fomichev <git.user@gmail.com> Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Connector is actually DVI rather than HDMI. Reported-by: NtrapDoor <trapdoor6@gmail.com> Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
This fixes a regression caused by b2ea4aa6 due to the way shared ddc with multiple digital connectors was handled. You generally have two cases where DDC lines are shared: - HDMI + VGA - HDMI + DVI-D HDMI + VGA is easy to deal with because you can check the EDID for the to see if the attached monitor is digital. A shared DDC line with two digital connectors is more complex. You can't use the hdmi bits in the EDID since they may not be there with DVI<->HDMI adapters. In this case all we can do is check the HPD pins to see which is connected as we have no way of knowing using the EDID. Reported-by: trapdoor6@gmail.com Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 20 7月, 2010 1 次提交
-
-
由 Kulikov Vasiliy 提交于
If kzalloc() fails exit with -ENOMEM. Signed-off-by: NKulikov Vasiliy <segooon@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 16 7月, 2010 1 次提交
-
-
由 Alex Deucher 提交于
The asics in question have the following requirements with regard to their gart setups: 1. The GART aperture size has to be in the form of 2^X bytes, where X is from 25 to 31 2. The GART aperture MC base has to be aligned to a boundary equal to the size of the aperture. 3. The GART page table has to be aligned to the boundary equal to the size of the table. 4. The GART page table size is: table_entry_size * (aperture_size / page_size) 5. The GART page table has to be allocated in non-paged, non-cached, contiguous system memory. This patch takes care 2. The rest should already be handled properly. This fixes a regression noticed by: Torsten Kaiser <just.for.lkml@googlemail.com> Tested-by: NTorsten Kaiser <just.for.lkml@googlemail.com> Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 14 7月, 2010 1 次提交
-
-
由 Alex Deucher 提交于
Check ulBootUpMemoryClock on AMD IGPs. Fix regression noticed by Torsten Kaiser <just.for.lkml@googlemail.com> Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 13 7月, 2010 1 次提交
-
-
由 Alex Deucher 提交于
fixes fdo bug 26915 Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 07 7月, 2010 1 次提交
-
-
由 Alex Deucher 提交于
Connectors with a shared ddc line can be connected to different encoders. Reported by Pasi Kärkkäinen <pasik@iki.fi> on dri-devel Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-