Add msm_smd device in the msm7x30 board file.
Signed-off-by: NNiranjana Vishwanathapura <nvishwan@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Add the platform data for the IOMMUs found on the Qualcomm
msm8x60 SoC.
Signed-off-by: NStepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Register a driver for the MSM IOMMU devices and a driver
for the translation context devices. Set up the global
IOMMU registers and initialize the context banks.
Signed-off-by: NStepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Add support for the IOMMUs found on the upcoming Qualcomm
MSM8x60 chips. These IOMMUs allow virtualization of the
address space used by most of the multimedia cores on these
chips.
Signed-off-by: NStepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

The MSM8X60 FFA contains different components than the MSM8X60 SURF,
and therefore requires a different ARCH type and machine ID.
Signed-off-by: NGregory Bean <gbean@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Board configuration for MSM8X60 simulation.
Signed-off-by: NSteve Muckle <smuckle@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Signed-off-by: NSteve Muckle <smuckle@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

The MSM8x60 has a different physical memory offset than other targets.
Signed-off-by: NJeff Ohlstein <johlstei@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Private Peripheral interrupts could be edge triggered or level triggered
depending on the platform. Initialize handlers for these in board file.
Signed-off-by: NAbhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Signed-off-by: NJeff Ohlstein <johlstei@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Some MSM targets don't select the debug UART in this way. For those we
need to disable this selection mechanism.
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>
Signed-off-by: NJeff Ohlstein <johlstei@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>
Signed-off-by: NJeff Ohlstein <johlstei@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Need to add this until real clock support for 8x60 goes in, or else some
drivers won't compile.
Signed-off-by: NJeff Ohlstein <johlstei@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

On RUMI platform STIs are not enabled by default, contrary to the
GIC spec. The bits for STIs in the enable/enable clear registers
are also RW instead of RO. STIs need to be enabled at initialization
time.
Signed-off-by: NSteve Muckle <smuckle@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

The existing MSM irq entry macro is specific to a VIC
implementation. Renaming this makes room for irq support based on
other interrupt controllers.
Signed-off-by: NSteve Muckle <smuckle@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Board configuration for MSM8X60 emulation on RUMI3.
Signed-off-by: NSteve Muckle <smuckle@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Signed-off-by: NJeff Ohlstein <johlstei@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Define the interrupt map in irq-8x60.h
Signed-off-by: NAbhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

IRQ assignments are different for MSM8X60 than other existing MSMs.
Signed-off-by: NSteve Muckle <smuckle@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

MSM8X60 has different IO mappings than previous MSMs.
Signed-off-by: NSteve Muckle <smuckle@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Some builds may not support the proc-comm interface with
the baseband processor.
Signed-off-by: NSteve Muckle <smuckle@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Configure the smc91x ethernet chip on the qsd8x50 SURF.
Signed-off-by: NGregory Bean <gbean@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Add gpiomux get and put calls to msmgpio request and free,
in order to allow gpio lines to be properly reference-counted
and power-managed.
Signed-off-by: NGregory Bean <gbean@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Install a gpiolib driver supporting the on-chip gpios for
single-core MSMs in the 7x00 family, including 7x00A, 7x25, 7x27,
7x30, 8x50, and 8x50a.

As part of the ongoing effort to converge on a common code base,
this driver is based on the Google-Android msmgpio driver, whose
authors include Brian Swetland and Arve Hjønnevåg.

Cc: Arve Hjønnevåg <arve@android.com>
Cc: H Hartley Sweeten <hartleys@visionengravers.com>
Cc: Ryan Mallon <ryan@bluewatersys.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NGregory Bean <gbean@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Featurize gpiomux so that systems like 7x00 which do not wish to use it
do not have to be saddled with the configuration tables.
Signed-off-by: NGregory Bean <gbean@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Now that all supported gpio_tlmm_config-using boards
are using gpiomux, remove the deprecated code.
Signed-off-by: NGregory Bean <gbean@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Change deprecated gpio_tlmm_config calls to gpiomux calls.
Signed-off-by: NGregory Bean <gbean@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Change the gpio-init code from deprecated gpio_tlmm_config
to the new gpiomux api.
Signed-off-by: NGregory Bean <gbean@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Signed-off-by: NGregory Bean <gbean@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Add the 'gpiomux' api, which addresses the following shortcomings
of existing tlmm api:

