* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  async_xor: dma_map destination DMA_BIDIRECTIONAL
  dmaengine: protect 'id' from concurrent registrations
  ioat: wait for self-test completion

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  avr32: favr-32 build fix
  ATSTK1006: Fix boot from NAND flash
  avr32: remove .note.gnu.build-id section when making vmlinux.bin
  avr32: Enable pullup on USART TX lines

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  bnx2: Fix bug in bnx2_free_rx_mem().
  irda: Add irda_skb_cb qdisc related padding
  jme: Fixed a typo
  net: kernel BUG at drivers/net/phy/mdio_bus.c:165!
  drivers/net: starfire: Fix napi ->poll() weight handling
  tlan: Fix pci memory unmapping
  enc28j60: use netif_rx_ni() to deliver RX packets
  tlan: Fix small (< 64 bytes) datagram transmissions
  netfilter: ctnetlink: fix missing CTA_NAT_SEQ_UNSPEC

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: We need to implement arch_ptrace_stop().

Update John McCutchan and Robert Love's email addresses for
maintenance of inotify
Signed-off-by: NJohn McCutchan <john@johnmccutchan.com>
Acked-by: NRobert Love <rlove@rlove.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The favr-32 board code still refers to the old asm/arch header files
which were moved to mach/ some time ago.
Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>

Enable JFFS2 write buffer support so that the kernel can access a root
filesystem in NAND flash.
Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>

DMA memory for the jumbo rx page rings was freed incorrectly using the
wrong local variable as the array index.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to pad irda_skb_cb in order to keep it safe accross dev_queue_xmit()
calls. This is some ugly and temporary hack triggered by recent qisc code
changes.
Even though it fixes bugzilla.kernel.org bug #11795, it will be replaced by a
proper fix before 2.6.29 is released.
Signed-off-by: NSamuel Ortiz <samuel@sortiz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'i2c-fixes' of git://aeryn.fluff.org.uk/bjdooks/linux:
  i2c-s3c2410: fix check for being in suspend.
  i2c-cpm: Detect and report NAK right away instead of timing out

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: Add JBD2 compat feature bit.
  ocfs2: Always update xattr search when creating bucket.

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: pl2303: add id for Hewlett-Packard LD220-HP POS pole display
  USB: set correct configuration in probe of ti_usb_3410_5052
  USB: add 5372:2303 to pl2303
  USB: skip Set-Interface(0) if already in altsetting 0
  USB: fix comment about endianness of descriptors
  USB: Documentation/usb/gadget_serial.txt: update to match driver use_acm behaviour
  usbmon: drop bogus 0t from usbmon.txt
  USB: gadget: fix rndis working at high speed
  USB: ftdi_sio: Adding Ewert Energy System's CANdapter PID
  USB: tty: SprogII DCC controller identifiers
  usb-storage: update unusual_devs entry for Nokia 5310
  USB: Unusual devs patch for Nokia 3500c
  USB: storage: unusual_devs.h: Nokia 3109c addition
  USB: fix problem with usbtmc driver not loading properly

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  STAGING: Move staging drivers back to staging-specific menu
  driver core: add newlines to debugging enabled/disabled messages
  xilinx_hwicap: remove improper wording in license statement
  driver core: fix using 'ret' variable in unregister_dynamic_debug_module

While testing a kernel with memory poisoning enabled, I saw some warnings
about the redzone getting clobbered when chasing DFS referrals. The
buffer allocation for the unicode converted version of the searchName is
too small and needs to take null termination into account.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Acked-by: NSteve French <sfrench@us.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc:
  powerpc: Fix corruption error in rh_alloc_fixed()
  powerpc/fsl-booke: Fix the miss interrupt restore

Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Both messages are missing the newline and thus dmesg output gets
scrambled.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

GPLv2 doesn't allow additional restrictions to be imposed on any
code, so this wording needs to be removed from these files.
Signed-off-by: NStephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The 'ret' variable is assigned, but not used in the return statement. Fix this.
Signed-off-by: NJohann Felix Soden <johfel@users.sourceforge.net>
Acked-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add id for the Hewlett-Packard LD220-HP POS pole display.

