- 27 7月, 2006 2 次提交
-
-
由 Francois Romieu 提交于
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
-
由 Francois Romieu 提交于
Fix for http://bugzilla.kernel.org/show_bug.cgi?id=6032. Cc: Tim Mattox <tmattox@gmail.com> Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
-
- 26 7月, 2006 9 次提交
-
-
由 Christoph Hellwig 提交于
This fixes three drivers to compile again after my patch that removes the data_cmnd member from struct scsi_cmnd. The fas216 change is trivial, it should have been using ->cmnd all the time. NCR53C9 (which seem to be mostly duplicate driver with esp.c!) is doing something odd, it should only have looked at ->cmnd before not the saved copy that is kept for the error handlers sake. Note that it really should deal with the sync setting themselves but use the generic domain validation code that get this right - but that's for later let's push this simple compile fix for now. And sorry for the late fix for this, I have been busy with OLS and associated activities last week. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SCSI] esp: Fix build. [SPARC]: Fix SA_STATIC_ALLOC value. [SPARC64]: Explicitly print return PC when the kernel fault PC is bogus.
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IPV4/IPV6]: Setting 0 for unused port field in RAW IP recvmsg(). [IPV4] ipmr: ip multicast route bug fix. [TG3]: Update version and reldate [TG3]: Handle tg3_init_rings() failures [TG3]: Add tg3_restart_hw() [IPV4]: Clear the whole IPCB, this clears also IPCB(skb)->flags. [IPV6]: Clean skb cb on IPv6 input. [NETFILTER]: Demote xt_sctp to EXPERIMENTAL [NETFILTER]: bridge netfilter: add deferred output hooks to feature-removal-schedule [NETFILTER]: xt_pkttype: fix mismatches on locally generated packets [NETFILTER]: SNMP NAT: fix byteorder confusion [NETFILTER]: conntrack: fix SYSCTL=n compile [NETFILTER]: nf_queue: handle NF_STOP and unknown verdicts in nf_reinject [NETFILTER]: H.323 helper: fix possible NULL-ptr dereference
-
由 Arjan van de Ven 提交于
The patch below moves the cpu hotplugging higher up in the cpufreq layering; this is needed to avoid recursive taking of the cpu hotplug lock and to otherwise detangle the mess. The new rules are: 1. you must do lock_cpu_hotplug() around the following functions: __cpufreq_driver_target __cpufreq_governor (for CPUFREQ_GOV_LIMITS operation only) __cpufreq_set_policy 2. governer methods (.governer) must NOT take the lock_cpu_hotplug() lock in any way; they are called with the lock taken already 3. if your governer spawns a thread that does things, like calling __cpufreq_driver_target, your thread must honor rule #1. 4. the policy lock and other cpufreq internal locks nest within the lock_cpu_hotplug() lock. I'm not entirely happy about how the __cpufreq_governor rule ended up (conditional locking rule depending on the argument) but basically all callers pass this as a constant so it's not too horrible. The patch also removes the cpufreq_governor() function since during the locking audit it turned out to be entirely unused (so no need to fix it) The patch works on my testbox, but it could use more testing (otoh... it can't be much worse than the current code) Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tetsuo Handa 提交于
From: Tetsuo Handa from-linux-kernel@i-love.sakura.ne.jp The recvmsg() for raw socket seems to return random u16 value from the kernel stack memory since port field is not initialized. But I'm not sure this patch is correct. Does raw socket return any information stored in port field? [ BSD defines RAW IP recvmsg to return a sin_port value of zero. This is described in Steven's TCP/IP Illustrated Volume 2 on page 1055, which is discussing the BSD rip_input() implementation. ] Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Kuznetsov 提交于
IP multicast route code was reusing an skb which causes use after free and double free. From: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Note, it is real skb_clone(), not alloc_skb(). Equeued skb contains the whole half-prepared netlink message plus room for the rest. It could be also skb_copy(), if we want to be puristic about mangling cloned data, but original copy is really not going to be used. Acked-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Update version to 3.63. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Handle dev_alloc_skb() failures when initializing the RX rings. Without proper handling, the driver will crash when using a partial ring. Thanks to Stephane Doyon <sdoyon@max-t.com> for reporting the bug and providing the initial patch. Howie Xu <howie@vmware.com> also reported the same issue. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add tg3_restart_hw() to handle failures when re-initializing the device. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 7月, 2006 29 次提交
-
-
由 Jens Axboe 提交于
The CIC_SEEKY() test really wants to use the minimum of either: - 2 msecs (not jiffies) - or, the pending slice time So code it like that. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Milton Miller 提交于
It should be toggling the same bit on and off, fix it up. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jens Axboe 提交于
We need to postpone the queue startup until after the softirq handler has actually finished some requests, otherwise we could be racing with cciss_softirq_done() and not actually restart the queue handling. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Guillaume Chazarain 提交于
Signed-off-by: NGuillaume Chazarain <guichaz@yahoo.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guillaume Chazarain 提交于
Clear the accumulated junk in IP6CB when starting to handle an IPV6 packet. Signed-off-by: NGuillaume Chazarain <guichaz@yahoo.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
After the recent problems with all the SCTP stuff it seems reasonable to mark this as experimental. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Add bridge netfilter deferred output hooks to feature-removal-schedule and disable them by default. Until their removal they will be activated by the physdev match when needed. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Phil Oester 提交于
