- 09 5月, 2009 19 次提交
-
-
由 Joel Becker 提交于
ocfs2 was hand-calling vfs_follow_link(), but there's no point to that. Let's use page_follow_link_light() and nd_set_link(). Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
forgot to unlock superblock before calling deactivate_super()... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Does equivalent of up_write(&s->s_umount); deactivate_super(s); However, it does not does not unlock it until it's all over. As the result, it's safe to use to dispose of new superblock on ->get_sb() failure exits - nobody will see the sucker until it's all over. Equivalent using up_write/deactivate_super is safe for that purpose if superblock is either safe to use or has NULL ->s_root when we unlock. Normally filesystems take the required precautions, but a) we do have bugs in that area in some of them. b) up_write/deactivate_super sequence is extremely common, so the helper makes sense anyway. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Jeff Mahoney 提交于
With Al Viro's patch to move privroot lookup to fs mount, there's no need to have special code to hide the privroot in reiserfs_lookup. I've also cleaned up the privroot hiding in reiserfs_readdir_dentry and removed the last user of reiserfs_xattrs(). Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Jeff Mahoney 提交于
The security.* xattrs are ignored for xattr files, so don't create them. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Jeff Mahoney 提交于
The xattr_root caching was broken from my previous patch set. It wouldn't cause corruption, but could cause decreased performance due to allocating a larger chunk of the journal (~ 27 blocks) than it would actually use. This patch loads the xattr root dentry at xattr initialization and creates it on-demand. Since we're using the cached dentry, there's no point in keeping lookup_or_create_dir around, so that's removed. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
... even if it's a negative dentry. That way we can set ->d_op on root before anyone could race with us. Simplify d_compare(), while we are at it. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Jeff Mahoney 提交于
2.6.30-rc3 introduced some sanity checks in the VFS code to avoid NFS bugs by ensuring that lookup_one_len is always called under i_mutex. This patch expands the i_mutex locking to enclose lookup_one_len. This was always required, but not not enforced in the reiserfs code since it does locking around the xattr interactions with the xattr_sem. This is obvious enough, and it survived an overnight 50 thread ACL test. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Alessio Igor Bogani 提交于
Push BKL down into ->umount_begin() Signed-off-by: NAlessio Igor Bogani <abogani@texware.it> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Linus Torvalds 提交于
-
git://git.infradead.org/mtd-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/mtd-2.6: mtd: fix timeout in M25P80 driver mtd: Bug in m25p80.c during whole-chip erase mtd: expose subpage size via sysfs mtd: mtd in mtd_release is unused without CONFIG_MTD_CHAR
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: MCE: make cmci_discover_lock irq-safe x86: xen, i386: reserve Xen pagetables x86, kexec: fix crashdump panic with CONFIG_KEXEC_JUMP x86-64: finish cleanup_highmaps()'s job wrt. _brk_end x86: fix boot hang in early_reserve_e820() x86: Fix a typo in a printk message x86, srat: do not register nodes beyond e820 map
-
git://jdelvare.pck.nerim.net/jdelvare-2.6由 Linus Torvalds 提交于
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: hwmon: (w83781d) Fix W83782D support (NULL pointer dereference) hwmon: (asus_atk0110) Fix compiler warning
-
git://git.monstr.eu/linux-2.6-microblaze由 Linus Torvalds 提交于
* 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix return value for sys_ipc microblaze: Storage class should be before const qualifier
-
由 Masami Hiramatsu 提交于
Fix kprobes to lock text_mutex around some arch_arm/disarm_kprobe() which are newly added by commit de5bd88d. Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com> Acked-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jean Delvare 提交于
Commit 360782dd (hwmon: (w83781d) Stop abusing struct i2c_client for ISA devices) broke W83782D support for devices connected on the ISA bus. You will hit a NULL pointer dereference as soon as you read any device attribute. Other devices, and W83782D devices on the SMBus, aren't affected. Reported-by: Michel Abraham Signed-off-by: NJean Delvare <khali@linux-fr.org> Tested-by: Michel Abraham
-
由 Luca Tettamanti 提交于
