Pull networking fixes from David Miller:

 1) Really fix tuntap SKB use after free bug, from Eric Dumazet.

 2) Adjust SKB data pointer to point past the transport header before
    calling icmpv6_notify() so that the headers are in the state which
    that function expects.  From Duan Jiong.

 3) Fix ambiguities in the new tuntap multi-queue APIs.  From Jason
    Wang.

 4) mISDN needs to use del_timer_sync(), from Konstantin Khlebnikov.

 5) Don't destroy mutex after freeing up device private in mac802154,
    fix also from Konstantin Khlebnikov.

 6) Fix INET request socket leak in TCP and DCCP, from Christoph Paasch.

 7) SCTP HMAC kconfig rework, from Neil Horman.

 8) Fix SCTP jprobes function signature, otherwise things explode, from
    Daniel Borkmann.

 9) Fix typo in ipv6-offload Makefile variable reference, from Simon
    Arlott.

10) Don't fail USBNET open just because remote wakeup isn't supported,
    from Oliver Neukum.

11) be2net driver bug fixes from Sathya Perla.

12) SOLOS PCI ATM driver bug fixes from Nathan Williams and David
    Woodhouse.

13) Fix MTU changing regression in 8139cp driver, from John Greene.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (45 commits)
  solos-pci: ensure all TX packets are aligned to 4 bytes
  solos-pci: add firmware upgrade support for new models
  solos-pci: remove superfluous debug output
  solos-pci: add GPIO support for newer versions on Geos board
  8139cp: Prevent dev_close/cp_interrupt race on MTU change
  net: qmi_wwan: add ZTE MF880
  drivers/net: Use of_match_ptr() macro in smsc911x.c
  drivers/net: Use of_match_ptr() macro in smc91x.c
  ipv6: addrconf.c: remove unnecessary "if"
  bridge: Correctly encode addresses when dumping mdb entries
  bridge: Do not unregister all PF_BRIDGE rtnl operations
  use generic usbnet_manage_power()
  usbnet: generic manage_power()
  usbnet: handle PM failure gracefully
  ksz884x: fix receive polling race condition
  qlcnic: update driver version
  qlcnic: fix unused variable warnings
  net: fec: forbid FEC_PTP on SoCs that do not support
  be2net: fix wrong frag_idx reported by RX CQ
  be2net: fix be_close() to ensure all events are ack'ed
  ...

Merge tags 'dt-for-linus', 'gpio-for-linus' and 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6

Pull devicetree, gpio and spi bugfixes from Grant Likely:
 "Device tree v3.8 bug fix:
   - Fixes an undefined struct device build error and a missing symbol
     export.

  GPIO device driver bug fixes:
   - gpio/mvebu-gpio: Make mvebu-gpio depend on OF_CONFIG
   - gpio/ich: Add missing spinlock init

  SPI device driver bug fixes:
   - Most of this is bug fixes to the core code and the sh-hspi and
     s3c64xx device drivers.

   - There is also a patch here to add DT support to the Atmel driver.
     This one should have been in the first round, but I missed it.
     It's a low risk change contained within a single driver and the
     Atmel maintainer has requested it."

* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  of: define struct device in of_platform.h if !OF_DEVICE and !OF_ADDRESS
  of: Fix export of of_find_matching_node_and_match()

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  gpio/mvebu-gpio: Make mvebu-gpio depend on OF_CONFIG
  gpio/ich: Add missing spinlock init

* tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  spi/sh-hspi: fix return value check in hspi_probe().
  spi: fix tegra SPI binding examples
  spi/atmel: add DT support
  of/spi: Fix SPI module loading by using proper "spi:" modalias prefixes.
  spi: Change FIFO flush operation and spi channel off
  spi: Keep chipselect assertion during one message

Pull drm bugfix from Dave Airlie:
 "Just a single urgent regression fix, seeing a few wierd behaviours I'd
  like not to persist."

