Set the family field in xt_[matches|targets] registered.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the first conntrack ID assigned is 2, use 1 instead.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix oversized message, use NLMSG_SPACE just one since it reserves space
for the netlink header and NFA_SPACE for every attribute.

Thanks to Harald Welte for the feedback
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The expectation mask has some particularities that requires a different
handling. The protocol number fields can be set to non-valid protocols,
ie. l3num is set to 0xFFFF. Since that protocol does not exist, the mask
tuple will not be dumped. Moreover, this results in a kernel panic when
nf_conntrack accesses the array of protocol handlers, that is PF_MAX (0x1F)
long.

This patch introduces the function ctnetlink_exp_dump_mask, that correctly
dumps the expectation mask. Such function uses the l3num value from the
expectation tuple that is a valid layer 3 protocol number. The value of the
l3num mask isn't dumped since it is meaningless from the userspace side.

Thanks to Yasuyuki Kozakai and Patrick McHardy for the feedback.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NThomas Vgtle <tv@lio96.de>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

do_ipv6_getsockopt returns -EINVAL for unknown options, not
-ENOPROTOOPT as do_ipv6_setsockopt.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsa: (124 commits)
  [ALSA] version 1.0.11rc4
  [PATCH] Intruduce DMA_28BIT_MASK
  [ALSA] hda-codec - Add support for ASUS P4GPL-X
  [ALSA] hda-codec - Add support for HP nx9420 laptop
  [ALSA] Fix memory leaks in error path of control.c
  [ALSA] AMD Au1x00: AC'97 controller is memory mapped
  [ALSA] AMD Au1x00: fix DMA init/cleanup
  [ALSA] hda-codec - Fix generic auto-configurator
  [ALSA] hda-codec - Fix BIOS auto-configuration
  [ALSA] Fixes typos in Audiophile-USB.txt
  [ALSA] ice1712 - typo fixes for dxr_enable module option
  [ALSA] AMD Au1x00: make driver build after cleanup
  [ALSA] ice1712 - Fix wrong value types for enum items
  [ALSA] fix resource leak in usbmixer
  [ALSA] Fix gus_pcm dereference before NULL
  [ALSA] Fix seq_clientmgr dereferences before NULL check
  [ALSA] hda-codec - Fix for Samsung R65 and ASUS A6J
  [ALSA] hda-codec - Add support for VAIO FE550G and SZ110
  [ALSA] usb-audio: add Maya44 mixer control names
  [ALSA] usb-audio: add Casio PL-40R support
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial:
  fixed path to moved file in include/linux/device.h
  Fix spelling in E1000_DISABLE_PACKET_SPLIT Kconfig description
  Documentation/dvb/get_dvb_firmware: fix firmware URL
  Documentation: Update to BUG-HUNTING
  Remove superfluous NOTIFY_COOKIE_LEN define
  add "tags" to .gitignore
  Fix "frist", "fisrt", typos
  fix rwlock usage example
  It's UTF-8

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Add a secondary TSB for hugepage mappings.
  [SPARC]: Respect vm_page_prot in io_remap_page_range().

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [TG3]: Bump driver version and reldate.
  [TG3]: Skip phy power down on some devices
  [TG3]: Fix SRAM access during tg3_init_one()
  [X25]: dte facilities 32 64 ioctl conversion
  [X25]: allow ITU-T DTE facilities for x25
  [X25]: fix kernel error message 64 bit kernel
  [X25]: ioctl conversion 32 bit user to 64 bit kernel
  [NET]: socket timestamp 32 bit handler for 64 bit kernel
  [NET]: allow 32 bit socket ioctl in 64 bit kernel
  [BLUETOOTH]: Return negative error constant

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (138 commits)
  [SCSI] libata: implement minimal transport template for ->eh_timed_out
  [SCSI] eliminate rphy allocation in favour of expander/end device allocation
  [SCSI] convert mptsas over to end_device/expander allocations
  [SCSI] allow displaying and setting of cache type via sysfs
  [SCSI] add scsi_mode_select to scsi_lib.c
  [SCSI] 3ware 9000 add big endian support
  [SCSI] qla2xxx: update MAINTAINERS
  [SCSI] scsi: move target_destroy call
  [SCSI] fusion - bump version
  [SCSI] fusion - expander hotplug suport in mptsas module
  [SCSI] fusion - exposing raid components in mptsas
  [SCSI] fusion - memory leak, and initializing fields
  [SCSI] fusion - exclosure misspelled
  [SCSI] fusion - cleanup mptsas event handling functions
  [SCSI] fusion - removing target_id/bus_id from the VirtDevice structure
  [SCSI] fusion - static fix's
  [SCSI] fusion - move some debug firmware event debug msgs to verbose level
  [SCSI] fusion - loginfo header update
  [SCSI] add scsi_reprobe_device
  [SCSI] megaraid_sas: fix extended timeout handling
  ...

