- 21 4月, 2009 1 次提交
-
-
由 Steve Wise 提交于
NFS/RDMA currently fails to set up connections if peer2peer is on. This is due to the fact that the NFS/RDMA client sets its ORD to 0. If peer2peer is set, make sure the active side ORD is >= 1 and the passive side IRD is >=1. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 30 3月, 2009 2 次提交
-
-
由 Steve Wise 提交于
The cxgb3 l2t entry, hwtid, and dst entry were being released before all the iwch_ep references were released. This can cause a crash in t3_l2t_send_slow() and other places where the l2t entry is used. The fix is to defer releasing these resources until all endpoint references are gone. Details: - move flags field to the iwch_ep_common struct. - add a flag indicating resources are to be released. - release resources at endpoint free time instead of close/abort time. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Steve Wise 提交于
- wrap calls into cxgb3 and fail them if we're in the middle of a PCI EEH event. - correctly unwind and release endpoint and other resources when we are in an EEH event. - dispatch IB_EVENT_DEVICE_FATAL event when cxgb3 notifies iw_cxgb3 of a fatal error. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 11 2月, 2009 1 次提交
-
-
由 Steve Wise 提交于
The poll and flush code needs to handle all send opcodes: SEND, SEND_WITH_SE, SEND_WITH_INV, and SEND_WITH_SE_INV. Ignore TERM indications if the connection already gone. Ignore HW receive completions if the RQ is empty. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 16 10月, 2008 1 次提交
-
-
由 Steve Wise 提交于
The error path in iwch_connect() can fail to drop the cmid reference, which will cause the process to hang when destroying the cmid. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 03 5月, 2008 2 次提交
-
-
由 Steve Wise 提交于
Testing on large clusters shows its way too short at 10 secs. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Steve Wise 提交于
Remove bad BUG_ON() that can trigger in correct operation from close_con_rpl(). It is possible to get a close_rpl message on a dead connection. The sequence is: - host refs ep for close exchange - host posts close_req - hw posts PEER_ABORT from incoming RST - host marks ep DEAD - host posts ABORT_RPL and releases ep resources - hw posts CLOSE_RPL - host derefs ep and ep freed. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 30 4月, 2008 2 次提交
-
-
由 Steve Wise 提交于
Open MPI, Intel MPI and other applications don't respect the iWARP requirement that the client (active) side of the connection send the first RDMA message. This class of application connection setup is called peer-to-peer. Typically once the connection is setup, _both_ sides want to send data. This patch enables supporting peer-to-peer over the chelsio RNIC by enforcing this iWARP requirement in the driver itself as part of RDMA connection setup. Connection setup is extended, when the peer2peer module option is 1, such that the MPA initiator will send a 0B Read (the RTR) just after connection setup. The MPA responder will suspend SQ processing until the RTR message is received and reply-to. In the longer term, this will be handled in a standardized way by enhancing the MPA negotiation so peers can indicate whether they want/need the RTR and what type of RTR (0B read, 0B write, or 0B send) should be sent. This will be done by standardizing a few bits of the private data in order to negotiate all this. However this patch enables peer-to-peer applications now and allows most of the required firmware and driver changes to be done and tested now. Design: - Add a module option, peer2peer, to enable this mode. - New firmware support for peer-to-peer mode: - a new bit in the rdma_init WR to tell it to do peer-2-peer and what form of RTR message to send or expect. - process _all_ preposted recvs before moving the connection into rdma mode. - passive side: defer completing the rdma_init WR until all pre-posted recvs are processed. Suspend SQ processing until the RTR is received. - active side: expect and process the 0B read WR on offload TX queue. Defer completing the rdma_init WR until all pre-posted recvs are processed. Suspend SQ processing until the 0B read WR is processed from the offload TX queue. - If peer2peer is set, driver posts 0B read request on offload TX queue just after posting the rdma_init WR to the offload TX queue. - Add CQ poll logic to ignore unsolicitied read responses. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Steve Wise 提交于
Open MPI and other stress testing exposed a few bad bugs in handling aborts in the middle of a normal close. Fix these by: - serializing abort reply and peer abort processing with disconnect processing - warning (and ignoring) if ep timer is stopped when it wasn't running - cleaning up disconnect path to correctly deal with aborting and dead endpoints - in iwch_modify_qp(), taking a ref on the ep before releasing the qp lock if iwch_ep_disconnect() will be called. The ref is dropped after calling disconnect. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 17 4月, 2008 1 次提交
-
-
由 Harvey Harrison 提交于
__FUNCTION__ is gcc-specific, use __func__ instead. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 29 3月, 2008 1 次提交
-
-
由 Roland Dreier 提交于
Because of a typo in iwch_accept_cr(), the cxgb3 connection handling code programs the hardware IRD (incoming RDMA read queue depth) with the value that is passed in for the ORD (outgoing RDMA read queue depth). In particular this means that if an application passes in IRD > 0 and ORD = 0 (which is a completely sane and valid thing to do for an app that expects only incoming RDMA read requests), then the hardware will end up programmed with IRD = 0 and the app will fail in a mysterious way. Fix this by using "ep->ird" instead of "ep->ord" in the intended place. Signed-off-by: NRoland Dreier <rolandd@cisco.com> Acked-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 2月, 2008 1 次提交
-
-
由 Steve Wise 提交于
The cxgb3 HW and driver don't support loopback RDMA connections. So fail any connection attempt where the destination address is local. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 29 1月, 2008 1 次提交
-
-
由 Denis V. Lunev 提交于
Needed to propagate it down to the __ip_route_output_key. Signed_off_by: Denis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 1月, 2008 1 次提交
-
-
由 Steve Wise 提交于
Correctly work around T3A issues by checking "hwtype != T3A" instead of "hwtype == T3B". This will be needed for new hardware types. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 10 10月, 2007 1 次提交