* 'drm-next' of git://people.freedesktop.org/~airlied/linux:
  drm/ttm: fix delayed ttm_bo_cleanup_refs_and_unlock delayed handling

Pull random updates from Ted Ts'o:
 "A few /dev/random improvements for the v3.8 merge window."

* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  random: Mix cputime from each thread that exits to the pool
  random: prime last_data value per fips requirements
  random: fix debug format strings
  random: make it possible to enable debugging without rebuild

The FPGA can't handled unaligned DMA (yet). So copy into an aligned buffer,
if skb->data isn't suitably aligned.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NNathan Williams <nathan@traverse.com.au>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NNathan Williams <nathan@traverse.com.au>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

dwmw2: Tidy up a little, simpler matching on which GPIO is being accessed,
       only register on newer boards, register under PCI device instead of
       duplicating them under each ATM device.
Signed-off-by: NNathan Williams <nathan@traverse.com.au>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit:  cb64edb6 upstream

Above commit may introduce a race between cp_interrupt and dev_close
/ change MTU / dev_open up state. Changes cp_interrupt to tolerate
this.  Change spin_locking in cp_interrupt to avoid possible
but unobserved race.
Reported-by: N"Francois Romieu" <romieu@fr.zoreil.com>

Tested on virtual hardware, Tx MTU size up to 4096, max tx payload
    was ping -s 4068 for MTU of 4096. No real hardware, need test
    assist.
Signed-off-by: N"John Greene" <jogreene@redhat.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: "David Woodhouse" <David.Woodhouse@intel.com>
Tested-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When building without device tree support (for the mv78x00 SoCs for
example), the build failed because of_irq_count is undeclared. However
mvebu-gpio is not designed to build without device tree support. So
make it depends on OF_CONFIG, remove the #ifdef OF_CONFIG line and the
platform_device_id.

Tested on RD-78x00-mASA, DB-78460-BP, DB-88F6710-BP-DDR3,
DB-MV784MP-GP, Mirabox and OpenBlocks AX3.
Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

As reported by CONFIG_DEBUG_SPINLOCK=y.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NPeter Tyser <ptyser@xes-inc.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Fix regression introduced by 85b144f8
"drm/ttm: call ttm_bo_cleanup_refs with reservation and lru lock held, v3"

Slowpath ttm_bo_cleanup_refs_and_unlock accidentally tried to increase
refcount on &bo->sync_obj instead of bo->sync_obj.

The compiler didn't complain since sync_obj_ref takes a void pointer,
so it was still valid c.

This could result in lockups, memory corruptions, and warnings like
these when graphics card VRAM usage is high:

------------[ cut here ]------------
WARNING: at include/linux/kref.h:42 radeon_fence_ref+0x2c/0x40()
Hardware name: System Product Name
Pid: 157, comm: X Not tainted 3.7.0-rc7-00520-g85b144f8-dirty #174
Call Trace:
[<ffffffff81058c84>] ? warn_slowpath_common+0x74/0xb0
[<ffffffff8129273c>] ? radeon_fence_ref+0x2c/0x40
[<ffffffff8125e95c>] ? ttm_bo_cleanup_refs_and_unlock+0x18c/0x2d0
[<ffffffff8125f17c>] ? ttm_mem_evict_first+0x1dc/0x2a0
[<ffffffff81264452>] ? ttm_bo_man_get_node+0x62/0xb0
[<ffffffff8125f4ce>] ? ttm_bo_mem_space+0x28e/0x340
[<ffffffff8125fb0c>] ? ttm_bo_move_buffer+0xfc/0x170
[<ffffffff810de172>] ? kmem_cache_alloc+0xb2/0xc0
[<ffffffff8125fc15>] ? ttm_bo_validate+0x95/0x110
[<ffffffff8125ff7c>] ? ttm_bo_init+0x2ec/0x3b0
[<ffffffff8129419a>] ? radeon_bo_create+0x18a/0x200
[<ffffffff81293e80>] ? radeon_bo_clear_va+0x40/0x40
[<ffffffff812a5342>] ? radeon_gem_object_create+0x92/0x160
[<ffffffff812a575c>] ? radeon_gem_create_ioctl+0x6c/0x150
[<ffffffff812a529f>] ? radeon_gem_object_free+0x2f/0x40
[<ffffffff81246b60>] ? drm_ioctl+0x420/0x4f0
[<ffffffff812a56f0>] ? radeon_gem_pwrite_ioctl+0x20/0x20
[<ffffffff810f53a4>] ? do_vfs_ioctl+0x2e4/0x4e0
[<ffffffff810e5588>] ? vfs_read+0x118/0x160
[<ffffffff810f55ec>] ? sys_ioctl+0x4c/0xa0
[<ffffffff810e5851>] ? sys_read+0x51/0xa0
[<ffffffff814b0612>] ? system_call_fastpath+0x16/0x1b
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Reported-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Acked-by: NPaul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Pull Xtensa patchset from Chris Zankel:
 "This contains support of device trees, many fixes, and code clean-ups"