Add a slab cache for the SELinux inode security struct, one of which is
allocated for every inode instantiated by the system.

The memory savings are considerable.

On 64-bit, instead of the size-128 cache, we have a slab object of 96
bytes, saving 32 bytes per object.  After booting, I see about 4000 of
these and then about 17,000 after a kernel compile.  With this patch, we
save around 530KB of kernel memory in the latter case.  On 32-bit, the
savings are about half of this.
Signed-off-by: NJames Morris <jmorris@namei.org>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove an unneded pointer variable in selinux_inode_init_security().
Signed-off-by: NJames Morris <jmorris@namei.org>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A further fix is needed for selinuxfs link count management, to ensure that
the count is correct for the parent directory when a subdirectory is
created.  This is only required for the root directory currently, but the
code has been updated for the general case.
Signed-off-by: NJames Morris <jmorris@namei.org>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix copy & paste error in sel_make_avc_files(), removing a supurious call to
d_genocide() in the error path.  All of this will be cleaned up by
kill_litter_super().
Signed-off-by: NJames Morris <jmorris@namei.org>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove the call to sel_make_bools() from sel_fill_super(), as policy needs to
be loaded before the boolean files can be created.  Policy will never be
loaded during sel_fill_super() as selinuxfs is kernel mounted during init and
the only means to load policy is via selinuxfs.

Also, the call to d_genocide() on the error path of sel_make_bools() is
incorrect and replaced with sel_remove_bools().
Signed-off-by: NJames Morris <jmorris@namei.org>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Unify the error path of sel_fill_super() so that all errors pass through the
same point and generate an error message.  Also, removes a spurious dput() in
the error path which breaks the refcounting for the filesystem
(litter_kill_super() will correctly clean things up itself on error).
Signed-off-by: NJames Morris <jmorris@namei.org>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use existing sel_make_dir() helper to create booleans directory rather than
duplicating the logic.
Signed-off-by: NJames Morris <jmorris@namei.org>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix the hard link count for selinuxfs directories, which are currently one
short.
Signed-off-by: NJames Morris <jmorris@namei.org>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Simplify sel_read_bool to use the simple_read_from_buffer helper, like the
other selinuxfs functions.
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Acked-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: Stephen Smalley <sds@epoch.ncsc.mil>
Cc: James Morris <jmorris@namei.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch disables the automatic labeling of new inodes on disk
when no policy is loaded.

Discussion is here:
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=180296

In short, we're changing the behavior so that when no policy is loaded,
SELinux does not label files at all.  Currently it does add an 'unlabeled'
label in this case, which we've found causes problems later.

SELinux always maintains a safe internal label if there is none, so with this
patch, we just stick with that and wait until a policy is loaded before adding
a persistent label on disk.

The effect is simply that if you boot with SELinux enabled but no policy
loaded and create a file in that state, SELinux won't try to set a security
extended attribute on the new inode on the disk.  This is the only sane
behavior for SELinux in that state, as it cannot determine the right label to
assign in the absence of a policy.  That state usually doesn't occur, but the
rawhide installer seemed to be misbehaving temporarily so it happened to show
up on a test install.
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Acked-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Centralize the page migration functions in anticipation of additional
tinkering.  Creates a new file mm/migrate.c

1. Extract buffer_migrate_page() from fs/buffer.c

2. Extract central migration code from vmscan.c

3. Extract some components from mempolicy.c

4. Export pageout() and remove_from_swap() from vmscan.c

5. Make it possible to configure NUMA systems without page migration
   and non-NUMA systems with page migration.

I had to so some #ifdeffing in mempolicy.c that may need a cleanup.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The alien cache rotor in mm/slab.c assumes that the first online node is
node 0.  Eventually for some archs, especially with hotplug, this will no
longer be true.