atk_sensor_type is only used when DEBUG is defined. Signed-off-by: NLuca Tettamanti <kronos.it@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 08 5月, 2009 13 次提交
-
-
由 Peter Horton 提交于
Extend erase timeout in M25P80 SPI Flash driver. The M25P80 drivers fails erasing sectors on a M25P128 because the ready wait timeout is too short. Change the timeout from a simple loop count to a suitable number of seconds. Signed-off-by: NPeter Horton <zero@colonel-panic.org> Tested-by: NMartin Michlmayr <tbm@cyrius.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Hidetoshi Seto 提交于
Lockdep reports the warning below when Li tries to offline one cpu: [ 110.835487] ================================= [ 110.835616] [ INFO: inconsistent lock state ] [ 110.835688] 2.6.30-rc4-00336-g8c9ed899 #52 [ 110.835757] --------------------------------- [ 110.835828] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. [ 110.835908] swapper/0 [HC1[1]:SC0[0]:HE0:SE1] takes: [ 110.835982] (cmci_discover_lock){?.+...}, at: [<ffffffff80236dc0>] cmci_clear+0x30/0x9b cmci_clear() can be called via smp_call_function_single(). It is better to disable interrupt while holding cmci_discover_lock, to turn it into an irq-safe lock - we can deadlock otherwise. [ Impact: fix possible deadlock in the MCE code ] Reported-by: NShaohua Li <shaohua.li@intel.com> Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <4A03ED38.8000700@jp.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Reported-by: Shaohua Li<shaohua.li@intel.com>
-
由 Jeremy Fitzhardinge 提交于
The Xen pagetables are no longer implicitly reserved as part of the other i386_start_kernel reservations, so make sure we explicitly reserve them. This prevents them from being released into the general kernel free page pool and reused. [ Impact: fix Xen guest crash ] Also-Bisected-by: NBryan Donlan <bdonlan@gmail.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Xen-devel <xen-devel@lists.xensource.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <4A032EEC.30509@goop.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Huang Ying 提交于
Tim Starling reported that crashdump will panic with kernel compiled with CONFIG_KEXEC_JUMP due to null pointer deference in machine_kexec_32.c: machine_kexec(), when deferencing kexec_image. Refering to: http://bugzilla.kernel.org/show_bug.cgi?id=13265 This patch fixes the BUG via replacing global variable reference: kexec_image in machine_kexec() with local variable reference: image, which is more appropriate, and will not be null. Same BUG is in machine_kexec_64.c too, so fixed too in the same way. [ Impact: fix crash on kexec ] Reported-by: NTim Starling <tstarling@wikimedia.org> Signed-off-by: NHuang Ying <ying.huang@intel.com> LKML-Reference: <1241751101.6259.85.camel@yhuang-dev.sh.intel.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Jan Beulich 提交于
With the introduction of the .brk section, special care must be taken that no unused page table entries remain if _brk_end and _end are separated by a 2M page boundary. cleanup_highmap() runs very early and hence cannot take care of that, hence potential entries needing to be removed past _brk_end must be cleared once the brk allocator has done its job. [ Impact: avoids undesirable TLB aliases ] Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Jan Beulich 提交于
If the first non-reserved (sub-)range doesn't fit the size requested, an endless loop will be entered. If a range returned from find_e820_area_size() turns out insufficient in size, the range must be skipped before calling the function again. [ Impact: fixes boot hang on some platforms ] Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (32 commits) [CIFS] Fix double list addition in cifs posix open code [CIFS] Allow raw ntlmssp code to be enabled with sec=ntlmssp [CIFS] Fix SMB uid in NTLMSSP authenticate request [CIFS] NTLMSSP reenabled after move from connect.c to sess.c [CIFS] Remove sparse warning [CIFS] remove checkpatch warning [CIFS] Fix final user of old string conversion code [CIFS] remove cifs_strfromUCS_le [CIFS] NTLMSSP support moving into new file, old dead code removed [CIFS] Fix endian conversion of vcnum field [CIFS] Remove trailing whitespace [CIFS] Remove sparse endian warnings [CIFS] Add remaining ntlmssp flags and standardize field names [CIFS] Fix build warning cifs: fix length handling in cifs_get_name_from_search_buf [CIFS] Remove unneeded QuerySymlink call and fix mapping for unmapped status [CIFS] rename cifs_strndup to cifs_strndup_from_ucs Added loop check when mounting DFS tree. Enable dfs submounts to handle remote referrals. [CIFS] Remove older session setup implementation ...
