1. 19 12月, 2011 5 次提交
    • A
      powerpc: Fix wrong divisor in usecs_to_cputime · 9f5072d4
      Andreas Schwab 提交于
      Commit d57af9b2 (taskstats: use real microsecond granularity for CPU times)
      renamed msecs_to_cputime to usecs_to_cputime, but failed to update all
      numbers on the way.  This causes nonsensical cpu idle/iowait values to be
      displayed in /proc/stat (the only user of usecs_to_cputime so far).
      
      This also renames __cputime_msec_factor to __cputime_usec_factor, adapting
      its value and using it directly in cputime_to_usecs instead of doing two
      multiplications.
      Signed-off-by: NAndreas Schwab <schwab@linux-m68k.org>
      Acked-by: NAnton Blanchard <anton@samba.org>
      Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      9f5072d4
    • D
      powerpc/mm: Fix section mismatch for read_n_cells · 2011b1d0
      David Rientjes 提交于
      read_n_cells() cannot be marked as .devinit.text since it is referenced
      from two functions that are not in that section: of_get_lmb_size() and
      hot_add_drconf_scn_to_nid().
      Signed-off-by: NDavid Rientjes <rientjes@google.com>
      Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      2011b1d0
    • D
      powerpc/mm: Fix section mismatch for mark_reserved_regions_for_nid · 28e86bdb
      David Rientjes 提交于
      mark_reserved_regions_for_nid() is only called from do_init_bootmem(),
      which is in .init.text, so it must be in the same section to avoid a
      section mismatch warning.
      Reported-by: NSubrata Modak <subrata@linux.vnet.ibm.com>
      Signed-off-by: NDavid Rientjes <rientjes@google.com>
      Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      28e86bdb
    • M
      powerpc: Add __SANE_USERSPACE_TYPES__ to asm/types.h for LL64 · 2c9c6ce0
      Matt Evans 提交于
      PPC64 uses long long for u64 in the kernel, but powerpc's asm/types.h
      prevents 64-bit userland from seeing this definition, instead defaulting
      to u64 == long in userspace.  Some user programs (e.g. kvmtool) may actually
      want LL64, so this patch adds a check for __SANE_USERSPACE_TYPES__ so that,
      if defined, int-ll64.h is included instead.
      Signed-off-by: NMatt Evans <matt@ozlabs.org>
      Acked-by: NIngo Molnar <mingo@elte.hu>
      Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      2c9c6ce0
    • A
      powerpc: POWER7 optimised copy_to_user/copy_from_user using VMX · a66086b8
      Anton Blanchard 提交于
      Implement a POWER7 optimised copy_to_user/copy_from_user using VMX.
      For large aligned copies this new loop is over 10% faster, and for
      large unaligned copies it is over 200% faster.
      
      If we take a fault we fall back to the old version, this keeps
      things relatively simple and easy to verify.
      
      On POWER7 unaligned stores rarely slow down - they only flush when
      a store crosses a 4KB page boundary. Furthermore this flush is
      handled completely in hardware and should be 20-30 cycles.
      
      Unaligned loads on the other hand flush much more often - whenever
      crossing a 128 byte cache line, or a 32 byte sector if either sector
      is an L1 miss.
      
      Considering this information we really want to get the loads aligned
      and not worry about the alignment of the stores. Microbenchmarks
      confirm that this approach is much faster than the current unaligned
      copy loop that uses shifts and rotates to ensure both loads and
      stores are aligned.
      
      We also want to try and do the stores in cacheline aligned, cacheline
      sized chunks. If the store queue is unable to merge an entire
      cacheline of stores then the L2 cache will have to do a
      read/modify/write. Even worse, we will serialise this with the stores
      in the next iteration of the copy loop since both iterations hit
      the same cacheline.
      
      Based on this, the new loop does the following things:
      
      1 - 127 bytes
      Get the source 8 byte aligned and use 8 byte loads and stores. Pretty
      boring and similar to how the current loop works.
      
      128 - 4095 bytes
      Get the source 8 byte aligned and use 8 byte loads and stores,
      1 cacheline at a time. We aren't doing the stores in cacheline
      aligned chunks so we will potentially serialise once per cacheline.
      Even so it is much better than the loop we have today.
      
      4096 - bytes
      If both source and destination have the same alignment get them both
      16 byte aligned, then get the destination cacheline aligned. Do
      cacheline sized loads and stores using VMX.
      
      If source and destination do not have the same alignment, we get the
      destination cacheline aligned, and use permute to do aligned loads.
      
      In both cases the VMX loop should be optimal - we always do aligned
      loads and stores and are always doing stores in cacheline aligned,
      cacheline sized chunks.
      
      To be able to use VMX we must be careful about interrupts and
      sleeping. We don't use the VMX loop when in an interrupt (which should
      be rare anyway) and we wrap the VMX loop in disable/enable_pagefault
      and fall back to the existing copy_tofrom_user loop if we do need to
      sleep.
      
      The VMX breakpoint of 4096 bytes was chosen using this microbenchmark:
      
      http://ozlabs.org/~anton/junkcode/copy_to_user.c
      
      Since we are using VMX and there is a cost to saving and restoring
      the user VMX state there are two broad cases we need to benchmark:
      
      - Best case - userspace never uses VMX
      
      - Worst case - userspace always uses VMX
      
      In reality a userspace process will sit somewhere between these two
      extremes. Since we need to test both aligned and unaligned copies we
      end up with 4 combinations. The point at which the VMX loop begins to
      win is:
      
      0% VMX
      aligned		2048 bytes
      unaligned	2048 bytes
      
      100% VMX
      aligned		16384 bytes
      unaligned	8192 bytes
      
      Considering this is a microbenchmark, the data is hot in cache and
      the VMX loop has better store queue merging properties we set the
      breakpoint to 4096 bytes, a little below the unaligned breakpoints.
      
      Some future optimisations we can look at:
      
      - Looking at the perf data, a significant part of the cost when a
        task is always using VMX is the extra exception we take to restore
        the VMX state. As such we should do something similar to the x86
        optimisation that restores FPU state for heavy users. ie:
      
              /*
               * If the task has used fpu the last 5 timeslices, just do a full
               * restore of the math state immediately to avoid the trap; the
               * chances of needing FPU soon are obviously high now
               */
              preload_fpu = tsk_used_math(next_p) && next_p->fpu_counter > 5;
      
        and
      
              /*
               * fpu_counter contains the number of consecutive context switches
               * that the FPU is used. If this is over a threshold, the lazy fpu
               * saving becomes unlazy to save the trap. This is an unsigned char
               * so that after 256 times the counter wraps and the behavior turns
               * lazy again; this to deal with bursty apps that only use FPU for
               * a short time
               */
      
      - We could create a paca bit to mirror the VMX enabled MSR bit and check
        that first, avoiding multiple calls to calling enable_kernel_altivec.
        That should help with iovec based system calls like readv.
      
      - We could have two VMX breakpoints, one for when we know the user VMX
        state is loaded into the registers and one when it isn't. This could
        be a second bit in the paca so we can calculate the break points quickly.
      
      - One suggestion from Ben was to save and restore the VSX registers
        we use inline instead of using enable_kernel_altivec.
      
      [BenH: Fixed a problem with preempt and fixed build without CONFIG_ALTIVEC]
      Signed-off-by: NAnton Blanchard <anton@samba.org>
      Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      a66086b8
  2. 16 12月, 2011 8 次提交
  3. 09 12月, 2011 8 次提交
  4. 08 12月, 2011 19 次提交