- 31 5月, 2013 13 次提交
-
-
由 Michal Simek 提交于
Correct email address and years. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Simek 提交于
Enable emaclite for Xilinx ARM Zynq platform. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Simek 提交于
Emaclite can be used on ARM zynq where in_be32/out_be32 IO functions are not present. Use standard __raw_readl/__raw_writel IO functions instead. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Simek 提交于
xemaclite_adjust_link is used locally. It removes sparse warning: drivers/net/ethernet/xilinx/xilinx_emaclite.c:916:6: warning: symbol 'xemaclite_adjust_link' was not declared. Should it be static? Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Simek 提交于
For system which contains at least two ethernet IP where one IP manage MDIO bus with several PHYs. Example dts node: ethernet_mac0: ethernet@81000000 { compatible = "xlnx,xps-ethernetlite-1.00.a"; device_type = "network"; interrupt-parent = <&xps_intc_0>; interrupts = < 1 0 >; local-mac-address = [ 00 0a 35 00 db bb ]; phy-handle = <ðernet_mac0_phy0>; reg = < 0x81000000 0x10000 >; xlnx,duplex = <0x1>; xlnx,family = "spartan3e"; xlnx,include-internal-loopback = <0x0>; xlnx,include-mdio = <0x1>; xlnx,rx-ping-pong = <0x0>; xlnx,tx-ping-pong = <0x0>; ethernet_mac0_mdio { #address-cells = <1>; #size-cells = <0>; ethernet_mac0_phy0: phy@1 { reg = <0x1>; } ; ethernet_mac0_phy1: phy@3 { reg = <0x3>; } ; } ; } ; ethernet_mac2: ethernet@81040000 { compatible = "xlnx,xps-ethernetlite-1.00.a"; device_type = "network"; interrupt-parent = <&xps_intc_0>; interrupts = < 11 0 >; local-mac-address = [ 00 0a 35 00 db bb ]; phy-handle = <ðernet_mac0_phy1>; reg = < 0x81040000 0x10000 >; xlnx,duplex = <0x1>; xlnx,family = "spartan3e"; xlnx,include-internal-loopback = <0x0>; xlnx,include-mdio = <0x0>; xlnx,rx-ping-pong = <0x0>; xlnx,tx-ping-pong = <0x0>; } ; Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Simek 提交于
Be more verbose when any problem happens. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Manish Chopra says: ==================== This patch series includes following changes: * Log driver version information with firmware version information. * Log "Unknown" adapter name and serial number in case of mismatched adapter type. * netxen_setup_intr() function code cleanup and changes to avoid attaching of multiple pci functions on an adapter with mixed interrupts mode [MSI-X/MSI + INTx]. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
o Adapters do not support co-existence of INTx Interrupt with MSI-X or MSI among multiple functions. Prevent attaching of a function during normal load, if adapter gets into mixed mode of interrupts Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
o log "Unknown" board name and "Unknown" serial number in case of mismatched adapter type found. This will avoid weird characters logs when an adapter is in bad state or corrupted. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.open-mesh.org/linux-merge由 David S. Miller 提交于
Included changes: - reduce broadcast overhead on non-lossy wired links - fix typos in kernel doc - use eth_hdr() when possible - use netdev_allock_skb_ip_align() and don't deal with NET_IP_ALIGN - change VID semantic in the BLA component - other minor cleanups and code refactoring Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 5月, 2013 27 次提交
-
-
由 Andy Shevchenko 提交于
Instead of dereferencing pointer and put values on stack we could use nice %*phC specifier. Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
Signed-off-by: NVeaceslav Falico <vfalico@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
After b924551b ("bonding: fix enslaving in alb mode when link down") we don't need the bond parameter in alb_swap_mac_addr(), so remove it. Signed-off-by: NVeaceslav Falico <vfalico@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cong Wang 提交于
When vxlan is compiled as builtin, its init code runs before IPv6 init, this could cause problems if we create IPv6 socket in the latter patch. Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <amwang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cong Wang 提交于
'unsigned int' is slightly better. Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <amwang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cong Wang 提交于
Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <amwang@redhat.com> Acked-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
This corrects an regression introduced by "net: Use 16bits for *_headers fields of struct skbuff" when NET_SKBUFF_DATA_USES_OFFSET is not set. In that case skb->tail will be a pointer however skb->network_header is now an offset. This patch corrects the problem by adding a wrapper to return skb tail as an offset regardless of the value of NET_SKBUFF_DATA_USES_OFFSET. It seems that skb->tail that this offset may be more than 64k and some care has been taken to treat such cases as an error. Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
This corrects an regression introduced by "net: Use 16bits for *_headers fields of struct skbuff" when NET_SKBUFF_DATA_USES_OFFSET is not set. In that case sk_buff_data_t will be a pointer, however, skb->{network,transport}_header is now __u16. Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
This corrects an regression introduced by "net: Use 16bits for *_headers fields of struct skbuff" when NET_SKBUFF_DATA_USES_OFFSET is not set. In that case skb->tail will be a pointer whereas skb->transport_header will be an offset from head. This is corrected by using wrappers that ensure that comparisons and calculations are always made using pointers. Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