-
-
由 Steve Wise 提交于
Allow changing parameter values without having to reload the module. This is safe because these parameters are only looked at when a new connection is established. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 04 8月, 2007 1 次提交
-
-
由 Steve Wise 提交于
This avoids deadlocks. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 20 7月, 2007 1 次提交
-
-
由 Yoann Padioleau 提交于
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc). Here is a short excerpt of the semantic patch performing this transformation: @@ type T2; expression x; identifier f,fld; expression E; expression E1,E2; expression e1,e2,e3,y; statement S; @@ x = - kmalloc + kzalloc (E1,E2) ... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\) - memset((T2)x,0,E1); @@ expression E1,E2,E3; @@ - kzalloc(E1 * E2,E3) + kcalloc(E1,E2,E3) [akpm@linux-foundation.org: get kcalloc args the right way around] Signed-off-by: NYoann Padioleau <padator@wanadoo.fr> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: NRussell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Acked-by: NJiri Slaby <jirislaby@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Acked-by: NRoland Dreier <rolandd@cisco.com> Cc: Jiri Kosina <jkosina@suse.cz> Acked-by: NDmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NMauro Carvalho Chehab <mchehab@infradead.org> Acked-by: NPierre Ossman <drzeus-list@drzeus.cx> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: NGreg KH <greg@kroah.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 7月, 2007 1 次提交
-
-
由 Steve Wise 提交于
Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 10 7月, 2007 4 次提交
-
-
由 Steve Wise 提交于
This bug results in an abort request being sent down _after_ the tid has been released. If the tid happens to have been reused, then the subsequent generation of the tid gets incorrectly aborted. The thread running iwch_accecpt_cr() must not abort a connection if an error is returned after being awakened. If any errors did occur while iwch_accept_cr() is blocked, then the connection has already been aborted on the thread processing the error. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Steve Wise 提交于
The LLD does this for us in cxgb3_remove_tid(). Also fixed active open failure cases where we also shouldn't be releasing the TID. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Steve Wise 提交于
Negative advice messages should _not_ count toward the 2 abort requests needed to indicate an abort request. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Steve Wise 提交于
Due to a HW issue, our current scheme to transition the connection from streaming to rdma mode is broken on the passive side. The firmware and driver now support a new transition scheme for the passive side: - driver posts rdma_init_wr (now including the initial receive seqno) - driver posts last streaming message via TX_DATA message (MPA start response) - uP atomically sends the last streaming message and transitions the tcb to rdma mode. - driver waits for wr_ack indicating the last streaming message was ACKed. NOTE: This change also bumps the required firmware version to 4.3. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 07 5月, 2007 1 次提交
-
-
由 Steve Wise 提交于
The HW now posts 2 ABORT_RPL and/or PEER_ABORT_REQ messages. We need to handle them by silenty dropping the 1st but mark that we're ready for the final message. This plugs some close races between the uP and HW. Also update the minimum required firmware version. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 01 5月, 2007 1 次提交
-
-
由 Steve Wise 提交于
Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 26 4月, 2007 3 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
To clearly state the intent of copying from linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
Now to convert the last one, skb->data, that will allow many simplifications and removal of some of the offset helpers. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
For the common, open coded 'skb->h.raw = skb->data' operation, so that we can later turn skb->h.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple cases: skb->h.raw = skb->data; skb->h.raw = {skb_push|[__]skb_pull}() The next ones will handle the slightly more "complex" cases. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 4月, 2007 1 次提交
-
-
由 Steve Wise 提交于
As of commit 6cdbd77e ("cxgb3 - missing CPL hanler and register setting."), the cxgb3 ethernet NIC driver no longer handles SET_TCB replies, so we need to do it in the iWARP driver. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Acked-by: NDivy Le Ray <divy@chelsio.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 07 3月, 2007 4 次提交
-
-
由 Steve Wise 提交于
Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Steve Wise 提交于
Stop the endpoint timer when the MPA exchange is aborted by the peer. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Steve Wise 提交于
Fixes for "normal close" failures: - Start normal close timer when moving to CLOSING state. - Handle ABORTING state in close_con_rpl(). - Stop timer correctly on abort during a normal close. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Steve Wise 提交于
If the consumer rejects the connection we end up under-referencing the endpoint structure. The fix is to call iwch_ep_disconnect() instead of the low level disconnect functions so that the endpoint close timer is started correctly. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 24 2月, 2007 2 次提交
-
-
由 Steve Wise 提交于
Stop the ep timer in ec_status() if the status indicates a bad close. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Adrian Bunk 提交于
- don't mark static functions in C files as inline - gcc should know best whether inlining makes sense - never compile the unused cxio_dbg.c - make the following needlessly global functions static: - cxio_hal.c: cxio_hal_clear_qp_ctx() - iwch_provider.c: iwch_get_qp() - remove the following unused global functions: - cxio_hal.c: cxio_allocate_stag() - cxio_resource.: cxio_hal_get_rhdl() - cxio_resource.: cxio_hal_put_rhdl() Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 17 2月, 2007 1 次提交
-
-
由 Steve Wise 提交于
Remove the Open Grid Computing copyright. It shouldn't be there. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 13 2月, 2007 1 次提交
-
-
由 Steve Wise 提交于
Add an RDMA/iWARP driver for the Chelsio T3 1GbE and 10GbE adapters. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-