-
由 Steve French 提交于
Remove adding open file entry twice to lists in the file Do not fill file info twice in case of posix opens and creates Signed-off-by: NShirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 David Howells 提交于
Don't check vm_region::vm_start is page aligned in add_nommu_region() because the region may reflect some non-page-aligned mapped file, such as could be obtained from RomFS XIP. Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://neil.brown.name/md由 Linus Torvalds 提交于
* 'for-linus' of git://neil.brown.name/md: md: remove rd%d links immediately after stopping an array. md: remove ability to explicit set an inactive array to 'clean'. md: constify VFTs md: tidy up status_resync to handle large arrays. md: fix some (more) errors with bitmaps on devices larger than 2TB. md/raid10: don't clear bitmap during recovery if array will still be degraded. md: fix loading of out-of-date bitmap.
-
由 Linus Torvalds 提交于
It's a really simple patch that basically just open-codes the current "secure_ip_id()" call, but when open-coding it we now use a _static_ hashing area, so that it gets updated every time. And to make sure somebody can't just start from the same original seed of all-zeroes, and then do the "half_md4_transform()" over and over until they get the same sequence as the kernel has, each iteration also mixes in the same old "current->pid + jiffies" we used - so we should now have a regular strong pseudo-number generator, but we also have one that doesn't have a single seed. Note: the "pid + jiffies" is just meant to be a tiny tiny bit of noise. It has no real meaning. It could be anything. I just picked the previous seed, it's just that now we keep the state in between calls and that will feed into the next result, and that should make all the difference. I made that hash be a per-cpu data just to avoid cache-line ping-pong: having multiple CPU's write to the same data would be fine for randomness, and add yet another layer of chaos to it, but since get_random_int() is supposed to be a fast interface I did it that way instead. I considered using "__raw_get_cpu_var()" to avoid any preemption overhead while still getting the hash be _mostly_ ping-pong free, but in the end good taste won out. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5507/1: support R_ARM_MOVW_ABS_NC and MOVT_ABS relocation types [ARM] 5506/1: davinci: DMA_32BIT_MASK --> DMA_BIT_MASK(32) i.MX31: Disable CPU_32v6K in mx3_defconfig. mx3fb: Fix compilation with CONFIG_PM mx27ads: move PBC mapping out of vmalloc space MXC: remove BUG_ON in interrupt handler mx31: remove mx31moboard_defconfig ARM: ARCH_MXC should select HAVE_CLK mxc : BUG in imx_dma_request mxc : Clean up properly when imx_dma_free() used without imx_dma_disable() [ARM] mv78xx0: update defconfig [ARM] orion5x: update defconfig [ARM] Kirkwood: update defconfig [ARM] Kconfig typo fix: "PXA930" -> "CPU_PXA930". [ARM] S3C2412: Add missing cache flush in suspend code [ARM] S3C: Add UDIVSLOT support for newer UARTS [ARM] S3C64XX: Add S3C64XX_PA_IIS{0,1} to <mach/map.h>
-
由 Paul Gortmaker 提交于
From: Bruce Ashfield <bruce.ashfield@windriver.com> To fully support the armv7-a instruction set/optimizations, support for the R_ARM_MOVW_ABS_NC and R_ARM_MOVT_ABS relocation types is required. The MOVW and MOVT are both load-immediate instructions, MOVW loads 16 bits into the bottom half of a register, and MOVT loads 16 bits into the top half of a register. The relocation information for these instructions has a full 32 bit value, plus an addend which is stored in the 16 immediate bits in the instruction itself. The immediate bits in the instruction are not contiguous (the register # splits it into a 4 bit and 12 bit value), so the addend has to be extracted accordingly and added to the value. The value is then split and put into the instruction; a MOVW uses the bottom 16 bits of the value, and a MOVT uses the top 16 bits. Signed-off-by: NDavid Borman <david.borman@windriver.com> Signed-off-by: NBruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 07 5月, 2009 8 次提交
-
-
由 Kevin Hilman 提交于
As per commit 284901a9, use DMA_BIT_MASK(n) Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 NeilBrown 提交于