Bus 002 Device 002: ID 03f0:3524 Hewlett-Packard
Signed-off-by: NMike Provencher <mike.provencher@hp.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This driver transfers firmware. It may just as well set the correct
configuration.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds the "Superial" USB-Serial converter to pl2303 so that it
is detected, by the correct driver.  Adds the relevant vendor:product
(5372:2303) to the device tables in pl2303.c & pl2303.h.  The patch has
been tested against 2.6.24-22-generic.
Signed-off-by: NMatthew D Arnold <matthew.arnold-1@uts.edu.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When a driver unbinds from an interface, usbcore always sends a
Set-Interface request to reinstall altsetting 0.  Unforunately, quite
a few devices have buggy firmware that crashes when it receives this
request.

To avoid such problems, this patch (as1180) arranges to send the
Set-Interface request only when the interface is not already in
altsetting 0.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch fixes a comment and clarifies the documentation about the
endianness of descriptors. The current policy is that descriptors will
be little-endian at the API even on big-endian systems; however the
/proc/bus/usb API predates this policy and presents descriptors with
some multibyte fields byte-swapped.
Signed-off-by: NPhil Endecott <usb_endian_patch@chezphil.org>
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Commit 7bb5ea54 (usb gadget serial: use composite gadget framework)
changed the default for the use_acm parameter from 0 to 1.
Update the documentation to match.
Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The example is incorrect: there is no 0t socket (the '1t' format has no
bus number in it). Also, correct the broken sentence for USB Tag.
Signed-off-by: NPete Zaitcev <zaitcev@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix a bug specific to highspeed mode in the recently updated RNDIS
support:  it wasn't setting up the high speed notification endpoint,
which prevented high speed RNDIS links from working.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Tested-by: NAnand Gadiyar <gadiyar@ti.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The following patch adds in the USB PID for Ewert Energy System's CANdapter
device (CANBUS to USB-Serial which uses the FTDI 245R chipset) to the ftdi_sio
device driver.

The patch was tested successfully on Linux kernel 2.6.27 under Ubuntu.

Relevant output from /proc/bus/usb/devices (With patch installed):

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0403 ProdID=9f80 Rev= 6.00
S:  Manufacturer=Ewert Energy Systems
S:  Product=CANdapter
S:  SerialNumber=A6RGB3Z3
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 90mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
Signed-off-by: NAndrew Ewert <andrew@ewertenergy.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Someone on rmweb reminded me this had been overlooked from ages ago..

Add the identifiers for the Sprog II USB. This is a DCC control interface
using the FTDI-SIO hardware: http://www.sprog-dcc.co.uk/. People have been
using it with insmod options for ages, this just puts it into the driver
data.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1179) updates the unusual_devs entry for Nokia's 5310
phone to include a more recent firmware revision.

This fixes Bugzilla #12099.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Tested-by: NRobson Roberto Souza Peixoto <robsonpeixoto@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0421 ProdID=0060 Rev= 5.51
S:  Manufacturer=Nokia
S:  Product=Nokia 3500c
S:  SerialNumber=357687010280751
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

From: Ozan Sener <themgzzy@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

2.6.26(.x, cannot remember) could handle the microSD card in my Nokia
3109c attached via USB as mass storage, 2.6.27(.x, up to and included
2.6.27.8) cannot. Please find the attached patch which fixes this
regression, and a copy of /proc/bus/usb/devices with my phone plugged in
running with this patch on Frugalware.

T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0421 ProdID=0063 Rev= 6.01
S:  Manufacturer=Nokia
S:  Product=Nokia 3109c
S:  SerialNumber=359561013742570
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

From: CSÉCSY László <boobaa@frugalware.org>
Cc: Phil Dibowitz <phil@ipom.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The usbtmc driver forgot to export its device table to userspace.
Without this, it is never loaded properly when such a device is seen by
the system.

Cc: Marcel Janssen <marcel.janssen@admesy.nl>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

There is an error in rh_alloc_fixed() of the Remote Heap code:
If there is at least one free block blk won't be NULL at the end of the
search loop, so -ENOMEM won't be returned and the else branch of
"if (bs == s || be == e)" will be taken, corrupting the management
structures.
Signed-off-by: NGuillaume Knispel <gknispel@proformatique.com>
Acked-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The commit e5e774d8
powerpc/fsl-booke: Fix problem with _tlbil_va being interrupted
introduce one issue. that casue the problem like this:

