- 27 8月, 2006 12 次提交
-
-
由 Krzysztof Helt 提交于
smp_setup_cpu_possible_map() needs to run after paging_init() so that the in-kernel device tree is setup. Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alan Stern 提交于
The existing unusual_devs entry for the UCR-61S2B appears to have too wide a revision range. It matches at least one device that doesn't respond to the initialization sequence. Perhaps the sequence needs to be updated, or perhaps something else can be done. For now, this patch (as764) restricts the range to include only the revision mentioned in the original comment. This resolves (for now!) Bugzilla entry #6950. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tomasz Kazmierczak 提交于
This patch removes support for a clone of Nokia DKU-5 cable made by Ours Technology Inc, as it turned out that the cable does not use the pl2303 chip, but OTI-6858 chip which is not compatible with the pl2303. Signed-off-by: NTomasz Kazmierczak <tomek.fizyk@op.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This was pointed out by Adrian Bunk <bunk@stusta.de>, as found by the Coverity Checker. Cc: Adrian Bunk <bunk@stusta.de> Cc: Oliver Bock <o.bock@fh-wolfenbuettel.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Henrik Kretzschmar 提交于
Removes an unused kerneldoc entry from pci_match_device and put the others into correct order. Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Scott Murray 提交于
Here is a patch against the CPCI hotplug core to fix up PCI resource assignment such that things will actually work when a hot inserted device is enabled. I mentioned this patch to you way back in April at ELC, but am only now out from under things enough to clean it up and submit it. I've basically cribbed the corresponding code from shpchp_pci.c, so there are no big surprises. If it's still possible, I wouldn't mind this going into 2.6.18, but it wouldn't be the end of the world if it went into 2.6.19. Signed-off-by: NScott Murray <scottm@somanetworks.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Daniel Ritz 提交于
- add the ICH6(R) LPC to the ICH6 ACPI quirks. currently only the ICH6-M is handled. [ PCI_DEVICE_ID_INTEL_ICH6_1 is the ICH6-M LPC, ICH6_0 is the ICH6(R) ] - remove the wrong quirk calling asus_hides_smbus_lpc() for ICH6. the register modified in asus_hides_smbus_lpc() has a different meaning in ICH6. Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Acked-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Daniel Ritz 提交于
On i386 PCI mmconfig forgets the bus number when setting the fallback_slots bits which means fallback to conf1 only works for bus 0. Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Daniel Ritz 提交于
there was a change in 2.6.17 which affected the order in which the PCI access methods are probed. this gives regressions on some machines with broken BIOS. the problem is that PCBIOS sometimes reports last bus wrong, leaving cardbus non-funcational. previously those system worked fine with direct access. The patch changes the PCI init code to have PCBIOS as last fallback, yet the PCBIOS code still has to run first to set pcibios_last_bus to the value reported by the BIOS. this is needed in case legacy PCI probing (arch/i386/pci/legacy.c) is used to detect peer busses. using direct access if available fixes the cardbus problems. Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Cc: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Hans de Goede 提交于
This patch contains 2 sets of fixes for the abituguru: 1) Much improved timeout handling, drasticly reducing the amount of timeout errors on some motherboards 2) Fix the exit paths in the bank1 sensor type detect code to always restore the original settings even on an error. Without this our special test settings could remain seriously confusing the system BIOS's setup menu. Both are very much related and are must haves, to avoid messing up the uguru CMOS settings. Detailed changes: - Much improved timeout / wait for status handling. Many thanks to Sunil Kumar, for all his testing, ideas and patches! The code now first busy waits, polling the uguru for the expected status as this usually succeeds pretty quickly (within 90 reads). To avoid unnecessary CPU burn in timeout conditions, the amount of busy waiting has been halved from previous versions (120 tries instead of 250). This is not a problem, because this version goes to sleep after 120 attemps for 1 jiffy and then tries again, it does this sleep and try again 5 times before finally giving up. This (almost?) completly removes the timeout errors some people have seen regulary. Apparently some older uguru versions sometimes are distracted for a (relatively) long time. This solves this. - These timeout errors not only occur in the sending address part of reading the uguru but also in the wait for read state, so errors in this state are now handled as retryable just like send address state errors and are only logged and reported to userspace if 3 executive tries fail. - Fix a very nasty bug in the bank1 sensor type detection code, where it would not restore the original settings in any of the error paths! - Since not successfully restoring the original settings can seriously confuse the system BIOS (hang when entering the relevant setup menu), we now try restoring them 3 times before giving up. Signed-off-by: NHans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