md maintains link in sys/mdXX/md/ to identify which device has which role in the array. e.g. rd2 -> dev-sda indicates that the device with role '2' in the array is sda. These links are only present when the array is active. They are created immediately after ->run is called, and so should be removed immediately after ->stop is called. However they are currently removed a little bit later, and it is possible for ->run to be called again, thus adding these links, before they are removed. So move the removal earlier so they are consistently only present when the array is active. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
Being able to write 'clean' to an 'array_state' of an inactive array to activate it in 'clean' mode is both unnecessary and inconvenient. It is unnecessary because the same can be achieved by writing 'active'. This activates and array, but it still remains 'clean' until the first write. It is inconvenient because writing 'clean' is more often used to cause an 'active' array to revert to 'clean' mode (thus blocking any writes until a 'write-pending' is promoted to 'active'). Allowing 'clean' to both activate an array and mark an active array as clean can lead to races: One program writes 'clean' to mark the active array as clean at the same time as another program writes 'inactive' to deactivate (stop) and active array. Depending on which writes first, the array could be deactivated and immediately reactivated which isn't what was desired. So just disable the use of 'clean' to activate an array. This avoids a race that can be triggered with mdadm-3.0 and external metadata, so it suitable for -stable. Reported-by: NRafal Marszewski <rafal.marszewski@intel.com> Acked-by: NDan Williams <dan.j.williams@intel.com> Cc: <stable@kernel.org> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 Jan Engelhardt 提交于
Signed-off-by: NJan Engelhardt <jengelh@medozas.de> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
Two problems in status_resync. 1/ It still used Kilobytes as the basic block unit, while most code now uses sectors uniformly. 2/ It doesn't allow for the possibility that max_sectors exceeds the range of "unsigned long". So - change "max_blocks" to "max_sectors", and store sector numbers in there and in 'resync' - Make 'rt' a 'sector_t' so it can temporarily hold the number of remaining sectors. - use sector_div rather than normal division. - change the magic '100' used to preserve precision to '32'. + making it a power of 2 makes division easier + it doesn't need to be as large as it was chosen when we averaged speed over the entire run. Now we average speed over the last 30 seconds or so. Reported-by: N"Mario 'BitKoenig' Holbe" <Mario.Holbe@TU-Ilmenau.DE> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
If a write intent bitmap covers more than 2TB, we sometimes work with values beyond 32bit, so these need to be sector_t. This patches add the required casts to some unsigned longs that are being shifted up. This will affect any raid10 larger than 2TB, or any raid1/4/5/6 with member devices that are larger than 2TB. Signed-off-by: NNeilBrown <neilb@suse.de> Reported-by: N"Mario 'BitKoenig' Holbe" <Mario.Holbe@TU-Ilmenau.DE> Cc: stable@kernel.org
-
由 NeilBrown 提交于
If we have a raid10 with multiple missing devices, and we recover just one of these to a spare, then we risk (depending on the bitmap and array chunk size) clearing bits of the bitmap for which recovery isn't complete (because a device is still missing). This can lead to a subsequent "re-add" being recovered without any IO happening, which would result in loss of data. This patch takes the safe approach of not clearing bitmap bits if the array will still be degraded. This patch is suitable for all active -stable kernels. Cc: stable@kernel.org Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
When md is loading a bitmap which it knows is out of date, it fills each page with 1s and writes it back out again. However the write_page call makes used of bitmap->file_pages and bitmap->last_page_size which haven't been set correctly yet. So this can sometimes fail. Move the setting of file_pages and last_page_size to before the call to write_page. This bug can cause the assembly on an array to fail, thus making the data inaccessible. Hence I think it is a suitable candidate for -stable. Cc: stable@kernel.org Reported-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NNeilBrown <neilb@suse.de>
-