* tag 'xtensa-20121218' of git://github.com/czankel/xtensa-linux: (33 commits)
  xtensa: don't try to build DTB when OF is disabled
  xtensa: set the correct ethernet address for xtfpga
  xtensa: clean up files to make them code-style compliant
  xtensa: provide endianness macro for sparse
  xtensa: fix RASID SR initialization
  xtensa: initialize CPENABLE SR when core has one
  xtensa: reset all timers on initialization
  Use for_each_compatible_node() macro.
  xtensa: add XTFPGA DTS
  xtensa: add support for the XTFPGA boards
  xtensa: add device trees support
  xtensa: add IRQ domains support
  xtensa: add U-Boot image support (uImage).
  xtensa: clean up boot make rules
  xtensa: fix mb and wmb definitions
  xtensa: add s32c1i-based spinlock implementations
  xtensa: add s32c1i-based bitops implementations
  xtensa: add s32c1i-based atomic ops implementations
  xtensa: add s32c1i sanity check
  xtensa: add trap_set_handler function
  ...

Pull one final 386 removal patch from Peter Anvin.

IRQ 13 FPU error handling is gone.  That was not one of the proudest
moments in PC history.

* 'x86/nuke386' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, 386 removal: Remove support for IRQ 13 FPU error reporting

Pull small x86 fixes from Peter Anvin:
 "A collection of very small fixes, mostly pure documentation."

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, doc: Document that bootloader ID 4 is used also by iPXE
  x86, doc: Add a formal bootloader ID for kexec-tools
  x86, 8042: Enable A20 using KBC to fix S3 resume on some MSI laptops

The driver description files gives these names to the vendor specific
functions on this modem:

 diag: VID_19D2&PID_0284&MI_00
 nmea: VID_19D2&PID_0284&MI_01
 at:   VID_19D2&PID_0284&MI_02
 mdm:  VID_19D2&PID_0284&MI_03
 net:  VID_19D2&PID_0284&MI_04
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add CONFIG_OF guard and use of_match_ptr macro.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This eliminates having an #ifdef returning NULL for the case
when OF is disabled.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

the value of err is always negative if it goes to errout, so we don't need to
check the value of err.
Signed-off-by: NCong Ding <dinggnu@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When dumping mdb table, set the addresses the kernel returns
based on the address protocol type.
Signed-off-by: NVlad Yasevich <vyasevic@redhat.com>
Acked-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Bridge fdb and link rtnl operations are registered in
core/rtnetlink.  Bridge mdb operations are registred
in bridge/mdb.  When removing bridge module, do not
unregister ALL PF_BRIDGE ops since that would remove
the ops from rtnetlink as well.  Do remove mdb ops when
bridge is destroyed.
Signed-off-by: NVlad Yasevich <vyasevic@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull MTD updates from David Woodhouse:
 - Various cleanups especially in NAND tests
 - Add support for NAND flash on BCMA bus
 - DT support for sh_flctl and denali NAND drivers
 - Kill obsolete/superceded drivers (fortunet, nomadik_nand)
 - Fix JFFS2 locking bug in ENOMEM failure path
 - New SPI flash chips, as usual
 - Support writing in 'reliable mode' for DiskOnChip G4
 - Debugfs support in nandsim

* tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd: (96 commits)
  mtd: nand: typo in nand_id_has_period() comments
  mtd: nand/gpio: use io{read,write}*_rep accessors
  mtd: block2mtd: throttle writes by calling balance_dirty_pages_ratelimited.
  mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems
  mtd: nand/docg4: fix and improve read of factory bbt
  mtd: nand/docg4: reserve bb marker area in ecclayout
  mtd: nand/docg4: add support for writing in reliable mode
  mtd: mxc_nand: reorder part_probes to let cmdline override other sources
  mtd: mxc_nand: fix unbalanced clk_disable() in error path
  mtd: nandsim: Introduce debugfs infrastructure
  mtd: physmap_of: error checking to prevent a NULL pointer dereference
  mtg: docg3: potential divide by zero in doc_write_oob()
  mtd: bcm47xxnflash: writing support
  mtd: tests/read: initialize buffer for whole next page
  mtd: at91: atmel_nand: return bit flips for the PMECC read_page()
  mtd: fix recovery after failed write-buffer operation in cfi_cmdset_0002.c
  mtd: nand: onfi need to be probed in 8 bits mode
  mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width
  mtd: nand: print flash size during detection
  mted: nand_wait_ready timeout fix
  ...

This covers the drivers that can use a primitive
implementation.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Centralise common code for manage_power() in usbnet
by making a generic simple implementation
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If a device fails to do remote wakeup, this is no reason
to abort an open totally. This patch just continues without
runtime PM.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ksz884x driver does receive processing in a custom tasklet, and
seems to be assuming that since it takes its private interface spinlock
with spin_lock_irq(), it won't be running concurrently with its own
interrupt handler, as it cannot be preempted by it, but since its
interrupt handler doesn't do any locking whatsoever, the receive
processing tasklet and interrupt handler can end up running concurrently
on different CPUs.

As a result of this, the ksz884x receive path ends up locking up fairly
easily, when the receive processing tasklet's reenabling of receive
interrupts (due to it being done with polling the receive ring) races
with the interrupt handler's disabling of receive interrupts (due to a
new receive interrupt coming in) resulting in the receive interrupt
being masked but the receive processing tasklet not being scheduled.

Fix this by making the ksz884x interrupt handler take its private
interface spinlock.  This requires upgrading the spin_lock() in the
transmit cleanup tasklet to a spin_lock_irq(), as otherwise the IRQ
handler can preempt transmit cleanup and deadlock the system, but
with those two changes, no more receive lockups have been observed.
Reported-by: NChris Healy <cphealy@gmail.com>
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>

----
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NSony Chacko <sony.chacko@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

qlcnic_hw.c:370: warning: variable cmd_desc set but not used
qlcnic_hw.c:368: warning: variable consumer set but not used
qlcnic_main.c:448: warning: variable ref_count set but not used
qlcnic_main.c:534: warning: variable mem_base set but not used
qlcnic_ctx.c:137: warning: variable tmp_tmpl set but not used
qlcnic_ctx.c:133: warning: variable version set but not used
qlcnic_minidump.c:200: warning: variable opcode set but not used
Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: NSony Chacko <sony.chacko@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 8d451690 ("watchdog: Fix CPU hotplug regression") causes an
oops or hard lockup when doing

 echo 0 > /proc/sys/kernel/nmi_watchdog
 echo 1 > /proc/sys/kernel/nmi_watchdog

and the kernel is booted with nmi_watchdog=1 (default)

Running laptop-mode-tools and disconnecting/connecting AC power will
cause this to trigger, making it a common failure scenario on laptops.