Fix the interleave rotor to handle the general case of node numbering.
Signed-off-by: NPaul Jackson <pj@sgi.com>
Acked-by: NChristoph Lameter <clameter@engr.sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix bogus node loop in hugetlb.c alloc_fresh_huge_page(), which was
assuming that nodes are numbered contiguously from 0 to num_online_nodes().
Once the hotplug folks get this far, that will be false.
Signed-off-by: NPaul Jackson <pj@sgi.com>
Acked-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When we've allocated SWAPFILE_CLUSTER pages, ->cluster_next should be the
first index of swap cluster.  But current code probably sets it wrong offset.
Signed-off-by: NAkinobu Mita <mita@miraclelinux.com>
Acked-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

1. Only disable interrupts if there is actually something to free

2. Only dirty the pcp cacheline if we actually freed something.

3. Disable interrupts for each single pcp and not for cleaning
  all the pcps in all zones of a node.

drain_node_pages is called every 2 seconds from cache_reap. This
fix should avoid most disabling of interrupts.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The list_lock also protects the shared array and we call drain_array() with
the shared array.  Therefore we cannot go as far as I wanted to but have to
take the lock in a way so that it also protects the array_cache in
drain_pages.

(Note: maybe we should make the array_cache locking more consistent?  I.e.
always take the array cache lock for shared arrays and disable interrupts
for the per cpu arrays?)
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove drain_array_locked and use that opportunity to limit the time the l3
lock is taken further.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

And a parameter to drain_array to control the freeing of all objects and
then use drain_array() to replace instances of drain_array_locked with
drain_array.  Doing so will avoid taking locks in those locations if the
arrays are empty.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

cache_reap takes the l3->list_lock (disabling interrupts) unconditionally
and then does a few checks and maybe does some cleanup.  This patch makes
cache_reap() only take the lock if there is work to do and then the lock is
taken and released for each cleaning action.

The checking of when to do the next reaping is done without any locking and
becomes racy.  Should not matter since reaping can also be skipped if the
slab mutex cannot be acquired.

The same is true for the touched processing.  If we get this wrong once in
awhile then we will mistakenly clean or not clean the shared cache.  This
will impact performance slightly.

Note that the additional drain_array() function introduced here will fall
out in a subsequent patch since array cleaning will now be very similar
from all callers.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make shrink_all_memory() repeat the attempts to free more memory if there
seems to be no pages to free.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

follow_hugetlb_page() walks a range of user virtual address and then fills
in list of struct page * into an array that is passed from the argument
list.  It also gets a reference count via get_page().  For compound page,
get_page() actually traverse back to head page via page_private() macro and
then adds a reference count to the head page.  Since we are doing a virt to
pte look up, kernel already has a struct page pointer into the head page.
So instead of traverse into the small unit page struct and then follow a
link back to the head page, optimize that with incrementing the reference
count directly on the head page.

The benefit is that we don't take a cache miss on accessing page struct for
the corresponding user address and more importantly, not to pollute the
cache with a "not very useful" round trip of pointer chasing.  This adds a
moderate performance gain on an I/O intensive database transaction
workload.
Signed-off-by: NKen Chen <kenneth.w.chen@intel.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Implementation of hugetlbfs_counter() is functionally equivalent to
atomic_inc_return().  Use the simpler atomic form.
Signed-off-by: NKen Chen <kenneth.w.chen@intel.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Quite a long time back, prepare_hugepage_range() replaced
is_aligned_hugepage_range() as the callback from mm/mmap.c to arch code to
verify if an address range is suitable for a hugepage mapping.
is_aligned_hugepage_range() stuck around, but only to implement
prepare_hugepage_range() on archs which didn't implement their own.

Most archs (everything except ia64 and powerpc) used the same
implementation of is_aligned_hugepage_range().  On powerpc, which
implements its own prepare_hugepage_range(), the custom version was never
used.

In addition, "is_aligned_hugepage_range()" was a bad name, because it
suggests it returns true iff the given range is a good hugepage range,
whereas in fact it returns 0-or-error (so the sense is reversed).

This patch cleans up by abolishing is_aligned_hugepage_range().  Instead
prepare_hugepage_range() is defined directly.  Most archs use the default
version, which simply checks the given region is aligned to the size of a
hugepage.  ia64 and powerpc define custom versions.  The ia64 one simply
checks that the range is in the correct address space region in addition to
being suitably aligned.  The powerpc version (just as previously) checks
for suitable addresses, and if necessary performs low-level MMU frobbing to
set up new areas for use by hugepages.

