Make it possible to disable the block layer.  Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.

This patch does the following:

 (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
     support.

 (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
     an item that uses the block layer.  This includes:

     (*) Block I/O tracing.

     (*) Disk partition code.

     (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.

     (*) The SCSI layer.  As far as I can tell, even SCSI chardevs use the
     	 block layer to do scheduling.  Some drivers that use SCSI facilities -
     	 such as USB storage - end up disabled indirectly from this.

     (*) Various block-based device drivers, such as IDE and the old CDROM
     	 drivers.

     (*) MTD blockdev handling and FTL.

     (*) JFFS - which uses set_bdev_super(), something it could avoid doing by
     	 taking a leaf out of JFFS2's book.

 (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
     linux/elevator.h contingent on CONFIG_BLOCK being set.  sector_div() is,
     however, still used in places, and so is still available.

 (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
     parts of linux/fs.h.

 (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.

 (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.

 (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
     is not enabled.

 (*) fs/no-block.c is created to hold out-of-line stubs and things that are
     required when CONFIG_BLOCK is not set:

     (*) Default blockdev file operations (to give error ENODEV on opening).

 (*) Makes some /proc changes:

     (*) /proc/devices does not list any blockdevs.

     (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.

 (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.

 (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
     given command other than Q_SYNC or if a special device is specified.

 (*) In init/do_mounts.c, no reference is made to the blockdev routines if
     CONFIG_BLOCK is not defined.  This does not prohibit NFS roots or JFFS2.

 (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
     error ENOSYS by way of cond_syscall if so).

 (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
     CONFIG_BLOCK is not set, since they can't then happen.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Dissociate the generic_writepages() function from the mpage stuff, moving its
declaration to linux/mm.h and actually emitting a full implementation into
mm/page-writeback.c.

The implementation is a partial duplicate of mpage_writepages() with all BIO
references removed.

It is used by NFS to do writeback.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Move some functions out of the buffering code that aren't strictly buffering
specific.  This is a precursor to being able to disable the block layer.

 (*) Moved some stuff out of fs/buffer.c:

     (*) The file sync and general sync stuff moved to fs/sync.c.

     (*) The superblock sync stuff moved to fs/super.c.

     (*) do_invalidatepage() moved to mm/truncate.c.

     (*) try_to_release_page() moved to mm/filemap.c.

 (*) Moved some related declarations between header files:

     (*) declarations for do_invalidatepage() and try_to_release_page() moved
     	 to linux/mm.h.

     (*) __set_page_dirty_buffers() moved to linux/buffer_head.h.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

ratelimit_pages in page-writeback.c is recalculated (in set_ratelimit())
every time a CPU is hot-added/removed.  But this value is not recalculated
when new pages are hot-added.

This patch fixes that problem by calling set_ratelimit() when new pages
are hot-added.

[akpm@osdl.org: cleanups]
Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

page-writeback.c has a static local variable "total_pages", which is the
total number of pages in the system.

There is a global variable "vm_total_pages", which is the total number of
pages the VM controls.

Both are assigned from the return value of nr_free_pagecache_pages().

This patch removes the local variable and uses the global variable in that
place.

One more issue with the local static variable "total_pages" is that it is
not updated when new pages are hot-added.  Since vm_total_pages is updated
when new pages are hot-added, this patch fixes that problem too.
Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

lock_page needs the caller to have a reference on the page->mapping inode
due to sync_page, ergo set_page_dirty_lock is obviously buggy according to
its comments.

Solve it by introducing a new lock_page_nosync which does not do a sync_page.

akpm: unpleasant solution to an unpleasant problem.  If it goes wrong it could
cause great slowdowns while the lock_page() caller waits for kblockd to
perform the unplug.  And if a filesystem has special sync_page() requirements
(none presently do), permanent hangs are possible.

otoh, set_page_dirty_lock() is usually (always?) called against userspace
pages.  They are always up-to-date, so there shouldn't be any pending read I/O
against these pages.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Now that we can detect writers of shared mappings, throttle them.  Avoids OOM
by surprise.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Tracking of dirty pages in shared writeable mmap()s.

The idea is simple: write protect clean shared writeable pages, catch the
write-fault, make writeable and set dirty.  On page write-back clean all the
PTE dirty bits and write protect them once again.