This corrects an regression introduced by "net: Use 16bits for *_headers fields of struct skbuff" when NET_SKBUFF_DATA_USES_OFFSET is not set. In that case skb->tail will be a pointer whereas skb->transport_header will be an offset from head. This is corrected by using wrappers that ensure that comparisons and calculations are always made using pointers. Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
This corrects an regression introduced by "net: Use 16bits for *_headers fields of struct skbuff" when NET_SKBUFF_DATA_USES_OFFSET is not set. In that case skb->tail will be a pointer whereas skb->transport_header will be an offset from head. This is corrected by using wrappers that ensure that comparisons and calculations are always made using pointers. Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
This corrects an regression introduced by "net: Use 16bits for *_headers fields of struct skbuff" when NET_SKBUFF_DATA_USES_OFFSET is not set. In that case skb->tail will be a pointer whereas skb->transport_header will be an offset from head. This is corrected by using wrappers that ensure that comparisons and calculations are always made using pointers. Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
This corrects an regression introduced by "net: Use 16bits for *_headers fields of struct skbuff" when NET_SKBUFF_DATA_USES_OFFSET is not set. In that case skb->tail will be a pointer whereas skb->transport_header will be an offset from head. This is corrected by using wrappers that ensure that the comparison is always between pointers. Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cong Wang 提交于
commit 351638e7 (net: pass info struct via netdevice notifier) breaks booting of my KVM guest, this is due to we still forget to pass struct netdev_notifier_info in several places. This patch completes it. Cc: Jiri Pirko <jiri@resnulli.us> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <amwang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Wunderlich 提交于
Signed-off-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-
由 Martin Hundebøll 提交于
The call to batadv_nc_skb_forward() fits better in batadv_send_skb_to_orig(), as this is where the actual next hop is looked up. To let the caller of batadv_send_skb_to_orig() know wether the skb is transmitted, buffered or failed, the return value is changed from boolean to int. Signed-off-by: NMartin Hundebøll <martin@hundeboll.net> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-
由 Antonio Quartulli 提交于
Since the MSB bits of any vid variable are now used for storing flags, print the vid properly by taking the flags away and printing -1 in case of VID representing no real VLAN. Signed-off-by: NAntonio Quartulli <antonio@open-mesh.com> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Antonio Quartulli 提交于
In order to make batman-adv fully vlan aware later, the semantic used for variables storing the VLAN ID values has to be changed in order to be adapted to the new one which will be used batman-adv wide. In particular, the VID has to be an "_unsigned_ short int" and its 4 MSB will be used as a flag bitfield, while the remaining 12 bits are used to store the real VID value Signed-off-by: NAntonio Quartulli <antonio@open-mesh.com> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Acked-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de>
-
由 Marek Lindner 提交于
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-
由 Linus Lüssing 提交于
There's no need to for an explicit hlist_node initialization if it is added to a list right away, like it's the case with the hlist_add_head()s here. Signed-off-by: NLinus Lüssing <linus.luessing@web.de> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-
由 Antonio Quartulli 提交于
it may be the case that we want to store some local TT client flags in a global entry, therefore the tt_global_add needs to get a proper argument for this Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Antonio Quartulli 提交于
Instead of dealing with NET_IP_ALIGN during allocation and headroom reservation, it is possible to use netdev_alloc_skb_ip_align() which transparently allocate and reserve the correct amount of data Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Antonio Quartulli 提交于
Instead of passing a generic combination of flags as argument, it is easier to pass the entire tt_common structure (containing the flags already set) plus a bitfield of event flags that will be unified with the already existing ones before inserting the client in the event queue. In this way invocations of the modified function can be simplified. Signed-off-by: NAntonio Quartulli <antonio@open-mesh.com> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Antonio Quartulli 提交于
batadv_slide_own_bcast_window() is used only in bat_iv_ogm.c and it is currently touching only batman_iv specific attributes. Move it into bat_iv_ogm.c and make it static. Signed-off-by: NAntonio Quartulli <antonio@open-mesh.com> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Antonio Quartulli 提交于
the two lonely ring_buffer helper functions are used by the bat_iv_ogm module only and therefore they can be moved inside it. Reported-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Antonio Quartulli 提交于
Instead of casting the result of skb_mac_header() to "struct ethhdr *" every time, the eth_hdr inline function can be use to beautify the code and improve its readability. Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Antonio Quartulli 提交于
hard-interface.c has to do not contain any routing algorithm specific code. Allocate the hard-interface with kzalloc() and remove any useless and algorithm specific member initialisation Signed-off-by: NAntonio Quartulli <antonio@open-mesh.com> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-