Instead of bailing out of watchdog_disable() when !watchdog_enabled we
can initialize the hrtimer regardless of watchdog_enabled status.  This
makes it safe to call watchdog_disable() in the nmi_watchdog=0 case,
without the negative effect on the enabled => disabled => enabled case.

All these tests pass with this patch:
- nmi_watchdog=1
  echo 0 > /proc/sys/kernel/nmi_watchdog
  echo 1 > /proc/sys/kernel/nmi_watchdog

- nmi_watchdog=0
  echo 0 > /sys/devices/system/cpu/cpu1/online

- nmi_watchdog=0
  echo mem > /sys/power/state

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=51661

Cc: <stable@vger.kernel.org> # v3.7
Cc: Norbert Warmuth <nwarmuth@t-online.de>
Cc: Joseph Salisbury <joseph.salisbury@canonical.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

Pull pwm changes from Thierry Reding:
 "A new driver has been added for the SPEAr platform and the
  TWL4030/6030 driver has been replaced by two drivers that control the
  regular PWMs and the PWM driven LEDs provided by the chips.

  The vt8500, tiecap, tiehrpwm, i.MX, LPC32xx and Samsung drivers have
  all been improved and the device tree bindings now support the PWM
  signal polarity."

Fix up trivial conflicts due to __devinit/exit removal.

* tag 'for-3.8-rc1' of git://gitorious.org/linux-pwm/linux-pwm: (21 commits)
  pwm: samsung: add missing s3c->pwm_id assignment
  pwm: lpc32xx: Set the chip base for dynamic allocation
  pwm: lpc32xx: Properly disable the clock on device removal
  pwm: lpc32xx: Fix the PWM polarity
  pwm: i.MX: eliminate build warning
  pwm: Export of_pwm_xlate_with_flags()
  pwm: Remove pwm-twl6030 driver
  pwm: New driver to support PWM driven LEDs on TWL4030/6030 series of PMICs
  pwm: New driver to support PWMs on TWL4030/6030 series of PMICs
  pwm: pwm-tiehrpwm: pinctrl support
  pwm: tiehrpwm: Add device-tree binding
  pwm: pwm-tiehrpwm: Adding TBCLK gating support.
  pwm: pwm-tiecap: pinctrl support
  pwm: tiecap: Add device-tree binding
  pwm: Add TI PWM subsystem driver
  pwm: Device tree support for PWM polarity
  pwm: vt8500: Ensure PWM clock is enabled during pwm_config
  pwm: vt8500: Fix build error
  pwm: spear: Staticize spear_pwm_config()
  pwm: Add SPEAr PWM chip driver support
  ...

Fixes the following warning:

include/linux/of_platform.h:106:13: warning: 'struct device' declared
inside parameter list [enabled by default]
include/linux/of_platform.h:106:13: warning: its scope is only this
definition or declaration, which is probably not what you want [enabled
by default]
Signed-off-by: NJonas Gorski <jogo@openwrt.org>
Signed-off-by: NRob Herring <robherring2@gmail.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Pull battery update, part 2, from Anton Vorontsov:
 "These are left overs that I didn't have time to review/apply before
  the merge window opened.  I didn't want to "spoil" the first pull
  request with these late patches, so they were not included:

   - A small patch for the RX51 OMAP board (Nokia N900 phone), the patch
     creates a battery monitor device instance, so that it can be
     probed.  It was acked by the OMAP maintainer;

   - A couple of late bug fixes for the charger-manager: corrects corner
     cases for the battery full handling."

* tag 'for-v3.8-part2' of git://git.infradead.org/battery-2.6:
  charger-manager: Fix bug when check dropped voltage after fullbatt event
  charger-manager: Fix bug related to checking fully charged state of battery
  ARM: OMAP: rx51: Register platform device for rx51_battery

Pull module update from Rusty Russell:
 "Nothing all that exciting; a new module-from-fd syscall for those who
  want to verify the source of the module (ChromeOS) and/or use standard
  IMA on it or other security hooks."