The tps65010.c driver in the main tree never got updated with build fixes since the last batch of I2C driver changes; and the genirq trigger flags were updated wierdly too. This also includes a minor tweak to reduce the frequency used to poll for unplug-the-AC-power on the TPS chips that don't provide relevant IRQs. It _would_ be nice to sense whether there's even a battery, but that'd normally be an HDQ/1-wire interface to a smart battery, and such APIs aren't standardized. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
-
- 26 8月, 2006 5 次提交
-
-
由 Mike Christie 提交于
The callers of scsi_send_eh_cmnd are setting the cmnd buffer, and then scsi_send_eh_cmnd is copying that updated buffer to the old_cmnd variable. Then after the command runs, we end up copying that old_cmnd var which has the new cmnd to the scsi command buffer. When this command gets recent, all types of fun things happen like getting TUR or START_STOP commands with data and scatterlists. This patch made against scsi-rc-fixes, has the callers of scsi_send_eh_cmnd pass in the command so scsi_send_eh_cmnd can do the right thing. This should go into 2.6.18 since this fixes a regression added when we removed some of the scsi_cmnd fields and replaced them with local variables. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Andrew Vasquez 提交于
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Andrew Vasquez 提交于
Software must explicitely re-enable extended firmware tracing after any ISP abort condition. Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Andrew Vasquez 提交于
Original code attempts to retry PLOGIs to fcports that are FCP_TARGETs only. If the driver never performed a successful PLOGI/PRLI, the port-type would never be assigned, and the relogin logic would silently drop the request (and thus the port would not be recognized and registered). The fix is relatively straightforward, drop the FCP_TARGET-only check. Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Douglas Gilbert 提交于
There's a problem where sg is executing a ->nopage operation on a compound page, it actually calls get_page() on the first page in the compound rather than the page which is being mapped. The fix is to select the correct page by indexing into the compound. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 25 8月, 2006 17 次提交
-
-
-
由 Trond Myklebust 提交于
The check in open_exec() for inode->i_mode & 0111 has been made redundant by the fix to permission(). Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from 1d3741c5d991686699f100b65b9956f7ee7ae0ae commit)
-
由 Trond Myklebust 提交于
The check in prepare_binfmt() for inode->i_mode & 0111 is redundant, since open_exec() will already have done that. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from 822dec482ced07af32c378cd936d77345786572b commit)
-
由 Trond Myklebust 提交于
Currently, the access() call will return incorrect information on NFS if there exists an ACL that grants execute access to the user on a regular file. The reason the information is incorrect is that the VFS overrides this execute access in open_exec() by checking (inode->i_mode & 0111). This patch propagates the VFS execute bit check back into the generic permission() call. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from 64cbae98848c4c99851cb0a405f0b4982cd76c1e commit)
-
由 Trond Myklebust 提交于
This is needed in order to handle any NFS4ERR_DELAY errors that might be returned by the server. It also ensures that we map the NFSv4 errors before they are returned to userland. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from 71c12b3f0abc7501f6ed231a6d17bc9c05a238dc commit)
-
由 David Howells 提交于
Check the bounds of length specifiers more thoroughly in the XDR decoding of NFS4 readdir reply data. Currently, if the server returns a bitmap or attr length that causes the current decode point pointer to wrap, this could go undetected (consider a small "negative" length on a 32-bit machine). Also add a check into the main XDR decode handler to make sure that the amount of data is a multiple of four bytes (as specified by RFC-1014). This makes sure that we can do u32* pointer subtraction in the NFS client without risking an undefined result (the result is undefined if the pointers are not correctly aligned with respect to one another). Signed-Off-By: NDavid Howells <dhowells@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from 5861fddd64a7eaf7e8b1a9997455a24e7f688092 commit)
-
由 J. Bruce Fields 提交于