- gpio power-collapse, which is managed by a peripheral processor on
  other targets, must be managed by the application processor on the 8x60.
- The enable/disable flag of the legacy gpio_tlmm_config api
  is not applicable on the 8x60, and causes confusion.
- The gpio 'direction' bits are meaningless for all func_sel
  configurations except for generic-gpio mode (func_sel 0), in which
  case the gpio_direction_* functions should be used.  Having these
  bits in the tlmm api leads to confusion and misuse of the gpiolib
  api, and they have been removed in gpiomux.
- The functional api of the legacy system ran contrary to the typical
  use-case, which is a single massive configuration at boot.  Rather
  than forcing hundreds of 'config' function calls, the new api
  allows data to be configured with a single table.

gpiomux_get and gpiomux_put are meant to be called automatically
when gpio_request and gpio_free are called, giving automatic
gpiomux/tlmm control to those drivers/lines with simple
power profiles - in the simplest cases, an entry in the gpiomux table
and the correct usage of gpiolib is all that is required to get proper
gpio power control.
Signed-off-by: NGregory Bean <gbean@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Masking in the ack callback fails to work with handle_percpu_irq and handle_edge_irq.
The interrupt stays disabled after the first invocation since percpu and edge irq do
not unmask an interrupt after handling it. For handle_level_irq masking in the ack
is redundant because ack is always called after mask in the mask_ack function.

Masking in the ack function is required only when __do_IRQ was used instead of flow
handlers, but using __do_IRQ has been deprecated.

Remove the masking of interrupt from the ack callback.
Signed-off-by: NAbhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: NJeff Ohlstein <johlstei@codeaurora.org>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: vt6655: fix buffer overflow
  Revert: "Staging: batman-adv: Adding netfilter-bridge hooks"

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: musb: MAINTAINERS: Fix my mail address
  USB: serial/mos*: prevent reading uninitialized stack memory
  USB: otg: twl4030: fix phy initialization(v1)
  USB: EHCI: Disable langwell/penwell LPM capability
  usb: musb_debugfs: don't use the struct file private_data field with seq_files

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  serial: mfd: fix bug in serial_hsu_remove()
  serial: amba-pl010: fix set_ldisc

"param->u.wpa_associate.wpa_ie_len" comes from the user.  We should
check it so that the copy_from_user() doesn't overflow the buffer.

Also further down in the function, we assume that if
"param->u.wpa_associate.wpa_ie_len" is set then "abyWPAIE[0]" is
initialized.  To make that work, I changed the test here to say that if
"wpa_ie_len" is set then "wpa_ie" has to be a valid pointer or we return
-EINVAL.

Oddly, we only use the first element of the abyWPAIE[] array.  So I
suspect there may be some other issues in this function.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This reverts commit 96d592ed.

The netfilter hook seems to be misused and may leak skbs in situations
when NF_HOOK returns NF_STOLEN. It may not filter everything as
expected. Also the ethernet bridge tables are not yet capable to
understand batman-adv packet correctly.

It was only added for testing purposes and can be removed again.
Reported-by: NVasiliy Kulikov <segooon@gmail.com>
Signed-off-by: NSven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Medfield HSU driver deal with 4 pci devices(3 uart ports + 1 dma controller),
so in pci remove func, we need handle them differently
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Commit d87d9b7d ("tty: serial - fix tty referencing in set_ldisc") changed
set_ldisc to take ldisc number as parameter. This patch fixes AMBA PL010 driver
according the new prototype.
Signed-off-by: NMika Westerberg <mika.westerberg@iki.fi>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

If we don't, contributors to musb and any USB OMAP
code will be sending mails to an unexistent inbox.
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>