The implementation is a tad harder, mainly because the default
backing_dev_info capabilities were too loosely maintained.  Hence it is not
enough to test the backing_dev_info for cap_account_dirty.

The current heuristic is as follows, a VMA is eligible when:
 - its shared writeable
    (vm_flags & (VM_WRITE|VM_SHARED)) == (VM_WRITE|VM_SHARED)
 - it is not a 'special' mapping
    (vm_flags & (VM_PFNMAP|VM_INSERTPAGE)) == 0
 - the backing_dev_info is cap_account_dirty
    mapping_cap_account_dirty(vma->vm_file->f_mapping)
 - f_op->mmap() didn't change the default page protection

Page from remap_pfn_range() are explicitly excluded because their COW
semantics are already horrid enough (see vm_normal_page() in do_wp_page()) and
because they don't have a backing store anyway.

mprotect() is taught about the new behaviour as well.  However it overrides
the last condition.

Cleaning the pages on write-back is done with page_mkclean() a new rmap call.
It can be called on any page, but is currently only implemented for mapped
pages, if the page is found the be of a VMA that accounts dirty pages it will
also wrprotect the PTE.

Finally, in fs/buffers.c:try_to_free_buffers(); remove clear_page_dirty() from
under ->private_lock.  This seems to be safe, since ->private_lock is used to
serialize access to the buffers, not the page itself.  This is needed because
clear_page_dirty() will call into page_mkclean() and would thereby violate
locking order.

[dhowells@redhat.com: Provide a page_mkclean() implementation for NOMMU]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Remove writeback state

We can remove some functions now that were needed to calculate the page state
for writeback control since these statistics are now directly available.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Conversion of nr_unstable to a per zone counter

We need to do some special modifications to the nfs code since there are
multiple cases of disposition and we need to have a page ref for proper
accounting.

This converts the last critical page state of the VM and therefore we need to
remove several functions that were depending on GET_PAGE_STATE_LAST in order
to make the kernel compile again.  We are only left with event type counters
in page state.

[akpm@osdl.org: bugfixes]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Conversion of nr_writeback to per zone counter.

This removes the last page_state counter from arch/i386/mm/pgtable.c so we
drop the page_state from there.

[akpm@osdl.org: bugfix]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This makes nr_dirty a per zone counter.  Looping over all processors is
avoided during writeback state determination.

The counter aggregation for nr_dirty had to be undone in the NFS layer since
we summed up the page counts from multiple zones.  Someone more familiar with
NFS should probably review what I have done.

[akpm@osdl.org: bugfix]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The current NR_FILE_MAPPED is used by zone reclaim and the dirty load
calculation as the number of mapped pagecache pages.  However, that is not
true.  NR_FILE_MAPPED includes the mapped anonymous pages.  This patch
separates those and therefore allows an accurate tracking of the anonymous
pages per zone.

It then becomes possible to determine the number of unmapped pages per zone
and we can avoid scanning for unmapped pages if there are none.

Also it may now be possible to determine the mapped/unmapped ratio in
get_dirty_limit.  Isnt the number of anonymous pages irrelevant in that
calculation?

Note that this will change the meaning of the number of mapped pages reported
in /proc/vmstat /proc/meminfo and in the per node statistics.  This may affect
user space tools that monitor these counters!  NR_FILE_MAPPED works like
NR_FILE_DIRTY.  It is only valid for pagecache pages.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

nr_mapped is important because it allows a determination of how many pages of
a zone are not mapped, which would allow a more efficient means of determining
when we need to reclaim memory in a zone.

We take the nr_mapped field out of the page state structure and define a new
per zone counter named NR_FILE_MAPPED (the anonymous pages will be split off
from NR_MAPPED in the next patch).

We replace the use of nr_mapped in various kernel locations.  This avoids the
looping over all processors in try_to_free_pages(), writeback, reclaim (swap +
zone reclaim).

[akpm@osdl.org: bugfix]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make notifier_calls associated with cpu_notifier as __cpuinit.

__cpuinit makes sure that the function is init time only unless
CONFIG_HOTPLUG_CPU is defined.

[akpm@osdl.org: section fix]
Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make notifier_blocks associated with cpu_notifier as __cpuinitdata.