Locally generated broadcast and multicast packets have pkttype set to PACKET_LOOPBACK instead of PACKET_BROADCAST or PACKET_MULTICAST. This causes the pkttype match to fail to match packets of either type. The below patch remedies this by using the daddr as a hint as to broadcast|multicast. While not pretty, this seems like the only way to solve the problem short of just noting this as a limitation of the match. This resolves netfilter bugzilla #484 Signed-off-by: NPhil Oester <kernel@linuxace.com> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
In case of an unknown verdict or NF_STOP the packet leaks. Unknown verdicts can happen when userspace is buggy. Reinject the packet in case of NF_STOP, drop on unknown verdicts. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
An RCF message containing a timeout results in a NULL-ptr dereference if no RRQ has been seen before. Noticed by the "SATURN tool", reported by Thomas Dillig <tdillig@stanford.edu> and Isil Dillig <isil@stanford.edu>. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
The data_cmd[] member got deleted, so do not use it any more. Scsi commands do not have their ->cmd[] overwritten temporary to probe for status after an error before retrying. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
It alises IRQF_SHARED which causes all kinds of problems. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
That way we'll have at least some debugging info even if the stack dump explodes. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christoph Hellwig 提交于
dev_alloc_skb is designated for RX descriptors, not TX. (Some drivers use it for the latter anyway, but that's a different story) Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christoph Hellwig 提交于
skbuff.h has an #ifndef CONFIG_HAVE_ARCH_DEV_ALLOC_SKB to allow architectures to reimplement __dev_alloc_skb. It's not set on any architecture and now that we have an architecture-overrideable NET_SKB_PAD there is not point at all to have one either. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Rompf 提交于
When the queue of the underlying device is stopped at initialization time or the device is marked "not present", the state will be propagated to the vlan device and never change. Based on an analysis by Patrick McHardy. Signed-off-by: NStefan Rompf <stefan@loplof.de> ACKed-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
It doesn't compile, and it's dubious in several regards: 1) is enabled by non-Kconfig controlled CONFIG_* value (noted by Randy Dunlap) 2) XFRM6_TUNNEL_SPI_MAGIC is defined after it's first use 3) the debugging messages print object pointer addresses which have no meaning without context So let's just get rid of it. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marcel Holtmann 提交于
The Broadcom dongles with HID proxy support actually support SCO over HCI if the SCO buffer size values are corrected. So instead of disabling the SCO support, mark this dongle with the quirk for the Bluetooth core to correct the wrong buffer size values. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
This patch disables the ISOC transfers for another broken RTX Telecom based USB dongle. Starting the USB ISOC transfers only ends in a burst of error messages for invalid SCO packets on connection handle 0. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
The Belkin F8T012 and F8T013 devices are both based on a Bluetooth chip from Broadcom and their SCO buffer size values are wrong. The Bluetooth core should correct these values. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
The SCO buffer size values on IBM/Lenovo ThinkPad laptops with a Bluetooth chip from Broadcom are wrong. The USB Bluetooth driver has to set a quirk to correct the SCO buffer size values. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
Some Bluetooth RFCOMM implementations try to negotiate a bigger channel MTU than we can support for a particular session. The maximum MTU for a RFCOMM session is limited through the L2CAP layer. So if the other side proposes a channel MTU that is bigger than the underlying L2CAP MTU, we should reduce it to the L2CAP MTU of the session minus five bytes for the RFCOMM headers. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Guillaume Chazarain 提交于
In PSCHED_TADD and PSCHED_TADD2, if delta is less than tv.tv_usec (so, less than USEC_PER_SEC too) then tv_res will be smaller than tv. The affectation "(tv_res).tv_usec = __delta;" is wrong. The fix is to revert to the original code before 4ee303df and change the 'if' in 'while'. [Shuya MAEDA: "while (__delta >= USEC_PER_SEC){ ... }" instead of "while (__delta > USEC_PER_SEC){ ... }"] Signed-off-by: NGuillaume Chazarain <guichaz@yahoo.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ian McDonald 提交于
When using the default sequence window size (100) I got the following in my logs: Jun 22 14:24:09 localhost kernel: [ 1492.114775] DCCP: Step 6 failed for DATA packet, (LSWL(6279674225) <= P.seqno(6279674749) <= S.SWH(6279674324)) and (P.ackno doesn't exist or LAWL(18798206530) <= P.ackno(1125899906842620) <= S.AWH(18798206548), sending SYNC... Jun 22 14:24:09 localhost kernel: [ 1492.115147] DCCP: Step 6 failed for DATA packet, (LSWL(6279674225) <= P.seqno(6279674750) <= S.SWH(6279674324)) and (P.ackno doesn't exist or LAWL(18798206530) <= P.ackno(1125899906842620) <= S.AWH(18798206549), sending SYNC... I went to alter the default sysctl and it didn't take for new sockets. Below patch fixes this. I think the default is too low but it is what the DCCP spec specifies. As a side effect of this my rx speed using iperf goes from about 2.8 Mbits/sec to 3.5. This is still far too slow but it is a step in the right direction. Compile tested only for IPv6 but not particularly complex change. Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roland Dreier 提交于
Read the max_cmds value from the response to the QUERY_FW command before printing out the value, so that the real value goes into the debug output. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Michael S. Tsirkin 提交于
The neighbour ha field may get updated without destroying the neighbour. In this case, the ha field gets out of sync with the address handle stored in ipoib_neigh->ah, with the result that the ah field would point to an incorrect path, resulting in all packets being lost. Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Or Gerlitz 提交于
Need to set mcast->ah before debug code dereferences it. Signed-off-by: NOr Gerlitz <ogerlitz@voltaire.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-