Neil Brown observed that the current limit of 32 bytes isn't enough to hold two ip addresses and the rest of the stuff we're putting in it, so it's often truncated to the point where it's unlikely to be unique. This can cause spurious CLID_INUSE's from the server. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from fc8c17ec251e984ab3df9182ed097aa5b577c915 commit)
-
由 Chuck Lever 提交于
Some hardware uses port 664 for its hardware-based IPMI listener. Teach the RPC client to avoid using that port by raising the default minimum port number to 665. Test plan: Find a mainboard known to use port 664 for IPMI; enable IPMI; mount NFS servers in a tight loop. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from 58e8cb3a035d22fc386e1c53a5d98c3f219530fb commit)
-
由 Trond Myklebust 提交于
The problem is that we may be caching writes that would extend the file and create a hole in the region that we are reading. In this case, we need to detect the eof from the server, ensure that we zero out the pages that are part of the hole and mark them as up to date. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from 856b603b01b99146918c093969b6cb1b1b0f1c01 commit)
-
由 Trond Myklebust 提交于
nlm_traverse_files() is not allowed to hold the nlm_file_mutex while calling nlm_inspect file, since it may end up calling nlm_release_file() when releaseing the blocks. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from e558d3cde986e04f68afe8c790ad68ef4b94587a commit)
-
由 Trond Myklebust 提交于
rpc_unlink() and rpc_rmdir() will dput the dentry reference for you. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from a05a57effa71a1f67ccbfc52335c10c8b85f3f6a commit)
-
由 Trond Myklebust 提交于
A prior call to rpc_depopulate() by rpc_rmdir() on the parent directory may have already called simple_unlink() on this entry. Add the same check to rpc_rmdir(). Also remove a redundant call to rpc_close_pipes() in rpc_rmdir. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from 0bbfb9d20f6437c4031aa3bf9b4d311a053e58e3 commit)
-
由 Trond Myklebust 提交于
Make it take a dentry argument instead of a path Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from 648d4116eb2509f010f7f34704a650150309b3e7 commit)
-
由 Trond Myklebust 提交于
Signe-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from 88bf6d811b01a4be7fd507d18bf5f1c527989089 commit)
-
由 ASANO Masahiro 提交于
I'm trying to speeding up mkdir(2) for network file systems. A typical mkdir(2) calls two inode_operations: lookup and mkdir. The lookup operation would fail with ENOENT in common case. I think it is unnecessary because the subsequent mkdir operation can check it. In case of creat(2), lookup operation is called with the LOOKUP_CREATE flag, so individual filesystem can omit real lookup. e.g. nfs_lookup(). Here is a sample patch which uses LOOKUP_CREATE and O_EXCL on mkdir, symlink and mknod. This uses the gadget for creat(2). And here is the result of a benchmark on NFSv3. mkdir(2) 10,000 times: original 50.5 sec patched 29.0 sec Signed-off-by: NASANO Masahiro <masano@tnes.nec.co.jp> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from fab7bf44449b29f9d5572a5dd8adcf7c91d5bf0f commit)
-
由 Nikita Danilov 提交于
nfs_wb_page() waits on request completion and, as a result, is not safe to be called from nfs_release_page() invoked by VM scanner as part of GFP_NOFS allocation. Fix possible deadlock by analyzing gfp mask and refusing to release page if __GFP_FS is not set. Signed-off-by: NNikita Danilov <danilov@gmail.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> (cherry picked from 374d969debfb290bafcb41d28918dc6f7e43ce31 commit)
-
-
- 24 8月, 2006 6 次提交
-
-
由 Horst Hummel 提交于
The subsystem check in the PAV code is incorrect, it enables PAV per device instead of per subsystem. Signed-off-by: NHorst Hummel <horst.hummel@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Greg Kroah-Hartman 提交于
Merge branch 'upstream-greg' of gregkh@master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
-
由 Tejun Heo 提交于
vt6420 has super-fragile SCR registers which can hang the whole machine if accessed with the wrong timings. This patch makes sata_via use SCR registers only during probing and with the same timings as before (pre new EH), which is proven to work. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
This patch implements force_pcs module parameter for ata_piix. If 1, PCS is ignored, 2 honored. As there seem to be quite a few ICHs w/ impaired PCS, this option will be useful for cases where the default setting doesn't work. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
There have been a number of reports regarding some ICH5s failing to detect devices since the PCS handling update. Analysis shows that these problems are caused by bogus PCS values from those controllers. Before the PCS update, the driver didn't honor PCS regs exactly and probed them in many cases PCS reports no device. Now that PCS is honored exactly, these hardware problems are visible. This patch makes ICH5 ignore PCS. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Greg Kroah-Hartman 提交于
Merge branch 'upstream-greg' of gregkh@master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
-