__cpuinitdata makes sure that the data is init time only unless
CONFIG_HOTPLUG_CPU is defined.
Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When a writeback_control's `start' and `end' fields are used to
indicate a one-byte-range starting at file offset zero, the required
values of .start=0,.end=0 mean that the ->writepages() implementation
has no way of telling that it is being asked to perform a range
request.  Because we're currently overloading (start == 0 && end == 0)
to mean "this is not a write-a-range request".

To make all this sane, the patch changes range of writeback_control.

So caller does: If it is calling ->writepages() to write pages, it
sets range (range_start/end or range_cyclic) always.

And if range_cyclic is true, ->writepages() thinks the range is
cyclic, otherwise it just uses range_start and range_end.

This patch does,

    - Add LLONG_MAX, LLONG_MIN, ULLONG_MAX to include/linux/kernel.h
      -1 is usually ok for range_end (type is long long). But, if someone did,

		range_end += val;		range_end is "val - 1"
		u64val = range_end >> bits;	u64val is "~(0ULL)"

      or something, they are wrong. So, this adds LLONG_MAX to avoid nasty
      things, and uses LLONG_MAX for range_end.

    - All callers of ->writepages() sets range_start/end or range_cyclic.

    - Fix updates of ->writeback_index. It seems already bit strange.
      If it starts at 0 and ended by check of nr_to_write, this last
      index may reduce chance to scan end of file.  So, this updates
      ->writeback_index only if range_cyclic is true or whole-file is
      scanned.
Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Nathan Scott <nathans@sgi.com>
Cc: Anton Altaparmakov <aia21@cantab.net>
Cc: Steven French <sfrench@us.ibm.com>
Cc: "Vladimir V. Saveliev" <vs@namesys.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NCoywolf Qi Hunt <qiyong@fc-cn.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch updates the comments to match the actual code.
Signed-off-by: NMartin Waitz <tali@admingilde.org>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>

We need set_page_dirty() to return true if it actually transitioned the page
from a clean to dirty state.  This wasn't right in a couple of places.  Do a
kernel-wide audit, fix things up.

This leaves open the possibility of returning a negative errno from
set_page_dirty() sometime in the future.  But we don't do that at present.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Modify balance_dirty_pages_ratelimited() so that it can take a
number-of-pages-which-I-just-dirtied argument.  For msync().
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make that the internal value for /proc/sys/vm/laptop_mode is stored as
jiffies instead of seconds.  Let the sysctl interface do the conversions,
instead of doing on-the-fly conversions every time the value is used.

Add a description of the fact that laptop_mode doubles as a flag and a
timeout to the comment above the laptop_mode variable.
Signed-off-by: NBart Samwel <bart@samwel.tk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make that the internal values for:

/proc/sys/vm/dirty_writeback_centisecs
/proc/sys/vm/dirty_expire_centisecs

are stored as jiffies instead of centiseconds.  Let the sysctl interface do
the conversions with full precision using clock_t_to_jiffies, instead of
doing overflow-sensitive on-the-fly conversions every time the values are
used.

Cons: apparent precision loss if HZ is not a multiple of 100, because of
conversion back and forth.  This is a common problem for all sysctl values
that use proc_dointvec_userhz_jiffies.  (There is only one other in-tree
use, in net/core/neighbour.c.)
Signed-off-by: NBart Samwel <bart@samwel.tk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Ravikiran reports that this variable is bouncing all around nodes on NUMA
machines, causing measurable performance problems.  Fix that up by only
writing to it when it actually changed.

And put it in a new cacheline to prevent it sharing with other things (this
happened).
Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

 NFS needs to be able to distinguish between single-page ->writepage() calls and
 multipage ->writepages() calls.

 For the single-page writepage calls NFS can kick off the I/O within the
 context of ->writepage().

 For multipage ->writepages calls, nfs_writepage() will leave the I/O pending
 and nfs_writepages() will kick off the I/O when it all has been queued up
 within NFS.

 Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

2.6.14 has this exported, and reiser4 (at least) uses it.  Put things back
the way they were.
Signed-off-by: NVladimir V. Saveliev <vs@namesys.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I didn't find any possible modular usage in the kernel.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clean up timer initialization by introducing DEFINE_TIMER a'la
DEFINE_SPINLOCK.  Build and boot-tested on x86.  A similar patch has been
been in the -RT tree for some time.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some KernelDoc descriptions are updated to match the current code.
No code changes.
Signed-off-by: NMartin Waitz <tali@admingilde.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!