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  MODSIGN: Fix kbuild output when using default extra_certificates
  MODSIGN: Avoid using .incbin in C source
  modules: don't hand 0 to vmalloc.
  module: Remove a extra null character at the top of module->strtab.
  ASN.1: Use the ASN1_LONG_TAG and ASN1_INDEFINITE_LENGTH constants
  ASN.1: Define indefinite length marker constant
  moduleparam: use __UNIQUE_ID()
  __UNIQUE_ID()
  MODSIGN: Add modules_sign make target
  powerpc: add finit_module syscall.
  ima: support new kernel module syscall
  add finit_module syscall to asm-generic
  ARM: add finit_module syscall to ARM
  security: introduce kernel_module_from_file hook
  module: add flags arg to sys_finit_module()
  module: add syscall to load module from fd

Pull preparatory gcc intrisics bswap patch from David Woodhouse:
 "This single patch is effectively a no-op for now.  It enables
  architectures to opt in to using GCC's __builtin_bswapXX() intrinsics
  for byteswapping, and if we merge this now then the architecture
  maintainers can enable it for their arch during the next cycle without
  dependency issues.

  It's worth making it a par-arch opt-in, because although in *theory*
  the compiler should never do worse than hand-coded assembler (and of
  course it also ought to do a lot better on platforms like Atom and
  PowerPC which have load-and-swap or store-and-swap instructions), that
  isn't always the case.  See

     http://gcc.gnu.org/bugzilla/show_bug.cgi?id=46453

  for example."

* tag 'byteswap-for-linus-20121219' of git://git.infradead.org/users/dwmw2/byteswap:
  byteorder: allow arch to opt to use GCC intrinsics for byteswapping

Commit 8dd2cb7e ("block: discard granularity might not be power of
2") changed a couple of 'binary and' operations into modulus operations.
Which turned the harmless case of a zero discard_granularity into a
possible divide-by-zero.

The code also had a much more subtle bug: it was doing the modulus of a
value in bytes using 'sector_t'.  That was always conceptually wrong,
but didn't actually matter back when the code assumed a power-of-two
granularity: we only looked at the low bits anyway.

But with potentially arbitrary sector numbers, using a 'sector_t' to
express bytes is very very wrong: depending on configuration it limits
the starting offset of the device to just 32 bits, and any overflow
would result in a wrong value if the modulus wasn't a power-of-two.

So re-write the code to not only protect against the divide-by-zero, but
to do the starting sector arithmetic in sectors, and using the proper
types.

[ For any mathematicians out there: it also looks monumentally stupid to
  do the 'modulo granularity' operation *twice*, never mind having a "+
  granularity" in the second modulus op.

  But that's the easiest way to avoid negative values or overflow, and
  it is how the original code was done. ]
Reported-by: NIngo Molnar <mingo@kernel.org>
Reported-by: NDoug Anderson <dianders@chromium.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Shaohua Li <shli@fusionio.com>
Acked-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

According to its documentation, clk_get() returns a "valid IS_ERR() condition
containing errno", so we should call IS_ERR() rather than a NULL check.
Signed-off-by: NCyril Roelandt <tipecaml@gmail.com>
Acked-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Fix name of slink binding and address of sflash example to make it
self consistent.
Signed-off-by: NAllen Martin <amartin@nvidia.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Commit 50c8af4c, "of: introduce for_each_matching_node_and_match()"
renamed of_find_matching_node() to of_find_matching_node_and_match() and
created a new static inline of_find_matching_node() wrapper around the
new name. However, the change neglected to change the EXPORT_SYMBOL()
reference causing build errors for modules.

This patch fixes the EXPORT_SYMBOL() statement. Discovered on a PowerPC
Efika build with the mpc52xx_uart driver being built as a module.
Reported-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NChris Zankel <chris@zankel.net>