No libhugetlbfs testsuite regressions on ppc64 (POWER5 LPAR).
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NZhang Yanmin <yanmin.zhang@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The optional hugepage callback, hugetlb_free_pgd_range() is presently
implemented non-trivially only on ia64 (but I plan to add one for powerpc
shortly).  It has its own prototype for the function in asm-ia64/pgtable.h.
 However, since the function is called from generic code, it make sense for
its prototype to be in the generic hugetlb.h header file, as the protypes
other arch callbacks already are (prepare_hugepage_range(),
set_huge_pte_at(), etc.).  This patch makes it so.
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Turns out the hugepage logic in free_pgtables() was doubly broken.  The
loop coalescing multiple normal page VMAs into one call to free_pgd_range()
had an off by one error, which could mean it would coalesce one hugepage
VMA into the same bundle (checking 'vma' not 'next' in the loop).  I
transferred this bug into the new is_vm_hugetlb_page() based version.
Here's the fix.

This one didn't bite on powerpc previously for the same reason the
is_hugepage_only_range() problem didn't: powerpc's hugetlb_free_pgd_range()
is identical to free_pgd_range().  It didn't bite on ia64 because the
hugepage region is distant enough from any other region that the separated
PMD_SIZE distance test would always prevent coalescing the two together.

No libhugetlbfs testsuite regressions (ppc64, POWER5).
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

free_pgtables() has special logic to call hugetlb_free_pgd_range() instead
of the normal free_pgd_range() on hugepage VMAs.  However, the test it uses
to do so is incorrect: it calls is_hugepage_only_range on a hugepage sized
range at the start of the vma.  is_hugepage_only_range() will return true
if the given range has any intersection with a hugepage address region, and
in this case the given region need not be hugepage aligned.  So, for
example, this test can return true if called on, say, a 4k VMA immediately
preceding a (nicely aligned) hugepage VMA.

At present we get away with this because the powerpc version of
hugetlb_free_pgd_range() is just a call to free_pgd_range().  On ia64 (the
only other arch with a non-trivial is_hugepage_only_range()) we get away
with it for a different reason; the hugepage area is not contiguous with
the rest of the user address space, and VMAs are not permitted in between,
so the test can't return a false positive there.

Nonetheless this should be fixed.  We do that in the patch below by
replacing the is_hugepage_only_range() test with an explicit test of the
VMA using is_vm_hugetlb_page().

This in turn changes behaviour for platforms where is_hugepage_only_range()
returns false always (everything except powerpc and ia64).  We address this
by ensuring that hugetlb_free_pgd_range() is defined to be identical to
free_pgd_range() (instead of a no-op) on everything except ia64.  Even so,
it will prevent some otherwise possible coalescing of calls down to
free_pgd_range().  Since this only happens for hugepage VMAs, removing this
small optimization seems unlikely to cause any trouble.

This patch causes no regressions on the libhugetlbfs testsuite - ppc64
POWER5 (8-way), ppc64 G5 (2-way) and i386 Pentium M (UP).
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Acked-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Originally, mm/hugetlb.c just handled the hugepage physical allocation path
and its {alloc,free}_huge_page() functions were used from the arch specific
hugepage code.  These days those functions are only used with mm/hugetlb.c
itself.  Therefore, this patch makes them static and removes their
prototypes from hugetlb.h.  This requires a small rearrangement of code in
mm/hugetlb.c to avoid a forward declaration.

This patch causes no regressions on the libhugetlbfs testsuite (ppc64,
POWER5).
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

These days, hugepages are demand-allocated at first fault time.  There's a
somewhat dubious (and racy) heuristic when making a new mmap() to check if
there are enough available hugepages to fully satisfy that mapping.

A particularly obvious case where the heuristic breaks down is where a
process maps its hugepages not as a single chunk, but as a bunch of
individually mmap()ed (or shmat()ed) blocks without touching and
instantiating the pages in between allocations.  In this case the size of
each block is compared against the total number of available hugepages.
It's thus easy for the process to become overcommitted, because each block
mapping will succeed, although the total number of hugepages required by
all blocks exceeds the number available.  In particular, this defeats such
a program which will detect a mapping failure and adjust its hugepage usage
downward accordingly.

The patch below addresses this problem, by strictly reserving a number of
physical hugepages for hugepage inodes which have been mapped, but not
instatiated.  MAP_SHARED mappings are thus "safe" - they will fail on
mmap(), not later with an OOM SIGKILL.  MAP_PRIVATE mappings can still
trigger an OOM.  (Actually SHARED mappings can technically still OOM, but
only if the sysadmin explicitly reduces the hugepage pool between mapping
and instantiation)

This patch appears to address the problem at hand - it allows DB2 to start
correctly, for instance, which previously suffered the failure described
above.

This patch causes no regressions on the libhugetblfs testsuite, and makes a
test (designed to catch this problem) pass which previously failed (ppc64,
POWER5).
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>