Kernel BUG at c00b19fc [verbose debug info unavailable]
Oops: Exception in kernel mode, sig: 5 [#1]
MPC8572 DS
Modules linked in:
NIP: c00b19fc LR: c00b1c34 CTR: c0064e88
REGS: ef02b7b0 TRAP: 0700   Not tainted  (2.6.28-rc8-00057-g1bda7128)
MSR: 00021000 <ME>  CR: 44048028  XER: 20000000
TASK = ef02c000[1] 'init' THREAD: ef02a000
GPR00: 00000001 ef02b860 ef02c000 eec201a0 c0dec2c0 00000000 000078a1 00000400
GPR08: c00b4e40 000078a1 c048ec00 a1780000 44048028 ecd26917 00000001 ef02b948
GPR16: ffffffea 0000020c 00000000 00000000 00000003 0000000a 00000000 000078a1
GPR24: eec201a0 00000000 ed849000 00000400 ef02b95c 00000001 ef02b978 ef02b984
NIP [c00b19fc] __find_get_block+0x24/0x238
LR [c00b1c34] __getblk+0x24/0x2a0
Call Trace:
[ef02b860] [c017b768] generic_make_request+0x290/0x328 (unreliable)
[ef02b8b0] [c00b1c34] __getblk+0x24/0x2a0
[ef02b910] [c00b4ae4] __bread+0x14/0xf8
[ef02b920] [c00fc228] ext2_get_branch+0xf0/0x138
[ef02b940] [c00fcc88] ext2_get_block+0xb8/0x828
[ef02ba00] [c00bbdc8] do_mpage_readpage+0x188/0x808
[ef02bac0] [c00bc5b4] mpage_readpages+0xec/0x144
[ef02bb50] [c00fba38] ext2_readpages+0x24/0x34
[ef02bb60] [c006ade0] __do_page_cache_readahead+0x150/0x230
[ef02bbb0] [c0064bdc] filemap_fault+0x31c/0x3e0
[ef02bbf0] [c00728b8] __do_fault+0x60/0x5b0
[ef02bc50] [c0011e0c] do_page_fault+0x2d8/0x4c4
[ef02bd10] [c000ed90] handle_page_fault+0xc/0x80
[ef02bdd0] [c00c7adc] set_brk+0x74/0x9c
[ef02bdf0] [c00c9274] load_elf_binary+0x70c/0x1180
[ef02be70] [c00945f0] search_binary_handler+0xa8/0x274
[ef02bea0] [c0095818] do_execve+0x19c/0x1d4
[ef02bed0] [c000766c] sys_execve+0x58/0x84
[ef02bef0] [c000e950] ret_from_syscall+0x0/0x3c
[ef02bfb0] [c009c6fc] sys_dup+0x24/0x6c
[ef02bfc0] [c0001e04] init_post+0xb0/0xf0
[ef02bfd0] [c046c1ac] kernel_init+0xcc/0xf4
[ef02bff0] [c000e6d0] kernel_thread+0x4c/0x68
Instruction dump:
4bffffa4 813f000c 4bffffac 9421ffb0 7c0802a6 7d800026 90010054 bf210034
91810030 7c0000a6 68008000 54008ffe <0f000000> 3d20c04e 3b29ffb8 38000008

The issue was the beqlr returns early but we haven't reenabled interrupts.
Signed-off-by: NDave Liu <daveliu@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This patch will remove the section .note.gnu.build-id added in binutils
2.18 from the vmlinux.bin binary. Not removing this section results in a
huge multiple gigabyte binary and likewize large uImage.
Signed-off-by: NHans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>

Found a typo.
Signed-off-by: NWei-Min Chen <cwm97m@cse.nsysu.edu.tw>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

kernel BUG at drivers/net/phy/mdio_bus.c:165!
Unable to handle kernel NULL pointer dereference at virtual address 00000000

How?

mdiobus_alloc() sets bus->state = MDIOBUS_ALLOCATED.

mdiobus_register() sets bus->state = MDIOBUS_REGISTERED but then can
   fail (mdiobus_scan()) returning an error to the caller.

The caller aborts correctly with mdiobus_free() which does:
        if (bus->state == MDIOBUS_ALLOCATED) {
                kfree(bus);
                return;
        }

        BUG_ON(bus->state != MDIOBUS_UNREGISTERED);
Signed-off-by: NKrzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to always provide fully synchronized state to the debugger,
we might need to do a synchronize_user_stack().

A pair of hooks, arch_ptrace_stop_needed() and arch_ptrace_stop(),
exist to handle this kind of situation.  It was created for
the sake of IA64.

Use them, to flush the kernel side cached register windows
to the user stack, when necessary.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>